Used Timber Drying Kiln for sale (339)

Condition: new, Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C Rsdjrxtuispfx Ab Roch The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6381/99, 2 connected kilns, timber volume, each 142m3 , total = 284 m3 concidering: - 50x100 boards, stacking factor 0.85 - each kiln 24 stacks 4.2x1.2x1.2m + 12 stacks 5.1x1.2x1.2m ; 1m free space in front and 1m behind the stacks, 0.15m between the stacks - inside dimensions of each kiln: width 15.2m (3 stacks), depth 7.3m (4 stacks), height 4.1m (3 stacks) - dimensions of loading door 15.2x4.1m , lifting-sliding type of 2 pcs. Inspection doors in rear walls. Rcodpfx Abjwynnie Reh - loading system frontal forklift , 2 sliding trolleys for the loading door of lifting-sliding type Heating power 610,000 Kcal/h at 60'C inside temperature. Heating system: hot water, 90'C at inlet min, bi-metal pipes, stainless steel core with external aluminium fin, including the automatic valve for the hot water with intercept valves and stainless steel pipes till rear wall of dryers Rehumidification: cold water 3.5 bar, 150l/h. The spraying device by stainless steel pipe and changeable nozzles on brass. Number of fans each kiln, installed in long aluminium pipes (Nardi patent): 12 , reversible, 800mm, changed power motors 4.0/1.1kw, two speeds. Long pipes increase the air flow, reducing the pressure drop, saving energy. The horizontal aluminium baffles closing the free space over the stacks Number of vents each kiln: 8+8 cast aluminium vents Snow load 120 kg/m2, wind speed 100 km/h The electric switchboard cabinet per each kiln. Voltage: 400V , 50Hz . Type of control: LEONARDO 3000 (renewed in 2007) Each kiln has 12 wood moisture probes, 2 kiln temperature probes and 2 kiln relative moisture probes, 3 digital read outs of these values. Dismantling will be done by buyer. Seller provide a forklift if needed.

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Rcodpfx Abew Hf Ade Roh Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations.

Year of construction: 2013, condition: used, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Rcjdevwfhispfx Ab Roh

Condition: new, No. 3171 Vacuum drying kiln ISVE ES 2 / NEW New machine, delivery time 120 days Construction features: AISI-304 stainless steel, partially insulated External diameter: 1000 mm Length of cylindrical part: 5000 mm Dryer length: 5900 mm Dryer total length plus sliding guides: 11000 mm Max. operating vacuum: -730 mm Hg Timber pile length: 5000 mm Timber pile width: 800 mm Timber pile height: 400 mm Net wood volume: approx. 2 m3 Installed electrical power: 5,27 kW Average hourly power input: 2,7 kW/h Includes: - 6 electric heating plates (each 800 x 5000 x 10 mm LWH / 40 kg / 0,695 kW) - 1 oil vacuum pump (40 m3/h / 1,1 kW / 380 Vca) - 1 vacuum pump condenser (stainless steel tube with internal condensation system) - 2 one-way valves (clapet: one ¾” for vacuum circuit; one ½” for condenser discharge) - 1 solenoid air return valve (24 Vca: one 1” for the autoclave and one ½” for the condenser) - 1 manual air return (1” ball valve) - 1 electrical control panel (PLC type Siemens S7-1200, with touch panel) - 1 ISVE server connect with remote service and control - 2 wireless moisture probes (double probes for core and surface moisture reading) - 1 wireless temperature probe (for wood core reading) - 2 plates-holder stands - 1 instruction booklet (in English with CE certificate and wiring diagrams) Transport dimensions approx. 6100 x 1150 x 1300 mm LWH Weight approx. 1300 kg Technical details, year of construction and scope of delivery according to the manufacturer, without guarantee Subject to prior sale New machines are covered by the manufacturer's warranty Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Rcodpfxouvi Sas Ab Rsh Terms of delivery: ex location

