Used Uv Curing for sale (1,144)

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Hedpfxju Afz Re Abvjfd

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Hedpfsww Iu Rox Abvefd

Condition: ready for operation (used), Year of construction: 2014, Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and rewinding, air shaft clamping pneumatic, clamping releasable to allow rotation of the winding mandrel, max. roll diameter for unwinding and rewinding: 610mm, max. roll weight for unwinding and rewinding: 120kg. power consumption: approx. 39kVA/60A, air consumption: 100NL/min, cooling capacity: approx. 60.000BTU/h =18kW, data interface: USB2.0, Ethernet, data format: PDF-X1 or X3 or EPS or AI, length: 4550mm, width: 1750mm, height: 2200mm, weight: approx. 3t. With documentation, chiller unit and inks. The machine is fault-free, complete and ready for operation, and has been serviced regularly. On-site inspection is possible. Hjdpfx Ajxz Ewnsbvefd

Condition: ready for operation (used), A 4-color central cylinder printing system WDB Systemtechnik is available. Printing units: 4, ink type: UV, max. material width: 650mm, max. printing width: 600mm, printing length range: 300mm–800mm, max. printing speed: 250m/min, material types: PET/OPP/aluminum/laminate/composite materials, material thickness range: 20µm–150µm, max. unwind and rewind roll diameter: 1000mm, operating hours: 28h, printed length: approx. 57000m. System components: unwind and rewind unit, corona, UV dryer, drying channel, IR heater, cooling unit, and supply and exhaust air fan. Including lamination unit. Documentation available. An on-site inspection is possible. Hfjdoxmkctepfx Abvod

Condition: repair required (used), Year of construction: 2017, operating hours: 15,939 h, functionality: limited functionality, machine/vehicle number: R678B751, number of ink cartridges: 8, color channels: CMYK, number of print heads: 2, I am offering for sale a flatbed plotter Mimaki JFX200-2513. Working area: 1300x2500 mm 2 print heads Hfedoxzpvzepfx Abved Currently, the machine is loaded with 2xCMYK; conversion to CMYK+W+C is possible. Low usage: 4916 m2 The machine has mechanically damaged print heads. Printing is possible, but banding starts to appear relatively quickly.

Condition: excellent (used), Year of construction: 1999, operating hours: 130 h, HEIDELBERG CD 102-6+LX UV ref 2969 year of production 1999 only 135 million counter Straight 6 Colour with Coater & Extended Delivery (UV & IR Drying), Max Sheet Size 720 x 1020mm, CP2000 Off Press Controls, Autoplate & Preset, Alcolor Vario Dampening, Technotrans Refrigeration, 4 IST UV Interdeck Positions between Units 1&2, 2&3, 4&5 and 6&L, 3 x Interdeck IST UV Lamps, 3 x End of Press IST UV Lamps, End of Press IST IR Drying, Tresu Chambered Doctor Blade with Anilox Roller, Automatic Ink Roller, Blanket & Impression Cylinder Wash, Technotrans Inkline Auto. Inking, Non Stop Feeder & Delivery with Steel Plates, Hfedpfx Ajytvaljbvod Grafix Powder Spray Device

Condition: used, This listing is for 1 of 3 Millipore Rios-DI UV Water Puerification System RiOs-DI® 3 UV Water Systems with built-in 254 nm bactericidal UV lamp easily and economically produce up to 15 L/day of consistent-quality Type 2 pure water from tap water. A combination of reverse osmosis (RO) technology and deionization (DI) resins delivers water with high resistivity ( > 10 MΩ·cm) and low TOC (< 30 ppb) whose quality surpasses that of service DI or distilled water UV lamp helps ensure optimal water quality for bacteria-sensitive applications Pure water flow rate of >2.4 L/hr Integrated 6-L storage reservoir Avoid the drawbacks of other purification methods such high lab space demands for resin bottles or distillation equipment; heavy maintenance; lack of quality monitoring; and in the case of distillation, high energy and water use Hfjdpfxoxzhcme Abvod

Year of construction: 2021, condition: used, Manufacturer : Thémis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Laser : keyence mdu1000C Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A Bofa Ad Access vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control computer, ... Hsdpfsx R Aqtex Abvofd Documentation, drawings, backup, software available.

