Used Torque Wrench-3 4 Inch for sale (94,551)

Condition: used, mileage: 439,057 km, power: 320 kW (435.08 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 13,870 kg, maximum load weight: 21,130 kg, overall weight: 35,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,500 mm, brakes: engine braking, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 5,600 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Equipment: air conditioning, cabin, differential lock, trailer coupling, Vehicle location: Belgium 1, aluminum body, with house, 1x comfort seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, switch 16, differential lock, beacon, leaf suspension, air+light trailer hitch, roll-up tarpaulin, lashing rails, foldable under-run protection, green environmental badge Wheelbase: 4500 mm, Body: Dautel 3-way tipper, aluminum side wall, springs assisted disc brakes on front and rear axles, 50mm trailer hitch! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale and errors! Dcodpfx Abswlb Sfjujc - .

Condition: used, mileage: 1,001 km, first registration: 01/2012, color: silver, driver cabin: other, gearing type: other, loading space length: 6,200 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Year of construction: 2012, Vehicle location: Bovenden, steel superstructure superstructure: tipper body for 4-axle chassis, WITHOUT FRAME AND STAMP ! As good as new condition of D-Benz Arocs ( demonstration vehicle ) , subframe and stamp possible for an extra charge of 4.500,- EURO ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpji Rlgxofx Abujcc - .

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/1994, loading space length: 13,400 mm, loading space width: 2,460 mm, loading space height: 800 mm, total length: 2,540 mm, total width: 3,000 mm, suspension: air, tire size: 385 / 65 R 22,5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, 1st axle liftable, last axle positively steered, lifting+lowering, ABS (anti-lock braking system), storage box last axle positively steered via wedge, intended for mounting roller crane ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Dedpfx Absi Rqpqeujcc

Condition: good (used), Year of construction: 2018, Vehicle description Diesel forklift HYUNDAI 50DA-9 Year 2018 acc. Counter 19.360 hours 5 tons lifting capacity 4.90 meters lifting height 2.48 meters Overall height 75 KW Cummins Euro 5 engine - Triplex free lift mast - 3rd and 4th circle to fork carriage - Cabin with heating (one door) - lighting system - ready for immediate use - Original paint - Service maintained machine Selling price: 13.500,-- net Dodpfx Abor I Adzoujcc also favorable delivery possible!

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 50984, 3 rows of 8 filters 4 bags Filter area 31,2 m² RH 3500 mm fan 5,5 kW diam. 250 mm on 300 x 240 mm Brackets Feet Cover and filter bags Unfortunately, we cannot answer inquiries without complete contact information. Dsdpfeiamtpjx Abuocc

Condition: used, Offer in progress! Dcedpfxewh Ug Ue Abuec

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 Dsdeub R R Sspfx Abuscc with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: used, mileage: 58,569 km, power: 151 kW (205.30 HP), first registration: 08/2006, fuel type: diesel, overall weight: 8,800 kg, color: brown, gearing type: automatic, emission class: euro4, suspension: air, number of seats: 2, Equipment: air conditioning, cruise control, parking heater, trailer coupling, Roof hatch, green environmental badge (4), reversing camera, electric windows, HU/AU new, automatic diesel air suspension air conditioning auxiliary heating cruise control Euro 4 green environmental badge reversing camera 2-seater air suspension electric windows trailer coupling 3.5 t breakthrough side ramp 3-4 horses individually removable side ramp ramp ramp limiter hydraulic ramp roof hatch window in horse compartment surveillance camera in horse compartment tack room removable box storage space permissible total weight 8.800 kg Euro 4 possible at a surcharge of € 7,900.00 net. FOR US, THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE TAKES SECOND PLACE. If you have any further questions, please do not hesitate to contact Mr. Faller on the following number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Dedjvidb Sjpfx Abujcc

Condition: used, Year of construction: 2016, loading space width: 2,300 mm, loading space length: 5,700 mm, loading space height: 1,750 mm, Refrigeration structure: Deep freezer, 4 doors on the left, number of doors on the right 4 doors, 2 doors at the rear, partition wall can be folded and moved. Refrigeration unit: Multi-Temp with 2 evaporators, compressor/electricity drive, cooling down to -33 °C °C ID: 117992 4 pieces stock 3 temp/chambers ThermoKing -0°C -to -33°C Bj16 Plate cooling is a cooling system that uses eutectic plates to maintain a suitable temperature level. The passive plates are connected to the power grid (380V) overnight. The solidification point of the eutectic solution is -33 °C. The eutectic plates are used to maintain the temperature of the already frozen product. We always have a large selection of used refrigeration and ice cooling vehicles in stock. You can find more of our offer under Non-binding offer, sale only to traders, errors and prior sale reserved. Advertisements and company logos on vehicles may have been digitally edited on photos. Dcjdsv S Ntfspfx Abuec

