Used Upa 4 for sale (60,539)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Kwjdpfx Ahsfdkb Tozst - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Kwjdpod Tqaljfx Ahzst - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Kwedpfx Ahoguk A Hozet Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Kwodpsfdkb Usfx Ahzot

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm Kwsdeguk Dkjpfx Ahzot - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: Kwodofdkbhepfx Ahzjt - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. Kodjguk Dvopfx Ahzewt When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Year of construction: 2020, 1. WEISCHAUPT WM-G10/4-A (with gas line) - Power: 100-1100 kW - Model: ZM-LN - Year of manufacture: 2020 Kwjdpfx Aowgyrtjhzst 2. WEISCHAUPT WM-G10/3-A (with gas line) - Power: 100-1000 kW - Model: ZM - Year of manufacture: 2013

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train Kjdpfxowgym Ds Ahzjwt - Power: 110-1250 kW - Year of manufacture: 2011 - Design: ZM

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads Kodsl Dw Nxjpfx Ahzewt long table going 3 meters. Machine weight 5500 kg cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Year of construction: 1980, condition: used, Sharpening TOOL VOLLMER FINZ 4-800 Location Gorzow Wielkopolski. Conditions of delivery Pick your own Ksdpfx Aocw Dg Dshzowt Cost of delivery Client cover startup type negotiated Description Comments GRINDING AUTOMATIC CIRCULAR SAW WIDIOWYCH THE HYDRAULIC

Condition: good (used), For sale: individual pieces of original deep hole drilling bits by Botek (Germany) – a renowned manufacturer of precision tools for metalworking. Single-lip drills (single-edge) with internal cooling, made from K15B carbide – very hard and wear-resistant. Kodpjwg R I Ejfx Ahzowt • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B carbide (ultrafine grain) • For steel, stainless steel, aluminum, bronze, and engineering plastics The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulic industries, and toolmaking. Condition: New and used (pre-owned), but in good technical condition. Some items may require resharpening – an ideal base for professionals. //// PRICE SHOWN IS PER PIECE ////

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, clear span: 2,000 mm, total length: 1,104,730 mm, total width: 2,000 mm, total height: 8,500 mm, load per truss pair (max.): 2,100 kg, load capacity per storage section: 12,000 kg, number of shelf rows: 22, product height (max.): 2,000 mm, mesh size: 50 mm, hole spacing: 50 mm, shelf height: 8,500 mm, pallet spaces: 12,500 euro pallets, STOW pallet racking – immediately available | Block pricing | carriage paid (block) | installation Immediately available STOW rack blocks from dismantling – uniform configuration, excellent condition, fast delivery. Block purchase: carriage paid, EU-wide installation. Key features: Block A now, Block B ~3 weeks “Finished Goods” rack: ~2,000 mm deep, ~8,500 mm high, beams 2,700 / 1,800 mm Large stock of accessories: mesh decks, back mesh, anti-push-through, DSS holders Block pricing vs. single items • free delivery on block purchase Installation & hand-over by our team • Load signage on request Condition: very good industrial, dismantled & sorted Specs (short): Uprights: STOW PNUPA 12, 8,500 mm (85×65×1.75 mm) Beams: STOW PNB 0488, 80×50 mm, L = 2,700 / 1,800 mm Depth: approx. 2,000 mm • Typical bay examples on request Accessories: mesh decks (deep supports), back mesh, anti-push-through, safety locks, frame connectors, row spacers Kwjdpfexpu R Tjx Ahzjt Available per block (approx.): 216 uprights 8,500×1,000 PNUPA 12 • 216 additional uprights 2,850 beams 2,700 mm PNB 0488 • 90 beams 1,800 mm PNB 0488 2,950 mesh decks • 50 lm back mesh (8,500 mm high) 605 anti-push-through • 1,210 DSS holders • 1,463 row spacers (1,000 mm) 3,040 safety locks/clips • 228 frame connectors (short) Services / options: EU-wide transport (block purchase: carriage paid) Installation incl. anchoring, leveling & hand-over report Layout planning, structural verification, load signage Cleaning/repainting, spare parts Commercial terms: Payment: 30% down · 30% upon loading · 40% after delivery completion Prices: excl. VAT • Reservation possible with down payment • while stocks last Condition & inspection: Dismantled & sorted; visual inspection via photos/video available. Share your destination and desired option (Block A/B/both) – we’ll send an immediate block quote (€/pallet position installed) and reserve a delivery/installation window.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 34,000 mm, shelf height: 3,500 mm, support length: 2,700 mm, shelf length: 8,500 mm, frame height: 3,500 mm, load per truss pair (max.): 3,000 kg, frame width: 1,100 mm, number of shelf rows: 4, pallet spaces: 108 euro pallets, 4 rows of pallet racks (4 x M35112711-2) each 8.5 m long, 3.5 m high, 1.1 m deep, each with 3 bays, 2.7 m wide, each with 2 beam levels, shelf load 3000 kg. - 16 frames (RM3511 - RAL5019) - 32 base plates, shims, screws - 64 floor anchors (ZZBA1210) - 48 individual beams (T27114 - RAL2008) - 4 load plates (BSMcP) Frames bolted, not pre-assembled Kwodpsv Ukz Ajfx Ahzot Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment. - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Kwedpfxjp U Umke Ahzst

