Used Start Hole Drilling Machine for sale (98,443)

Condition: used, Year of construction: 2000, Number of spindles in row: 11 Number of horizontal spindles: 3 Cup hinge boring head: yes, Blum Drill pitch: 32mm Isdpfx Aoxc Hi Ujg Neih Power consumption: 2.2kW Drilling unit: swiveling

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: JM325D, HGH start hole EDM machine, fully functional incl. documentation for sale. Iiodjxnba Espfx Ag Neh

Condition: good (used), Year of construction: 2016, X-Axis Travel (mm): X-Axis Travel (mm): Iedpfx Agow Tc Hfs Noih X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Year of construction: 2000, condition: refurbished (used), LOCH Deep hole drilling machine TB 1-4/E-600/2 (reconditioned used machine) Working depth: max. 600 mm Working diameter: solid drilling 4 - 25 mm diameter in steel Number of spindles: 2 deep drilling spindles maintenance-free with lifetime grease lubrication Drilling spindle receptacle: Short taper according to DIN 55027, size 5 Center height: 250 mm Iodsikqrfspfx Ag Neih Center distance: 203.2 mm Drilling system: single lip drilling Main drive: 2 x 5.5 kW drive power per spindle, steplessly adjustable by frequency regulated three-phase motor, power constant for the entire speed range. Speed range: 1000 - 6000 min-1 Feed rate: Through infinitely variable three-phase servo drive via recirculating ball screw and backlash-free preloaded nut. Feed range: 0 - 300 mm/min Extended feed range on request possible up to max. 6000 mm/min Rapid traverse: 6000 mm/min back and forth Coolant supply: Internal coolant supply through drill spindle via carbide mechanical seal. Spindle slide: Stable construction with mounted spindle spindle blocks in special construction, whereby the spindle bearings are provided with lifetime lubrication and are maintenance-free. Guide system: Machine bed with screwed-on, hardened and ground linear guides. Spindle slide moves via circulating rolling elements, feed vibration-free and without stick-slip effect. Drill bush support: Firmly connected to the substructure and with removable upper part for easy and quick change of drill bushings or the coolant supply units. Machine base: Strongly dimensioned welded construction, stress-relieved annealed. Clamping table: Table plate in special cast design firmly mounted on the substructure with T-slots, whereby the center groove is aligned with the drilling axis and serves as a guide groove for the accommodation of clamping elements. Control: SIEMENS Sinumerik 840 D (Retrofit) Workflow: Individual functions for setting up the machine via pushbutton control. Semi-automatic for manual loading via program start. Machine monitoring: With display of spindle speed, feed rate, drilling depth and coolant pressure. Protective device: The tool area of the machine is protected by a sliding door, which is electrically linked to the control, against unintentional and unauthorized opening during during the working process. Electrical equipment: All electric motors according to IEC standard. Separate electrical cabinet with all electrical necessary for the operation of the plant safety and control equipment. Machine operation from control panel conveniently located in the working area. Machine can be inspected and tested at any time if interested. MORE INFO ON REQUEST

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 340 mm, workpiece weight (max.): 300 kg, table width: 600 mm, table length: 300 mm, Equipment: documentation/manual, Double-disc surface grinding machine with belt filtration unit for surface grinding of steel and carbide parts. Convertible for grinding with only one grinding wheel. Machine ready for demonstration. Iiedjxbg S Hspfx Ag Njh

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Isdpfjwyup Tox Ag Nsih Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: reconditioned (used), -Drilling diameter 5~25 mm -Drilling depth 1500 mm -Tailstock Iisdpfx Aohuil Rog Neh -Tank -pump -Filter

