Used Steam Sterilizer Autoclave for sale (1,021)

Condition: new, Safety valve ARI for steam systems. Dcodezbr Rvopfx Aphoi

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 35220, pressure: 10 bar, nominal heat output: 5,057 kW (6,875.60 HP), Used high-pressure steam boiler - Steam output: 7,000 kg/h - Economizer - Mixing cooler - Dual-fuel burner: Weishaupt WM-GL-50 (including sound insulation hood) - Double pump station: Grundfos CR10-12 - Oil suction unit - Standby operation (72 hours) Djdpfx Apoy Ukcrehoci - All necessary fittings are included - If interested: steam accumulator 25 m³ Boiler and accumulator have been dry-stored since 2024. Control system can still be tested. Excluding dismantling (EXW). Documents, photos, and information (TÜV inspection, burner maintenance, etc.) available upon request.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, - High-pressure cleaner PTC TORPEDO MINI-E 3.8 M 230/50 Powersteam and TORPEDO MINI-E 5.8 T 400/50 Powersteam – similar, but not a Dynajet, Oertzen, Falch, etc. - Cold water / hot water / steam 32 bar up to 140°C / high-pressure steam 150 or 200 bar up to 150°C for cleaning and disinfecting. The following models are available: - TORPEDO MINI-E 3.8 M 230 Volt/50 Hz Powersteam, 8 l/min at 150 bar Djdpfx Apefh Skaehsci - TORPEDO MINI-E 5.8 T 400 Volt/50 Hz Powersteam, 8 l/min at 200 bar - Dimensions and empty weight: 110x64x98 cm, approx. 150 kg - Includes 10 m high-pressure hose, spray gun, lance, and flat spray nozzle 25°.

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Dcodpfx Ajxzg N Eephei Good working and cosmetic condition. The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 Djdpfx Apoy D Hy Eohsci • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, Technical parameters: • Manufacturer: Nouvo Pignone • Type: ENK 32/45 (1999) extraction-condensing turbine • Nominal output of steam turbine set MWe: 10.2 • Maximum output of steam turbine set MWe: 11.2 • Number of casings: pcs: 1 Dcedpfx Aoy Drbusphei • Live steam parameters: bar/°C: 40 / 420 • LP steam parameters: bar/°C: 4.0 / 180 • Live steam flow: t/h: 40.8 • IP steam flow: t/h: 15.5 • Pressure in the condenser: bar: 0.14 • Operating hours: 76,000 hours Without control and protection system!

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, machine/vehicle number: 516950, Basic data: • Manufacturer: BHS Cincinatti • Type: AD 63T • Serial number: 516950 • Year of manufacture: 1999 • Rated power: 11,700 kW • Gear ratio: 1500/7555 Dcodpfey Drd Asx Aphsi • Operating hours: 76,000 hours Last gearbox inspection was performed in 2007; bearing and gear inspection is recommended.

Condition: ready for operation (used), Year of construction: 1991, A professionally dismantled and preserved steam boiler system with a Loos steam boiler and Weishaupt burner is available. 1) Loos UL steam boiler, year of construction: 1991, max. steam output: 6000kg/h, max. operating overpressure: 16bar. 2) Dual fuel burner Weishaupt Monarch RGL 60/2-A, year of construction: 1991, version: ZM, output range: 800kW-6600kW, gas type: N, gas category: I, gas setting pressure range: 30mbar-170mbar, oil throughput range: 120kg/h-556kg/h. Documentation available. An on-site inspection is possible. Dcodpfx Aoy Ndgtophsi

Condition: used, Year of construction: 1995, De Dietrich Industrial Boiler – Type GT 517 Manufacturer: De Dietrich (France) Model: GT 517 Year of manufacture: 1995 Djdpfx Ajyntqwjpheci Technical data (from nameplate): Water capacity: 789 liters Heat output (Germany): 775–820 kW Oil/Gas input range: 845–900 kW Heat flow: 761–978 kW Maximum operating temperature: 120°C Maximum working pressure: 6 bar Voltage: 230V / 50 Hz Electrical power: 100 / 200 W Heat exchange surface: 28.46 m² Made in France Burner: Weishaupt gas burner Control: York International control panel (Gas burner 1) Condition / sale terms: Used unit, offered as-is, as seen