Condition: ready for operation (used), functionality: fully functional, mileage: 800,000 km, power: 294.2 kW (400.00 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 10,000 kg, maximum load weight: 34,000 kg, overall weight: 44,000 kg, tire size: 315.80 r 22.5, axle configuration: 4x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, Year of construction: 2011, Equipment: ABS, air conditioning, airbag, crane, differential lock, onboard computer, parking heater, trailer coupling, scania R400 tractor, 2 AXLES, 4X2, YEAR 2011, manual transmission with retarder, approx. 800,000 km, single tank, euro 5, air suspension, ebs, medium-high cabin with double bed, radio, cd, fridge, webasto, summer climate control with vehicle stationary, Palfinger crane mod. 18002 eh, hydraulic stabiliser feet, radio control for crane, excellent condition, inspected until 04/30/2026, INTERDRIVE SRL-PARMA DEALER Kwjdpfx Aewfhkzshzot

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES. Kodpoxwnw Aefx Ahzowt

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Kwsdpfx Aeulah Njhzet Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: excellent (used), Year of construction: 2007, Twin drum spiral hot air oven direct from closed McD factory, this was used for pre-cooking burgers and nuggets. These machines are built for the high capacity cooking, grilling and steaming of a wide range of products, the degree of cooking, grilling or steaming is determined by the air temperature, the air speed, the air humidity and the time that the product is in the system. Kwsdsx Altfjpfx Ahzet Electrically heated. 96m x 600mm belt. Was in use from 2007 until 2016 when the contract moved to another factory. Machine is in lovely condition, we also have everything else used in the factory - formers, fryers, coating machines, filters, spiral freezers, bagging lines etc. Please note that the photos probably show two different ovens, both are very similar.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Ksdpfexwzbzsx Ahzewt Weight: 10 570 kgs

Condition: good (used), Ibex Pump Lobe pump Model: SR/4 Ksdpfx Ahof Ecr Sjzowt Serial: 930590/01 Stainless lobe pump on frame, 50mm inlet and outlet pipe, 3Kw motor, 3Ph

Condition: good (used), mileage: 435,875 km, power: 279 kW (379.33 HP), first registration: 05/2011, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Double wheels; Suspension: air suspension Rear axle 2: Lift axle; Steering; Suspension: air suspension Kwsdsycqp Tjpfx Ahzjt Weights Empty weight: 11.940 kg Carrying capacity: 14.060 kg GVW: 26.000 kg Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: good (used), mileage: 629,309 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2019, Equipment: AdBlue, EBS, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, power mirror, second fuel tank, Technical information Number of cylinders: 6 Axle configuration Brakes: disc brakes Front axle: Steering; Suspension: leaf suspension Rear axle 1: Lift axle; Steering; Suspension: air suspension Rear axle 2: Double wheels; Suspension: air suspension Weights Empty weight: 9.040 kg Carrying capacity: 16.660 kg GVW: 25.700 kg Kwjdpjycifmofx Ahzjt Condition Technical condition: good Visual appearance: good Additional information Please contact Arie or Pedro for more information

Condition: ready for operation (used), total height: 1,915 mm, total length: 2,500 mm, total width: 1,290 mm, throat depth: 400 mm, empty load weight: 950 kg, nominal power: 6 kW (8.16 HP), Rond materiaal: Ø 400 mm Rechthoekig: 400 x 400 mm Maximaal materiaalgewicht: 1000 kg/m Snijsnelheid: 20 tot 110 m/min Afmetingen zaagblad: 5090 x 41 x 1,3 mm Hydraulische klemming spaantransportband Max height of workpiece: 400 mm Sawspeed: 20-110 m/min Length of band saw: 5700 x 41 x 1.3 mm Kwodoxpymajpfx Ahzet

Condition: good (used), mileage: 703,408 km, power: 427 kW (580.56 HP), first registration: 10/2020, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,100 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,480 mm, total width: 2,550 mm, total height: 3,950 mm, Year of construction: 2020, Equipment: ABS, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, traction control, - 2nd diesel tank - Digital tachograph - Tachograph (monitoring device) Kwjdpfx Aox I Af Ejhzot - Fixed - Highline - Alloy wheels - Additional braking system Number of axles: 3, Configuration: 6x2, Curb weight: 9,694 kg, Gross weight: 26,600 kg, Total tank capacity: 715 liters, 2nd diesel tank, fifth wheel height: 121 cm, fifth wheel: fixed, Number of differentials: 1, alloy wheels, Suspension type: air suspension, Cab type: Highline, Cruise control, Tachograph (monitoring device), digital tachograph, parking air-conditioning, auxiliary heater, electric windows, electric mirrors, radio/cassette, CarPlay, GPS navigation, Color: white, heated mirrors, lighting: LED lamp, lane keeping assistant, air conditioning, seat heating, Bluetooth, Engine power: 427 kW (573 hp), Fuel: diesel, Euro: 6, Transmission type: Opti-cruise, Gearbox brand: Scania, Gears: 12, additional braking system, retarder brand: Scania, power steering, ABS, ASR, starter battery, central locking, Seat arrangement: 1+1, seat material: leather, seat adjustment: manual, S 580 A 6X2/4 NA / ALCOA'S / LEATHER / LED / NIGHT AIRCO Transmission Transmission: SCA, 12 gears, automatic Axle Configuration Brakes: disc brakes Axle 1: Tire size: 385/55R22.5; steered; left tire tread: 7 mm; right tire tread: 6 mm; suspension: leaf spring Axle 2: Tire size: 385/55R22.5; lift axle; steered; left tire tread: 6 mm; right tire tread: 6 mm; suspension: air suspension Axle 3: Tire size: 315/70R22.5; twin tires; left inner tread: 6 mm; left outer tread: 6 mm; right inner tread: 5 mm; right outer tread: 9 mm; suspension: air suspension Weights Unladen weight: 9,694 kg Payload: 16,906 kg Gross combination weight: 26,600 kg Maintenance APK (periodic technical inspection): valid until 08.2026 Condition Technical condition: good Visual condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €1,235 per month (default, 72 months); Please ask for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European brands, model years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good value • Proper business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Ask us directly about our European warranty package.