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Characteristics: Dcsdpfx Absdv Scfeusc -Certified accuracy +/- 3% -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) - Low profile and flat design for extremely tight spaces

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale is our KUKA laser welding robot KR60-3 with KRC4 ROBOTstar controller. The system is in excellent condition and is only being sold due to a customer's product change. Laser welding robot KR60-3 with KRC4 ROBOTstar controller. Dedpovtnd Sjfx Abuscc Scanner processing optics combined with a camera system for welding copper connections. Component feed via Bosch Rexroth TS 2 plus transfer system. IPG laser system with 5 kW power output and fiber optic connection. Media supply. Turn-tilt module DKP 400. Laser safety cabin, active according to EN 60825. Operator panel / HMI for controlling the system. KUKA system control and PLC cabinet. Extraction and filtration system. The system is sold from its current location (Zollner Electronik, Str. Parc Industrial Sud 10, Satu Mare 440247, Romania). We are happy to answer any questions you may have about the system and can provide all documentation. The original purchase price in 2019 was approx. €980,000. Inspection and demonstration available by appointment at any time. Special feature: Also suitable for deep copper welding!!!! Estimated availability: Q2/2026.

Condition: used, TECHNICAL DETAILS - maximum bar diameter: 45 [mm] - number of spindles: 6 Djdpfx Abeuhavqjuecc - number of cross slides: 6 - number of spindle speeds: 26 - spindle speeds: 132-1667 [rpm] - Electromagnetic clutch - dimensions: 6454 X 1457 [mm] - weight: 8077 [kg] EQUIPMENT - Pick-up station 6 - Stock reel and stand - IEMCA PRA 40/42F barloader - Additional tank with coolant pump - Swarf conveyor - Promatec smoke extractor

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Number of cross slides : 6 SPINDLES - Max. bar diameter : 45 [mm] - Spindle speeds : 132 - 1667 [rpm] COUNTER-SPINDLE - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 6454 x 1457 [mm] - Machine weight : 8077 [kg] Dcodpewdaiyefx Abuec EQUIPMENT - CNC : Fanuc Series 0i-TD - Parts catcher - Parts conveying strip - Coolant tank - Bar loader : IEMCA PRA 40/42F - Bar holder and stand - Oil mist extractor

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Accessories ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: As new Technical condition: very good Description: Adapter ISO 3A (51 cm) to ISO 4A (61 cm) Capacity 5,000 kg Dcedew Ez Tpepfx Abujc Width 1,500 mm ID OS1699

Year of construction: 2020, condition: used, New: Yes Colour: Orange Field of application: Mining Volume of the tank: 150 m^3 Productivity: 250 tph Rated sizes : 2000 x 6000 mm Dodpfx Ajx D A Upobuscc Motor power : 22 kw 1500 d/dk Drive system : with conventional drive, with 2 weights Amount of Ball Bearing : 2 ea Number of Ball Bearing :2*22318 (FAG T41 Ball Bearing with Vibration Amplitude) Screening area : Single stage Number of Vibration amplitude : 6-8 amplitude, Linear Free Eliptic Number of Springs : 12 ea Front chute : with 6 mm rotary chute Bottom chute : flat discharge chute Type of power transmission : belt pulley couples Body Construction : Heavy duty type (12mm ST37 Ereğli Iron Steel Sheet Metal)

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. Djdpfsg N Db Hsx Abuscc These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: excellent (used), Year of construction: 2017, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 17E000332104800, 1. AUTOMATIC EDGEBANDING MACHINE Model GTM 4/3 – GRIGGIO The automatic edgebanding machine model GTM 4/3, manufactured by the Italian company GRIGGIO, is a new model launched in 2017, replacing the previous GB 4/3 model. It features a modern concept designed for straight panel edgebanding with PVC and ABS materials. The machine is equipped with the following working units: Dedow Tkl Nspfx Abuocc a) Gluing unit for hot-melt adhesive, featuring rapid heating and a fully Teflon-coated tank for easy cleaning. b) Pressure unit for bonding the edging to the panel – equipped with three rollers: the first is a large-diameter driven roller, while the remaining two are idler rollers with opposing tapers. c) End trimming unit with high-frequency motors designed to trim the overhanging edging flush with the panel at both the front and rear ends at a 90º angle • Installed power: 0.38 kW • Blade speed: 12,000 rpm d) Top & bottom trimming unit with two independent high-frequency motors for removal of excess edging from the top and bottom of the panel • Motor power: 0.55 kW e) Scraper unit for optimal finishing of 2 mm PVC or ABS edge banding applied to the panel edge • Supplied with a pair of knives for use with 2 mm ABS edging f) Buffing unit • Two independent motors for cleaning/polishing the edge banding • Installed power: 0.19 kW • Equipped with 100 mm diameter brushes Maximum panel thickness: 45 mm Minimum panel width: 90 mm Minimum panel length: 200 mm Feed speed: 9.5 m/min Edgebanding overhang (top + bottom): 4 mm (2+2) Pneumatic system pressure: 6 bar Frequency inverter: 200 Hz for motors, enabling 12,000 rpm rotational speed General features: • The machine frame is constructed from a single-piece, high-rigidity steel sheet. • Panel feed system is of the caterpillar type, with skids covered with high-adhesion rubber. • The skids move on dual steel guides – one round and one flat, both hardened and ground, ensuring straight movement and resistance to lateral forces from the working groups. • Upper pressure unit made of aluminum, featuring rubber pressure wheels mounted on bearings, ensures improved linear piece movement. Included spare parts kit (in machine price): - 2 upper rubber pressure rollers - 1 rubber roller for end trimming unit - 2 cotton buffing discs - 5 rubber pads for feed conveyor track - 4 adhesive pot heating elements - 1 temperature probe EXW price: €10,000 (excluded VAT) Manufactured in EU Excellent condition No pre-milling unit Operating hours: 300 h

