Used Tool Room Lathe for sale (41,010)

Condition: good (used), Year of construction: 1976, Deckel FP1 tool milling machine, fixed angular table, SK 40 spindle taper. Spindle brake, accessories: counter-support, various collets. In good, operational condition. Test under power possible by arrangement. Bledpfx Afjxw T Efsler

Condition: used, Year of construction: 1999, automatic feed in all axes ACU-RITE 3-axis position display hydraulic tool clamping coolant system workplace lighting year of manufacture 1999 Specifications Working area: - Horizontal longitudinal movement of the table (axis X): 600 mm - Horizontal transverse movement of the milling head (axis Y): 400 mm - Vertical movement of the table (axis Z): 400 mm Clamping surface of the vertical table: - Length x height: 500 x 320 mm - Number/distance/size of T-slots: 5 / 50 mm / 14H8 Fixed clamping surface of the angle table: - Length x width: 800 x 400 mm - Number/distance/width of T-slots: 8 / 50 mm / 14H8 Feed and rapid traverse: - Motor power/speed: 1.5 kW / 940 rpm - Feed levels: 18 - Feed range of X and Y axes: 16 - 800 mm/min - Feed range of Z axes: 8 - 400 mm/min - Rapid traverse of X and Y axes: 2000 mm/min - Rapid traverse of Z axes: 1000 mm/min - Maximum feed force of X and Y axes: 8 + 4 kN - Maximum feed force of Z axes: 10 + 5 kN Drive and speed of horizontal spindle: - Motor power/speed: 4 kW / 1400 rpm - Speed levels: 18 - Speed range: 63 - 3150 rpm - Maximum permissible torque on the spindle clamp: 500 Nm - Tapered bore in the spindle: SK40 Hydraulic unit: - Operating pressure of tool clamping circuit: 10 MPa - Pump motor power/speed: 0.55 kW / 1395 rpm - Tank capacity: 15 l - Pump flow rate: 2.3 l/min Cooling device: - Pump motor power: 0.09 kW - Pump operating pressure: 0.04 MPa - Maximum amount of liquid pumped by the pump: 25 l/min Blsdpfxjvtzkxo Aflor - Maximum amount of liquid at the outlet: 7 l/min - Tank capacity: 40 l Required power supply: - Operating voltage/frequency: 3x 400V / 50 Hz - Power consumption: 8.0 kW - Nominal fuse rating (user-side): 20 A - Control voltage: 24 V Machine dimensions: - Dimensions WxHxD: 1975 x 1910 x 1810 mm - Machine weight including angle table and vertical milling head: 2200 kg

Condition: repair required (used), Year of construction: 1980, Tool milling machine MAHO 800 P with milling head and quill feed. In need of repair. Suitable for spare parts usage. Parts can also be sold individually. Bledpfoxz D T Ujx Aflor

Condition: not inspected (used), functionality: unexamined, overall weight: 200 kg, grinding wheel diameter: 100 mm, table length: 330 mm, table width: 110 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to the closure of the business. Placing a bid obliges the bidder to collect the machine within the specified period from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Table dimensions: 330 x 110 mm Grinding wheel diameter: 100 mm Bjdpfxoxqnuhj Aflolr MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 650 x 1,500 mm Weight: 200 kg

Condition: used, x-travel 600 mm y-travel 210 mm z-travel 425 mm table-size 950 x 230 mm turning speed range 31,5 - 1250 U/min power requirement 1,5 kW tool adaptor ISO 40 | feed speeds 4- 250 mm/min | weight 1,1 t range L-W-H 1,8 x 1,5 x 1,63 m Universal tool room machine - turn- and swiveling v- head . h- spindle - automatic feed - hand wheels Blsdpfx Afolug Unolsr - coolant system - machine light - 16 gear steps

Condition: good (used), functionality: fully functional, X = 400 mm, Y = 300 mm Infinitely variable feed rates, Speeds stepped from 35 to 2200 rpm Spindle mount ISO 40 • Milling head with boring quill • Universal rotary and tilting table Bjdpfxjxwc D De Aflslr

Condition: good (used), Year of construction: 1985, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 3 active axes, rigid table, SK 40 M16 spindle taper. Central lubrication, operating manuals included. Good operational condition, comes from a vocational training center. Can be demonstrated under power by arrangement. Bedpjxwunzjfx Afljlr