Year of construction: 2019, condition: good (used), functionality: fully functional, Optima Steamer DMF Diesel Steam Cleaner, 2 steam outlets, accessories included, good condition / refurbished by dealer Dcodjy Hlcqspfx Aphji

Condition: used, Year of construction: 2017, functionality: fully functional, ATTSU GE-45 ELECTRIC STEAM GENERATOR / BOILER (2017) Electric steam generator manufactured by ATTSU (Spain), model GE-45, year 2017. From an industrial company liquidation (insolvency proceedings) — fully functional, not from a breakdown. ═════ SPECIFICATIONS ═════ - Manufacturer: ATTSU (renowned Spanish steam technology manufacturer) Dodpfxezbg Sus Aphsci - Model: GE-45 - Year of manufacture: 2017 - Type: Electric steam generator (NO burner, NO fuel/gas needed) - Steam production: approximately 45 kg/h - Max working pressure: [TO BE CONFIRMED] - Electric power: [TO BE CONFIRMED] - Voltage: 380V three-phase, 50 Hz - Tank capacity: [TO BE CONFIRMED] - Construction: robust steel frame - Approximate weight: 250 kg ═════ KEY ADVANTAGES OF THIS UNIT ═════ - ELECTRIC heating — no fuel, no burner, no chimney needed - Recent unit (2017) — relatively low usage - Cleaner installation than diesel/gas boilers - Simpler maintenance than combustion boilers - No fuel storage tanks required - Lower regulatory burden (no combustion permits) - Modern controls and safety systems ═════ CONDITION ═════ - Used, from industrial closure (NOT from a breakdown) - Recent unit, only 8-9 years old - In good condition, fully functional - Sold as-is, full inspection welcome before pickup - CE certification visible on nameplate - No warranty implied - Buyer responsible for new registration if required in destination country ═════ ABOUT THE MANUFACTURER ═════ ATTSU is a leading Spanish manufacturer of steam generation equipment, founded in 1959 and still active today. ATTSU products are known for quality construction, durability, and excellent technical support availability. Spare parts and service support are available throughout Europe and worldwide. Original ATTSU GE-45 new unit price (current market): €18,000-25,000. ═════ APPLICATIONS ═════ Suitable for: - Small to medium industrial processes requiring clean steam - Food and beverage processing - Pharmaceutical and cosmetics production - Laundry and dry cleaning operations - Textile finishing and dyeing - Chemical and laboratory processes - Pilot plants and R&D facilities - Sterilization processes - HVAC and humidification systems ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: approx. 250 kg - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice and original nameplate - International shipping possible — buyer arranges transport IMPORTANT FOR INTERNATIONAL BUYERS: Steam generators are pressure equipment regulated under European PED 2014/68/EU directive. The unit has its original CE certification. Buyers in EU countries should verify local registration requirements Keywords: ATTSU GE-45, electric steam generator, electric steam boiler, 45 kg/h steam, industrial steam, clean steam boiler, generador de vapor eléctrico, caldera de vapor.

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Dsdpfx Aow Ev Twepheci Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.

Year of construction: 2003, condition: good (used), functionality: fully functional, Equipment: documentation/manual, ITALMATIC Dodpfxjy N Ubbs Aphjci Autoclave AIT ø 2600x5000 year 2003, in good condition, available now, fully functional P.S.: 13 barg Tmin/Tmax: +20 / +175 C Volume V: 33900 litres Fluid group 2: AIR Module: B+F Test Pressure TP: 20,7 barg CAT.: IV Inspection is possible by appointment.

