Used Surface Treatment for sale (7,595)

Condition: ready for operation (used), ABA-WERK Aschaffenburg - Hand lever - FFK surface grinding machine -Magnetic clamping plate: approx. 300 × 150 mm -Working area: approx. 350 × 150 × 150 mm -Grinding length: approx. 350 mm -Grinding width: approx. 150 mm -Max. workpiece height: approx. 150 mm -Grinding wheel dimensions: approx. Ø 200 × 20 × 76 mm -Grinding spindle speed: approx. 2,800 rpm -Longitudinal table adjustment: manual -Transverse table adjustment: manual -Height adjustment: manual -Magnetic clamping plate: permanent magnet -Machine feet -Grinding wheel guard Hnodpfx Ajzr U Svsndju -Extraction system -Work light -Documentation Dimensions: L x W x H 1.1 x 1.1 x 1.7 meters / Weight 800 kg Errors and omissions excepted.

Condition: good (used), Complete set consisting of: 1 unit of SAV grinding vise, jaw width 65 mm 1 unit of SAV grinding vise, jaw width 80 mm 1 unit of grinding vise, jaw width 60 mm 1 unit of sine vise, jaw width 70 mm 1 unit of universal vise, jaw width 70 mm 9 units of grinding magnets 1 unit of grinding wheel dressing tool, manufacturer Jung 1 unit of sine grinding wheel dressing tool, manufacturer Jung Hnjdpfx Aozr U U Rjndeu in good condition

Condition: used, Year of construction: 2001, serial number 208892 Hnsdezf Nu Ejpfx Andsu control Siemens 611 weight 6,3 t

Condition: excellent (used), Year of construction: 1994, total length: 2,950 mm, total width: 2,100 mm, feed length X-axis: 650 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, workpiece weight (max.): 400 kg, feed rate X-axis: 5,000 m/min, feed rate Z-axis: 5,000 m/min, grinding wheel diameter: 350 mm, table length: 600 mm, table width: 400 mm, Digital read out system position slides 5 stones and flanches Coolant and Filtration system CE Mark Levelling pads included  Full set off books  X - Travel: 650mm Hsdpfsyvhxmjx Andjnu Y - Travel: 400mm Z - Travel: 400mm Table Length: 600mm Table Width: 400mm Table load: 400 Feed rate X-Axis: 0-5000mm/min. Feed rate Z-Axis: 0-5000mm/min. Grinding stone dimensions:350 x 127 x 50mm Power: 6kW Speeds: 1400Rpm Cooling system: Yes Feed rate Y-Axis: 0-5000mm/min. Length: 2950mm Width: 2100mm Height: 2000mm Weight: 2550kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1987, functionality: fully functional, total width: 1,500 mm, total length: 1,000 mm, overall weight: 855 kg, WAG 894- Offered here is a Novalith hard stone surface plate. Surface plate dimensions: 1500 mm x 1000 mm x 190 mm. Year of manufacture: 1987. Weight: approx. 855 kg. Flatness (specified): 20 μm. Flatness (actual): 50 μm. Hnedjy Auuhspfx Andou

Condition: used, Year of construction: 2021, functionality: fully functional, grinding length: 6,000 mm, grinding width: 800 mm, total height: 800 mm, Technical specifications: • Application: Surface grinding and profile grinding • Grinding area: 6000 x 800 x 800 mm • Grinding wheel: 500 x 100 x 203.20 mm • Spindle power: 43 kW • Connected load: 89 kW • Operating hours: approx. 4,400 machine operating hours / approx. 1,600 spindle operating hours • Year of manufacture: 2021 Hjdpfxozcyccs Andjnu The machine is currently fully functional and can be inspected at the supplier’s premises by appointment. Price is quoted ex works in Lower Saxony; the machine will be prepared/packaged for transport. The machine can be taken over immediately. Equipment: • CAM profile grinding software “WinWop” • Diamond roll dressing unit with 160 mm diamond wheel • Coolant recirculation system • Grinding mist extraction system • Automatic balancing • Spark detection system • Belt filter system with magnetic separator • VPN connection for remote diagnostics/remote maintenance

Condition: good (used), Roughness measuring device, HOMMEL / Jenoptik, type Waveline 20 (Tester T1000), in fully functional condition. Hnjdpfozcy N Ajx Andsu Plate size: 400 x 280 mm Column height: 400 mm Plate width: 280 mm Plate length: 400 mm Adjustment range, max.: 300 mm

