Used Two-Aisled Hall for sale (8,106)

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, power: 261 kW (354.86 HP), Lindner Urraco U75 D on wheel axle with magnet and remote control, fully refurbished. Tools: 6-piece set, 7/7 discs in Hammel design (condition: 85%) Total operating hours: 9800. 2024: New gearbox, new hydraulic pump, new hydraulic motors installed, now approx. 600 operating hours. Discharge conveyor overhauled, magnet unit replaced. Predoytdkfjpfx Abujc Tools 85%. Service newly performed. New paintwork. Immediately ready for use.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 6,565 h, load capacity: 1,000 kg, load center: 600 mm, fuel type: electric, power: 6.9 kW (9.38 HP), battery capacity: 750 Ah, battery voltage: 48 V, battery weight: 960 kg, fork length: 1,000 mm, tire condition: 99 %, overall weight: 4,897 kg, Equipment: head guard, pallet forks, We offer this used Jungheinrich EKX 410 narrow aisle forklift, manufactured in 2015. Type: EKX 410 Serial number: FN487296 Rated capacity: 1000 kg Battery voltage: 48 V Forklift weight without battery: 4897 kg Option: G+I 120 650 DZ Predpfxjz An Nps Abuec Year of manufacture: 2015 Center of gravity distance: 600 mm Rated power: 6.9 kW Battery weight min/max: 960 / 1062 kg If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 1977, condition: good (used), machine/vehicle number: 12200, Cylinder diameter: 400 mm Cylinder length: 1000 mm Max. pressure between cylinders: 2 x 450 kN Psdsy Ui Uyepfx Abuorc

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Podpfx Aoyrdlaobujrc Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION1750-840PM Baujahr: 2008 Schließkraft: 175 Tonnen Holmabstand 510 x 510 mm Podpez I Dd Defx Abujrc Einbauhöhe min. /max.: 500 - 800 mm Öffnungsweg: 450 mm Schnecken DN: 55 mm Max. Hubvolumen: 457,6 cm³ Spritzteilgewicht in PS: 455,8 g Ausstattung: 2 x Kernzug

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: A230159, For sale: Refurbished shaft set for Arjes Impaktor. The shaft set has been completely overhauled and inspected for cracks. It is in good technical condition and ready for immediate use. All tools are new and made from HB500. The shaft set is ready for installation and can be supplied with either EVO 1 or EVO 2 cassette, as required. Podpfx Abox Td Npoujrc We accept your old shafts in part exchange. Price and further details upon request. Cost-effective shipping available throughout Europe. Tecweld GmbH is a company specializing in the refurbishment of wear parts. Our focus is on the repair and reconditioning of crusher and shredder shafts. This is precisely where our core competence lies. Thanks to our many years of experience and expertise, we are able to offer cost-effective solutions. In many cases, professional refurbishment is significantly more economical than purchasing new parts or carrying out time-consuming repairs in-house. For our customers, this means reliable technology, predictable costs, and an economical alternative to replacing new components. Please feel free to contact us – we are happy to advise you.

Condition: good (used), functionality: fully functional, Characteristics: * Length: 40 m * Width: 20 m * Height (center): 10.2m * Height (side): 6 m * PVC roof: 850 gr/m2 Pedjwbtayepfx Abusrc Description: Aluminum profile building of 800 m² with PVC roof. The building is equipped with a control cabinet, 6 electric air heating units (with temperature control), lighting and several outlets 220/380. Furthermore, there are 2 electric overhead doors. The building is demountable and can be expanded if required.

