Used Thermo Forming for sale (4,450)

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: Csdpfxohh Ibtj Aflsaa ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Codpfoxukkysx Aflsaa Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: good (used), Year of construction: 2013, machine/vehicle number: AKA0003767, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Cedpfx Afjwp R A Ijljaa Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none Please contact Pedro or Arie for more information 11x Thermo-King 2013 Clip-on SG 3000: - ID 10756 - 12.148 hours - ID 10757 - 14.130 hours - ID 10758 - 16.689 hours - ID 10759 - 15.023 hours - ID 10760 - 11.946 hours - ID 10761 - 9.652 hours - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours - ID 10764 - 12.474 hours - ID 10766 - 11.146 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Condition: used, Measuring system for radiation measurement. Measurement of radioactivity. The stated price is for both devices together. Inspection is possible by appointment at my warehouse! Shipping via freight forwarder is also possible! Csdpfx Afjpcfz Nolsaa

Condition: used, Year of construction: 2011, Overview  This shrink packer was manufactured in 2011 by the Italian company Giemme Thermo. The Giemme SLH is a film-only shrink wrapping machine used for secondary packaging of multipack PET bottles (1.5 L format). The machine is equipped with two parallel lanes, allowing high throughput and flexibility in packaging configurations. The machine is no longer in production but still installed and will be available from December 2025. A set of spare parts is included, and dismantling and truck loading can be quoted separately. Technical data  Capacity: 20 cycles/min Formats: 2 × (3 × 2) × 1.5 L 6 × (2 × 1) × 1.5 L Application: Cider, lemonade, soda, carbonated beverages Power Supply: 40 kW Dimensions (L × W × H): 650 × 170 × 250 cm Configuration: Dual-lane infeed for higher flexibility Film Type: Shrink film only (no tray) Condition: Very good; still installed and connected Availability: 20 December 2025 Cajdpfx Afjxrc Hhelea

Year of construction: 2012, condition: like new (used), functionality: fully functional, Special opportunity! Cedpfovph Enox Afljaa From stocks in the state of Rhineland-Palatinate, we can offer you these well-maintained CO2 incubators from the global brand "Heraeus" or "Thermo Electron" type HERAcell 150 in copper design. The HERAcell 150 is one of the most used and reliable devices in the sector, and is now an indispensable part of almost every laboratory worldwide. It has a completely copper interior with a water tank integrated directly into the work area, which makes working even easier, and three copper shelves. The devices were purchased by a biology institute at the university, but were hardly used, and mostly only switched on for testing purposes - all components including the shelves are in a technically and visually very well-maintained condition - see pictures. There is no damage or malfunctions, the devices can be put into operation immediately - however, for the sake of good order, we would like to point out that all regular tests in accordance with STK / MTK must be carried out again before commercial use! The greenish discoloration shown is due to the use of water in combination with copper during the functional tests and does not limit usability in any way. In addition to the device itself, three shelves, power cable and voltage converter from 120 to 230 volts are included, as the devices were originally ordered with a 120 volt power supply. The price is for one device with accessories as described. Technical data: Capacity (Anglo-American)5.3 cu. ft. Data Output RS232 Capacity (metric)150 L Chamber Material Copper CO2 Concentration Range0 to 20% CO2 Sensor TechnologyTC Sensor Lighting LED MaterialCopper O2 Concentration Range Optional 1 to 21% or 5 to 90% Oxygen Control Optional 1 to 21% or 5 to 90% Relative Humidity

Condition: like new (used), Thermo Scientific metal detector Model: Apex 500 Casdpfsfiud Eox Aflja Stainless frame, elevates from 300mm to 950mm, pneumatic blow reject with reject bin, 450mm x 160mm, belt dimensions 3300mm x 320mm, 3Ph, mobile

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Casdpfexukh Esx Aflja Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: good (used), functionality: fully functional, A Thermobend 2000 is a bending machine used for bending plastic sheets such as PMMA (acrylic glass) and methacrylate. The machine operates with heating wires to heat and bend the sheets at specific locations. Key features Capacity: The machine has a usable length of 2000 mm. Functionality: Can bend sheets with a thickness of 1 mm to 20 mm. Configuration: Equipped with 2 bending beams heated both from above and below. The distance between the wires is adjustable, with 3 wires above and 3 below per group. Dimensions: Length: 3200 mm x Width: 1000 mm x Height: 1600 mm Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: Cjdpfxjxn T Nrj Afljaa Margin: The listed price includes VAT (VAT is non-deductible for businesses).