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Tool Room Milling Machine - Universal HERMLE - UWF 900 E Bljdpfjtqmm Asx Aflor - Spindle-Head swivable +/- 90°

Condition: new, Year of construction: 2026, 420 mm 220 mm 380 mm Blodpfx Afsxfb H Tjler 840x390 mm 950x250 mm 65-2600 U/min DIN 2080 ISO 40

Condition: not inspected (used), functionality: unexamined, overall weight: 700 kg, total length: 1,000 mm, total width: 900 mm, total height: 1,600 mm, spindle speed (max.): 1,900 rpm, machine/vehicle number: 50025, No minimum price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business closure. Placing a bid obligates you to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 19 – 1,900 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,000 x 900 x 1,600 mm Weight: 700 kg Bedpfsxqmpdjx Aflelr

Condition: new, Year of construction: 2024, functionality: fully functional, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 12 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Fixed angle table: - Dimensions of the work surface: 845 x 390 mm - T-slots: number / width x distance: 5 pcs. / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 950 x 250 mm - T-slots: number / width x distance: 3 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 420 mm - Transverse (Y): 220 mm - Vertical (Z): 380 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 65 - 2,600 rpm. - Number of spindle speeds: 12 (65 – 100 – 130 – 175 – 260 – 357 – 485 - 690 – 950 – 1,325 – 1,870 – 2,600) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 90 - 470 mm - Distance spindle center to column - min./max.: 120 - 340 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 12 - Speed range: 65 - 2,600 rpm. - Distance spindle center / table: 100 - 480 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 1,000 mm/min. - Rapid traverse (X,Y,Z axes): 1,000 mm/min. Motors: - Main drive power: 2.2 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Bodpfx Afevt Tn Aslslr Dimensions and weight - Dimensions (W x D x H): 1,621 x 1,527 x 1,938 mm - Weight: 1,300 kg

Condition: good (used), Lathe spinning tool, roller block, support roller -Support roller: solid design -Roll: Ø 145 mm Bedowvfwgepfx Afljlr -Square: 73 x 26 mm, clamping length 180 mm -Number: 2x roller block available -Dimensions: 350/145/85 mm -Weight: 8.4 kg/piece

Condition: good (used), Year of construction: 1980, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Bljdpfjumcmqex Afljr

Condition: used, Year of construction: 1982, x-travel 390 mm y-travel 330 mm z-travel 380 mm control konventionell table surface area 850 x 255 mm max. table load 200 kg number of T-slots 5x T-slot - width 12 mm H8 T-slot - distance 45 mm turning speed range - milling 63 - 2.800 U/min transmission ratio 12 pos. feed 0 - 1.500 mm/min tool taper SK 40 rapid traverse 1.500 mm/min weight of the machine ca. 1,9 t dimensions of the machine ca. 2,0 x 2,5 x 2,8 m Tool Room Milling Machine Universal HECKLER & KOCH - AM 442 Bodow Spbgjpfx Aflelr

Condition: new, Year of construction: 2025, 600 mm 500 mm Bjdpowp Tqbefx Aflelr 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: excellent (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: 1803007, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, mount diameter: 40 mm, total height: 2,000 mm, total width: 1,300 mm, total length: 2,100 mm, table width: 400 mm, table length: 800 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 1,500 kg, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, Connected load: 3 kW Bodpfxowdn Ane Aflolr EQUIPMENT: Three-axis digital display (SINO)