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, TECHNICAL SPECIFICATIONS, MODEL RTR 600 CN Table diameter mm: 600 Electromagnetic chuck diameter mm: 600 Cross travel mm: 350 Max. grinding height with new grinding wheel mm: 400 Table speed, continuously adjustable rpm: 1-200 Gripping wheel dimensions mm: 400 x 50 x 127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power kW: 15 Max. load on table kg: 1,000 Net weight approx. kg: 5,200 Vertical movement is achieved on linear slides and is driven by a precision ball screw and a YASKAWA AC motor. Vertical axis resolution: 0.001 mm. Measuring system = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Transverse movement is performed on linear slides and is controlled by a precision ball screw and a YASKAWA AC motor. Transverse movement is performed by the grinding wheel head mounted on the cross slide. Transverse axis resolution = encoder Dimension read on display. Display resolution = 0.001 mm. Electronic handwheel for manual movement. Rotary table with hydrostatic circular slides. Infinitely variable rotation speed, with YASKAWA AC drive motor. Balanced hardened steel spindle with 15 kW motor. Fixed speed. Option: YASKAWA frequency converter for continuously variable spindle speed (1,100–1,900 rpm) Lubrication unit with automatic lubrication cycle, external to the machine, without initial filling. Standard accessories: - LODI CNC type T 2000 (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, flash grinding - Digital measurement of the vertical and transverse axes. Resolution = 0.001 mm - Electronic handwheel for manual axis movement - Continuously variable table speed via YASKAWA AC motor. Rotary table with hydrostatic slides - Grinding wheel headstock with 15 kW motor. Fixed spindle speed: 1,450 rpm. Hnedpfx Aox N I Alsndeu - Central lubrication for all moving parts - Hydraulic unit located outside the machine - Complete watering system with piping, electric pump, guards, electrical equipment, and a 250-liter settling tank (without filter) - Complete enclosure of the work area with sliding door (open ceiling) - 1 complete flange with grinding wheel - Work light - 1 set of service wrenches - CE Declaration of Conformity + CE plate - Operating voltage 400 V +/- 5%, 50 Hz - Electro-permanent magnetic plate with electronic device for adjusting the attraction force. WAGNER brand, type EP 360 - Ø 600mm - YASKAWA frequency converter for continuous adjustment of the grinding wheel speed (1,100-1,900 rpm) and for braking at the end of the cycle - LOSMA paper filter, type DTE 100 (capacity 300 liters) - LOSMA wet fume extractor, type AS1 (capacity 1,300 m³/h) - "MARPOSS" dynamic grinding wheel balancing device for dynamic and automatic balancing of the rotating grinding wheel - Linear diamond holder mounted on the grinding wheel headstock. Automatic dressing cycle with automatic grinding wheel wear compensation. Diamond increment by AC motor. Resolution 0.001 mm - 1 Diamond - Complete auxiliary pump for washing parts and the magnetic platen

Condition: refurbished (used), Year of construction: 2009, TECHNICAL SPECIFICATIONS, MODEL T 60.35 CN Rawable length mm: 600 Rawable width with grinding wheel width mm: 390 Rawable height with new grinding wheel (on magnetic chuck) mm: 400 Magnetic chuck surface mm: 600x300 Longitudinal travel mm: 750 Transverse travel of the carriage under the table mm: 350 Adjustable table speed m/min: 1-30 Gripping wheel dimensions mm: 400x40x127 Gripping wheel rotation speed, fixed rpm: 1,450 Automatic feed on the vertical axis, min. mm: 0.001 Spindle motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Net machine weight: 3,000 kg - Vertical movement of the grinding wheel headstock The vertical movement is performed on linear needle slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Vertical axis resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Hnedsx N I Arspfx Andeu Dimension readout on the display. Display resolution: 0.001 mm. Electronic handwheel for manual movement. - Transverse movement The transverse movement is performed on hydrostatic slides and is controlled by a precision ball screw and a YASKAWA brushless motor. Dimension readout on the display. Display resolution: 0.001 mm. Optical scale with 0.001 mm resolution. Electronic handwheel for manual movement. - Longitudinal table movement Two hydraulic cylinders and a hydraulic unit located outside the machine control the table movement. Rotation speed is continuously adjustable from 1 to 30 m/min. - Lubrication Located outside the machine, this system controls the table movement and the lubrication of all moving parts. ACCESSORIES - LODI CNC type T 2020W with 12.1" graphic display (see photo) - Automatic work cycle with different values ​​for the various cycle phases: roughing, finishing, and polishing - Visualization to the thousandth of a millimeter of vertical and transverse axis movements - Electronic handwheel for manual axis movement - Coolant system with paper filter and high-pressure pump - Mist extractor (capacity 2,400 m³/h) - Electro-permanent magnetic plate, dimensions 600 x 300 mm - Hydraulic dressing device above the head with CNC-programmable automatic dressing operation and automatic grinding wheel wear compensation. - YASKAWA frequency converter for continuous adjustment of grinding wheel speed and for accelerating braking at rest. - Grinding wheel flange with balancing shaft - Complete work area enclosure - Work light

