Used Torque Wrench-3 4 Inch for sale (94,551)

Condition: used, operating hours: 1,216 h, mileage: 8,947 km, power: 75 kW (101.97 HP), first registration: 07/2020, overall weight: 5,350 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,150 kg, empty load weight: 4,200 kg, wheelbase: 1,900 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, maximum speed: 50 km/h, Equipment: ABS, air conditioning, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, * German vehicle * Documentation and inspection books available * Only 8,947 km original mileage * ONLY 1,216 total operating hours * Condition as shown in photos * DULEVO 2000 * 4 x 4 all-wheel drive * Switchable all-wheel steering * 3-disc brush system at the front, 800 mm wide * Sweeping width: 1,800 mm to 3,000 mm, up to 3,400 mm with third brush * High-pressure cleaner with hose and high-pressure lance at rear * Pre-spray system * Spraying width: 1,120 mm * Debris hopper: 2.38 m³ * Fresh water tank: 463 liters * Hydraulic high-tip emptying, tiltable up to 45° * Ideal for pedestrian, foot, and cycle paths, narrow alleys, etc. * 2-person full comfort cab * Air conditioning * EasyDrive (hydrostatic drive) (SN) * VM 4-cylinder diesel engine * Power: 75 kW / 102 HP * 40 km/h road approval * Heated tinted panoramic windshield * Comfort suspension seats * Rear view camera * Ergonomic arrangement of all controls * Central lubrication system * Rotating warning beacons * Wheelbase: 1,900 mm * GVW: 5,350 kg * Unladen weight: 4,200 kg * Self-propelled road sweeper If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You will find additional trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and evaluation of the goods, so that the buyer does not have any misconception about the condition and suitability. Viewing and testing are possible at any time by prior arrangement and are expressly desired. Dsdpfjw Emh Sex Abuscc All information provided without guarantee. We accept no liability for mistakes or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Year of construction: 2010, condition: used, Year of manufacture: Nov 2010 New: No Dsdpfx Asxvbaujbuecc GEBRUIKTE TRAILER BANDEN 425/65 R 22.5 8 MM 150 EURO 6 MM 125 EUR 4/3 MM 100 URO INCL VELG.

Condition: used, mileage: 358,000 km, power: 115 kW (156.36 HP), first registration: 08/2014, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: diesel, brakes: engine braking, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 7,920 mm, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2014, Equipment: ABS, central locking, cruise control, electric window regulation, power mirror, tail-lift, traction control, Front axle: Max. axle load: 3400 kg; Tyre profile left: 90%; Tyre profile right: 90%; Suspension: leaf suspension Rear axle: Double wheels; Max. axle load: 4600 kg; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50%; Suspension: air suspension Number of cylinders: 4 Engine capacity: 5.132 cc Dedpox Ux R Refx Abuscc Empty weight: 5.712 kg Carrying capacity: 1.778 kg GVW: 7.490 kg APK (MOT): New APK (MOT) upon delivery Registration number: 83-BFD-2

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head Dodpfxsc Txars Abuscc -for pipe size: max. 1 1/4" inch -4x cutting tips: 1/2" 3/4" 1" 1 1/4" inch -Number: 1 set available - Price: per set -Dimensions: -Weight: 6.6 kg

Condition: good (used), mileage: 999,999 km, power: 375 kW (509.86 HP), first registration: 02/2011, fuel type: diesel, tire size: 385/65, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, brakes: retarder, gearing type: mechanical, number of gears: 16, emission class: euro5, total length: 9,600 mm, total width: 2,550 mm, Year of construction: 2011, Equipment: differential lock, retarder, Berdex Type 2 Alcoa Stationary air conditioning Retarder 1790113 = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: Manual retarder, 16 gears, manual gearbox Axle Configuration Front axle: Tire size: 385/65; alloy rims; max. axle load: 9,000 kg; left tire tread: 65%; right tire tread: 65% Rear axle 1: Tire size: 315/70; twin tires; differential lock; alloy rims; max. axle load: 11,500 kg; left inner tire tread: 40%; left outer tire tread: 40%; right inner tire tread: 40%; right outer tire tread: 40% Rear axle 2: Tire size: 315/70; alloy rims; lift axle; max. axle load: 7,500 kg; left tire tread: 45%; right tire tread: 45% Weights Unladen weight: 13,790 kg Dcsdpfjx Tu Aasx Abuec Payload: 14,210 kg Gross vehicle weight: 28,000 kg Functional Body manufacturer: ZF Condition Technical condition: good Visual condition: good Further Information Contact Maarten Busser or Niels Busser for further information.

