Used Swivel Magnet for sale (6,017)

Condition: excellent (used), Sinus magnetic clamping plate, 380x150 mm, sine table/angle table Manufacturer: Binder Magnete Fgsdpfxozhrffe Aansi Type: 0011817C1 In very good condition.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction Fjdpezfi A Ajfx Aansgi In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: like new (used), Like-new tilting and swiveling rotary table Fgedpfoy Ul D Rex Aanji Length: 800 mm Width: 300 mm

Year of construction: 2024, condition: new, functionality: fully functional, Description of Use: Fgjdpfx Aeh D H Rceansi Overband Magnetic Separator (MAGNETIC series) is applied to loose materials to automatic removal of ferrous impurities in the process of waste recycling. Apart from metal recovery the Separator has a protective function for equipment in further steps of recycling process. They are usually installed on top of transport conveyors. Belt separators are used in many fields: -scrap removal from coal and aggregate -wood and plastic purification -iron particles recovery from cable shredding -iron rejection from WEEE recycling process -municipal waste purification Contact us for more information

Year of construction: 2022, condition: new, machine/vehicle number: 2022022209, Aluminum angled conveyor belt with substructure Conveyor length: 1500mm flat + 4000mm rising Pitch angle in bend 45°C Fgsdpsh Elhzsfx Aanji Discharge height: approx. 3000mm Height of the horizontal top edge 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 400mm T30 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+180-5+35+70 Full-surface underlay sheet Drive: Motor approx. 0.25KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54 Incl. construction for hanging the overbelt magnetic separator in the horizontal.

Year of construction: 2019, condition: excellent (used), Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overband plate magnet Fgedpfx Aehuphvsanoi Execution in VA 1.4301 tightly welded SrFe strontium ferrite magnetic core, deep magnetic field! Dimensions: 620x520x200mm 4 - piece M16 eyebolts on the back This lifting magnet was used by one of our customers as a "police magnet" in the meat processing industry. The price mentioned refers to 1 piece. Currently only 1 piece available from stock! All information without guarantee, only while stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Overband plate magnet Execution in VA 1.4301 tightly welded 420x420x200mm 420x420x250mm 620x420x200mm 620x520x200mm 820x520x200mm 820x520x250mm Completely welded stainless steel housing to protect the magnetic core Ring eyelets for hanging Cleaning drawer for easy removal of accumulated impurities. Installation above all conveyor systems possible...

Condition: new, Attachment suited for: Hoisting equipment Selling price: € 1.000, US$ 1.056 Fgedpfx Aaspa Rtusnji Price is representative. For detailed information, please contact us.

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45° Height and swivel adjustment via handwheel Dial indicators in the handwheel Motor power 7.0 kW 4 speeds 30mm milling spindle Aluminum clamping jaws Milling fence with crank adjustment Fodpfx Aeipv A Tsanjgi Long cast iron tables Safety rulers

Condition: ready for operation (used), Siemens 1FT5046-1AF71-3EA0 permanent magnet motor SN EF186446105001 + HE-65-M rotary encoder, used, minor signs of wear, 100% functional, scope of delivery as per photos Fjdel Syhgepfx Aanjgi

Condition: ready for operation (used), Siemens 1FT5072-0AC01-2-Z permanent magnet motor Z = G51 / H40 SN: E0T98376302008 + Hohner TX.351247 10I0 rotary encoder SN: H33K50, used, normal signs of use, 100% functional, scope of delivery as per photos Fjdjmah Dlepfx Aanegi

Condition: ready for operation (used), Siemens 1FT5064-0AF01-Z Permanent Magnet Motor, serial number 5G85 9952 07 002, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Fgsdpfx Ajk Uy U Eoansi

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA500x600mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: L: 800mm B: 800mm Fgedpfx Aaedzqw Aenoi H: 820mm Inlet: 600x250mm Drum: Ø 500x600mm

Year of construction: 2020, condition: new, Dimensions: 250x250x80mm Filter systems are used for the thorough separation of finest ferrous metal contaminants. Examination of shoe goods Universally applicable in pipe systems, funnels & slides Easy handling and cleaning Permanent magnetic filter grids can be manufactured in round, rectangular or square design. Fodjdzqw Iopfx Aanogi Ferrous particles are reliably filtered out of the ware as they pass through the grates. In addition, this design provides easy cleaning of the stave. The filter system can be removed from the jacket with a handle. The maximum operating temperature is 80 ° C.