Condition: used, Technical details: tank capacity: - l Csdpfxsu Nw Enj Afleaa voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS SYSTEM The system has been dismantled. We are selling the system/parts at cost price! Areas of application, e.g.: All types of contaminants are filtered out. e.g. bacteria, viruses, pesticides, nitrate, fertilizer residues, lime, salts The system was preserved in 2014. i.D. *

Condition: used, Falling Ball Viscometer like Thermo HAAKE Type C THERMO ELECTRONIC CORPORATION Type 002-7580 Serial No.: With the Thermo falling ball viscometer, you can measure viscosity precisely without electricity, using only a stopwatch. It allows for accurate measurement of the viscosity of transparent Newtonian liquids and gases. Measuring principle: A ball moves by rolling and sliding inside an inclined cylindrical tube filled with the liquid to be tested. The time it takes for the ball to travel a defined measuring distance is recorded. By swiveling the measuring section, the return movement of the ball can also be used for measurement. The result is displayed as dynamic viscosity in mPa·s. Max. viscosity: 100,000 mPa·s Min. viscosity: 0.5 mPa·s Cjdpfx Asxcbnrjfloaa Standards: DIN 53015, ISO 12058 Reproducibility: < 0.5% Thermometer: -1 °C to +26 °C (read-out accuracy 0.1 °C) Ball set Type 800-0182 with 6 balls (balls 1 and 2 made of borosilicate glass; balls 3, 4, 5 and 6 made of nickel-iron alloy) Recommended for: Chemical industry (polymer solutions, solvents, printing inks) Pharmaceutical industry (raw materials, glycerin) Mineral oil industry (oils, liquid hydrocarbons) - Inner glass tube (falling tube) damaged on one side at the screw socket (see images). Replacement part no. 002-6968 Dimensions of inner tube: outer diameter 20 mm; inner diameter 16 mm; wall thickness 2 mm; length 225 mm Dimensions (W x H x D): 170 x 310 x 220 mm Weight: 3.5 kg

Condition: ready for operation (used), year of construction: 2011, 230 V, 50 Hz, 1.2 KVA, chain belt, clearance: 95 mm, dimensions checkweigher: 4350 mm x 750 mm x 1620 mm, dimensions switch cabinet: 800 mm x720 mm x 1810 mm. Cjdpfx Aexuwwajfloaa

Condition: used, functionality: unexamined, machine/vehicle number: SPA-3 | RADEYE SX DB-078, Thermo Fisher SPA-3 Radiation meter set Thermo Scientific SPA-3 Waterproof High Sensitivity Gamma Detector for use when high sensitivity to radiation is required. Set includes: Two travel cases, SPA-3 Radiation Meter, RadEye SX DB-078 Detector, stand, cover, cable, and instruction manuals. Codpfx Aexcufwsfleaa

Condition: used, This listing is for the Thermo Scientific Finnpipette F1 Pipette 8 Channel The unit is in full working condition and is ready for immediate use The Thermo Scientific Finnpipette F1 manual pipettes designed for precision, ergonomics, and ease of use in laboratory settings. Available here in a multichannel configurations, the Finnpipette F1 caters to a wide range of liquid handling needs. Key Features Caodpfx Asxl Ezheflja Ergonomic Design: Lightweight handle with low plunger and tip attachment forces to reduce the risk of repetitive strain injuries (RSI). Silent Volume Adjustment: Features a silent and lighter volume adjustment mechanism with over 50% lower forces compared to earlier models. Secure Volume Lock: A secure volume setting prevents undesirable volume drift during operation. Simply lift the plunger up to set volume and press down to lock in place with minimum effort. Adjustable Finger Rest: The 120° adjustable finger rest accommodates both right- and left-handed users, allowing the hand to relax during pipetting cycles. Super Blow-out: 150% increase in air boost to ensure efficient delivery of micro-volumes and prevent capillary action in 50 µL models and below. Compatible Tips: Designed to work seamlessly with Thermo Scientific Finntip pipette tips for optimal performance.

Condition: like new (used), Thermo Scientific ThermoChill II Recirculating Chiller For sale: Thermo Scientific ThermoChill II recirculating chiller – a professional device designed for precise cooling of laboratory and industrial systems. The unit is in factory-new condition, fully operational and ready for use. Caedpfexuzt Sjx Aflja Ideal for use in laboratories, research processes, cooling of analytical equipment, lasers, spectrometers, vacuum systems, and cooled process circuits. Technical specifications (ThermoChill II): Cooling capacity: up to 1000 W Temperature range: -10 °C to +30 °C Stability: ±0.1 °C Reservoir capacity: approx. 9.5 L Pump performance: up to 13.6 L/min Power supply: 115V/230 V / 50 Hz Dimensions: 62 × 36 × 60 cm Built-in manometer and digital control panel Manufacturer: Thermo Fisher Scientific (USA) + CE Inspected and ready for operation

Condition: used, Technical details: Csdju Nw Hlopfx Aflsaa tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS PLANT *

Year of construction: 2017, condition: used, Cooling group / cooling unit Cjdewramujpfx Afleaa Frigoblock Year of construction 2017 Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: new, Thermo Scientific Wellwash Microplate Washer Cjdpfjtzb D Dox Afloaa Description Reliably wash 96-well plates with the Thermo Scientific Wellwash, a user-friendly and reliable microplate washer for routine ELISA applications. The washer features a graphical user interface, multiple language options, and a USB port for optimal ease of use and convenience. Features: Large, clear color display and keypad ensure ease of use. The user interface is logically and intuitively structured, allowing for rapid protocol programming. User-friendly software requires minimal training and ensures a quick start. Pressure-free bottles are safe to use. Liquid level sensors in the wash and waste bottles ensure safe runs. Automatic pre-rinse function ensures safe performance. Aerosol cover prevents the escape of aerosols of infectious material. Plate sensor detects whether a plate is present. Wellwash effectively removes excess liquid from wells. Low residual volumes ensure optimal wash performance and reliable assay results. More items in other sizes—new and used—can be found in our shop! International shipping costs upon request!

