Used Tensioning Washer for sale (3,218)

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Laodpot Ul Exefx Al Nsc

Condition: used, Year of construction: 1997, Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction Ledpfx Aexrg H Sol Njac

Condition: used, Year of construction: 2013, Overview The bottle washer was manufactured by the German company Krones in 2013 and put into operation in 2014. It has been serviced annually. In addition, tenside lye cleaning and spare parts can still be purchased. DISMANTLING INCLUDED. Technical data  Capacity: 66,000 bph Maximum bottle diameter 69 mm Set up for the following formats:  Vichy 0,33l Long-Neck 0,33l Long-Neck 0,5l NRW 0,5l  Steinie 0,33l Lsdpfjl Hx Ensx Al Noac

Condition: used, Year of construction: 2000, Overview  The crate washer was manufactured in 2000 by the German company Bohrer. It is located at a German brewery and was part of a plant that has been shut down as it was replaced by a completely new line. In autumn 2024 the line was stopped and the machine was dismantled and stored.  Technical Details  Capacity: up to 2,000 crates/hour (can be adjusted from 500 - 2,500 crates/hour) Formats: crate of 12 bottles 700ml 356 x 275 x 346 travel direction crosswise crate of 20 bottles 250ml 360 x 275 x 255 travel direction crosswise crate of 20 bottles 500ml 400 x 300 x 290 travel direction crosswise crate of 20 bottles 500ml 400 x 333 x 260 travel direction crosswise Horizontal and vertical spray nozzles Spraying with hot caustic and fresh water Caustic heater with temperature regulation is integrated in the machine Machine is heated by steam Dimensions: Length: 4800mm Width: 900mm Height: 1400mm Weight: 1800kg Sieves for removal of dirt Incl. documentation Incl. spare parts list Incl. Electrical diagram Lsdpfx Aevm D Umel Nsac

Condition: used, Year of construction: 2020, Overview  This semi-automatic keg washer was manufactured in 2020 by Italian company SIFA. The Idrokeg 21 is equipped with two cleaning heads and designed for efficient steam-heated keg washing. With a capacity of up to 12 kegs per hour, it is suitable for small to medium-sized breweries. The unit is in very good condition, ready for immediate use, and comes with dedicated tanks, pumps, and cleaning features. Technical data  Capacity: 12 kegs/hour Cleaning stations: 2 Heating: Steam Formats: S-type kegs Laodpfx Aljxcul De Noc

Year of construction: 2021, condition: new, functionality: fully functional, 320x = 1 pallet € 1,900 Laodpfx Alstzwyns Noc Brand: NN Year of manufacture: 2021, new/unused Dimensions LxWxH (mm): 10,000 length (4,000 kg) Quantity in stock: 320

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatically operated hot water parts washing machine with basket drive via gear motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. - Basket diameter: 910 mm - Usable height: 520 mm - Max. loading weight: 200 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Empty weight: approx. 300 kg Wash cycle timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Tank cover with fine filter (2,000 microns) 2 suction filters as pump protection Steam extraction system incl. condensate return Lasdjhymmgjpfx Al Nsc This is an exhibition machine from the Glogar Technology Center.

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatic hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 200 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (ambient temperature - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Empty weight: approx. 300 kg Wash cycle timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Laedpfx Alec S Tlae Nsc 2 suction filters as pump protection Operating hour counter Steam extraction with condensate return Oil skimmer for bath maintenance Insulation of the complete system Parts washing machine is in new condition (test system / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L90 Automatically operating hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 790 mm - Usable height: 500 mm - Max. load weight: 150 kg - Spray pressure: 3 bar - Tank volume: 105 liters - Heating: electrically adjustable (ambient temperature - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash cycle timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and exterior cladding) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the entire system (tank and cabin) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Oil skimmer for bath maintenance Operating hour counter Steam extraction with condensate return Lsdpfsd H Slaex Al Nsac Parts washing machine is in new condition (test facility / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: used, Eillert flume washer, Lasdetp Rr Ropfx Al Noc More information soon. Have a look at the photo's and video's

Condition: used, Tennant 5680 Walk-Behind Floor Scrubber – Key Specifications a Tennant 5680 battery-powered walk-behind floor scrubber, ideal for commercial and industrial cleaning applications. This model is known for its durability, reliability and excellent cleaning performance — perfect for warehouses, manufacturing floors, supermarkets, healthcare facilities and contract cleaning operations. - Model: Tennant 5680 (battery-powered walk-behind scrubber) - Solution tank: 30 gallons / 114 L - Recovery tank: 40 gallons / 151 L - Brush motors: (2) 0.75 hp (0.5 kW) - Brush speeds: - • Disc: 200 rpm - • Cylindrical: 750 rpm Ledpfx Alex Szwbs Nsac - Vacuum motor: 0.8 hp, 3-stage - Battery system: 36 V (Standard ≈ 240 Ah) - Machine weight (with batteries): ~805 lb / 365 kg - Noise level: ~75 dBA - Estimated cleaning coverage: up to ~30,600 ft²/h (≈ 2,845 m²/h) depending on path & technology used Condition - Machine is in excellent working condition - Fully tested and ready for immediate use - Batteries and scrub heads in operational condition (specify if new/serviced if applicable) Contact us for pricing, additional pictures, video demonstration, or to schedule a viewing. Worldwide delivery available. keywords: Tennant 5680 floor scrubber, walk-behind scrubber, battery floor scrubber, industrial floor cleaning machine, used Tennant 5680 for sale