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Dimensions: Fgsdpfxjdzqxbe Aanoi L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Fgjdpfx Ajd Dy Ugoansi Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: ready for operation (used), Plate size: 170 x 480 mm Plate height: 95 mm Variable pole spacing: 12.5/25 mm Electrical connection: DC 110 V Fgodped Ef S Ejfx Aanoi

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded 800 x 500 x 180mm completely welded housing Fgedpjd Evl Dofx Aanoi Ring eyelets for suspension

Condition: used, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Speed = n. max.: 2000 rpm Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Fjdeuch N Ispfx Aanegi Weight: 23 kg good condition

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Fjdpfx Aeu R Szaoanjgi Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: new, Year of construction: 2026, Tilting Swivel Machine Vice 125 mm QHK125 – Precise Angular Workpiece Clamping Machine vices are a key component of any machining workstation where workpiece stability and accurate positioning are essential. The QHK125 model features a unique tilting and swivelling cradle design, making it highly functional for angled machining operations. Ideal as a vice for bench drills, milling machines, and grinders, especially for applications requiring unusual workpiece positioning. Its robust cast iron construction combined with swivel and tilt capabilities ensures flexibility, precision, and safe operation. Main advantages of the QHK125 machine vice Tilting and swivelling cradle design – allows simultaneous angular positioning in two planes. Precision 360° graduated scale – enables accurate workpiece positioning in 1° increments. Solid cast iron construction – provides stability, rigidity, and long service life. High clamping force of 3000 kg – ensures secure holding of workpieces during heavy-duty and precision machining. Protected lead screw – shields the mechanism from chips and coolant, extending service life. Removable swivel base – allows the vice configuration to be adapted to specific machining requirements. Design and technology The QHK125 is an industrial-grade swivel machine vice designed for precise and safe angled machining operations. The body and movable jaw are manufactured from high-quality cast iron, providing excellent resistance to twisting forces and vibrations. The tilting mechanism, based on a cradle construction, ensures stable maintenance of the selected angle. The lead screw is protected by a cover, preventing contamination and wear, which helps maintain smooth operation over a long service period. Precision and work efficiency The tilting cradle vice allows the workpiece to be rotated and inclined in multiple planes without removing it or changing the vice position on the machine table. This design significantly reduces setup time and enables complex machining operations without the need for additional fixtures. The rigid and stable construction ensures high accuracy even during demanding milling and grinding operations. Applications The QHK125 vice is suitable wherever precise angular positioning of the workpiece is required. It is recommended for: Conventional and CNC milling machines – for angular and face machining operations. Grinding machines – allowing accurate positioning of surfaces at the required angle. Fedpfevxgh Tex Aanjgi Bench drills – ideal for drilling inclined holes. Toolrooms and single-piece production environments – offering high versatility for precision tasks. Standard equipment Tilting cradle machine vice with body and movable jaw Swivel base with 360° graduated scale Tilting cradle mechanism Covered lead screw Technical specifications – Tilting Swivel Machine Vice 125 mm Parameter Value Jaw width (S) 125 mm Maximum jaw opening (am) 125 mm Jaw height (h) 50 mm Base width (A) 244 mm Mounting hole diameter (D) 18 mm Total height (H) 195 mm Total length (L) 420 mm Clamping force 3000 kg Weight 33 kg