Condition: used, Thermo Scientific HERAcell 150 i CO2 incubator cabinet Chamber volume [l]: 150 l External dimensions (W x H x D): 637 x 867 x 782 mm Internal dimensions (W x H x D): 470 x 607 x 530 mm Interior material: Solid copper You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Csdpfjtzakqox Afljaa Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, This listing is for a Thermo Scientific Dionex AS-DV Autosampler. The unit is in full working condition and is ready for immediate release. Please note that ULM do not check or guarantee the provision of software Software Thermo Scientific Chromeleon 7 license key usb- Built for the lab and IT, Chromeleon CDS chromatography software enables both productivity and regulatory compliance with automated controls, data analysis, and security tools. The Thermo Scientific™ Dionex™ AS-DV Autosampler is an innovative solution for automating sample handling in routine ion chromatography applications. It’s designed to enhance productivity while maintaining cost-effectiveness, perfect for labs focused on ion and water analysis. Key Features: Automated Sample Handling: Random Access and Flexibility: Offers random access for multiple injections and filtration, allowing labs to run samples efficiently without manual intervention. High Reproducibility: Ensures consistent results thanks to precise mechanics that control dispense speed and volume. User-Friendly Control: Please note that ULM not to check the software and cannot guarantee the provision Cedpfjxhf Utsx Afleaa Chromeleon™ CDS Software: The powerful software simplifies programming for injection loops and concentrator columns, allowing users to easily set optimal parameters. Advanced Sample Preparation: Optional Six- or Ten-Port Valve: This feature facilitates complex sample preparation techniques, including matrix elimination and sample concentration, enhancing analytical capabilities. Performance & Compatibility: Needle and Flow Path: Constructed from all-Thermo Scientific™ PEEK™, ensuring durability and minimal contamination. Vial Compatibility: Works with 5.0 mL and 0.5 mL polymeric vials, and filter caps can be used for automatic filtration, promoting better results. Injection Volume Range: Supports injection volumes from 0.1 to 5 mL, accommodating various experimental needs. Sample Capacity: Can hold up to 50 vials of either size or a mix of vials, adding to its versatility. Specifications: Dimensions: Height: 9 in (23 cm) Width: 17.5 in (44.45 cm) Depth: 22 in (56 cm) Weight: 16 kg Speed Control: Adjustable from 0.1 to 5.0 mL/min in 0.1 mL/min increments. Voltage: Compatible with 100/240 V. Compatibility: Works seamlessly with various ICS systems, including ICS-5000, ICS-2100, ICS-1600, ICS-1100, ICS-900, and legacy IC systems.

Condition: excellent (used), Laboratory Freezer -86°C Thermo Fisher Scientific 88700V61 . Professional ultra-low temperature freezer for long-term storage of biological and laboratory samples within a temperature range from –86°C to –50°C. Model Thermo Fisher 88700V61 — a reliable unit with a capacity of 949 L, ideal for laboratories, research facilities, and biotechnology companies. . Technical data: • Temperature: –86°C • Capacity: 949 L Cajdpfx Ajxuzp Toflja • Power supply: 230 V / 50 Hz • Power consumption: 9.5 A • Climate class: N . Condition: used, 100% technically functional. Available: 4 units, price per unit

Year of construction: 2013, condition: used, Cooling unit Frigoblock FK35 SL Year of construction: 2013 400V 28A Cevoman bvba. Lenskendijk 5 2200 Herentals Caedpfxswl Av Ss Aflea Belgium

Condition: used, This listing is for the Thermo Scientific Finnpipette. 0.5ml The unit is in full working condition and is ready for immediate use The Intuitive menu and simple button layout, allow you to choose all the pipetting functions you need quickly and easily. Cedpfx Ajxhf Nqjflsaa The large display is easy to read and shows the full names of all functions. Easily accessible menu offers 10 different pipetting functions and 9 pipetting speeds to handle a wide variety of pipetting applications. Select common functions such as forward, reverse, diluting, and stepper pipetting or advanced functions like mixing, sequential stepping, or program up to 9 of your own functions. Solid-shaped and perfectly balanced handle fits comfortably and securely in your hand, and together with the finger rest, it keeps pipetting stress and exertion to a minimum. Ergonomically designed to let your index finger control dispensing with just a soft press of the button. Adjust the finger rest a full 120° of movement to fit your hand exactly— whether you’re left- or right-handed. Very low tip ejection force minimizes strain on your thumb.

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Casdpfxoxhfpwo Aflja Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: used, This listing is for the Thermo Scientific Heratherm IMH180 Incubator The unit is in full working condition and is ready for immediate use The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical. Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Csdpfoxhd Ixjx Afljaa Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corn Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housin