Condition: refurbished (used), TECHNICAL SPECIFICATIONS Rotary table diameter: 600 mm Magnetic plate diameter: 600 mm Segment holder (or diamond grinding wheel) diameter: 430 mm Maximum grinding height: 400 mm Table rotation speed, continuously adjustable: 1-20 rpm Vertical automatic increments: 0.001 mm Spindle motor power: 37 kW Grinding spindle speed, continuously adjustable: 500-1000 rpm Maximum load on table: 900 kg Net machine weight: approx. 7500 kg Power supply: 400 V +/- 5% 3 Phases, 50 Hz Control circuit voltage = 24 V DC TECHNICAL DESCRIPTION • Frame and uprights made of electro-welded, thermally stabilized steel, with high rigidity and reinforcing ribs. Vertical movement of the spindle head • Precision linear slides • Vertical movements of the grinding wheel head via high-precision ball screws + YASKAWA brushless shaft motor • Vertical movements of the grinding wheel head via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel head, 0.001 mm resolution Transverse movement of the rotary table • Precision linear slides • Transverse movement of the rotary table via high-precision ball screws + YASKAWA brushless shaft motor. Hjdpfx Aox N I A Sjndjnu • Transverse table movements via electronic handwheel. • Minimum programmable value = 0.001 mm. • Display showing the vertical position of the grinding wheel headstock, 0.001 mm resolution. Spindle Motor • Coaxial spindle with drive motor • Balanced 37 kW spindle motor, without drive belt or coupling. • Frequency converter for continuously variable spindle speed and rapid braking of the spindle motor at the end of the cycle. Rotary Table • Cast iron rotary table with hydrostatic slides. • Drive via Siemens brushless motor • Continuously adjustable table speed from 1 to 20 rpm STANDARD EQUIPMENT • Electropermanent magnetic chuck, 600 mm diameter with parallel poles, complete with electronic control and attraction force adjustment • Electronic handwheel for manual movement of the vertical and transverse axes. • LODI CNC Type T 2000 • Encoder-based measuring system for the vertical and transverse axes. Resolution = 0.001 mm • Automatic cycle with different feed rates for the various cycle phases: roughing, finishing, and sparking. • Cast iron rotary table with hydrostatic slides • Rotary table speed continuously adjustable by brushless motor • Frequency converter for continuous spindle speed adjustment and rapid spindle motor braking. • Coolant system with external collection tray. • External lubrication unit for automatic lubrication of all moving parts. • Complete segment holder (flange) with a set of segments + grinding wheel holder for diamond grinding wheel • Complete work area enclosure with sliding door • Work lights • Set of service wrenches • Documentation in French (1x printed, 1x on DVD) • CE Certificate Lubrication • External lubrication system for lubricating all moving parts. Watering System • Watering system including protective plates and hoses, including a settling tank outside the machine (without filter) Enclosure • Full enclosure with manually operated sliding door CNC Control LODI T2000 type CNC for managing and controlling the machine's axis movements. Automatic work cycle for grinding parts.

