Used Traub Tnl 26 for sale (102)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Control system: Traub TX 8i Main spindle Max. bar diameter: 26 mm Max. speed: 8,000 rpm Counter spindle Bedpfxoz Erdts Aiwjww Max. bar diameter: 26 mm Max. speed: 8,000 rpm Tooling system Number of turrets: 2 (upper and lower turret) Tool positions per turret: 12 stations, without drive Front tool holder, 5-position, with Z3 slide, without drive Rear machining station (5 tools), without drive Bar loader: IEMCA BOSS 432/44

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Bsdpfx Ajzuzz Aoiweww

Condition: excellent (used), CNC machine Traub TNL 26 Condition used, in good condition Bjdpfx Aiehlp Sdjwsww Sale to the exclusion of any warranty

Condition: used, Year of construction: 2003, CNC long-turn lathe with bar feeder magazine, Stamag FMB Turbo 5-42 Control system: TX8i with Traub tool monitoring Bwjdpfx Aez Aqkcsiwew Main spindle: - C-axis with driven tools - Mounting for driven guide bushing, max. passage 26 mm, stroke 225 mm - Electrical and pneumatic control for driven guide bushing Counter spindle: - Counter spindle as a motor spindle with hollow clamping and locking device with Z4 slide - C-axis - Tool carrier at the bottom, X1 / Y1 axes - 12 driven tool positions - Tool carrier at the top, X2 / Z2 axes - 12 driven tool positions - X3 - cross axis for front tool holder / counter spindle - Front tool holder, 5-position with Z3 slide, without tool drive - Cut-off station (5 tools) with X4 / Y4 axis, without tool drive - Articulated belt conveyor - Coolant system for externally and internally cooled tools, 20 l/min - 30 bar - System for deep-hole drilling with compact belt filter and coolant tank, 1000 L volume - Air deflection plates on the temperature control unit - Fire protection system for machining with cutting oil - Coolant mist extraction system

Condition: used, Year of construction: 2017, operating hours: 13,700 h, machine/vehicle number: IntNr2316661, A CNC vertical turning center, TRAUB TNL 12, manufactured in 2017, equipped with a TRAUB TX8i-s control system and comprehensive peripherals, is for sale. The machine comes from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General technical data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Bwedpfj Ahfarox Aiwew Model: TNL 12 Year of manufacture: 2017 Control system: TRAUB SYSTEM TX8i-s CNC axes: 11 axes Max. bar diameter: 13 mm Max. turning length: 130 mm Operating hours (recorded) Control system ON: 22,868 h Production time: 13,620 h Spindle running time: 9,945 h Main spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Counter spindle Max. speed: 12,000 rpm Drive power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-axis resolution: 0.001° Tool carrier / Machining Tool turret: 2 turrets Tool stations: 6 stations each Powered tools: on all turret stations Tool drive (turret): Up to 8,000 rpm Tool drive power: 1.5 kW (25% duty cycle) Front machining unit: 4 tool stations Rear machining unit: 4 tool stations Simultaneous machining: Depends on the number of tool carriers Equipment and peripherals Bar feeder: FMB minimag 20 CO₂ extinguishing system: Kraft & Bauer FB 703 Coolant treatment: RESY compact belt filter system Oil mist extraction: NOVA, mounted on the machine Electrical connection data Voltage: 400 V / 50 Hz / 3-phase Connected power: 16 kW / 19 kVA Rated current: 27 A The machine can be inspected by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Bwodoyzxp Topfx Aiwjw Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: good (used), Year of construction: 2005, operating hours: 32,870 h, functionality: fully functional, machine/vehicle number: 6030578, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, bar diameter (max.): 32 mm, We offer for sale Traub TNL26K automatic cnc lathe. Machine is connected to power and can be inpected every time by prior appointment. Year of built: 2005 Spindle passage 32mm Main spindle: 6.7/10.7kW; 8000rpm Counter spindle: 6.7/10.7kW; 8000rpm Upper turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Bwedpfx Aisvldx Aswsw Lower turret: 12pos. 12x12/16x16, driven tools 2/5.5kW, 0-6000 rpm, 6.4/21 Nm Connected load: 24kW Barfeeder: FMB Turbo 5-42/4200mm Swarf conweyor: Knoll 240 S1/100 Coolant Kompaktbandfilter: Resy Machine is sold with a lot of toolholders not driven and driven - list on attached photo.

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 7, This 7-axis TRAUB TNL 32 7B swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 7Bswiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system not included, it is currently connected to a central one • Extraction: Connection D 150 mm for central extraction Additional equipment • bar feeder • 7B Version Technical Specification Bwjdpfxox D Drce Aiwjw Counter Spindle No

Condition: used, Year of construction: 2005, machine/vehicle number: IntNr2316671, A CNC vertical turning centre, TRAUB TNL 12, manufactured in 2005, equipped with a TRAUB TX8i-s control system and extensive peripherals, is for sale. This machine originates from the medical technology sector and is in exceptionally well-maintained condition, both visually and technically. General Technical Data Manufacturer: INDEX-Werke GmbH & Co. KG (TRAUB) Model: TNL 12 Year of Manufacture: 2005 Control System: TRAUB SYSTEM TX8i-s Bsdps Ahfavofx Aiwsww CNC Axes: 11 axes Max. Bar Diameter: 13 mm Max. Turning Length: 130 mm Operating Hours (Recorded) Control ON: 38,120 h Production Time: 22,345 h Spindle Run Time: 15,543 h Main Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Counter Spindle Max. Speed: 12,000 rpm Drive Power: 2.5 / 4.0 kW (100% / 25% duty cycle) C-Axis Resolution: 0.001° Tool Carrier / Machining Tool Turret: 2 turrets Tool Stations: 6 stations each Powered Tools: on all turret stations Tool Drive (Turret): Up to 8,000 rpm Drive Power (Tool Drive): 1.5 kW (25% duty cycle) Front Machining Unit: 4 tool stations Rear Machining Unit: 4 tool stations Simultaneous Machining: Depends on the number of tool carriers Equipment and Peripherals Bar Feeder Magazine: FMB minimag 20 CO₂ Extinguishing System: Kraft & Bauer FB 703 Coolant Treatment: RESY compact belt filter system Oil Mist Extraction: NOVA, mounted on the machine Electrical Connection Values Voltage: 400 V / 50 Hz / 3-phase Connected Load: 16 kW / 19 kVA Rated Current: 27 A The machine can be inspected by appointment. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Bwede Ahq Raopfx Aiwjw

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 Bodpfx Asxu Dcveiwsww The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bjdjzxihfopfx Aiwsww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwedpfx Aijzxihrowsw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bjdpfxszxiguj Aiwsww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Bjdpfezxii Asx Aiweww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bsdpfx Aiszxig Iowoww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwodpezxihxefx Aiwow

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bsdpfxezxigzs Aiweww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Bodpfx Ajzxii Neiwsww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bsdpfx Aijzxig Uswjww

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwsdezxiivspfx Aiwjw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwsdpozxuc Uefx Aiwsw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwsdpfxjzxighe Aiwjw

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwjdpszxih Eofx Aiwow

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Bwjdjzxiicepfx Aiwjw