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 00-1646/1, drilling depth: 700 mm, workpiece weight (max.): 10,000 kg, travel distance X-axis: 1,670 mm, travel distance Y-axis: 1,040 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, type of input current: three-phase, table load: 10,000 kg, travel distance W-axis: 440 mm, Equipment: chip conveyor, • Manufacturer Buck Maschinenbau GmbH !!! Special price 95,000 !!! • Machine number 00-1646/1 • Working area (mm): X 1,600, Y 1,200, Z 1,600 • W-axis 500 mm, B-axis, A-axis swivels 19° • Full machine enclosure • Chip conveyor and high-pressure coolant system • Tool holder SK50 • Heidenhain TNC 430 control • Table load capacity 10 tons workpiece weight • Spindle speed 4,000 RPM • Rapid traverse 20 m per minute • Tool changer for 20 tools Iedpfxju Hzqce Ag Neih • Machine can be inspected under power at any time by appointment

Condition: ready for operation (used), Year of construction: 2008, An Agie start hole drilling machine for the EDM industry is available. Travel X/Y/Z: 300mm/200mm/300mm, electrode diameter: 0.3mm-3mm, max. drilling depth: 200mm, table dimensions X/Y: 400mm/300mm, max. workpiece weight: 300kg. Machine dimensions X/Y/Z: approx. 1400mm/900mm/2000mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. Iijdpju Ilbujfx Ag Noh

Year of construction: 1990, condition: used, Weigl ER - 1500 Brief description: Start hole eroding machines Waldmann & Description: Immediately available from site : Start hole eroding machines Waldmann & Weigl Type ER - 1500 Year of manufacture 1990 table size 500 x 500 mm installation height 400 mm twist drill 0,1 - 20 mm taps M 2 - M 20 electrodes 1 - 12 mm drilling machine Interkrenn Economy 280 S height adjustment 700 mm throat 180 mm Ijdpfx Aenzh Ivsg Neih quill stroke 80 mm speed range 120 - 2580 rpm Tool holder MK 2

Condition: good (used), MEWAG - IXION TL 500 Deep Hole Drilling Machine - Drilling depth approx. 500 mm Iijdpfx Agewm Hclj Nsh - Table size 800 x 450 mm - Support/drilling table rotatable and angle adjustable from 0 to 360 degrees - Manual drilling stroke - Drill chuck - Various deep hole drills - Connection cable Dimensions: L x W x H 1.6 x 0.8 x 1.6 meters / Weight 1300 kg Subject to errors / mistakes

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Isdpfx Aewx E N Ijg Noih Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives

Condition: like new (used), Year of construction: 2022, Electrodes: Diameter from 0.3 mm to 3 mmSpindle head Z-axis travel: 280 mm7J axis spindle travel: 380 mmSingle-channel electrode length: 400 mmMaximum spindle feed rate: 1500 mm/minWorktable dimensions: 440 mm x 320 mmManual X and Y axis travel: X = 400 mm, Y = 300 mmMaximum distance between guide and table: 300 mmMaximum current: 30 ASpindle rotation speed: 0–200 rpm (adjustable)Maximum power: 4 KWPower supply: 380V / 50 HzAxis readout: 3 axesWater pressure: 8 MPaMaximum table load capacity: 380 KGWorking fluid: Deionized waterWater tank with pump: Electric pump includedIncluded accessories: Chuck, 2 guides (0.5 mm and 1 mm), sealing joints, single-channel electrode tubes Iiedpfxownffno Ag Nsh The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Iedpfxsw Izr Ao Ag Nsih Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Iijdpfev A Uw Djx Ag Noh Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: ready for operation (used), Year of construction: 2017, Deep hole drilling machine Machine type: Samag TFZ 2L-1000 Control system: Year of manufacture: 2017 TECHNICAL DATA: Speed range: 6,000 rpm Drive power: 13 kW Maximum drilling diameter: 36 mm Maximum drilling depth: 1,250 mm Travels: X-axis: 1,600 mm Iiodpfxjw Ecftj Ag Noh Y-axis: 1,050 mm Z-axis: 1,100 mm Max. workpiece weight: 7,000 kg Max. workpiece length: 1,600 mm Milling & deep hole drilling Design with double ball screw drive Coolant system & filtration Tool package

Condition: good (used), A hole row drilling machine from Knoevenagel is offered here. Data: Table size: 58 x 43 cm (with a scale of 0-50 cm) The table is height-adjustable and tiltable Iiodped Sdurefx Ag Njh VGC 18809 420 V 4.0A 15 spindles All further information as well as the condition can be found in the pictures.