Condition: used, AD planer Minimax 400, very good condition, 410 mm table width, 4 knives, 2600 mm table length Price changes reserved, errors, misprints and typographical mistakes excepted. Hjdpfswzzdyox Andenu

Condition: used, Year of construction: 2013, grinding length 800 mm grinding width 400 mm workpiece height 375 mm Control Siemens 840 D total power requirement 18 kW weight of the machine ca. 2,6 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : GEIBEL & HOTZ CNC horizontal surface & profile grinding machine model FS 840 KT CNC year 2013 Serial no 38040513 _____ Grinding length max. (table movement 850mm) 800 mm Grinding width max. (cross movement 400mm) 450 mm Mounting height under new grinding wheel 375 mm Distance table – center of spindle min / max 140 – 525 mm Standard size of magnetic plate 800 x 400 mm Max. table load 700 kg Table speed 5 – 35.000 mm/min Cross-/Vertical quick feed 5 – 4.000 mm/min Grinding wheel measurements 300 x 50 x 76,2 mm (350 x 100 x 76,2) Cutting spped max. 45 m/s Grinding spindle-drive approx. 9 kW Total electrical load approx. 18 kW - 400 V - 50 cycles Weight approx. 2.600 kg Accessories / Special Features: • Machine is equipped with a simple to use but freely programmable SIEMENS CNC control model 840 D SolutionLine with additional GEIBEL&HOTZ grinding software. User friendly interface, supported by dialog and graphics, simple programming, also of complex grinding wheel profiling and easy connecting of all the usual grinding cycles. • electronic handwheel for 3 axis. • Table movement is actuated by ball screw drive (KT), which allows both very high and very low table speeds and is also ideal for profile grinding. • Cross feed (Z) and infeed (Y) effected by ball screw drive with incremental glass scale. • Diamond dressing device mounted on the left side of the table (also for profile dressing); additional driven diamond roller dressing device (table-mountable) with automatic dressing cycle, including compensation. • HOFMANN balancing device EasyBalancer EB3100 (with installed rpm & vibration sensor) • Unfortunately currently only a small magnet 110 x 200 mm available. • Separate band filter coolant filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors, separate switch cabinet, lamp for working area, various accessories, manuals, etc. Condition : very good, universal machine for all sorts of grinding tasks ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading Hsdpfewd Tx Iox Andjnu We always have a large selection of surface grinders – CNC or conventional - available. Please let us know your requirements.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 119920 € 2266.49 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 0 - 20 m/min 0 - 3000 mm/min 0,001 mm 350 mm 440 mm 0 - 3000 mm/min 0.001 mm 500 - 1800 1/min 11 kW 3160 mm 2450 mm 2080 mm 3400 x 2200 x 2530 mm 4000 kg 975 mm 195 kg 370 kg 355 x 50 x 127 mm 1,1 / 1,1 kW 3.9 kW 0,005 mm 0,003 mm Smart i control with 10.4" touchscreen on a swiveling panel, with electronic wired handwheel, with graphical dialog programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with heavy duty needle roller bearing for low friction, better accuracy and lower maintenance costs All 3 axix with precision ball screws (class C2) and AC servo motors Fully enclosed splash guard with lamp Electromagnetic chuck plate Coolant system 120 lt with automatic paper filter and magnetic separator Automatic diamond roller dresser mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing scale Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Hsdpfswirb Sjx Andjnu Accuracy standard ISO 1986-1 * The exact configuration of the dresser must be clarified before ordering

Condition: new, neu 050233 Jänner 2027, Zwischenverk Taiwan 87870 € 1660.74 € 1015 mm 600 mm 1000 x 400 mm 1000 x 400 mm 670 kg 1100 mm Hsdpjwircijfx Andonu 5 - 25 m/min 0 - 2.250 mm/min mm 450 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 1.5 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4400 x 2300 x 2400 mm 4800 kg 423 kg 670 kg 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of working area 1 grinding wheel 2 grinding wheel flanges grinding wheel balancing stand balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 74030 € 1399.17 € 610 mm 600 mm 600 x 300 mm 600 x 300 mm 420 kg 700 mm 5 - 25 m/min 0 - 2.250 mm/min mm 350 mm 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2000 1/min 5,5 kW 0.75 kW 1.1 kW 1.1 kW 2710 mm 2428 mm 2200 mm 3500 kg 975 mm 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment table mounted with compensation * fully enclosed splash guard protection of working area grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor Hnedpjwirc Nofx Andsu LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH autom. dressing attachment table mounted with compensation *

