Used Traub Tns for sale (108)

Condition: used, Year of construction: 2005, control Traub TX8i Guedpfjxzk Rmsx Ab Uek weight of the machine ca. 4000 kg

Year of construction: 2007, operating hours: 24,593 h, condition: used, machine/vehicle number: 5010481, Max. turning diameter: 340 mm, max. turning length: 750 mm, max. spindle speed: 4,000 rpm, chip conveyor, TX 8I control system, 12-position turret Gujdjx Akmqepfx Ab Uok

Condition: good (used), Year of construction: 2003, driven tools, Y-axis, B-axis TRAUB TX8 H control Turning diameter max 275 mm Turning length -450 mm Spindle speeds 5'600 rpm Turret head 12 driven positions Godpfxox A Evmo Ab Usuk Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2001, condition: good (used), bar diameter min. 18mm / max. 63mm Guedpfxei Dagco Ab Uok bar lenght min. 1000mm / max. 4200mm

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Gedpexwdw Eofx Ab Uouk Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) Gjdpfx Absu Idn Ho Ueuk *

Condition: used, Year of construction: 1990, Technical details: turning diameter: 445 mm turning length: 2000 mm total power requirement: 34 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 6 x 2,5 x 2,2 m turning diameter over bed slide: 660 spindle bore: 65 mm spindle speeds:: 16 - 3150 U/min. rapid motion - x-axis: 10 mm/min rapid traverse Z-axis: 15 m/min Gjdpfx Aew I R Ndeb Usuk with CNC Control TX 8 D C-axis driven tooling 14 station turret head tailstock, steady as NC-axis chip conveyor and coolant attachment *

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 978/9, turning length: 400 mm, travel distance X-axis: 120 mm, travel distance Z-axis: 300 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,000 mm, overall weight: 3,000 kg, controller manufacturer: TRAUB, controller model: SYSTEM TX 8 F, TRAUB TND 160 CNC Lathe - Operating voltage: 380 V - Frequency: 50 Hz Guodoxx Ny Ijpfx Ab Uek - Rated current: 36 A - Connected load: 18.8 kW The machine is equipped with a tailstock, a three-jaw chuck (diameter: 140 mm), an 8-position tool turret, and a chip conveyor. This is an item from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck

Condition: good (used), Year of construction: 2004, Traub TNA 400 Y, year of manufacture 2004, TX 8 H control, X/Z travel 285/750 mm, Y-axis travel +/-50 mm, C-axis 0.001°, V-axis – programmable tailstock, spindle speed up to 3,150 rpm, 12-position turret, driven tools, VDI 40 mounting, 4,360 spindle hours, machine from prototype production, ATC measuring optics, lots of accessories. Guedpfx Asxyyn Esb Ujk

Condition: like new (used), Year of construction: 2022, operating hours: 13,116 h, Max. bar capacity mm: 20 Max. Z-axis travel (sliding headstock/fixed headstock) mm: 205 / 80 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 C-axis resolution degrees: 0.001 Max. rapid traverse Z m/min: 20 Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 / 8,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Gedewuddvjpfx Ab Uouk Slide travel X mm: 120 / 165 Slide travel Y mm: ±25.4 Slide travel Z mm: 254 / 567.5 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 B-axis swivel angle degrees: 105 Lower turret: Tool stations: 8 Driven tools: 8 Max. tool speed rpm: 12,000 Tool holder diameter mm: 45 Drive power 100%/40% duty cycle kW: 1.0 / 2.0 Turning tool cross-section mm: 16x16 / 20x20 Slide travel X mm: 120 Slide travel Y mm: ±25.4 Slide travel Z mm: 155 Rapid traverse X/Y/Z m/min: 20 / 20 / 40 Back working device: Tool stations: 4 Slide travel X/Y/Z mm: 120 / ±25.4 / 155 Tool holder diameter mm: 25 Sub spindle: Max. spindle bore mm: 20 Max. spindle speed rpm: 10,000 Drive power 100%/40% duty cycle kW: 3.0 / 5.5 Torque 100%/40% duty cycle Nm: 5.73 / 10.5 / max. 17.2 Slide travel X mm: 235.5 Slide travel Z mm: 258 C-axis resolution degrees: 0.001 Rapid traverse X/Z m/min: 20 / 40 Coolant system basic unit: Pump pressure bar: 3 / 8 Tank capacity l: 250 Flow rate at 3 / 8 bar l/min: 80 / 120 Filtration degree µm: 200 Machine dimensions Length x width x height mm: see installation plan* Weight kg: 5,000* Connected load kW: 40 (47 kVA)