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings Ledofzk Ewjpfx Al Nsac materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Laodpfx Aefz Dvcsl Nsc The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps Ljdpfx Alsfz I Hxs Nsac • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials Ledpfx Asfz I N Tol Noac In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. Lsdpfsfz Nbljx Al Noac This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Year of construction: 2020, condition: new, PLC microprocessor control Ledpfsf Aaalox Al Noac • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ljdpefz Aw Hjfx Al Njac Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, Washers Ultrasonic Baths for washing, phosphatizing, chromating, degreasing, removing paint coatings materials In ROMER Ultrasonic Washers, stainless steel is used which provides protection against acids. Bathtubs have an additional insulation wall, so they do not lose temperature and heat up faster. Good quality materials ensure long life of the vibrating elements. Heating system Laedpfx Aefz Dtzel Noc The heaters used in the ROMER bathtubs are made of the highest quality materials and are made of high temperature resistant ceramic elements. The heating system used ensures great thermal efficiency, hot water automatically mixes with cold water, heating the entire bathtub. Ultrasonic transducers Ultrasonic elements used in ROMER washers are installed in immersion modules, which better reflect vibrations and are exchangeable. The ultrasound range is 20-40kHz depending on the washed element, lower frequencies are used for large elements of high strength, lower for jewelry, sensitive mechanical systems, etc. All transducers are connected by high temperature resistant cables.

Year of construction: 2020, condition: new, An automatic car wash is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic car wash is equipped with a set of pumps for spraying, it has been designed so that as little liquid as possible migrates to subsequent processes after the process, saving money and improving the quality of washing. This is very important, because the apparent savings in systems made without the use of these solutions may generate much higher costs in the future related to chemicals and waste disposal, which will be simply more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development works allowed us to develop a car wash with the function of drying details (Option) with hot air blown by a set of fans after the washing process. The car wash is equipped with an advanced system of creating own macro programs, which can consist of 10 steps each, depending on the number of tanks, the processes can be repeated, their order can be changed, etc. Each of the tanks has its own unique icon and name, enabling the operator to work intuitively. Laodpfxofy T Rce Al Nec Optionally, the tanks can be equipped with bath replenishment systems, which can be carried out e.g. between processes or at the end of the cycle. • Controls installed on a swivel arm for better access • PLC microprocessor control • 7 "touch control panel • A very large number of nozzles compared to other solutions • (Option) Possibility of drying details after washing • Ability to create your own advanced programs • Advanced system of dampers made of acid-proof steel sheets, double secured with limit switches • Control system for tight closing and full opening of the flaps • To minimize fluid mixing, separate lines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, the fluids cannot be mixed • Fully automatic operation

Condition: reconditioned (used), functionality: fully functional, operating pressure: 180 bar, empty load weight: 159 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KARCHER HDS 8/18-4M HOT WATER WASHER This device features new accessories, including a German R+M gun, a stainless steel lance, a steel braided hose, and a 25° power nozzle. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable operation even during prolonged use. Lasdpfey Tw Hbjx Al Nec With operating parameters of 180 bar and 800 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Model HDS 8/18-4M Power supply voltage: 400V ~ 3 phase Discharge capacity (l/h): 400 - 800 Working pressure (bar) 30 - 180 Max. Water heating temperature (°C) 80-155 Connection power (kW) 5.5 Fuel tank capacity (l) 25 Cleaning agent tank capacity (l) 20 + 10 Pressure hose length (m) 10 Weight (kg) 159 Dimensions (L x W x H mm) 1330 x 750 x 1060 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 10m steel braided pressure hose NEW 25° power nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Two built-in chemical tanks allow for the dispensing of cleaning fluid directly through the The machine is easy to use and has a clear and intuitive control panel. The simple design and easy access to individual components under the housing make the machine user-friendly and easy to service. The RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other pipes. The exhaust gas temperature sensor shuts off the engine at temperatures exceeding 300°C. When the eco!efficiency function is activated, the device heats the water to 60°C, allowing for effective cleaning of even the most stubborn stains while reducing fuel consumption by approximately 20%.

Condition: used, Bolts, hex bolts, flange nuts, hex nuts, collar nuts, washers, washers -Washers: Washers, various sizes 276 kg -Sizes/number: Ø10.5 to Ø31.5 mm see photo parts list Ledpfx Aoirnwxjl Neac -Price: complete -Total weight: 276 kg

Condition: good (used), Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 17 mm, length 400 mm -Hole spacing: 540 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 590/60/H83 mm Lajdjux Saxjpfx Al Noc -Weight 4.8 kg/piece

Condition: excellent (used), strapping machine, strapping set, tensioning and sealing device, textile strapping set -Manufacturer: Vematec, textile strapping set 19 mm with tensioning device, unwinder, accessories -Steel reel: with 2x polyester tape width 19 x 1 mm -Staples/reel tensioners: see photos -Transport dimensions: 560/480/H480 mm Laodpfxjvrdzws Al Noc -Total weight: 32.4 kg

Condition: used, Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: 2 pieces -Groove width: 14 mm, length 380 mm -Hole spacing: 470 mm / Ø 14 mm -Delivery/Price: complete -Dimensions: 500/55/H72 mm Lsdpfeux R U Uex Al Neac -Weight 3.1 kg/piece