Condition: good (used), Year of construction: 1993, functionality: fully functional, pressure: 10 bar, nominal heat output: 1,140 kW (1,549.97 HP), tank capacity: 1,740 l, manhole location: front, empty load weight: 4,200 kg, Industrial steam boiler LOOS U-HD-1600 in excellent condition for sale. With full documentation with Weishaupt G7/1-D gas burner Manufacturer: LOOS Gunzenhausen Type: U-HD 1600 Year of manufacture: 1993 Djdpfxeym Tugj Aphjci Full inspection: 2017 Boiler capacity max.: 1600 kg/h Operating pressure: 10 bar Fire output: 1186 kW Gas burner: Weishaupt G7/1-D 300-1750kw Water capacity: 1740 liters Total heating surface: 31 m² Test pressure: 18 bar Increased test pressure: 18 bar Year of manufacture: 1993 Full documentation!!! length: 4 meters (including gas burner) Width: 2.2 meters Height: 2.3 meters Weight: 4200kg ca

Year of construction: 2008, condition: good (used), Industrial stainless stell humidifier , steam generator Outdoor unit 4x8 kw heating wire 32kW Dcedpfx Apsfl Iqujhji 160 ° C max

Condition: excellent (used), Year of construction: 1998, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, 1998 CPV 20FT swap body tank container Dcjdpsytpzvefx Aphei 31,180L / 1 compartment bottom discharge UN PORTABLE, T11 AMKD steam heating inspection valid for 2.5 years/CSC until 08/2026 = Further information = General Information Year of manufacture: July 1998 Model year: 1998 Usable material: Chemicals Weights Empty weight: 4,100 kg Payload: 29,900 kg Gross weight: 34,000 kg Functionality Loading compartment volume: 26,000 l Superstructure brand: HOLVRIEKA 26,000L TC, 1 comp., L4BN, IMO-1, T11 Number of compartments: 1 Condition Technical condition: very good Visual condition: very good

Condition: like new (used), Year of construction: 2006, operating hours: 9,600 h, functionality: fully functional, rotational speed (max.): 12,000 rpm, Sale of a steam turbine from a biomass power plant For sale is a steam turbine that has previously been used in a biomass power plant. The unit is in very good technical condition and is ideally suited for further use in energy or industrial projects. Dodpfezakb Djx Apheci The offer includes: Professional dismantling of the turbine Transport to the new location The turbine is intended for use in a short-term project only and is therefore available at attractive conditions. Further technical data and information are available upon request.

Condition: used, Year of construction: 2008, functionality: fully functional, LOOS International steam boiler / steam generator DF 1500 (06/2008), complete with Weishaupt oil/diesel burner. Capacity 1500 kg/h, PS 31 barg, PT 56 barg, TS 238°C, total volume 250 L, CE 0036. Supplied skid-mounted with control cabinet and instruments (as pictured). In stock, ready for loading. Sold to the first buyer who confirms with advance payment. Dodpfx Apjyg Rw Ejheci

Condition: used, Year of construction: 1991, machine/vehicle number: 40256654, pressure: 17 bar, power: 7,000 kW (9,517.34 HP), operating pressure: 17 bar, total height: 3,500 mm, total length: 9,000 mm, total width: 3,500 mm, type of input current: three-phase, Steam boiler in operation until 2025, 2 burners available: 1 burner for gas only and 1 dual-fuel burner that can switch between gas and fuel oil. Djdpoyrcz Tjfx Aphsci

Condition: ready for operation (used), functionality: fully functional, The Stériflow 1322 Barriquand autoclave is designed for industrial facilities requiring controlled thermal sterilization of packaged products. It enables precise processing cycles thanks to heating by superheated water or steam, ensuring uniform temperature increase. This results in consistent thermal treatment in compliance with food safety standards. Additionally, this method minimizes temperature discrepancies within the load. This autoclave is integrated into food processing lines for canned goods, ready meals, or packaged products. Its usable volume of 3,700 liters allows for processing large loads while maintaining precise process control. Furthermore, Barriquand’s industrial construction ensures robustness suitable for repeated operation, making the equipment well-suited to demanding production environments. The pressure vessel design allows operation up to 6 bar, ensuring thermal cycle stability. Sterilization parameters remain controlled throughout the process. The metal structure, engineered for pressurized circuits, adds to the installation’s reliability. As a result, the autoclave safeguards the sanitary quality of finished products. Dodpfxeygl Huj Aphoci Offered used by Europ’Equipement, the Stériflow 1322 autoclave is identified by its manufacturer’s plate and inspected before recommissioning. This ensures that the operator receives reliable, traceable equipment. Moreover, purchasing a refurbished autoclave reduces investment costs while providing a solution suitable for industrial requirements. Consequently, this model represents a cost-effective solution for optimizing production expenses without compromising process safety. Technical specifications: Year of manufacture: 1990 Serial number: S677 Heating medium: superheated water / steam Usable volume: 3,700 L Maximum operating pressure: 6 bar Circuit: B Empty weight: 2,400 kg