Condition: new, Year of construction: 2024, - FAGOR 3-axis position indicator, Mod.: 400iB INNOVA - Milling head +- 90° manually swiveling - Manual tool clamping using M 16 tightening screw for vertical and horizontal spindle - Swiveling control panel - Motor for horizontal and vertical spindle - Feed motors with inverter for X/Y/Z axis - Ball screw spindles in the X/Y/Z axes - Gearbox for 18 spindle speeds - Counterholder with support bearing - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Spindle protection with safety switch - Splash protection on the 3 sides of the horizontal table - LED work light - Automatic lubrication for X/Y/Z guides - Mechanical handwheels for X/Y/Z axes - Coolant system - Cover for X/Z axes - Operating tool - Technical Documentation - CE version Colors: - RAL 7024 – graphite gray - RAL 7035 – light gray Technical data: Blsdpfovunrfjx Aflsr Fixed angle table: - Dimensions of the work surface: 1,000 x 540 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm - Max. table load: 300 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 8 pcs. / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Vertical milling head: - Tool holder: ISO 40 / DIN 2080 - Speed range: 40 - 3,200 rpm. - Number of spindle speeds: 18 (40 - 65 – 83 – 100 - 130 – 160 – 200 – 250 - 400 - 330 520 – 650 – 820 – 1,020 – 1,280 – 1,600 – 2,000 – 3,200) - Quill stroke, manual: 100 mm - Head swivel: +- 90° - Distance spindle nose/table: 70 - 470 mm - Distance spindle center to column - min./max.: 160 / 660 mm Horizontal spindle: - Tool holder: ISO 40 / DIN 2080 - Gear stages: 18 - Speed range: 40 - 3,200 rpm. - Distance from spindle center / to 2nd T-slot: 95 - 495 mm - Distance from spindle center / to 3rd T-slot: 180 - 580 mm Feeds: - Control: stepless - Range (X,Y,Z): 0 - 600 mm/min. - Rapid traverse (X,Y,Z axes): 600 mm/min. Motors: - Main drive power: 3.75 kW - Feed motor power (X-Y-Z): 0.35 kW - Coolant pump: 0.09 kW Dimensions and weight - Dimensions (W x D x H): 1,881 x 1,813 x 1,916 mm - Weight: 1,600 kg

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 450 mm turning speeds 31,5 - 1600 U/min tool taper SK 40 quill stroke vertical 80 mm diameter of quill 80 mm Bodpfx Afovlakujljlr table: 1000 x 850 mm total power requirement 4,0 kW weight of the machine ca. 2,6 t dimensions 2,1 x 1,7 x 1,7 m Universal tool milling machines - Digital display - Angle table - Coolant system - Machine feet

Condition: good (used), Year of construction: 1973, Deckel FP2 tool milling machine with 2-axis Heidenhain digital readout, rigid table, SK 40 spindle holder. Long sliding milling head, accessories: various collets and milling arbors, counter holder. Good working condition, can be demonstrated under power by arrangement. Blsdjumclaspfx Aflor

Condition: used, Year of construction: 2006, x-travel 600 mm y-travel 270 mm z-travel 430 mm 630 mm table-size 1120 x 270 mm spindle turning speed range 45 - 1660 U/min spindle taper SK 40 control konventionell spindle motor 2,2 kW Bjdpfxjv Sdz Rs Aflelr total power requirement 2,4 KVA weight of the machine ca. 1,35 t dimensions 1,8 x 1,4 x 1,8 m Machine equipped with: - Digital display - Machine light - Coolant system - Machine feet

Year of construction: 1976, condition: good (used), Deckel FP1 tool milling machine, 3-axis Heidenhain digital readout, machine was overhauled by FPS years ago. Rigid table, SK 40 spindle holder vertical, SK 40 horizontal, accessories: various collets and milling arbors, counter holder, good working condition, paint is no longer so nice, can be demonstrated under power by arrangement. Bjdpfjrhzcusx Aflelr

Condition: new, x-travel 300 mm y-travel 200 mm z-travel 350 mm table-size 700 x 200 mm spindle taper ISO 40 turning speed range - horizontal 150 - 1660 U/min turning speed range - vertical 110 - 1230 U/min Bedsfrzunspfx Aflolr quill stroke 120 mm spindle drive 3,0 kW weight of the machine ca. 1,15 t dimensions of the machine ca. 1,31 x 1,38 x 1,65 m

Year of construction: 1974, condition: like new (used), As good as new Deckel FP1 tool milling machine overhauled by FPS with 3-axis Heidenhain digital readout , Adjustable angle table , SK 40 spindle mount. Spindle brake , accessories : Counter holder , various collets. Very good working condition, can be demonstrated under power by arrangement. Blodpsq A Icqjfx Afljr

Condition: new, x-travel 1000 mm y-travel 300 mm z-travel 400 mm table-size 1320 x 360 mm spindle taper ISO 40 spindle turning speed range 58 - 1800 U/min Bedpfxeulbcno Aflolr total power requirement 4 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,1 x 2,1 x 1,95 m

Condition: used, Year of construction: 1988, x-travel 750 mm y-travel 240 mm z-travel 420 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 40 - 1800 U/min total power requirement 4,0 kW weight of the machine ca. 1,4 t dimensions 1,75 x 1,65 x 1,9 m Bodpfx Afowz Runelolr Universal milling machine - Digital display - Horizontal clamps (2 pcs) - Huron head - Horizontal spindle - Coolant system - Machine feet