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-2060 Djdpfx Abexpyineuscc Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: new, functionality: fully functional, Year of construction: 2025, CONSTMACH vibrating screens are engineered for aggregate, mining, and recycling applications, featuring a durable body for long service life. Their simple yet efficient design ensures precise screening of various materials. The modular structure allows easy maintenance and quick part replacement, while the user-friendly design boosts productivity. Screens can be produced as “top-driven” or “center-driven,” with steel or polyurethane surfaces depending on material hardness. High-frequency vibration provides effective material distribution and optimal separation. With powerful motors, balanced vibration, and damping systems, CONSTMACH screens ensure reliable, continuous operation. Vibrating Screen Technical Specifications Model: CVS-1240 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,200 x 4,000 mm Production Capacity: 70 – 95 t/h Motor Power: 7.5 / 11 kW Weight: 7,400 – 8,000 kg Model: CVS-1640 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,600 x 4,000 mm Production Capacity: 100 – 130 t/h Motor Power: 11 / 15 kW Weight: 13,500 – 14,750 kg Model: CVS-1650 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,600 x 5,000 mm Production Capacity: 130 – 160 t/h Motor Power: 11 / 15 / 18.5 kW Weight: 14,000 – 15,500 kg Model: CVS-1850 Number of Layers: 2 / 3 / 4 Layer Dimensions: 1,800 x 5,000 mm Production Capacity: 140 – 180 t/h Motor Power: 11 / 15 / 18.5 kW Weight: 16,000 – 17,500 kg Model: CVS-2050 Dcjdpfx Aoxpvq Uobuec Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 5,000 mm Production Capacity: 170 – 220 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 16,500 – 18,200 kg Model: CVS-2060 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,000 x 6,000 mm Production Capacity: 192 – 240 t/h Motor Power: 15 / 18.5 / 22 kW Weight: 17,500 – 20,500 kg Model: CVS-2470 Number of Layers: 2 / 3 / 4 Layer Dimensions: 2,400 x 7,000 mm Production Capacity: 268.8 – 336 t/h Motor Power: 2x15 / 2x18.5 / 2x22 kW Weight: 20,500 – 24,000 kg Why Choose CONSTMACH Vibrating Screens? CONSTMACH offers maximum efficiency, low maintenance costs, and long service life with its screen systems manufactured to international quality standards. It provides solutions suitable for every capacity with its wide range of models. With superior engineering, a reliable drive system, and the use of highly durable materials, CONSTMACH offers its customers not just equipment, but a sustainable investment. If you are looking for high performance, low energy consumption, and easy maintenance in your production line, CONSTMACH Vibrating Screens are the most suitable solution for your needs. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products tailored to their needs. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-term use advantages.

Condition: good (used), The scope of delivery includes: 56x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm Dcjdpfxjpl Tfwj Abusc inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 10x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: Dcjdpfx Aspl Tdgjbuoc The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 28x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Dcodjpl Tdnjpfx Abuoc Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 Dsdpfxspiur As Abujcc design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 261x stacking transport box, used Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm Dcsdpfx Aspl Tcbobuoc inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Remark: These are used stacking transport boxes. There may be scratches, soiling and color color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 1.044x stacking transport box, used Djdpfx Ajpl Tf Eebuecc Manufacturer: SSI Schäfer type: 14/6-4 design: recessed grip on both sides color: blue material: polypropylene Outer dimensions LxWxH: 210x150x123mm inner dimensions LxW: 190x123mm Useful height in stack: 110 mm Capacity: 2,50 Liter Stackable: yes Weight | Piece: 0,266 kg Weight / pallet: approx. 95,00 kg Weight / 1,044 pcs.: approx. 380.00 kg Remark: These are used stacking transport boxes. There may be scratches, dirt and color defects. color defects may be present. Application: The stacking transport boxes are suitable for storing tools, screw materials and other small parts. small parts. General information about the article: This item is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.