Used Torque Wrench-3 4 Inch for sale (93,671)

Condition: used, Univ. NC Tool Milling Machine KUNZMANN Type WF 3/4 Machine No. 341020 Year of Manufacture 1998 Travel X: 400 mm Y: 320 mm Z: 400 mm Table Size 650 x 350 mm Spindle Taper SK 40 Spindle Speed 40 - 2500 rpm Feeds X, Y and Z axes 0 - 1000 mm/min, stepless Rapid Traverse X, Y axis 4000 mm/min Rapid Traverse Z axis 3000 mm/min Pinol Adjustment Vertical 60 mm Drive Power Spindle Motor 3 kW Mains Connection 400 Volt, 50 Hz - NC path control Heidenhain TNC 124 - Stepless spindle speed control via belt drive with electric variable speed adjustment, spindle speed programmable - Reduction gearbox with 2 gear stages for two speed ranges - Main motor with belt drive via variable gearbox and stepless control via electronic system - Vertical milling head swiveling +/- 90° - Hydraulic tool clamping - Fixed angle table - All 3 axes with ball screw and mechanical handwheels - Control cabinet fixed to the machine Ndsdslvyrbjpfx Ah Sjc - Coolant tank with pump located beside the machine - Central lubrication - Lighting Space Requirement L x W x H 1800 x 1800 x 1900 mm Weight 1300 kg Good condition

Condition: used, Year of construction: 2016, loading space width: 2,300 mm, loading space length: 5,700 mm, loading space height: 1,750 mm, Refrigeration structure: Deep freezer, 4 doors on the left, number of doors on the right 4 doors, 2 doors at the rear, partition wall can be folded and moved. Refrigeration unit: Multi-Temp with 2 evaporators, compressor/electricity drive, cooling down to -33 °C °C ID: 117992 4 pieces stock 3 temp/chambers ThermoKing -0°C -to -33°C Bj16 Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The solidification point of the eutectic solution is -33 °C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used refrigeration and ice cooling vehicles in stock. You can find more of our offer under Non-binding offer, sale only to traders, errors and prior sale reserved. Advertisements and company logos on vehicles may have been digitally edited on photos. Ndodpfxev S Ntfo Ah Sec

Condition: used, Candles: 08 Ndsdpoz N Etqjfx Ah Ssc cartridge type: code 41 with fin end, 3 locking tab ext 222 O-ring

Condition: used, functionality: fully functional, machine/vehicle number: 14933, Year of construction: 2021, operating hours: 2,136 h, load capacity: 2,000 kg, lifting height: 3,340 mm, fuel type: electric, mast type: duplex, construction height: 2,140 mm, empty load weight: 3,289 kg, total length: 2,145 mm, drive type: Elektro, construction width: 1,000 mm, Electric 4-wheel forklift Chassis number: 14933 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 48V Battery Ah: 630Ah Battery manufacturer: Hawker Battery type: PzS Battery year of manufacture: 2021 Battery condition: 60 - 80% Description: German: Toyota 8FBM20T No.: not specified Year of manufacture: 2021 Operating hours: 2,136 Lifting capacity: 2,000 kg Lifting height: 3,340 mm Overall height: 2,140 mm Mast: Duplex Battery: 48 V / 630 Ah, year 2021, manufactured by Hawker The visible II 3D marking generally corresponds to ATEX device category 3 for potentially explosive dust atmospheres Battery condition: 60–80 % Equipment: Side shift and third and fourth hydraulic valve. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Toyota 8FBM20T No.: not specified Year of manufacture: 2021 Operating hours: 2,136 Lifting capacity: 2,000 kg Lifting height: 3,340 mm Overall height: 2,140 mm Mast: Duplex Battery: 48 V / 630 Ah, year 2021, manufactured by Hawker Battery condition: 60–80% Equipment: Side shift and third and fourth hydraulic valve. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, 3rd valve, 4th valve, Explosion-proof, Rotating beacon Ndodpszp Smlefx Ah Ssc

Condition: used, mileage: 323,926 km, power: 162 kW (220.26 HP), first registration: 02/1996, fuel type: diesel, overall weight: 10,600 kg, color: silver, gearing type: mechanical, number of seats: 3, MAN 2000, suitable for 3-4 horses, with living area, shower Accommodates 3-4 horses, side ramp, video surveillance, pass-through, living area, shower, toilet. TOW HITCH, and more. Errors, typos, and prior sale excepted. Location and viewing of our vehicles: Nodpfo Adm Hgjx Ah Sedc STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse transporters and trailers. Please arrange an appointment in advance with Richard Theurer or Andreas Theurer.

