Used Universal Hardness Tester for sale (5,062)

Condition: used, Year of construction: 1989, x-travel 750 mm y-travel 270 mm z-travel 300 mm Ibodpfew Hlzgex Ah Usf table-size 900 x 350 mm spindle taper ISO 40 spindle turning speed range 18-1600 U/min Number of working hours 2543 h digital readout 3-Achsen Heidenhain total power requirement 10 kW weight of the machine ca. 1570 kg dimensions of the machine ca. 2,60 x 3,80 x 2,35 m Universal milling machine Berlett FE1-10, year of manufacture 1989 Very robust tool milling machine with many accessories. Various vices. Manual rotary table Various holders and milling cutters Coolant tank Full tool cabinet with milling cutters etc.

Condition: used, Year of construction: 2019, x-travel 3.400 mm y-travel 3.400 mm z-travel 1.600 mm Control CELOS 840D sl Op Siemens max. spindle speed 20 - 15.000 min/-1 power capacity - main spindel 52 / 42 kW tool taper HSK-A100 max. Torque 404 / 280 Nm Ibjdpfox H Tt Dsx Ah Usf swivellable B: -30° / +180 ° table diameter 2.500 x 2.000 mm max. table load 10.000 kg table speed 5 min/-1 distance spindle center to table hor.: 130 - 1.730 mm distance spindle center to table vert.: 230 - 1.830 mm distance spindle nose and table hor.: -1.500 - 1.900 mm distance spindle nose and table vert.: -1.600 - 1.800 mm type 5x Rad- / Wheel number of toolpositions 303 pos. max. tool diameter 110 mm max. tool-dia with free toolbox 280 mm max. tool length 900 mm max. tool weight 45 kg tool changing time 7,5 sec tool taper HSK-A100 rapid traverse 60 / 30 / 40 m/min total power requirement 140 kVA weight of the machine ca. 106 t dimensions of the machine ca. 14,0 x 13,0 x 7,0 m 5-Axis-CNC-Heavy-Duty-Machiningcenter Universal DMG MORI - DMC 340 U - Accuracy package - MDynamics package (Improved surface finish with reduced machining time) - Only approx. 10,500 spindle hours - Cone cleaning station with rotating brushes - Balluff tool identification - Machine protection via rapid shutdown (MPC) - Laminated safety glass - Machine design for pit installation - Heidenhain linear scales (instead of Magnescale) - Camera remote system with screen on the control panel

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 840 mm Measurements depth 1090 mm Measurements height 1960 mm Machine weight 620 kg Main Drive Isdpfx Ahox H A Rrj Uobf Number of axis 5 This 5-axis ESPE LAVA CNC 500 was manufactured in 2010, featuring a robust universal machining center design. It operates on a supply voltage of 200-240 V AC and supports a nominal output of 0.92-1.1 KW. The machine dimensions are 1090 mm in width, 1960 mm in height, and 840 mm in depth, weighing approximately 620 kg. If you are looking to get high-quality milling capabilities, consider the ESPE LAVA CNC 500 machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Ibjdpsx A Aa Ajfx Ah Ujf Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Ibodpjx Hgilefx Ah Usf Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system *