Condition: like new (used), functionality: fully functional, These loading ramps have only been used once. Prjdpfx Abjyk Dyzeuoc Load capacity per ramp for two-axle vehicles with axle load distribution 40% to 60% with axle spacing 1.50 m 5,655 daN (kg) with axle spacing 2.00 m 6,505 daN (kg) Single-axle vehicle 3,830 daN (kg) Max. permissible gradient 30% (16.5°)

Condition: excellent (used), Year of construction: 2018, operating hours: 20,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit SECHS ACHS Roboter Hersteller: ARBURG Typ: 570S2200-400/170 Baujahr: 2018 Schließkraft: 220 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Prjdpfeu E Id Tjx Abusc Schnecken DN 1: 40 mm Max. Hubvolumen: 201 cm³ Spritzteilgewicht: 184 g/PS Schnecken DN 2: 25 mm Hubvolumen: 59 cm³ Spritzteilgewicht: 54 g/PS Steuerung: SELGOCIA Ausstattung: 3 x Kernzüge Vertikale Spritzeinheit Verlängerte Holme Vorverlegter Zylinder 6 - ACHS Roboter, Hersteller: KUKA, Typ: KR 16 Wikut, Baujahr: 2018 Förderband Schutzzaun

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, 1. The Eppendorf 5910 Ri is a high-performance, refrigerated benchtop multipurpose centrifuge managed via an advanced touch interface. • Max. Speed: 14,000 RPM (adjustable in 1 RPM steps) • Max. RCF (g-Force): 22,132 × g • Maximum Capacity: 4 × 1,000 mL (with compatible large-capacity rotors) • User Interface: 7-inch VisioNize® touchscreen supporting 99 programs and user management • Temperature Control Range: -11 °C to 40 °C (Dynamic Compressor Control maintains 4 °C at maximum speed) • Acceleration/Deceleration: 10 / 10 ramps • Timer: 10 s to 99 h 59 min, continuous run, and short-spin functionality • Data Export: GLP/GxP compliant PDF or CSV export via standard USB • Dimensions (W×D×H): 72 × 66 × 37 cm (28.3 × 25.9 × 14.5 in) Psds Ad Nb Hjpfx Abusrc • Weight: 109 kg / 240 lbs (excluding accessories) 2. Rotor S-4x750 (Swing-Bucket) This medium-to-high capacity swing-bucket rotor is designed for high-throughput daily workflows, including cell culture and clinical applications. • Nominal Capacity: 4 × 750 mL (total 3,000 mL) • Maximum Speed: 4,700 RPM • Maximum RCF (g-Force): 4,800 × g (up to 4,816 × g depending on internal bucket variant) • Max. Radius: 19.3 cm • Versatility: Accommodates interchangeable round buckets, plate buckets, or mixed loading configurations. Adapters handle everything from 0.2 mL tubes up to 750 mL flasks and microplates. • Safety & Autoclavability: Available with optional aerosol-tight QuickLock® caps. Buckets, caps, and internal adapters are fully autoclavable at 121 °C. • Noise Level: < 57 dB(A) when running inside the 5910 Ri. 3. Rotor FA-6x50 (Fixed-Angle) A heavy-duty, high-speed fixed-angle rotor optimized for molecular biology applications requiring efficient sedimentation of dense pellets. • Maximum Capacity: 6 × 50 mL conical or round-bottom tubes • Maximum Speed: 12,100 RPM (often configured up to 13,500 RPM on specific 59-series profiles) • Maximum RCF (g-Force): 20,130 × g • Max. Radius: 12.3 cm • Borehole Angle: 45° angle orientation to minimize pellet smear. • Material: Anodized aluminum body providing superior chemical resistance. • Safety Features: Included aerosol-tight QuickLock® rotor lid for easy one-hand locking and safe handling of hazardous bio-materials. • Noise Level: < 59 dB(A) when spinning at peak operational profiles. Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, machine/vehicle number: 16054527/2016, Year of construction: 2016, operating hours: 3,353 h, lifting height: 8,500 mm, fuel type: electric, battery manufacturer: SUFFEL, battery model: PERFECT PLUS, battery capacity: 775 Ah, battery voltage: 48 V, battery weight: 1,119 kg, Equipment: head guard, lighting, pallet forks, sideshift, Magaziner EK1100 Narrow Aisle Forklift Manufacturer: Magaziner Model: EK1100 Year of manufacture: 2016 Serial number: 16054527/2016 Operating hours: 3353 h Technical data Rated load capacity: 1100 kg Dead weight: 4500 kg Battery weight: 1065 kg Max. battery weight: 1175 kg Battery voltage: 48 V Drive motor: 5.0 kW Battery Type: 5 PZS 775 Voltage: 48 Volt Psdpfx Asy Uc U Hsbuorc Capacity: C5 775 Ah Weight: 1119 kg Date of manufacture: 05/27/2016 Serial number: 6466684001 Number of cells: 24 Suffel Perfect Plus The narrow aisle forklift is in good used condition and is fully functional. Inspection and test drive possible by arrangement. Further information and pictures available upon request.