Condition: used, functionality: fully functional, machine/vehicle number: H2X387J00413, Year of construction: 2018, operating hours: 4,417 h, load capacity: 3,500 kg, lifting height: 3,460 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,450 mm, empty load weight: 6,300 kg, total length: 2,600 mm, drive type: Elektro, construction width: 1,300 mm, Electric 4-wheel forklift Chassis number: H2X387J00413 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire condition: New Rear tire condition: New Battery voltage: 80V Description: For sale is a Linde E35L-01 electric 4-wheel forklift with extension forks and a container-compatible overall height. The forklift is ready for use and fully functional. The visual and technical condition are good. Vehicle data: Year of manufacture: 2018 Operating hours: 4 h Load capacity: 3,500 kg Mast type: Duplex Lifting height: 3,460 mm Overall height: 2,450 mm Free lift: 1,500 mm Extension forks: 1,200–2,000 mm Battery voltage: 80 V Front and rear tires: new Chassis number: H2X387J00413 Internal number: R0793 The unit is immediately available. A charger can be ordered upon request. Fast and uncomplicated transport is possible by arrangement. Errors and prior sales excepted. Sale is made excluding any warranty or guarantee. Side shift, fork positioner, Ndedpezkwuwefx Ah Ssc Extension forks 1200-2000 mm 3rd valve, 4th valve

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01800, Year of construction: 2020, operating hours: 1,829 h, load capacity: 2,000 kg, lifting height: 5,070 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Chassis number: H2X386X01800 Ndjdpozcrv Uofx Ah Ssc Load center: 500 Mast type: Triplex Condition: Like new Technical condition: very good Description: Linde E20PH-02 electric forklift. Manufacturer: Linde. Model: E20PH-02. Year of manufacture: 2020. Operating hours: 1,829 h. Load capacity: 2,000 kg. Drive: Electric 48 V. Equipment: Triplex mast, overall height 2,300 mm, fork positioner, side shift, work lights, solid tires. The Linde E20PH-02 is in very good condition and impresses with its compact design and excellent Linde driving performance. Thanks to the triplex mast, fork positioner and side shift, the machine is ideal for demanding storage and logistics tasks. The low overall height of only 2,300 mm allows it to be used even in halls with limited headroom. The charger can be ordered separately upon request. Inspection and test drive possible by appointment. Linde E20PH-02 Electric Forklift Manufacturer: Linde Model: E20PH-02 Year of manufacture: 2020 Operating hours: 1,829 h Capacity: 2,000 kg Drive: 48 V Electric Equipment: Triplex mast Overall height 2,300 mm Fork positioner Side shift Working lights Solid tires This Linde E20PH-02 is in very good condition and offers the well-known Linde driving comfort and productivity. Equipped with a triplex mast, fork positioner and side shift, the truck is perfectly suited for warehouse and logistics applications. The low overall height of only 2,300 mm allows operation in buildings with restricted access heights. A charger can be supplied on request. Viewing and test drive possible by appointment. Side shift, fork positioner, 4th valve, partial cabin

Condition: used, functionality: fully functional, machine/vehicle number: H2X388V01019, Year of construction: 2019, operating hours: 1,894 h, load capacity: 5,000 kg, lifting height: 4,160 mm, fuel type: electric, mast type: duplex, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X388V01019 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid rubber Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 20 - 40% Battery voltage: 80V Battery Ah: 840Ah Battery manufacturer: EH Batterien AG Battery type: PzS Battery year of manufacture: 2019 Ndsdpfx Aozzr Iyeh Sjc Battery condition: 80 - 100% Description: German: Linde E50HL-01 No.: R0822 Year of manufacture: 2019 Operating hours: 1,894 Lifting capacity: 5,000 kg Lifting height: 4,160 mm Mast: Duplex Battery: 80 V / 840 Ah, year 2019, manufactured by EH Batterien AG Battery condition: 80–100 % Equipment: Side shift, fork positioner and third and fourth hydraulic valve. Condition note: Rear window is cracked. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Linde E50HL-01 No.: R0822 Year of manufacture: 2019 Operating hours: 1,894 Lifting capacity: 5,000 kg Lifting height: 4,160 mm Mast: Duplex Battery: 80 V / 840 Ah, year 2019, manufactured by EH Batterien AG Battery condition: 80–100% Equipment: Side shift, fork positioner and third and fourth hydraulic valve. Condition note: Rear window is cracked. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shift, fork positioner, 3rd valve, 4th valve, front work light, windshield wiper.

