Used Tiefbord 8 25 100 for sale (61,264)

Condition: new, Indramat TRK6-4U-380 / 100-G1 / 551 Pulse-thyroid control amplifier SN:219444-004991, unused, 100% functional, scope of delivery as per photos Fgsdpotyr A Aofx Al Soh

Condition: used, Lens, lenses Fgjdeb Nfc Sspfx Al Seh -Number: 6x lenses -packed: individually -Dimensions: 110/110/H35 mm -Price: complete for all 6 pieces -is only sold complete -Weight: 0.3 kg/piece

Year of construction: 2016, condition: new, Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm Fgjdpfxjcmr D He Al Seh internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Fgodpfxjuayyyj Al Ssh Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, Electric motor, three-phase motor -Power: 0.35/0.5 kW Fgjdpfx Aed Sx Ngsl Soh -Speed: 660/1325 rpm -Shaft: Ø 24 x 50 mm -Construction: B5 -Protection class: IP 54 -Dimensions: 330/199/H230 mm -Weight: 10.3 kg

Condition: used, Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders -Martonair type: RM/8080 R -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Max. Pressure: 16 bar -Stroke: 100 mm -Price: per piece -Number: 4 pieces Fgjdpfx Aljd S Aqbe Soh -Dimensions: 92/92/H320 mm -Weight: 3.45 kg

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 800 x 800 mm, 20 - 100 plates, open or closed spout, 20, 25 or 30 mm cake thickness, pressure max. 10 -15 bar, capacity 200 - 1500 liters, filter surface 20 - 100 m², dimensions 2500 - 9000 x 900 x 1300 mm, weight 3500 - 10000 kg, motor hydraulics, with or without plate transport, with or without filter cloths Fgjdpfx Alefbbp Sj Ssh

Condition: reconditioned (used), Year of construction: 2021, Gantrycrane 2x35 ton 25 or 28 meter spann longer possible Fgedpfx Aloggggpe Seh

Condition: refurbished (used), Year of construction: 2018, operating hours: 6,590 h, functionality: fully functional, machine/vehicle number: SR2512-100-228, number of ink cartridges: 5, color channels: 5, number of print heads: 3, resolution (max.): 1,200 dpi, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 100 mm, paper width (max.): 2,500 mm, paper height (min.): 1 mm, paper height (max.): 100 mm, total length: 2,100 mm, total width: 4,700 mm, total height: 2,100 mm, space requirement length: 3,000 mm, space requirement width: 6,000 mm, space requirement height: 2,000 mm, year of last overhaul: 2026, type of input current: three-phase, input current: 32 A, input voltage: 380 V, SignRacer UV Digital Printing System - SR2512 Flatbed Digital Printer, UV-curable inks. High-performance production machine for printing on a wide range of materials using UV-curable inks. Ideal for printing on boards and sheet materials such as aluminium composite panels, PVC sheets (rigid or foam), acrylic glass, glass, metal, wood, cardboard, as well as cut-to-size films. Even challenging substrates, such as heat-sensitive materials, can be printed with ease thanks to the stepless adjustment of the UV lamps, preventing excessive heat build-up. Integrated, retractable registration pins enable precise and effortless positioning of print media, making accurate series production possible. The printer features highly accurate print control, ensuring excellent repeatability when printing multiple passes (e.g., for 2.5D, relief effects or Braille lettering). Technical data: - 3 Ricoh GEN-5 printheads - Print resolution up to 1200 x 1200 dpi - Ink configuration: CMWK-WW - 2 LED lamps with up to 8 watts drying power - Lamp intensity continuously adjustable - Print area approx. 2500 x 1200 mm - Maximum material thickness 100 mm - Automatic material thickness measurement - Manual material thickness adjustment possible - Vacuum table with 4 independently adjustable vacuum zones - Ink system with 1-litre bottles - No chip recognition required (open system) - Power connection: 32A – 380 volts - Dimensions approx.: 4930 x 2190 x 1320 mm (without monitor arm) - Weight approx. 1490 kg The machine is operational and can be inspected at any time in 45884 Gelsenkirchen. The listed price is ex works Gelsenkirchen plus transport costs. Installation and on-site training can be offered for an additional charge (not included in the price). Year of manufacture: 2018 – Refurbished 2025* *All ink-carrying components such as ink tubes, filters, pumps, etc. have been replaced. Printheads are used but in flawless condition (see nozzle test printout). All relevant drive components checked and calibrated. €18,900 excluding RIP software Fgjdpfxeyc Nt Rj Al Ssh €20,900 including current Onyx RIP software Onyx Postershop Version 25 SignRacer Edition.