Condition: refurbished (used), Year of construction: 2003, operating hours: 47,000 h, functionality: fully functional, Manufacturer: Deckel Maho / DMG MORI Model: DMU 70 eVolution (extensively overhauled; new guideways, new motor spindle, new hoses, etc.) Year of manufacture: 2003 Serial number: 15035707964 Operating hours (as of 08/2025): Power-on hours: 100,115 h Cycle hours: 48,302 h Availability: from January 2026 Equipment and Accessories - CNC control: Heidenhain MillPlus V530 / 00m - Renishaw MP10 infrared probe - Motor spindle SK40, 18,000 rpm, operating mode 4 - Quick Set software for kinematic compensation - Blum laser system for tool measurement and tool breakage control - Tool magazine with 92 positions - Tebaron extraction/filter unit - ICS (internal coolant supply) through the spindle, 80 bar - Chip conveyor - Photos and videos available via MONTRASIO WhatsApp Business Maintenance, Servicing, and Upgrades (all carried out in 2025) - Annual maintenance by Maschinen- und Industrieservice ULRICH - Ongoing overhaul of individual components as part of normal wear - Y-card replaced - Y power module exchanged (new) - Mixer in the coolant system replaced with a brand-new mixer - 4-DO card A5-09A71 replaced - Complete overhaul of the motor spindle - GKT Z-axis completely overhauled - Guideways of all axes overhauled, including Y and Z-axis (brand-new guideways) - Coolant pump replaced by new pump - Connector on the high-pressure pump renewed (new) - Buffer battery replaced (new battery) - Lubrication hoses renewed (new hoses) - General maintenance performed by DMG MORI Direct Service in 2024 and 2025 (last service in 2025) - Monitor replaced (new) - Oil skimmer replaced Known Issues: Only age-related, visual or optical signs of use Application / History The machine will remain powered up and in production until calendar week 02/2026 Delivery calendar week 04/2026 Iodpfx Aox H S D Ush Uobf Previously used at LIEBHERR Aerospace Toolmaking machine – meticulously maintained high-precision machine with documented maintenance history, complete logbook, structured spare parts management, and regular spindle inspections (every six months) Reason for sale: Acquisition of a brand-new GROB 550 5-axis machining center

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Ijdpfxjxukppe Ah Uebf Bed milling machine with swivable spindle to horizontal or vertical. Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: used, Universal Tool Milling Machine WEMAS - MAKOSON Type WM 2 Year of manufacture: 1992 Ibodpfxjx Hkd Tj Ah Uof Travel ranges X: 480 mm, Y: 350 mm, Z: 250 mm Table size: 800 x 400 mm Spindle taper: ISO 40 Quill vertical travel: 80 mm Spindle speed: 35 to 4000 rpm, 3 steps Feed X, Y, and Z: 1 to 850 mm/min, stepless Rapid traverse X, Y, and Z: 1 m/min Spindle drive: approx. 3 kW ?? Electrical connection: 400 Volt, 50 Hz - Swiveling control panel with HEIDENHAIN digital readout, type Positip 850 - Spindle speed via 3 gearbox stages and stepless adjustment via frequency converter - Conventional handwheels for X, Y, Z - Vertical milling head with drilling quill swiveling +/- 90° - Manual tool clamping with M16 thread - Manual central lubrication - Coolant system integrated in machine base - Control cabinet fixed to the machine - Fixed angle table Space requirement L x W x H: 1900 x 1700 x 1820 mm Weight: approx. 2000 kg In good condition

Year of construction: 1988, condition: good (used), CNC universal console milling machine Fabr.KLOPP Type:FWS15 Bj.88 CNC contouring control Heidenhain TNC 155. Travel:X1170mm Y:420mm Z:420mm Aufspanntisch:1500X400mm Spindle mounting:SK50 Spindle power:15KW Spindle speed:35-3550rpm Counter bearing for horizontal milling, cooling device, spittoon, Various tool holders, Complete machine documentation. Machine immediately ready for use Workshop tested. New parameters and batteries on 20.08.2020 Isdpfxebu Em Ae Ah Uobf Installed. Good general condition. Machine can be run under current.

Condition: used, Zwick Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone. Ijdpsx Az Skjfx Ah Uebf

Condition: ready for operation (used), empty load weight: 1,300 kg, x als gemotoriseerd Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Iodpfxoxpgfij Ah Usbf Max quill travel Z': 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Isdpfx Ahjw Am Nqs Uebf Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X travel: 800 mm Y travel: 700 mm Z travel: 600 mm Ibsdpfx Ajx Dlf Roh Uef B-Axis: Automatic swiveling milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Tool holder: SK40 Accessories: Chip conveyor Through-spindle coolant 40 bar Handwheel Heidenhain TS 642 probe