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 50290 € 950.48 € 610 mm 600 mm 610 x 305 mm 300 x 600 mm 650 mm 700 mm 5 - 25 m/min 1.100 mm/min 1 - 12 mm 370 mm 1.5 kW 0.004 kW 0.19 kW 7,4 kW 2670 mm 1810 mm 2050 mm 2100 kg 355 x 50 x 127 mm 1.450 U/min 3,7 kW Hsdpfewirh Sox Andonu 4 mm 0,02 mm 0,2 mm 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator manual extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 22110 € 424.51 € 457 mm 460 x 146 mm 450 x 150 mm 482 mm 180 mm 1900 mm 1400 mm 2130 mm 680 kg 208 x 12,7 x 31,75 mm 1,5 kW Hnodjwirn Eepfx Andeu 3 mm 0,01 mm manual vertical feed manual longitudinal and cross movement of the table grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck150x450 mm coolant equiptment with filter manual dresser with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

Condition: refurbished (used), grinding length: 600 mm, grinding width: 200 mm, grinding length 600 mm grinding width 200 mm electromagnetic chuck 450×175 mm X-travel 660 mm Z-travel 225 mm grinding wheel size 250x25x51 mm Control Jung TouchScreen Hnedpfxsxal Hyo Andju weight approx. 3000 kg

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 196520 € 3714.23 € 2000 mm 730 mm 2000 x 600 mm 2x 1000 x 600 mm 2100 mm 5 - 30 m/min 0 - 2250 mm/min mm 685 mm 0 - 675 mm/min 0.001 - 0.04 mm 560 mm 500 - 2200 1/min 11 kW 5.5 kW 6225 mm 07 mm 2305 mm 6530 × 00 ×3350 (brutto mm 10200 kg 1600 kg 1150 kg 1600 kg Dm. 405 x 75 x 127 mm je 3,1 kW 10.4" graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Hodpfsxpizmox Andjnu Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list Max. table speed 30 m/min Integrated machine body temperature control Turbide-coated double V-guides Hydraulic table drive with cooling Linear guides with recirculating ball screws and AC motors for precise positioning in the X and Z axes Automatic lubrication with a pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 2x 1000 x 600 mm Coolant system with automatic paper filter and magnetic separator (500 l) Automatic dressing device mounted on the table, without diamond, with automatic compensation Grinding wheel flange with 1 grinding wheel Grinding wheel balancing stand LED machine light Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH OPTIONS (PRICES ON REQUEST): Complete enclosure of the work area Oil mist extraction

Condition: used, Year of construction: 1954, x-travel 600 mm Hnsdpevu Hl Defx Andju ja

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. Hsdpfx Anevi H Nfedjnu - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Model - CR1100D Max. Width of planing - 1100 mml Min. Thickness of planing - 8 mm Max. Thickness of planing - 150 mm Min. Length of planing - 435 mm Bottom spindle speed - 4500 RPM Electric power - 75 kW Feed drive motor - 5 HP Pressure roller elevation motor - 2 HP| Dust hood outlet dimensions - O125 mm x 1, 200 mm x 4 Cutter-head diameter - 150 mm Air pressure - 4~6 kg/cm Table height from floor - 990mm Machine dimensions (L x W x H) - 2800x2150x2000 Net weight (Approx) - 4600 kgs Hedswf Hbrjpfx Andjnu Gross weight (Approx) - 4950 kgs

Condition: good (used), grinding length 600 mm grinding width 200 mm max. dia. of grinding wheel 220 mm magnetic clamping plate 500 x 200 mm total power requirement 4,2 kW dimensions of the machine ca. 2 x 1,3 x 1,8 m Hnodpfx Aoxb Eg Aondsu

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially Hnodpfxot Hwzij Andsu reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Payment : net– after completion of contract

Condition: good (used), Surface grinder, grinding machine, horizontal surface grinder, surface grinder, magnetic grinder -Manufacturer: aba Abawerk, surface grinding machine-horizontal type FFK with magnetic plate Hnsdpfx Aneikgdmsdou -Magnetic plate: 360 x 122 mm -Traverse paths: x 390 mm / y 170 mm / z 260 mm -Drive: 2.0 kW -Grinding wheel: Ø170 mm, max. 245 mm -Coolant device -Transport dimensions: 1120/1100/H1630 mm -Total weight: 604 kg