Condition: ready for operation (used), A 3-spindle deep hole drilling machine is available. 1) Deep hole drilling unit, travel X/Y/Z: 14000mm/300mm/2650mm, drilling spindles: 3, spindle distance: 325mm–375mm, motor power: 22kW, table dimensions X/Y: 6000mm/4000mm, number of tables: 2, max. workpiece weight: 50000kg/table, max. workpiece dimensions X/Y: 12000mm/4000mm, max. drilling diameter: 65mm. 2) Milling unit, travel X: 14000mm, max. milling diameter: 52mm, milling spindle power 1/2: 8.7kW/13kW. 3) Column drilling unit Soraluce TR1-1250, travel X: 14000mm, drilling diameter: 50mm. Includes heating plates, heated decoiling plates, steam plate, chip conveyor, partial NC control Mitsubishi, and various tools and clamping devices. Documentation available. An on-site inspection is possible. Ijdpfx Aew Extyjg Njih

Condition: good (used), Year of construction: 1997, High-speed EDM drilling machine, KOTON Type: EDM-KTH-202A.. In good condition with cooling and filter unit. Machine documentation available. See data sheet for specifications. Iisdjwmn Szjpfx Ag Nsh

Condition: used, Hole rows + fitting drilling machine LAUTENSCHLÄGER Meplamat 300 pneumatic hold-down device, Iisdpfx Ajvtm Ayog Noh pressing device, stop rulers

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Iijdpfx Agovn Sv Uj Nsh Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: good (used), Year of construction: 2008, CNC Deep Hole Drilling Center Machine type: Degen UTB800/G Ijdjwxaf Repfx Ag Neih Control: Heidenhain TNC310 Year of manufacture: 2008 TECHNICAL DATA: Travel distances: X-axis: 630 mm Y-axis: 400 mm Z-axis: 800 mm W-axis: 600 mm Feed rate: 6,000 mm/min Swivel range: Z: +/- 10° Table size: 1,100 x 650 mm Max. table load: 2,000 kg Tool holder: HSK 63 Max. speed: 4,000 rpm Drive power: 7.5 / 5.5 kW Drilling diameter: 4–25 mm Accessories: Electronic handwheel High-pressure pumps Internal cooling (IKZ): 0–90 bar Coolant tank: 600 l Paper band filter

Condition: not inspected (used), Year of construction: 1979, functionality: unexamined, machine/vehicle number: 419.324.012, drilling depth: 1,200 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 1,400 rpm, table length: 1,050 mm, table width: 1,050 mm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Drilling depth: 1,200 mm Spindle speed: 50 – 3,000 rpm Centre height: 240 – 1,040 mm Table length: 1,050 mm Table width: 1,050 mm Centre height above table: 240 – 1,040 mm Feed rate series 2: 18 – 160 mm/min, 35 – 320 mm/min Rated motor speed: 233 – 2,100 / 465 – 4,200 rpm Rapid traverse speed: 3.5 m/min Rated motor speed: 1,400 rpm Rated motor power: 0.75 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 25 kW Overall length: 6,500 mm Overall width: 3,500 mm Overall height: 2,900 mm Weight: 8 t Iijdpfxswvi Iie Ag Nsh EQUIPMENT 3-axis digital readout by Heidenhain Including coolant unit

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Power connection: 7.5 kW Iiodpjw Elrvefx Ag Nsh Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: used, GANNOMAT Compact 30 hole drilling machine - used - pneumatic clamps, foot control, 2 drilling beams with 15 spindles each ----- Technical specifications ----- Number of spindles: 30, Drill spindle spacing: 32 mm, Motor power: 2 x 0.75 kW, Voltage: 400 volts, Pneumatic connection: 6 bar, Iodpewmmt Rofx Ag Noih Dimensions without stop ruler: 850 x 1,100 mm, Weight: 240