Condition: used, Universal Tool Milling Machine ORADEA EURO-MILL STIMIN (Romania) Model FUS 32 Serial No. 5591 Year of construction: 2009 Travel: X: 560 mm, Y: 320 mm, Z: 400 mm Table size: 950 x 450 mm Tool holder (vertical head): ISO 40 - M16 Tool holder (horizontal spindle): ISO 40 - S20x2 (Deckel-compatible) Spindle speed: 25-2000 rpm, 18 steps Ibedpfx Ajx Hkd Hoh Usf Feed rate: 5-400 mm/min, 18 steps Rapid traverse: 1400 mm/min Main spindle motor power: 3 KW Electrical connection: 400 Volt, 50 Hz, 10 KW - 3-axis digital readout and linear glass scales by HEIDENHAIN, type ND 780 - Vertical milling head with quill, swivels +/- 90° - Quill travel at vertical head: 100 mm - Manual tool clamping with M16 thread - Counter bearing for horizontal milling with Ø 48 mm bearing bush - Central lubrication - Electrical control cabinet mounted on machine side - Coolant system integrated in machine base - Machine lamp - Including 2 tool holders - Operating manual with electrical diagram Required space (L x W x H): 1800 x 1600 x 1800 mm Weight: 1650 kg Very good condition

Condition: good (used), Year of construction: 1986, CNC universal milling machine DECKEL Type: FP5NC Year 1986 Control DIALOG 4 Only spare parts Please ask what you need. Iodpfx Ahedtdahs Usbf

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was built in 2022. It is suitable for all types of material testing, for example tensile, compression, and bending tests in laboratory, industrial, and quality control environments. Technical data of the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Test Force (Fnom): 10 kN Model: Z010 TN ProLine, nominal force: 10 kN Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuously up to nominal force Ibjdpfx Ahex Aqxmj Uof High-precision guidance, very low noise generation High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/elongation control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series is among the most precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photos) Zwick/Roell ProLine Z010 testing machine Test head / compression device PC system with monitor, keyboard, and mouse Various test fixtures and accessories (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2014, Ref. -No.: 10553 Manufacturer: HANDTMANN / BAVIUS Type: HBZ Trunnion 120 Year of construction: 2014 Type of control: CNC Control: Heidenhain TNC 640 Storage location: Halberstadt Country of origin: Germany Machine-No.: 200XXXXX X-Travel: 1270 mm Y-Travel: 1100 mm Z-Travel: 900 mm Table Height: Ø 1200 mm Table Load: 2000 kg Max. Tool Weight: 20 kg Max. Tool Length: 90 x 200 / 24 x 400 mm Max. Tool Diameter: Ø 130 mm Tool Taper: HSK 100 Numbers Of Tools In Magazin: 40 Tool Piece Magazine With: 140 Pcs./pcs. Spindle Turning Speed - Stepless: 14.000 RPM Max. Torque: 15000 Nm Rapid Traverse X-Axis: max. 60 m / min Rapid Travel Y-Axis: max. 60 m / min Rapid Traverse Z-Axis: max. 60 m / min Machine length: 7500 mm Machine width: 5500 mm Machine Height: 3500 mm Weight Of The Machine Ca.: 26 t Rapid traverse C-axis: max. 25 RPM Ibedpfox Hn A Tjx Ah Uof Rapid traverse A-axis: max. 20 RPM A-axis (swivel axis): - 30 / + 120 ° C-axis (rotary table axis): 360 ° Further information: - Horizontal machine, Y-axis arranged vertically - Machine stand designed as a welded construction - set up on height-adjustable precision wedge shoes, chip tray with cooling lubricant device, for external splash water cooling capacity: approx. 400 liters, with clean water pump, LP circuit, approx. 40 1/min at approx. 5 bar and rinsing nozzles on the Z-axis and/or the spindle - Complete safety housing - Stainless steel interior lining - Work area lighting - Manual loading door to the work area with polycarbonate safety window with glass front panel - Side viewing window to the work area with polycarbonate safety pane with glass front pane - Maintenance area freely accessible - HSK 100 hollow shank taper - Tool clamping via springs, tool release hydraulically - Tool clamping control - Cone cleaning - incl. spindle orientation

Condition: good (used), Year of construction: 2004, 5-axis CNC machining center – universal – Manufacturer: DMG Machine model: DMU 160 Control: MillPlus IT Year of manufacture: 2004 TECHNICAL DATA Travel distances - X-axis (mm): 1,600 - Y-axis (mm): 1,250 - Z-axis (mm): 1,000 - A-axis (swivel head): 0 degrees / 90 degrees - B-axis (rotary table): 360 degrees Iedpox Ey N Asfx Ah Uebf Spindle: Swivel milling head (H/V) - Internal coolant supply (ICS) (bar): 40 - Max. spindle speed (rpm): 10,000 Tool changer: Double gripper Tool magazine: Rack-type magazine - Tool holder: SK50 - Tool positions: 120 Machine table: Rotary table Pallet system: Rotary pallet changer - Number of pallets: 2 - Pallet size (mm): 1,250 x 1,000 EQUIPMENT FEATURES + Electronic handwheel + Chip conveyor + Coolant spray gun + Rotating viewing window + Operating mode 4 + Air blast through spindle center, selectable via M-function Subject to changes and errors in the technical data and information.

Condition: used, Year of construction: 2010, travel -x axis 630 mm travel -y axis 765 mm travel -z axis 600 mm control MAZATROL Matrix number of spindle speeds 18.000 U/min a-axis +30 ~ -120 ° c-axis +/- 360 max. working diameter 730 x 500 mm 0 500 mm numbers of positions in the tool changer 80 tool taper HSK 63T 5-axis simultaneous machining center | MAZAK - Variaxis 630-5X II T equipped with a rotary function (turntable) The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Iodpox Avtiofx Ah Uobf The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Variaxis6305XIIT | Variaxis 630 5X II T | Variaxis-630 5X II T

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). Iedpfx Aoxnixijh Ujbf The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system.

Year of construction: 1986, condition: good (used), Universal milling machine Fabr.KUNZMANN Type:UF 6 / 3 Bj.1986 with digital indicator Heidenhain spindle mounting : ISO 40 horizontal and vertical spindle speed : 50 - 2150 rpm feeds stepless : 0-1000 mm/min steps X / Y and Z 0-250 mm/min Ijdpfx Aheich Dvs Uobf Rapid traverse : 2000 mm/min X / Y and Z 500 mm / min table surface :860 mm X 265 mm tiltability + - 45 degrees Counter bearing, 2 milling arbors for horizontal milling. Machine Docs Available Good condition Ready for demonstration .

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 6 m/min, controller manufacturer: Heidenhain, controller model: TNC 426/430M, overall weight: 3,000 kg, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,292 h, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 16, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, This Deckel Maho DMU 50T comes from a training department and has therefore never been used as a production machine. The machine is accordingly in a very tidy condition, and both the axes and spindle still run very smoothly! Ibjdexzf Eropfx Ah Usf Equipped with Heidenhain electronic handwheel. Dimensions: 2200x2200x2300 mm (LxWxH) Weight: approx. 3000 kg

Year of construction: 1993, condition: good (used), CNC universal milling machine DMG MORI Type: MH 600 C Ijdpfx Aheiihxhe Uebf Control MAHO 532 year 1993. with automatic swivel milling head G17/G18 and B -axis rotary table. Without tool changer. Further data see data sheet. Complete machine documentation and data backup available. Good general condition.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Ijdpfx Ahoxw N Uvj Ujbf Modernized in 2013 with software Test force max.: 200 kN Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Year of construction: 2006, condition: good (used), Universal tool milling machine KNUHT type: WF 5 year 2006 with 3-axis digital indicator, stepless feeds, hydraulic tool clamping. Table size : 800 mm X 300 mm max. load 350 Kg. Travels : X/Y/Z 450/400/320 Spindle mounting : ISO 40 spindle speed : 63 - 3150rpm Iodpfsichr Sjx Ah Uobf Stepless feeds : 5-1250mm/min rapid traverse .1800mm/min Space requirement : 1,7m X 1,7m X 1,9m Weight.ca.1800Kg. Machine docs available ,machine demonstration ready undercurrent .