Year of construction: 2025, condition: new, Equipment: CE marking, A single-chamber kiln, type EKOPOL 1/78, with air circulation, computer-controlled, designed for a net load of approximately 78 m³ of timber (at a 36% chamber fill rate). ===== Product in stock Condition: NEW Rcodpfx Ajw U Aynsb Roh Year of manufacture: 2025 Control system with a lifetime license – available in the following languages: English, German, French, Polish, Russian, and Ukrainian. Remote access: android/ios/windows/macos 2-Year Warranty ===== Loading space dimensions: - Loading width: 13 m - Loading depth: 4 m - Loading height: 4.1 m - Gross loading capacity: 214 m³ - Net loading capacity: 78 m³ (with 36% fill rate) ===== Single-chamber kiln, type EKOPOL 1/78 + Heat distributor with fittings. Includes equipment, installation (self-sufficient team of four fitters, a service technician, an electrician team, and an electronics technician – all equipped with complete tools), commissioning, training, and start-up: €108,000 ===== Optional equipment: 1) Heat recovery system + €25,000 2) Control room + €7,500 3) Inverter + €7,000 Drying kilns manufactured by EKOPOL meet the requirements of the New Approach directives and bear the CE marking, confirming compliance with Polish and EU legislation. EKOPOL chamber dryers are certified with the EU EC declaration of conformity issued by an independent product certification body. The manufacturer provides an EC declaration of conformity. To ensure the highest quality of products and services, EKOPOL has implemented an ISO 9001:2015 quality management system certified by TUV Rheinland Polska. Currently, more than 1,455 wood drying kilns produced by our company are operating across Europe.

Condition: used, For sale - 3 kilns. Excellent technical condition; visual condition as per photos. Please see dimensions and specification for each kiln in attached pdf document. Kilns has been dismantled and standing in our warehouse. We can arrange an assembly of the kilns in the buyers location. For any further questions and inquirys, please feel free to contact us. Rodew Apncopfx Ab Rech

Condition: new, functionality: fully functional, Capacity: from approx. 200 up to over 2,000 EPAL pallets (1.2 × 0.8 × 0.15 m) Product description: The Superplan is a professional system for drying and heat‑treating pallets in full compliance with the ISPM‑15 standard, ensuring proper sanitization for export. Designed to handle any type of wood, it reliably achieves a core temperature of 56 °C for at least 30 minutes, guaranteeing the elimination of pests and pathogens in accordance with international regulations. Available heating options: Rcjdpfxsw Hfv Dj Ab Roh - Gas - Electric - Hot water / steam Its modular design allows for front loading or tunnel configurations, optimizing hot‑air circulation and improving thermal efficiency through controlled internal ventilation and dedicated core‑temperature sensors. Key benefits: - Variable capacity: from 200 up to over 2,000 EPAL pallets per cycle. - Guaranteed compliance with ISPM‑15 export requirements. - Flexible heating options: gas, electric, or steam/hot water. - Energy‑efficient with precise ventilation control and core‑temperature monitoring. - Robust and adaptable: ideal for high‑productivity industrial operations. Superplan is built for pallet manufacturers and wood processors exporting worldwide — combining efficiency, regulatory compliance, and flexible energy options in a single, high‑performance solution.

Year of construction: 1989, condition: used, working area L-W-H 5300x750x630 mm Rcodpovwghwofx Ab Rsh

Year of construction: 2017, operating hours: 1,800 h, condition: like new (used), functionality: fully functional, power: 9.5 kW (12.92 HP), product height (max.): 24,000 mm, machine/vehicle number: mk 20-2, Woodmizer WMDK. 3 phase conainer series of kiln drier , 9.5 kw kiln drier 8.25 cubic metre load of 50mm boards Rsdsxqn Izjpfx Ab Rjch in very good condition and fully functional heat and vent kiln , fitted in a 6 metre insulated container , has external trolley frame . only 1800 hours run time . just plug it in and ready to go

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods! Rjdpeh Tyrwsfx Ab Rsch

Year of construction: 2025, condition: new, Drying container WISSMATEC Drying floor Hydraulic moving floor Year of manufacture 2025 Optional: - Discharge and dosing screw conveyor - Rotary valve - Hydraulic lid - Manual lid - Cyclone Rsdpfx Abexd Uzno Rsch - Ventilation system

Condition: used, Trolley 12 levels - year of construction unknown - min. part length 320 mm - max. part height approx. 90 mm - number of levels 12 pcs. - distance between levels 100 mm - insertion depth of levels 650 mm - Upright stands 300-450-450-300mm, 5 pcs. - Total height 1.740 mm - Total width 1.540 mm Rjdpswbtvuefx Ab Rjch