Condition: used, Year of construction: 1986, The Steriflow Barriquand 1351 Autoclave is an essential solution for sterilization and pasteurization in industrial environments. Thanks to its use of superheated water, it ensures maximum efficiency in preserving your food and pharmaceutical products. This model, dating from 1986, remains in excellent working order and continues to meet the high demands of modern production. What's more, this autoclave has six baskets, enabling it to handle large quantities. As a result, it is ideal for high-volume production requirements, while offering outstanding optimization of energy conservation. What's more, its Type B circuit guarantees reliable performance and consistent product processing. Dcjdpfxju Dimyj Aphei What's more, Steriflow, a renowned manufacturer of professional equipment, has designed this autoclave to offer not only exceptional durability, but also flexibility for a variety of processes. To find out how the Steriflow Barriquand 1351 Autoclave can improve your operations, visit our website. You'll find detailed information on its benefits and how it works.

Condition: ready for operation (used), functionality: fully functional, The Lagarde SVS100 autoclave is designed for industrial facilities requiring controlled thermal processing of packaged products. It ensures consistent and reproducible sterilization cycles, thereby contributing to the sanitary safety of production lines. As a result, processing remains controlled throughout the operation. Additionally, the Sterinov design meets the stringent requirements of food processing environments. This autoclave can be integrated into production lines dedicated to canned foods, ready meals, and packaged products. Its 400 V electric operation facilitates installation in standard industrial facilities. Furthermore, the robust construction of the equipment allows for repeated use under demanding production conditions, providing a reliable solution suited to industrial requirements. The SVS 100 is engineered with an architecture that guarantees stable thermal cycles, keeping operating parameters constant during processing phases. The simple electrical setup also makes maintenance and daily operation easier, supporting secure, uninterrupted production without unnecessarily complicating the process. Offered as a used unit by Europ’Équipement, the Lagarde Sterinov SVS 100 autoclave is identified by its manufacturer's data plate and undergoes inspection before being put back into service. This ensures users have a traceable, immediately operable unit. Acquiring a reconditioned autoclave also helps reduce capital investment while maintaining a tool suited to industrial sterilization requirements, making this model a cost-effective solution that ensures reliable thermal processing. Technical specifications: Model: SVS 100 Type: industrial sterilization autoclave Power supply: 400 V Dcjdpfx Ajyguaqjphei Frequency: 50 Hz Maximum operating current: 12 A Wiring diagram number: 6000.A Marking: Sterinov manufacturer's plate

Condition: good (used), Steam generator, evaporator Dcedpfewz Edqex Aphsi -Vaporizer: Manufacturer KED, Kurt Ehemann/Type electric vaporizer -Number: 5x evaporators available -Price: per piece -Total dimensions: Ø 330 x 575 mm -Weight: 35 kg/piece

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Steam Cylinder -Manufacturer: HygroMatik, steam cylinder for steam humidifiers/steam generators Dsdpfx Aepb Ea Ejphsci -Type: unfortunately without type designation -Accessories: including 6x electrics / 1x sensor electrics installed, see photos -Quantity: 2x containers available -Price per piece -Dimensions Ø 372 x 660 mm -Weight: 7.6 kg

Condition: used, Steam trap, ball float, steam trap ARI Cona, ball float steam waste -Manufacturer: ARI, float steam trap with flanges -Type: CNU R4 Dedpfjrtcfbex Aphjci -Connection: DN50 PN16 -Dimension: 275/230/H365 mm -Weight: 23.2 kg/pc.