Condition: new, Year of construction: 2025, functionality: fully functional, Traub TFT Monitor/Screen TX8D, TX8F, TX8H Replacement Monitor Replacement Screen Gujdpfxjx Adb Ie Ab Uok Type: TFT (1) Item No.: 222549 (2) Item No.: 10892558 Condition: new Traub TFT monitor/screen TX8D, TX8F, TX8H Includes frame and cable, 1:1 interchangeable, 12" Plug and Play solution Not an original Traub spare part – 100% tested and compatible Manufactured by cnc-markt GmbH

Condition: excellent (used), Year of construction: 2012, ONLY 8,300 spindle hours! Control: TX 8 i-p MAIN SPINDLE Max. bar capacity: 32 mm Max. workpiece length - Swiss-type operation: 245 mm - Short turning operation: 125 mm Max. spindle speed: 6,400 rpm C-axis SUB SPINDLE Max. bar capacity: 32 mm Max. clamping depth of workpiece: 250 mm Max. spindle speed: 6,000 rpm C-axis UPPER TOOL TURRET Number of stations: 10 All driven Max. speed: 12,000 rpm Guodpfx Abjxrf Eto Ujk LOWER TOOL TURRET Number of stations: 9 All driven Max. speed: 12,000 rpm BACK WORKING UNIT Number of stations: 8 Driven stations: 3 (T12, 13 and 14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist filter Bar loader FMB turbo 3-36

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t Gjdpfxswp D Nbs Ab Ueuk dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor Godpjwpa Ruefx Ab Ujuk TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: good (used), Year of construction: 2004, control TRAUB SYSTEM TX8H weight 3500 kg range L-W-H 3960 x 1640 x 1800 mm output 11 kW number of spindle speeds 5600 / 4000 min-1 Torque 200 / 280 Nm The TRAUB turning machine TNA 300 was designed for the following machining of workpieces with a turning length of 450 mm. --> for machining metal and plastics with a defined cutting edge using suitable tools. Guedpfewwl Iusx Ab Ujk --> for mounting in jaw chucks of sizes 160 to approx. 250 --> for machining material bars up to a Ø of 42 or 65 mm --> with EHS special version Workpiece removal device --> chip conveyor 800 mm long -> Technical data Working range Spindle diameter: 42 mm --> Spindle head DIN 55026, size: A5 --> Clamping fixture diameter: 160-175 mm / 200-250 mm --> turning diameter max: 275 mm --> Distance over turning centre: 35 mm --> max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool carrier Tool holders for cylindrical shank DIN 60880: 12 pcs. --> Shank diameter: 30 mm --> Chisel cross-section: 20x20 mm --> Switching time 1 station: 0.5 sec. --> Switching time each additional station: 0.15 sec. --> Feed drives X-axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> rapid traverse/path speed: 15 m/min --> Z-axis: --> Slide travel: 450 mm --> Feed force: 6000 N --> rapid traverse/path speed: 18 m/min --> Y-axis: --> slide path: +- 35 mm --> Feed force: 6000 N --> rapid traverse/path speed: 10 m/min --> C-axis: --> Speed: 100 min-1 --> Torque: 140 / 196 Nm --> electrical resolution: 0.001 degree --> tailstock quill diameter: 70 mm --> quill stroke: 60 mm --> Stroke of the quick retraction: 280 mm --> quill setting force at 55 bar: 8600 N --> Mounting according to DIN 228: Mk 4 --> Steady rest Clamping range: 8 - 95 mm --> Workpiece removal device Max. part length: 250 mm --> Max. part weight: 3 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, Dear Sir or Madam, We are pleased to offer you a Traub TNL 26 CNC Swiss-type automatic lathe from the year 2004. The machine is in well-maintained, fully functional condition. Important Note: This particular model is equipped with only one turret. The TNL 26 was also manufactured in versions with two turrets – this offer explicitly refers to the version with a single turret. Technical Data (excerpt): Manufacturer: Traub Model: TNL 26 Guedpjxgg Rmjfx Ab Ujk Year of manufacture: 2004 Control: Traub TX8i-S Turret: 1 unit, lower position, 12 tool stations, driven tools (all-head drive) Bar capacity: 26 / 32 mm Max. main spindle speed: up to 8,000 rpm Drive power: approx. 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) Axes: X1 / Y1 / Z1, C-axis integrated in main spindle Chip conveyor: hinge belt, discharge height approx. 950 mm Machine weight: approx. 4,000 – 4,200 kg Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Condition & Application The machine is immediately available and ideally suited for the precise production of small and medium batches in the automotive, medical and precision engineering industries. Price & Terms Price: on request / negotiable Delivery: ex site, ex works Inspection: possible at any time by prior appointment. Should you require further information or wish to arrange an inspection, I am at your disposal at any time. Best regards, Arnd Sauter GmbH Björn Sauter