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, RAL 7035 light gray / RAL 3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with test report Accessories: Nsdpshikrrofx Ah Ssdc - HEIDENHAIN TNC 124 linear control system - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as is -

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, controller manufacturer: HEIDENHAIN, controller model: TNC 124, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 2001. It features a vertical spindle with a swiveling head, CNC-controlled X, Y, and Z axes, and a spindle taper of SK40. The spindle speed ranges from 0 to 4,000 rpm with rapid traverse rates up to 1,000 mm/min on all axes. Consider the opportunity to buy this KUNZMANN WF 4/3 universal machining centre. Contact us for more information about this machine. • Swivel head: ±90° • Spindle & drives (INDRAMAT): • Main spindle motor: 2AD104C-B050A1-CS06-A2N1 • Spindle taper: SK40 • Spindle bore: 22 mm • Quill diameter: 90 mm • Quill stroke: 60 mm Njdsya D Svopfx Ah Ssdc • Axis drives: • X / Y / Z motor type: MKD071B-061-GG1-KN • Speed & feed: • Spindle speeds: • Range I: 0–1,000 rpm (stepped) • Range II: 1,001–4,000 rpm (stepless) • Rapid traverse: • X-axis: up to 1,000 mm/min • Y-axis: up to 1,000 mm/min • Z-axis: up to 1,000 mm/min • Feed force (X/Y/Z): approx. 4 kN • Electrical & control (INDRAMAT): • Power supply modules: • Net filter: NFD03.1-480-030 • Capacitor module: CZM01.3-02-07 • Controllers: • Spindle controller: DKC11.3-100-7-FW • Axis controller: DKC01.3-040-7-FW • Firmware versions: • Spindle: ESM 2.1-SMT-02V • Axes: ESM 2.1-SMT-02V Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, table width: 350 mm, table length: 650 mm, table load: 250 kg, spindle speed (max.): 2,500 rpm, number of axes: 3, This 3-axis KUNZMANN WF 4/3 was manufactured in 1998. It features a travel of 400 mm in the X, Y, and Z axes, with a table size of 650 x 350 mm and a maximum table load of 250 kg. The spindle speed reaches up to 2,500 rpm, providing efficient machining capabilities. If you are looking to get high-quality vertical machining capabilities, consider the KUNZMANN WF 4/3 vertical machining centre we have for sale. Contact us for further details. • Travel X: 400 mm Nsdjzwxlwspfx Ah Sedc • Travel Y: 350 mm • Travel Z: 400 mm • Table Length: 650 mm • Table Width: 350 mm • Table Load: 250 kg • Spindle Speed: 2,500 rpm • Tool Holder: SK40 • Feed Rate: 2,000 mm/min • Rapid Traverse: 5,000 mm/min Technical Specification Taper Size SK 40

Condition: used, mileage: 1,001 km, first registration: 01/2012, color: silver, driver cabin: other, gearing type: other, loading space length: 6,200 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2012, Vehicle location: Bovenden, steel body. Body: Tipper bridge for a 4-axle chassis, WITHOUT FRAME AND HYDRAULIC SUPPORTS! Like-new condition of a D-Benz Arocs (demonstration vehicle). Auxiliary frame and hydraulic supports available for an additional charge of 4,500 EUR. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors. Nedpfei Rlgxox Ah Sjdc

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Ndedpe Adzwyjfx Ah Sec Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, maximum load weight: 3,400 kg, overall weight: 7,500 kg, axle configuration: 2 axles, first registration: 12/2024, Equipment: ABS, TT XL horse trailer GG:7.500KG 3-4 horses, aluminum floor, 2 sleeping berths, fully equipped apartment, seating group, with shower, refrigerator, air conditioning, micro, washbasin, WC, side window. Diesel heater, rear ramp. * NET SALE POSSIBLE. * TOP leasing offer possible. Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Njdevchtxopfx Ah Sodc Sales and service of all makes in the field of horse transporters and trailers. Please make an appointment in advance. under Richard Theurer Andreas Theurer

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head -for pipe size: max. 2" inch -5x Cutting tips: 3/4" 1" 1 1/4" 1 1/2" 2" inch -2x Threaded ratchets: Type 111-R/12-R -Price/Sale: complete -Weight: 12.8 kg Ndedoc T Nx Ijpfx Ah Sjc

Condition: good (used), Year of construction: 2018, Vehicle description Diesel forklift HYUNDAI 50DA-9 Year 2018 acc. Counter 19.360 hours 5 tons lifting capacity 4.90 meters lifting height 2.48 meters Overall height 75 KW Cummins Euro 5 engine - Triplex free lift mast - 3rd and 4th circle to fork carriage - Cabin with heating (one door) - lighting system Ndodpfx Ahjr I Adze Sec - ready for immediate use - Original paint - Service maintained machine Selling price: 13.500,-- net also favorable delivery possible!