Condition: used, Year of construction: 2007, feed length X-axis: 400 mm, feed length Y-axis: 350 mm, feed length Z-axis: 400 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, quill travel distance: 60 mm, table load: 250 kg, Equipment: documentation/manual, Used universal milling and drilling machine Kunzmann WF 4/3 Heidenhain Position Control TNC 124 Dsdpfoya Hrlsx Abujcc Travel X/Y/Z = 400/350/400 mm Infinitely variable speed 1-4000 rpm Spindle SK40 DIN 69871 (Form AD) with drawbar according to DIN 69872 Horizontal and vertical spindle Fixed angle table 650 x 350 mm, 6 x 14 H7 T-slots Coolant system Electronic handwheel HEIDENHAIN HR 410 HEIDENHAIN KW130 probe system with cable Chip splash guard cabin, hydraulic tool clamping, central lubrication. Machine folder with operating manual and control user manual included. Further technical data available upon request. The machine is located at our facility in 71334 Waiblingen-Beinstein, is immediately available, and can be inspected by appointment. Please contact us in advance to arrange a visit.

Condition: good (used), Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve, directional control valve -Solenoid valve -Type: MOF H-3-1/4 -PN: 1.5-8 bar Price: per piece Dcedpfjb A It Tsx Abuec -Quantity: 2 available -Weight: 0.3 kg

Condition: reconditioned (used), functionality: fully functional, Technical data: • 4-station rotary table • Max. sealing area 350 x 250 • Max. blister depth 70 – 100 mm depending on product type • Sealing force 12,800 N • Sealing heater power 1.75 kW • Carton feeder • Package ejector • Carton forming unit • Cable with CEE 16A plug Dsdpfx Asfua Dcebuecc • Weight approx. 750 kg Machine available in all variants b, b-2, b-3, b-4.

Condition: used, Year of construction: 1996, material width 500 mm coil weight 2,5 t material thickness 0,2 - 3,0 mm coil internal diameter 480 - 530 mm coil external diameter 1300 mm material cross-cut 1000 mm² no. of straightening rolls 10 straightening roll diameter 80 mm number of draw-in rolls 2 roll diameter 120 mm speed 20 m/min power requirement 4,0 + 1,1 kW weight of straightening machine 2,3 t dimensions straightener (WxDxH) 1,4 x 2,2 x 2,0 mm weight of decoiler 0,95 t dimensions decoiler (WxDxH) 1,5 x 1,5 x 1,95 mm Straightening machine BRMS 4/500/10 Dsdpfovut Raox Abujcc with infinitely variable drive Decoiler BSH 3-500 with main motor for fix speed, ausiliary drive (declutchable), pneumatic snubber roll coil loop control via light guard can be offered without putting into operation or with putting into operation in given condition video at seller's site before dismantling available

Condition: used, Year of construction: 2015, operating hours: 3,479 h, 2015 | Kubota KX080-4 with 3 excavator buckets | Used Midi Excavator 7t - 12t | 3479 hours Dodpfox Uq Stsx Abuecc 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 67 inspection points 66 approved ✅ 1 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: General good condition of the excavator. Missing two mirrors on the rearview and right mirror. The rigid piping at the top of the right-hand boom is deformed due to an impact. Slight impact on the lower left front part of the cabin. Presence of engine oil in the engine compartment. Check the seal. The seat cover is damaged, but the seat is in perfect condition. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40207 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. Djdouh Rzqopfx Abuocc A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. The standard equipment in the ladies' area consists of three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Condition: good (used), Three-phase motor, electric motor Djdpjd Huiwofx Abuscc -Manufacturer: VEM, Electric motor type OKPF 3/4 -Power: 2.2 kW -Speed: 1425 rpm -Shaft: Ø 22 x 50 mm -Design: B5 -Protection class: IP 44 -Quantity: 1 available Price: per piece -Dimensions: 395/210/H235 mm -Weight: 26 kg