Condition: like new (used), Serial: 26557-PO1 Hsdpfxohxyq Es Abvsfd Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, laser power: 20 W, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 Watts Demonstration machine, with minimal operating hours (approx. 15 hours) - incl. Windows 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German Hfodpfx Abeflrnaovod - 3D software (MM3D) - very easy to operate - switch on and start working - UV laser source with 20 Watts for high-contrast and fast marking with extremely high resolution - suitable for engraving almost all metals (stainless steel, brass, aluminium, etc.) - suitable for engraving almost all plastics (including PVC, silicone, etc.) - suitable for engraving real glass (including crystal glass) - capable of cutting real glass - heavy-duty industrial quality - complete system / ready for immediate use - working area approx. 500 x 600 x 600 mm (W x D x H) - clamping surface with threaded inserts on a 50 mm grid - LED workspace lighting - 50 mm duct connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (switchable) - 3D scanner for marking surfaces of any shape - incl. foot pedal to start the engraving process Sale to businesses only. Delivery / consulting / sales only within Germany / Austria / Switzerland. Please also ask about our attractive leasing/financing options. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 150 kg

Year of construction: 1985, condition: ready for operation (used), Compressed air connection: 6 bar, connected load: 0.75 kW, can be inspected on site. Hfedpfx Abeq Ikawsvsd

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Hfsdpfx Aehlp Efobvsd

Condition: used, Item: LC-13470-UV-Clean Industrial UV Treatment System – Complete Unit Complete industrial UV treatment system for non-thermal processing of liquid products. Suitable for juice, beverage, food, and process water applications. - Stainless steel UV reactors - UV power & control unit included - Food-grade, hygienic design - Continuous inline operation - Preserves taste and product quality Main Components: - Stainless steel UV reactors (inclined design) - UV lamp housings with quartz sleeves - UV power & control unit - Electrical cabinets and control panel - UV lamps, cables and accessories (included) Technical Features: - Food-grade stainless steel construction - Non-thermal UV treatment - Continuous inline operation - Hygienic design, easy to clean and service - Suitable for integration into existing production lines Hfodpfxsx It Rfj Abvsd Condition: Good, dismantled and stored on pallets Availability: In stock, ready for delivery

Condition: good (used), Year of construction: 2009, functionality: fully functional, Including: • Max. plate size: 940 x 1150 mm • 2 x DMD laserheads • Speed up to 21 plates per hour at 2400 dpi • 1 bit tiff loader • Multi cassette loading Hedpsyf Eglsfx Abvjfd • Plate count 251.000 • Extra spares: 1 x Laserhead, boards, punch • Printing plates stock included

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Hfodsxdl Ixjpfx Abvsd Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Year of construction: 2001, condition: good (used), 1 used hardening furnace Manufacturer: Nabertherm, Type N 321 Serial Number: 160897, Year of manufacture: 2001, Max. temperature: 1,200°C, Connected load: 400V, 47 kW Internal dimensions: 750 x 1100 x 400 mm Usable volume: 320 liters Hfedpfxexpf I Ne Abvod Weight: approx. 1.6 t Dimensions: Length approx. 2 m, width approx. 1.5 m, height approx. 2 m,

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) Hfsdpfx Abjx E T Uxsvod We are happy to answer further questions by phone.

Condition: used, Hardness testing device, hardness measuring machine, hardness tester, hardness tester Hedpjb A Rkvsfx Abvsfd -Hardness tester: according to Brinell and Rockwell Accessories are missing and therefore it is sold as defective. -Handover in its current condition as inspected -Dimensions: 600/220/H660 mm -Weight: 92 kg