Condition: new, AEG Modicon S975 - 100, model AS-9305-002, processor for 984, unused, 100% functional. Fedpfxoi D Tu Ro Al Ssgh

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Fgedpex U Dnusfx Al Sjh Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Condition: used, Magnetic Separator, Overbelt Magnetic Separator, Ferrous Metal Sorting Conveyor, WAGNER MAGNETE 0428-25/60, used machine Manufacturer: Wagner Magnete GmbH Type: 0428-25/60 Factory identifiers: Nr: 508395 Weight: 1100 kg Electrical data: 400 V Belt dimensions: 1340 × 600 mm Overall dimensions: 2480 × 1630 × 1100 mm Fodpfx Aozv S Naol Sogh Design / Material: Robust industrial steel frame, with internal high-performance magnetic block and discharge conveyor belt Conveyable / Separable material: Extraction and separation of magnetic ferrous metals (steel, iron, fasteners, structural parts) from bulk material flows (waste, e-waste, shredder residue, glass, construction rubble, wood chips) or any type of material from which magnetic particles/materials need to be separated

Condition: used, Year of construction: 2010, Technical details: pressure: 80 t chamfer lenght: 2500 mm distance between columns: 2125 mm max. ram stroke: 200 mm plate thickness: 6 mm total power requirement: 9 kW operating pressure: 275 bar throat: 420 mm ajustment speed: 100 mm/s working feed: 10 mm/s weight of the machine ca.: 5,8 t dimensions of the machine ca.: 3,8 x 2,4 x 2,95 m NC pressbrake, controlled axis: Y1, Y2, X1, R with toolcabinet incl. accessories, barely used! Fgedpfx Aezpaqfel Sjh *

Condition: ready for operation (used), Year of construction: 2006, operating hours: 102,060 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, injection pressure: 2,429 bar, mold height (min.): 300 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 600 mm, total length: 4,240 mm, total width: 1,510 mm, total height: 2,180 mm, overall weight: 7,800 kg, heating capacity: 10.97 kW (14.92 HP), pump power: 18,500 W, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, We are offering this used KraussMaffei 100-380 CX injection moulding machine, year of manufacture 2006. Injection moulding machine: KM 100-380 CX International size designation: KM 380 CX/100 Year of manufacture: 2006 Serial number: 61009013 Machine weight: 7,800 kg Condition: ready for operation (used) Pump operating hours: 102,060 Automatic mode operating hours: 87,744 Specification: Screw diameter: 35 mm Clamping force: 1,000 kN Injection volume: 154 ccm Maximum injection pressure: 2,429 bar Shot weight: 59 ccm Minimum mould height: 300 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 900 mm Distance between tie bars: 420 mm Locating ring, injection side: Ø125 mm Locating ring, ejector side: Ø125 mm Ejector force forward/backward: 22.6/9.9 kN Ejector stroke: 150 mm Machine dimensions (LxWxH): 4,240 x 1,510 x 2,180 mm Machine weight: 7,800 kg Heater capacity: 10.97 kW Pump motor power: 18.5 kW Fgodpfsyf E Amjx Al Soh Input supply: 400V, 50Hz standard industrial three-phase Equipment: documentation included If you have any additional questions or require further information, please send us a message or call us.

Condition: new, SCHUNK DPG 100 parallel gripper, serial number: 370253 + accompanying documents DPG 100/1 and DPG 100/1 S, unused, in opened original packaging, 100% functional, scope of delivery as shown in the photos. Fodpfx Alezd I Eyj Ssgh

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,332 h, functionality: fully functional, machine/vehicle number: 179814, screw diameter: 30 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 79 A, For sale: ARBURG ALLROUNDER 420 C 800-100 injection molding machine Manufacturer: ARBURG Model: ALLROUNDER 420 C 800-100 Year of manufacture: 2000 Control system: Selogica Screw diameter: 30 mm Technical specifications Factory number: 179814 Supply voltage: 400 V Control voltage: 230 V / 24 V Connected power: 42 kW Rated current: 79 A Made in Germany Condition ARBURG hydraulic injection molding machine in good technical condition, regularly maintained. The machine is operational, can be tested, and is ready for immediate use. Key features Selogica control system 30 mm screw Stable, reliable operation Immediately available Can be viewed in operation Location: Sarkad, Hungary Seller: Variflux Kft. Fodjzim Taopfx Al Sjgh Upon request, we can send additional photos, videos, and technical information.