Condition: new, mileage: 1,154 km, power: 294 kW (399.73 HP), first registration: 01/2026, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,450 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = Dsdpfx Ajx R Ur Aebuecc - Front refrigerator - Retarder - Toilet - USB connections - Webasto heater = Further Information = Damages: none = Company Information = We are an international company based in Belgium, near Brussels (approximately 20 km away). Belgian Bus Sales is your ideal partner for the purchase and sale of used buses, featuring a large parking facility serving as a showroom. We always have numerous buses of all brands, capacities, models, and price ranges in stock. We can help you find the right tourist, school, or service bus to meet your requirements and budget. All information provided without guarantee. Errors, prior sale, and typographical mistakes excepted. Opening hours for used bus inspections: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Agata). We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: used, Vacuum with pump and 3 suction platesused, good conditionmake Schmalztype PVT-3-SPL-300x100-VE SEG 4vacuum generator ejector SEGoperating pressure 5 barload capacity approx. 90 kgadjustablewith vacuum pump pneumaticsuction plates 3 piecessize 300 mm x 100 mmswivelingspace requirement approx. 1200 mm x 600 mm x 900 mmstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Dedpfxovwf D Rs Abuocc

Condition: new, mileage: 1,155 km, power: 294 kW (399.73 HP), first registration: 01/2026, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = - Front refrigerator - Retarder - Toilet - Webasto auxiliary heater Dcjdpfxox R Uihs Abuoc = Further Information = Damage: None = Company Information = We are an international company based in Belgium, in the vicinity of Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring a spacious premises that serves as our display area. We always keep a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can help you find the right coach, school bus, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for our used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Ask for Agata.) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: new, mileage: 1,161 km, power: 294 kW (399.73 HP), first registration: 01/2026, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Equipment = - Front refrigerator - Retarder - Toilet - Webasto auxiliary heater = Further Information = Damage: None = Company Information = Dcedpfx Aox R Uh Rjbuec We are an international company based in Belgium, in the vicinity of Brussels (+/-20 km). Belgian Bus Sales is your ideal partner for buying and selling used buses, featuring a spacious premises that serves as our display area. We always keep a wide selection of buses of all makes, capacities, models, and price ranges in stock. We can help you find the right coach, school bus, or city bus tailored to your requirements and budget. All information is provided without guarantee. Subject to errors, prior sale, and typographical mistakes. Viewing hours for our used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. Mowimy po Polsku (Ask for Agata.) We speak your language: Nederlands, Français, English, Español, Português, Italiano, Русский, Polski, and more.

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2008 - partially overhauled, newly painted, Dcsdpehikrrofx Abujc RAL7035 light grey / RAL3027 raspberry red Mach. no.: 344349 Guarantee: 6 months geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating instructions - Used as seen -

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Dcedovr Hw Iopfx Abuec Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), Part suitable for: cars Technical condition: good Dsdpfxox N R Nno Abuecc Optical condition: good

Condition: good (used), mileage: 812,271 km, power: 320 kW (435.08 HP), first registration: 08/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,170 mm, total width: 2,550 mm, Year of construction: 2015, Equipment: AdBlue, central locking, cruise control, parking air conditioner, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Heated mirrors - Leaf suspension - Roof spoiler - Windscreen - Cab - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 Year of manufacture: 13-8-2015 / 18-2-2009 Mileage: 812,271 km Chassis numbers: XLRASH4100G073990 / XL9VA101092053008 Registration: 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoa wheels Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof 3 decks Fans Remote control release = Further Information = Technical information: Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration: Front axle: Tire size: 385/55R22.5; Max. axle load: 9,000 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf spring Rear axle 1: Tire size: 315/70R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Suspension: air suspension Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tire tread left: 50%; Tire tread right: 50%; Suspension: air suspension Weights: Unladen weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional: Body manufacturer: ZF Maintenance, history, and condition: APK (MOT): valid until 08/2026 Technical condition: good Visual condition: good Dcsdpfex Rtz Nsx Abujc Identification: Registration: 76-BGG-7 Additional information: Please contact VAEX The Truck Traders for more information.

Condition: good (used), Thread cutting head with Stehler jaws, thread cutting die Dcjdpfeb A N U Rex Abusc -inch thread: 1/2"-3/4"-1" inch -Weight: 5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting Dcodpjb A Rabsfx Abujc -inch thread: 1/2"-3/4" inch -Weight: 4.5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Dodpfx Abob A Rluouscc Thread cutting machine, pipe thread cutter -inch thread: 1/2"-3/4" inch -Weight: 6 kg

Condition: good (used), 4/3 way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block -Type: DG4V-3-6C Djdpsb A Sf Dsfx Abujcc Quantity: 1 piece available -Weight: 2.5 kg

Condition: used, Year of construction: 2005, FANUC 160 I-MB control Dodpfx Abjfxgiyouscc KNOLL chip conveyor, type 1200 S-2, made in 2012 4 workstations