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 3,632 h, load capacity: 2,000 kg, lifting height: 6,050 mm, free lift: 2,000 mm, fuel type: electric, mast type: triplex, construction height: 2,840 mm, fork carriage width: 1,000 mm, fork length: 1,200 mm, empty load weight: 6,900 kg, total length: 2,800 mm, drive type: Elektro, construction width: 1,250 mm, Narrow aisle forklift Load center: 600 Fork width: 160 mm Fork thickness: 60 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire type: Solid tires Front tire size: 16 ¼ x 7 x 11 ¼ Rear tire type: Solid tires Rear tire size: 457/178-308 Battery voltage: 48V Battery capacity: 775Ah Battery year of manufacture: 2023 Description: In addition to this Aisle Master model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Lease purchase and financing at favorable terms are always possible for us. We would also be happy to buy your used forklift outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this 20SE model. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Side shifter, Pede Agp I Uopfx Abujrc Telescopic forks: 1200 / 2050 mm Heater, full cabin, full free lift,

Condition: good (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,780 h, load capacity: 2,000 kg, lifting height: 5,010 mm, free lift: 1,750 mm, construction height: 2,570 mm, battery voltage: 48 V, fork length: 1,150 mm, Flexi G4 Very compact electric forklift that can be used between pallet racks with limited space or like any other forklift. Load capacity: 2000 kg Lifting height: 5010 mm Overall height: 2570 mm Free lift: 1750 mm Year of manufacture: 2012 Operating hours: 7776 Battery: 48 V Includes charger for 400 V Transport can be organized. Podpew H Aggofx Abuerc

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at ). Two-shell grapple with extension / Grapple / in stock & immediately available Price: €3,990.00 net / €4,748.10 gross - Overall length (mm): 3,600 - Weight (kg): 1,640 - Shell width (mm): 1,080 - Opening width (mm): 1,800 You can find the exact technical dimensions in the attached images. We have a very large selection of various attachments in our warehouse, which are immediately available! Mr. Herden (Tel. ) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Errors and prior sale are subject to change! Internal No.: 619003 = More information = Predpszffl Hsfx Abuec Application: Construction Unladen weight: 1,640 kg Please contact Marius Herden for further information.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. Prodpfxstvdcyo Abuec The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance. The most well-known product from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install air circulation unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall, depending on the standard configuration. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of equipment, halls can be heated in a particularly economical way – directly, without a central heating system – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust gas connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculation operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day-night-week program - Exhaust gas extraction via the roof, version B or C * - Exhaust gas extraction through the exterior wall, version C * Pedpfx Aex Ihiijbuerc Gas-fired air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat output (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 1360 m3/h Protection class: IP20 You can find more new and used products in our shop! International shipping costs on request!

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: CD-2008II, FOR SALE: CD-2008II Two-Line Wet Wipe Machine (Unused / Like New) We are offering a CD-2008II two-line wet wipe production machine in excellent condition. The machine has never been used in production, only tested, and is therefore in like-new condition. Key Features: • Double-line production (high efficiency) • Significantly faster than the standard CD-2008 model • Includes: folding, wetting, and cutting systems • Suitable for various wipe types (baby wipes, hygiene wipes, etc.) Condition: • Unused / test run only / zero production hours • Fully functional • Available for inspection or video demonstration Important: Predpfx Ajy Tkgzjbusc • Packaging unit NOT included (converting machine only) This is a great opportunity to purchase a near-new industrial machine at a significantly reduced price. 📍 Location: [Budapest, Hungary] 📦 Ready for immediate delivery Shipping and handling are the responsibility of the buyer. For more information, photos, or videos, please contact us.