Condition: used, functionality: fully functional, Year of construction: 2016, machine/vehicle number: 2460108, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, tire size: 0,41 x 0,13 m, color: red, transport length: 2,800 mm, transport width: 990 mm, transport height: 1,990 mm, Equipment: UVV, Technical specifications Year of manufacture: 2016 Motor: Electric (2 x 1.5 kW) Fgedpfx Aljzmfm Hj Soh Working height: 9.85 m Platform height: 7.85 m Max. lateral outreach: 3.15 m Basket capacity: 200 kg Upper carriage rotation: 350° Platform dimensions (L x W): 1.11 m x 0.93 m Overall dimensions (L x W x H): 2.80 m x 0.99 m x 1.99 m Boom length: 1.50 m Weight: 2,650 kg Climbing ability: 25% Travel speed: 0.65 km/h - 5 km/h Fully operational, general signs of use

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 2460428, power: 1.5 kW (2.04 HP), load capacity: 200 kg, lifting height: 7,850 mm, platform length: 1,110 mm, platform width: 930 mm, overall weight: 2,650 kg, fuel type: electric, tire size: 0,41 x 0,13 m, color: red, Equipment: UVV, Manitou 100 VJR Telescopic Mast Lift Technical Specifications: * Working height: 9.90 m * Platform height: 7.90 m * Load capacity: 200 kg * Overall width: 0.99 m * Overall length: 2.82 m * Overall height: 1.99 m * Weight: 2,650 kg Equipment: * Proportional control joystick * Drive possible at maximum outreach * Audible warning signal and indicator light for tilt and overload * Integrated battery charger * Manual emergency lowering * Negative brake * Audible warning system in the work basket * Hour meter * Battery charge indicator * Crane lugs * Integrated diagnostics system * Non-marking tires * Work platform with anti-slip perforated floor * CAN-BUS technology * Toolbox in the work basket Optional features available: * New CE inspection (UVV) * Removal of our company decals * Custom paintwork and decals on request Fgsdpfx Ajzmf E Asl Soh * New batteries * Warranty * New service * Delivery within Germany

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Fedoy Avnpspfx Al Ssgh Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, FTC-200 Tracked Cone Crusher; It is produced in the form of feeding bunker, generator, cone crusher and stock belt.FTC-200 Tracked Cone Crusher, which is moved with a remote control on a steel track, successfully completes all commands by moving on its tracks in all difficult climatic conditions and rough terrain.FTC-200 Crawler Cone Crusher, which is delicately designed and meticulously manufactured for crushing stone, is the leading crawler crusher plant in the industry with its weight of 41,000 Kg and a crushing capacity of 100-180 T/H per hour. Eliminates Infrastructure Requirement FTC-200 Tracked Cone Crusher does not require an extra infrastructure as a production method, it can be moved by remote control and adapts to all difficult terrain conditions. Fgedpfx Aezibahjl Ssh Belt Feeder The Belt Feeder is the system in charge of quickly sending the loaded products to the crusher for the crushing process.It has a belt feeder motor protection system that gains mobility thanks to 2 motors. Thanks to this system, malfunctions that may occur as a result of overheating are prevented.The working intensity of the Belt Feeder and the crusher is coupled with the automation system. This feature works in two steps. Step 1: If the density of the crushed product in the crusher is high, the amperage of the crusher rises and this rise is detected by the automation system, the bunker transfer stops.It prevents product accumulation in the crusher feeding chute. This feature prevents the crusher from being worn out. Step 2: If the density of the crushed product in the crusher is low, the amperage of the crusher decreases. This decrease is detected by the automation system and bunker transfer increases. The feeding hopper delivers the products to the crusher faster. This feature keeps the production capacity at the maximum level. Cone Crusher Cone crushers are the crusher of FTC-200 Tracked Crushing Plant that can easily crush hard stones.The power transferred from the engine to the gear shaft is sent to the hub with gears.Thanks to the core and concave inside the crusher, it crushes the stones and breaks them into pieces. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of tapes can be increased upon the request of the user.10 mm EP 125 4-ply Band elastics, moving on 4mm st 37 Twisted Sheet, perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.Belt Elastics, which are produced resistant to wear, will never let you down and offer many years of service life. Pallet System The basic element that enables the movement of the FTC-200 Tracked Cone Crusher is the pallet system.Pallets carry the entire weight of the crusher. FABO, which does not ignore the importance of the pallet system on the crushing plant, has carried out various R&D studies and has revealed the pallet system that provides maximum durability, low maintenance cost and long-term service to its user in accordance with A1 Quality CE standards.