Condition: good (used), Paint booth Drying booth Paint spraying system Manufacturer: LUTRO Rodpfx Aeri I Nbjb Rsch Internal dimensions: LxWxH = approx. 750x500x400 cm Bolted steel construction with sandwich panels Room volume: approx. 150 m³ 2 front extraction walls as well as supply air ceiling with 4 sections Each side equipped with 4 explosion-proof lights, each with 4 fluorescent tubes Front fully openable with segment door Cabin roof can be opened centrally for entry with an overhead crane 2 side entrance doors Complete with control cabinet Extraction motors, etc. Heating system for warming supplied air Airless spray device 221025ä

Condition: like new (used), Year of construction: 2020, Hebrock drying box for edge banding machine Year 2020 Top condition - as new Location: ex stock 54634 Bitburg Rsdpfx Ajwqx Emsb Roch - immediately available -

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Rcsdpfxoxp H S As Ab Rjh Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Redped I T Exsfx Ab Rjch Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: used, Year of construction: 2004, operating hours: 25,000 h, functionality: fully functional, input voltage: 400 V, total length: 5,000 mm, total width: 1,200 mm, total height: 1,200 mm, input current: 30 A, conveyor belt width: 1,000 mm, power: 20.2 kW (27.46 HP), Used drying tunnel for heat fixation, suitable for applications such as screen printing, DTG, and DTF, year of manufacture 2004, with the following specifications: Belt width: 1000 mm, total length: 5000 mm, IR hood length: 2 x 2000 mm, infeed: 700 mm, outfeed: 300 mm, 400V, 50Hz, 20.2kW. The drying and curing tunnel is equipped with infrared ceramic emitters. The unit operates via a 32-amp connection. Rcjdpfx Aoxpgnkjb Reh Condition is age-appropriate, with visible signs of use. However, the system runs smoothly and reliably. All functions are operational, and the unit was in use until recently. Inspection is possible at any time by appointment. Dismantling and transport of the drying tunnel must be organized by the buyer.

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 32 units available Redpfjxpilxex Ab Rech For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: good (used), Heraeus Thermo UT 6200 Drying Oven For sale is a used laboratory heating oven from the renowned brand Thermo – type UT 6200, made in Germany. Technical details: Model: UT 6200 Order number: 51001655 Factory number: 8907974 Max. temperature: 300°C Supply voltage: 230V Frequency: 50Hz Power consumption: 2.60kW Current consumption: 11.8A Protection class: Class 3.1 Protection type: IP 20 Temperature protection: DIN 12880/1 Condition: Used, fully functional. Slight signs of wear on the outside (see pictures). Rsdoxlrzzopfx Ab Roch You can find other items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 5-70523, total length: 156,000 mm, total width: 31,600 mm, year of last overhaul: 2025, input current: 64 A, conveyor belt width: 1,600 mm, height adjustment type: hydraulic, product height (max.): 4 mm, input frequency: 50 Hz, working width: 22,000 mm, The Svecia screen printing machine with UV curing is perfectly suited for medium to high print runs. It delivers excellent quality on a wide variety of materials, including plastics, glass, metal, and paper up to 4 mm thick. The machine has been electrically tested and is in perfect working order. See the test certificate in the image. The UV curing section features a new Thieme conveyor belt. All specifications and requirements can be found in the images. Rcsdpfxjxrglus Ab Roh

Condition: new, Year of construction: 2025, Screen Printing Drying Rack - 50 Grids, L x W = 70 cm x 100 cm. Outer size 110 cm x 83 cm x 148 cm. Price : 1890€ - Delivery no included The screen printing or flatbed printing drying rack, a space-saving and really useful piece of equipment for printing professionals. Designed to meet the needs of screen printing and offset printing workshops. Main features 50 grid drying racks, 70 cm x 100 cm. Dimensions movable screen drying rack: 70 cm x 100 cm, perfectly suited to a wide variety of flatbed printing media. 50 grids or layer for flatbed drying to dry a large volume of visuals. Rjdpoxqx Tbsfx Ab Rsch Outer size : 110 cm x 83 cm x 148 cm Robust drying trolley on wheels, offering optimum mobility and flexibility in your workshop.

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Rcsdpoh Tyw Ajfx Ab Roh Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover.

Condition: used, New: Yes Part suitable for: trucks Zeer grote microvezeldoek 60 x 90 cm Rcodexhv Dxjpfx Ab Rsh Article nr.: BPB570-veiling Microfibre Drying towel XXL 60x90cm

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Rcedpjh Tymrsfx Ab Roh Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.