Condition: new, Year of construction: 2026, Rotary machine vice QH200 200 mm – precise clamping for professional applications Machine vices are essential equipment for any machining workstation where accuracy, stability, and durability are required. The QH200 rotary machine vice, with a 200 mm jaw width, is a robust and versatile solution designed for use with milling machines, drill presses, grinders, and shaping machines. Thanks to its 360° swivel base with 1° graduation, the operator has full control over workpiece positioning relative to the cutting tool, significantly improving machining precision and working comfort. Main advantages of the QH200 machine vice Rigid cast iron construction – provides excellent resistance to deformation and effectively dampens vibrations. 360° swivel base – with 1° graduation, enabling fast and precise angle adjustment. High clamping force of 3500 kg – ensures secure workpiece holding even during heavy-duty machining. Protected lead screw mechanism – shielded against chips and contaminants, increasing durability and reliability. Removable swivel base – allows use as either a fixed or rotary machine vice. Construction and technology The QH200 machine vice is manufactured from high-quality cast iron components. The body and movable jaw design provide excellent rigidity and resistance to overloads. The lead screw mechanism is enclosed and protected against metal chips and coolant, ensuring long-term protection of precision working surfaces. Carefully developed geometry and accurately machined contact surfaces guarantee reliable and precise clamping in accordance with industrial requirements. Precision and work efficiency The precise rotary mechanism allows quick adjustment of the clamping angle without repositioning the entire machine. This feature significantly reduces setup time and improves efficiency during both single-piece and serial production. The high clamping force enables safe machining of even hard materials without the risk of workpiece movement. Applications The QH200 rotary machine vice is designed for professional use in: Fodpfxevxgi Ds Aansgi industrial machining plants, tool rooms, metalworking workshops. It is ideal as: Drill press vice – for accurate and repetitive drilling operations. Milling machine vice – for stable clamping during side and face milling. Grinding machine vice – for machining flat and angled surfaces. Universal workshop vice – for production and maintenance applications. Standard equipment Vice body and movable jaw made of high-quality cast iron Angular scale from 0–360° with 1° increments Removable swivel base Protected lead screw mechanism Optional equipment Soft and hard jaw inserts for non-standard workpieces Mounting elements adapted to specific machine types Technical specifications – QH200 machine vice Parameter Value Jaw width (S) 200 mm Maximum opening (am) 160 mm Jaw height (h) 63 mm Body height (H1) 140 mm Total height (H) 178 mm Base width (A) 240 mm Overall length (L) 480 mm Length without base (L1) 445 mm Mounting hole diameter (D) 18 mm Clamping force 3500 kg Weight 41 kg

Year of construction: 2016, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2016. The Miltenyi Biotec CliniMacs Plus Instrument P/N 44085 is a cell separation system designed for clinical-scale enrichment of target cells or depletion of unwanted cells from blood products. It automates cell separation in a sterile system, enabling the separation of target cells from unwanted cells and collecting the fractions in different bags. The system is widely applicable in regenerative medicine, adoptive immunotherapy, and graft engineering. It magnetically labels cells in the Cell Preparation Bag and separates them, providing high purity and excellent yield. With optimized protocols, the system combines reproducibility with ease of use. Specifications: Dimensions: 70cm x 60cm x 90cm (w x d x h) Weight: Approximately 35 kg Fjdst E Hl Ijpfx Aansgi Input Voltage: 100-240 V~ Power Consumption: 350 W Monitor: 10.1 TFT Touchscreen Types of Starting Material: Leukapheresis, bone marrow Processing Steps: Cell depletion and enrichment via magnetic cell separation Good working condition. Please check out our other listings as well.

Condition: used, Max. bending length: 1020 mm Fsdpfx Aaeyyl Nkonjgi Max. sheet thickness: 3.5 mm steel Polished bending rail Weight: approx. 1000 kg

Condition: used, Year of construction: 2012, functionality: fully functional, overall weight: 2,600 kg, type of input current: AC, input voltage: 400 V, 4 x Wagner Permanent Magnet Separators – various models A total of 4 used permanent magnet separators from the manufacturer Wagner Magnete are for sale. The magnetic separators were used in our recycling and processing plant and serve to automatically separate ferromagnetic components from different material flows. Due to the restructuring and upcoming reconstruction of our recycling plant, the four magnetic separators are being offered for sale. Technical data of the 4 magnetic separators: Magnet 1: - Manufacturer: Wagner Magnete - Type: 0452-115/130-250 G2 - Equipment number: 546235 - Weight: approx. 2,600 kg - Motor power: 3 kW Magnet 2: - Manufacturer: Wagner Magnete - Type: 0452-115/170-250 G2 - Equipment number: 546236 - Weight: approx. 3,340 kg - Motor power: 3 kW Magnet 3: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546237 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Magnet 4: - Manufacturer: Wagner Magnete - Type: 0452-95/130-250 G2 - Equipment number: 546986 - Weight: approx. 2,200 kg - Motor power: 2.2 kW Further technical specifications (all 4 magnetic separators): - Belt speed: 1.5 m/s - Motor manufacturer: SEW - Operating voltage: 400 V - Current type: Three-phase (AC) Fgedpez R Sw Hefx Aansi - Frequency: 50 Hz - Protection class: IP55 Condition and sale: All four magnetic separators are in used condition and show corresponding signs of wear and tear due to operation. The magnetic separators can be purchased individually or as a complete package. An on-site inspection is possible after prior appointment. Technical documentation is available. Price upon request. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Fgsdpfx Aaoz Akgwsnei Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.