Year of construction: 2006, condition: used, edge thickness (max.): 12 mm, feed rate X-axis: 40 m/min, plate height: 60 mm, plate length: 2,400 mm, plate width: 1,000 mm, machine/vehicle number: 0-202-48-1184, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! The machine package consists of four machines, composed as follows: Pos. 1 - KUKA KR 180-2 PA Serial number: 940443 Function: Loading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cups Pos. 2 - HOMAG KFL10/24/PU/30 Serial number: 0-202-48-1184 Machine type: Edge banding machine Adhesive system: PUR, laser Max. feed speed: 40 m/min Operating units: 12 Panel height min.: 8 mm Panel height max.: 60 mm Panel length max.: 2,400 mm Panel width min.: 85 mm Panel width max.: 1,000 mm Edge thickness min.: 0.3 mm Edge thickness max.: 12 mm Number of panel formatting/milling units: 3 Pre-milling cutter Corner rounding unit Grooving unit Pressing system Panel support guides Positioning via NC Alignment system for panel infeed Panel formatting/milling units Unit 1: Pre-milling unit Automatically timed engagement Positioning via NC unit Unit 2: Double cutter, top and bottom Model: KD 10 Motor power: 6.6 kW Speed: 6,000 rpm Positioning via NC Unit 3: Pre-milling unit Motor power: 4 kW Speed: 8,640 rpm Automatically timed engagement Positioning via NC Gluing and edge system Number of positions in edge magazine: 24 Premelter model: ROBATECH PU-Premelter 18 Laser Lamps for preheating the panel side Edge processing units Number of edge processing units: 8 Edge processing unit 1: Trimming unit Number of motors: 2 Positioning via NC Edge processing unit 2: Rough milling, top and bottom Number of motors: 2 Edge processing unit 3: Fine milling for flush and radius milling Number of motors: 2 Positioning via NC Edge processing unit 4: Corner rounding Number of motors: 2 Automatic tool change Positioning via NC Edge processing unit 5: Milling/chipping unit Number of motors: 1 Motor power Unit 5: 12 kW Speed Unit 5: 10,000 rpm Automatic tool change Positioning via NC Edge processing unit 6: Edge smoothing blade Positioning via NC Edge processing unit 7: Glue application blade Edge processing unit 8: Buffing unit Number of motors: 2 Control and equipment Control system: POWER CONTROL PC 21 Barcode reader model: DATALOGIC Fodpfxjy Ur Hls Al Segh Pos. 3 - KUKA KR 180-2 PA Serial number: 940444 Function: Unloading station Load capacity: 180 kg Number of controlled axes: 4 Arm reach: 3,200 mm Number of panel stacking stations: 2 Control system: KR C 2 Motion system with frame Suction cup system Pos. 4 - LIGMATECH ZTR 100/30/26/S Serial number: 0-309-04-4129 Machine type: Panel return system for edge banding machine Panel width max.: 1,000 mm Panel length max.: 2,400 mm Control system: POWERCONTROL PC 52 Panel ejection Panel feed The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8522

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock Fodpfx Aevxh Iuel Sjgh

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Excellent condition, very high specification machine. New cost in excess of EUR 300,000 We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details. Fodpfx Asx Alr Isl Ssgh

Condition: new, sheet thickness: 8bending length: 2600upper roll diameter: 210 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- Fjdpfxsd Ab Sfs Al Sjgh - center support EURO 8.250,-- - side supports EURO 6.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, Year of construction: 1989, sheet length: 3.100sheet thickness: 8,0cutting area width: 3100total power requirements: 11weight approx.: 7500messurements (LxWxH): 4180 x 2150 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Fgsdpsru Un Hsfx Al Ssh Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)