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Ndsdpfx Ahoz Snp Sj Soc Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE inverter, complete with a power module. Visual condition as shown in the photos. Technical data: Control unit: Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00 P/N: 08279691 Control unit P/N: 08243492 SO#: 01.1304473308.0001.09 Control unit SO#: 0189307 Protection class: IP00 Country of manufacture: Germany (Made in Germany) Power module: Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0591425 Input power supply: 3×380–500 V AC ±10% 50–60 Hz ±5% 94.5 A AC (400 V) Operating temperature: 0…40°C Protection class: IP10 Output: 3×0 V 0–180 Hz Nodpez Snp Hjfx Ah Sjdc 105 A AC (400 V) 73.5 kVA Lastart: M Installed communication modules: DFP21B DEH11B Additional markings: SEW Werk Wien service sticker: Rep. No.: 12424 Repair: 12/2011 Final inspection: 42/2011 Weight: 32.75 kg Condition: Visually in good condition. The housing has a crack (visible in the photos). Normal signs of use, minor scratches, and scuffs are visible. Sold exactly as shown in the photos.

Condition: used, Torque wrench, torque tool -Manufacturer: GEDORE, torque wrench type TORCOFIX -Z 40-200 Nm Ndjdpfx Ahsq Davfs Soc .: 4420-01 -Torque: 40 - 200 Nm / 30 - 150 lbf-ft -Holder: pin holder Ø 16 mm -Transport dimensions: 560/60/H60 mm -Weight: 1.3 kg

Condition: used, mileage: 618,325 km, power: 375 kW (509.86 HP), first registration: 11/2015, fuel type: diesel, fuel: diesel, emission class: euro6, Year of construction: 2015, Unladen weight: 11,800 kg Njdpfxsy H Uwke Ah Sodc

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. If interested, we will also be happy to inform you about other machines in our inventory. You are welcome to inspect the machine at our premises by prior appointment. Nsdpfsxbzgxex Ah Sjdc

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 82 h, load capacity: 4,000 kg, lifting height: 3,370 mm, fuel type: electric, mast type: simplex, construction height: 2,320 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Technical condition: Very good Battery year: 2012 Nsdjuhxk Hjpfx Ah Ssdc Description: Toyota FBMF40 M0442 Year of manufacture: 2011 Operating hours: 82 The unit is in visually very good and technically also very good condition. Charger available on request. Errors and prior sale excepted. If you have not found your forklift, please contact us. We have a large selection of other units on site. WITHOUT ATTACHMENT 3rd valve, 4th valve,

Condition: used, maximum load weight: 19,680 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2009, Year of construction: 2009, Equipment: ABS, Manufacturer Eurotank Model 3 axle ET-26-4 ADR 25.500 L 4 rum Year 2009 Condition Good Serial Number YF908S16S95049774 Ref. nr. 7832 Reg. date: 30.06.2009 Ndedpswlydysfx Ah Sec Disc brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 385 / 55R22,5 Cover% left 20%-40% -40% Toolbox: ? Total weight: 24000 Kg Net weight: 4320 Kg Load capacity 19680 Kg Tank: 25500 L Compartments: 4 (10000 L + 5000 L + 5000 L + 5000 L)

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric Ndodpfx Aoub R R Ssh Sec - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: used, empty load weight: 4,140 kg, maximum load weight: 19,860 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 06/2027, loading space length: 5,800 mm, total length: 2,550 mm, total width: 4,000 mm, total height: 7,200 mm, suspension: air, tire size: 265/70R19,5, wheelbase: 3,850 mm, Equipment: ABS, compressed air brake, | Gsodam 3-axle timber trailer | Year of manufacture: 2012 | 2-axle, liftable | 4 pairs of stakes | Loading platform length: approx. 5.80 m | Tare weight: 4,140 kg | Payload: 19,860 kg | Gross vehicle weight: 24,000 kg | BPW axle with drum brakes | Austrian vehicle | Errors, typos and prior sale excepted. Ndedpfxj Ab Tivj Ah Sec