Year of construction: 1978, condition: used, Pressing force: 75/5kN, motor power: 11kW, an on-site inspection is possible. Psdpfxj Adt H To Abuorc

Condition: used, Reznor UDSA Gas-Fired Air Heater UDSA gas-fired air heaters – efficient, even at peak performance The most well-known device from REZNOR is the UDSA gas-fired air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 output sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from outside or from the hall itself. The UDSA gas-fired air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and trendsetting. With this generation of devices, halls can be heated in a particularly economical way directly – that is, without central heating – using decentralized, modulating gas-fired air heaters. REZNOR UDSA Gas-fired air heater. The advantages: Efficiency of more than 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These units are directly heated gas-fired air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired air heater, including the gas and exhaust connections, may only be carried out by a certified installation company. The gas-fired air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage*, controlled via a room thermostat and a heating control switch - Ventilation, controlled via ECOtronic TN - L with day/night/week program - Exhaust gas discharge via the roof, version B or C Podpox Ihg Ijfx Abusrc - Exhaust gas discharge through the outer wall, version C Gas-fired air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Max. rated heat input (Hs) QN: 30.08 kW Max. rated heat input (Hi) QN: 27.75 kW Max. rated heat output: 25.53 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Compressor refrigeration Podpfxoxxcahs Abusrc

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed rotary vane vacuum pumps. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These parts are pinned together to ensure easy disassembly and assembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air swallowing High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Suction flange: DN 40 ISO-KF Discharge flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10-4 mbar Ultimate total pressure without gas ballast: < 2.0 x 10-3 mbar Ultimate total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume: min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Predpezianwjfx Abuec Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), functionality: fully functional, machine/vehicle number: Serial No.: 110847, Year of construction: 2015, load capacity: 1,350 kg, lifting height: 6,000 mm, fork length: 1,150 mm, tire condition: 50 %, Equipment: pallet forks, Predpfx Abey Hi I Deujc

Condition: new, Year of construction: 2026, functionality: fully functional, RSS 2-shaft shredder, 800 series, 2 x 7.5 kW Rotor length: 800 Blade thickness: 20 mm The machine can be customized to your specifications, including the control panel. Delivery time upon consultation. Infeed and outfeed conveyor belts are available as an option. This shredder is ideally suited for destroying, for example, hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Upon consultation, we can also deliver and install the machines. Prjdsw Ry Alspfx Abuoc Please provide your name, company name, and a valid telephone number so we can respond quickly.

Condition: used, Leybold Type: Trivac D 40 B The TRIVAC B series are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pumping chamber serves as a sealant, lubricant, and coolant. The pump housing is made up of individual parts without sealing elements. These are pinned together to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation, energy-saving Energy-saving: Low power consumption Low heat dissipation Modern vacuum technology: High pumping speed up to the ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, force-lubricated plain bearings Minimal air intake High leak tightness (suitable for 4He) Technical data: Product: TRIVAC D 40 B Suction side connection flange: DN 40 ISO-KF Pressure side connection flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Prodpfx Abszgbvqsusc Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10⁻⁴ mbar Ultimate total pressure without gas ballast: < 2.0 x 10⁻³ mbar Ultimate total pressure with gas ballast: < 5.0 x 10⁻³ mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Operating fluid volume min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Mains connection: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min⁻¹ Motor speed at 60 Hz: 1,735 min⁻¹ Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: Rod20x10RES, ABUS ZHB overhead crane runway, approx. 20x10m Load capacity / lifting capacity: 1000 kg (1 ton) Technical data: Runway made of ABUS HB250 rails The system is delivered complete: ABUS HB rails, rail connectors, trolleys, end plates, cable carrier, brackets/hangers, etc. Including Abus GM electric chain hoist, travel drives, and pendant control Lifting height approx. 3.5 m The crane is dismantled and available immediately Rail color is affected by oil mist Used condition, see pictures Pedpexr S Dcsfx Abujrc Item location: 75053 Gondelsheim Shipping by freight forwarding or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock!