Used Universal Vertical Milling Machine for sale (66,287)

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Hodpfxow Edpts Aadjnh

Condition: ready for operation (used), Travel X/Y/Z: 800mm/400mm/440mm, table dimensions X/Y: 1285mm/355mm, quill stroke: 130mm, weight: approx. 2100kg. An on-site inspection is possible. Hodpfx Ajx Hz Rwjadsnh

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Hnedpfxjulku He Aadoh

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Hnedpfjw Tc Nyjx Aadsh

Condition: ready for operation (used), Year of construction: 2019, X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much. Hnsdpfev Hndfsx Aadjh

Year of construction: 2006, condition: ready for operation (used), A versatile and robust Arsenal double-spindle universal milling machine with milling head is available. Table dimensions X/Y: 1350mm/320mm, table tilt: +/-45°, travel X/Y/Z: 1000mm/360mm/460mm, automatic travel X/Y/Z: 980mm/340mm/440mm. Horizontal spindle table distance: 30mm-490mm, vertical spindle table distance: 170mm-630mm, spindle mount: ISO50, speed: 2000rpm, feed X/Y/Z: 1000mm/min/415mm/min/415mm/min, rapid traverse X/Y/Z: 2500mm/min/1040mm/min/1040mm/min. Machine dimensions X/Y/Z: approx. 2800mm/3100mm/2000mm, weight: approx. 3500kg. On-site inspection is possible. Hodpfx Aaov Rp Rzedjnh

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible. Hsdeuzlfmspfx Aadenh

Condition: ready for operation (used), Year of construction: 2019, A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Hnsdpjvf Iy Dsfx Aadjh

Condition: good (used), Year of construction: 2007, Internal item no.: 26009 You are welcome to inspect the machine under power on over 500 m² of heated storage area. Universal Milling Machine Intos FN20 Year: 2007 + 3-axis digital readout + Hydraulic machine vice + Operating manual + Machine lamp + Coolant pump Travel: X 300 / Y 200 / Z 350 mm Hedpfx Aeyg Dk Ssadjnh Spindle taper: SK40 Speed range: 50 - 2500 rpm Clamping area of milling table: 240 x 600 mm Feed rate: 8 - 400 mm/min Rapid traverse: 1340 mm/min Dimensions (LxWxH) approx.: 130 x 150 x 190 cm Weight: approx. 1000 kg The machine comes from an educational institution and is in well-maintained condition.

Condition: used, Year of construction: 1979, table longitudinal travel / mm cross travel / mm Hsdpjuddp Hefx Aadsnh vertical movement / mm incl. vice Table dimensions: 1300x400mm The machine is sold without accessories.

Condition: new, Year of construction: 2026, 0760 mm 450 mm 500 mm 900x450 mm BBT 40 Hnsdpfxox Urt Se Aadoh 10.000 U/min Motor Capacity 7,5/11 kW max. table load 850 kg

Condition: new, Year of construction: 2026, 0550 mm 410 mm 480 mm 650x410 mm Hnedpfx Aex Urt Esadeh BBT 40 10.000 U/min Motor Capacity 7,5/11 kW max. table load 500 kg

Condition: new, Year of construction: 2026, 1100 mm 650 mm 610 mm 1200x6000 mm BBT 40 12.000 U/min Motor Capacity 7,5/11 kW max. table load 1300 kg Hsdpfxsx Urtxe Aadsnh

Condition: refurbished (used), Year of construction: 2000, KEKEISEN Universal Bed Milling Machine UBF-R 2000/13, machine no. F42460; year 2000 well maintained, very good condition, mechanically overhauled 2023 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Transverse travel of the headstock (Y-axis) 1200 mm Vertical travel of the headstock (Z-axis) 1300 mm Rotary table size 1260 x 1260 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 4000 kg Hedpfxerm Sigo Aadenh Spindle power 30 kW (100%ED), max. torque 1200 Nm Spindle speed 20 - 4000 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 12 m/min rapid traverse CNC control Heidenhain TNC 426M with electric handwheel HR 410 Drive systems make Siemens Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 270 litre collecting tank Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 50 kVA without installation elements (fixators), without assembly and commissioning Price: on request, plus VAT Pricing: ex works, delivery time: short term by agreement

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: F39033, KEKEISEN Universal Bed Milling Machine UBF 2000/13, machine no. F39033; well maintained, very good condition, mechanically partly overhauled in 2025 2-axis universal head automatically swivelling, with locking in Hirth coupling Intermediate positions adjustable in 1° steps by jog mode SK50 tool holder according to DIN 69871/872 Longitudinal travel of the table (X-axis) 2000 mm Hsdpfx Aoykuxhsadjnh Transverse travel of the headstock (Y-axis) 1000 mm Vertical travel of the headstock (Z-axis) 1300 mm Machine table size 2200 x 960 mm, with T-slots 22 mm, spacing 140 mm Rotary table rotation 360° (stepless, with clamping) Rotary table load 5000 kg Spindle power 30 kW (100%ED), max. torque 1180 Nm Spindle speed 20 - 3800 rpm (infinitely variable in 2 ranges), with oil cooling Axis speeds 4 m/min or 10 m/min rapid traverse CNC control Heidenhain TNC 426 CA with electric handwheel HR 330 Drive system make Baumüller Coolant system with inner cooling up to 16 bar. Air/water changeover Purolator double-switching filter with 200 litre collecting tank Tool changer for 30 tools Work area panelling all round, open at the top, with longitudinal chip conveyor Connection data 400 V; 50 Hz; approx. 55 kVA without installation elements (fixators),

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 Hsdpfx Aeygv Upjadonh The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Hsdpeygv Shefx Aadenh Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: good (used), Year of construction: 2008, feed length X-axis: 400 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, Heidenhain TNC 124 control quill electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 400 mm Querweg (Y-Achse) / Y-travel cross 250 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Hodperb A Tcsfx Aadonh Tischaufspannfläche / table clamping area 600 x 320 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 30-6300 UpM Vorschub x,y,z / feed x,y,z 10,10,8 m/min. Antriebsleistung gesamt / drice capacity 6,5 kW Gewicht ca. / weight ca. 1200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Hedeit Tr Tjpfx Aadsnh Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 3,000 mm, - CNC control Heidenhain TNC 415B - controlled 2-axes NC-milling head 2,5° - coolant device The machine will be sold without the plate field Accessories: ca. 20 pieces tool tapers DIN 2080 with bolts DIN 69872 some spare parts like bevel gears for the milling head and ball screw for X-axis. Technische Daten / technical details: Verfahrweg X längs / X-travel longitudinal 10000 mm Hsdpewrzkzsfx Aadonh Verfahrweg Y quer / Y-travel cross 1500 mm Verfahrweg Z vertikal / Z-travel vertical 3000 mm Werkzeugschaft / spindle taper SK50 Drehzahlbereich (2-stufig) / spindle speed (2-steps) 35-3000 UpM /rpm Vorschub / infeed 6-10000 mm/min Eilgang X,Y,Z / rapid feed X,Y,Z 10, 15, 10 m/min Antriebsleistung Hauptmotor 100%ED / drive capacity main motor 100%ED 37 kW Gewicht der Maschine ca. / weight 39300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out Hjdpfxswyit Hj Aadenh horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1997, Universal milling and drilling machine Manufactured by KUNZMANN. WF 7/3 Year of manufacture: 1997 Technical specifications Make: Kunzmann Type: WF 7/3 Year of manufacture: 1997 X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Clamping surface: 800 x 425 mm Hnodpfswhm Sijx Aadjh Clamping slots: 6 Slot spacing: 63 mm Max. load: 250 kg Tool holder: SK 40 Quill stroke: 60 mm (vertical) Head can be swiveled 90° to both sides Drive power: 4 kW Dimensions: approx. L 2.0 x W 2.0 x H 2.0 m Weight: approx. 2.0 t (including control cabinet and swivel panel) Equipment - Heidenhain TNC 124 control - Operating instructions - Enclosure - Coolant system - Hydraulic tool clamping All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2001, x-travel 2000 mm y-travel 920 mm z-travel 900 mm table surface area 2200 x 750 mm table load 3 t number of T-slots 6 T - slots - width 18 mm T - slots distance 120 mm spindle taper ISO 50 DIN 69871-B spindle speed max. 3000 U/min transmission ratio 1 speeds infinitely variable range 1 60 - 3000 U/min weight of the machine ca. 21,6 t feeds longditudinal/cross/vertical 0 - 5000 mm/min rapid traverse 15000 mm/min total power requirement 38 kw weight of the machine ca. 11 t Pull studs DIN69872-B | IKZ Hnjdog E Utxspfx Aadsh Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled

Condition: used, Year of construction: 2007, x-travel 480/500 mm y-travel 230/250 mm z-travel 380/400 mm speeds 45 - 2240 U/min table surface area 1000 x 250 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 3 kW weight of the machine ca. 1550 kg Hnodpfet Tqw Dex Aadsh dimensions of the machine ca. 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual

Condition: used, x-travel 400 mm Hnodpfx Aaoxqrdtedsh y-travel 200 mm z-travel 400 mm No. of spindle turning rate 18 speeds 40 - 2000 U/min table surface area 730 x 240 mm tool adaptor SK 40 flute distance 4 / 12 mm number of feeds 18 feed range 8 - 400 mm/min rapid traverse 1200 mm/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1700 x 1400 x 1700 mm - Robust/powerful universal milling machine - NEWALL digital display - Coolant device