Condition: good (used), Internal item no.: 25090 Driven tool holder Index / Traub No.: W 7045003 B Very well-maintained condition! Gujdpfxexu Uz Nj Ab Uok The holder was used on a Traub TNL18.

Condition: used, Year of construction: 2003, max. bar material dia. 65 mm max. bar length 3.000 mm control System TX 8H CNC lathe | TRAUB - TNC 65 equipped with bar loader . The machine is in a well-maintained condition and can be inspected at any time under power. Gusdpoxbtp Eofx Ab Usk The machine videos from the production plant will be shared on request. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNC65 | TNC-65

Year of construction: 1989, condition: ready for operation (used), Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible. Gjdpfx Ajxwn Ihjb Ueuk

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN Gjdpfow E Nnbox Ab Ujuk tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Description: The machine is in good technical condition; testing is possible by prior arrangement. The offer also includes an FMB Minimag 20/3200 bar feeder, ensuring smooth and efficient material feeding into the machine. As part of the delivery, we can also provide internal equipment – guide bushes and collets for the main spindle, sub spindle, and bar feeder – suitable for material diameters of 3–12 mm. Gsdpfjx An T Usx Ab Usuk Max. bar capacity (mm): 20 (0.8) Z1 stroke max. (mm): 205 (8.1), 80 (3.1) Max. spindle speed (rpm): 10,000 / 10,000 Power at 100% / 40% (kW [hp]): 2.2 / 3.7 (3.0 / 5.0) Torque at 100% / 40% (Nm [ft-lb]): 14 / 23.5 (10.3 / 17.3) C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m [in]/min): 40 (1,574) Upper turret: Tool mounts (number): 8 Live tools (number): 8 Power at 100% / 40% (kW [hp]): 1 / 2 (1.3 / 2.7) Tool mounting diameter (mm [in]): 45 (1.8) Turning tool cross-section (mm [in]): 16 x 16 / 12 x 12 (0.6 x 0.6 / 0.5 x 0.5) X1 travel (mm [in]): 120 (4.7) Rapid traverse X1 (m [in]/min): 20 (787) Chip-to-chip time:

Condition: good (used), Internal item no.: 25091 Driven tool holder Adjustable angle head Gjdpfexvaqlex Ab Uouk Index / Traub No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18.

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub Guodpfx Abexu Dcvs Uek No.: 12068219 The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: good (used), Internal item no.: 25093 Driven tool holder Adjustable angle head Index / Traub Guodpfx Ajxvat Teb Uek No.: W 7045011A Very well-maintained condition! The holder was used on a Traub TNL18.

Condition: good (used), Internal item number: 25092 Driven toolholder Adjustable angle head Manufacturer: Index / Traub No.: W 7045011A Very well-maintained condition! Gujdpfexvazkex Ab Uek The holder was used on a Traub TNL18 lathe.