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, number of ink cartridges: 6, total length: 1,700 mm, total width: 3,100 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 760 kg, working width: 1,600 mm, energy consumption: 4 kWh, product height (max.): 100 mm, table length: 1,000 mm, table width: 1,640 mm, Equipment: cooling unit, documentation/manual, Large Format Flatbed LED UV Printer The SIGNRACER 1610 is a reliable and versatile flatbed printer designed for industrial-grade production. Equipped with either Ricoh Gen.6 printheads, the printer offers excellent adhesion on various substrates, making it an ideal choice for printing on both dark and transparent surfaces in a single pass. Its LED UV curing system offers variable power levels and is air-cooled, providing a long lifespan and excellent performance. With its high-quality construction and advanced features, the SIGNRACER 1610 is a top choice for a range of industrial printing applications. It is ideal for producing high-quality graphics on both dark and transparent surfaces with its White and Gloss inks, in addition to CMYK process colors. Its ability to print on rigid and flexible materials such as PVC boards, Aludibond, PS, PP, Acrylat, PET-G, and Glass makes it perfect for printing signs, displays, and exhibition graphics. Ricoh's smaller drop print heads are suitable for special applications that require higher precision, such as watch faces and industrial components. Signracer also develops its own waveforms and inks, allowing for even higher print output and top quality at maximum printing speeds without compromise. This ensures a perfect match between our ink formulations and waveforms, especially in grayscale printing. Specifications Printhead - Ricoh Gen.6 Printhead Count - 4 Printbed Size - 1600 mm x 1000 mm Carriage Speed - Ricoh Gen.6: 1.26 m/s Hfodpfx Absunw Eqsved Vacuum Table - 2 Honeycomb zones with registration pins Dimensions (H x W x D) - 1300 mm x 3100 mm x 1700 mm Weight - 760 kg Energy Consumption - 4 kW Max. Media Width - 1640 mm Max. Print Width - 1600 mm Media Type - Rigid and flexible (PVC Boards, Aludibond, PS, PP, Acrylat, PET-G, Glass) Media Thickness - Maximum 100 mm Curing System - LED UV with variable power levels LED UV Lamp - 90 mm / 14 Watt/cm2 Color Configuration - CMYK + White + Varnish Ink Consumption - Ricoh Gen.6: 8 ml/m2 Draft (4 passes, 600x900 dpi) 26 m2/h Production (6 passes, 600x900 dpi) 20 m2/h Quality (9 pass, 600x900 dpi) 15 m2/h

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Hedpet Dx U Ssfx Abvsfd Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: like new (used), Year of construction: 2022, For sale: EXILE prepress system – complete set: CTS imaging unit and UV LED exposure cabinet. Devices from mid-2022. Printhead replaced in 2025. After that, used very little. Hfsdpfxexb Ru Eo Abvod 1. Computer to Screen – EXILE Spyder II DTS 30″ • Serial number: 900 100523/182 • Production date: 07/2022 • Version: DTS 30″ • Pin registration: MHM • Included: 1× Screen Drum • New printhead: 2025 2. Exposure cabinet – EXILE V LUX UV LED Exposure Cabinet • Serial number: 450 • Production date: . RIP software • SCREENMAKER RIP Kit (for Windows systems)

Condition: ready for operation (used), Heidenhain UV 105 ID. 344 980-13 SN13442060, professionally fully overhauled and tested with 3 months warranty, 100% functional, scope of delivery as per photos, used, in good condition, 100% functional, delivery contents as shown in photos. Hfodpex Eti Nefx Abvod

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 105, part number 344 980-13, serial number: 1334360, offered on an exchange basis (Exchange service). The unit has been professionally overhauled and fully tested, comes with a 3-month warranty, and is 100% functional. Scope of delivery as shown in the photos. Please note: Under the exchange procedure, your defective return unit must not have any mechanical damage such as fractures or breaks, as these cannot be repaired. In such cases, an additional charge of €400 incl. VAT will apply. Hfjdpfx Aox Etkyobvod

Condition: ready for operation (used), You are bidding on a Heidenhain UV 105 Inverter, part no. 344 980-13, serial number 13442060, offered in exchange (exchange service). The unit has been professionally overhauled, fully tested, and comes with a 3-month warranty. It is 100% functional. Scope of delivery as shown in the photos. Attention: Hsdpox Etk Hefx Abvefd In the exchange process, your returned defective part must not have any mechanical damage, such as breakage, as these are beyond repair. In such cases, an additional charge of €400 incl. VAT will apply.

Condition: ready for operation (used), Heidenhain UV 105, 344 980-13, serial number: 12004785, provided in exchange (exchange service). Hodpfxex Etlde Abvsfd Professionally fully overhauled and tested, comes with 3 months warranty, 100% operational, delivered as shown in the photos. Attention: In the exchange process, your defective return part must not have any mechanical damage, such as fractures or breakages, as these cannot be repaired. In such cases, an additional charge of 400 EUR (including VAT) will apply.