Used Various for sale (5,518)

Condition: used, Year of construction: 2018, Overview  The offered filling line for pouch bags was designed by a Swiss company and also delivered by them in 2018. The main manufacturer is Linapack. The line was only used for seasonal production only (2 months a year), therefore the working hours are very low. As the sales volumes are not further increasing, the seller decided to sell the line and stop the production. The line is still assembled and can be shown. It is possible to handle different formats of pouch bags and to do hot filling up to 85°C. The current owner used it for Cocktails but it can also be used for various other non carbonated drinks. Tech. Details Capacity: 50 bags/ hour, depending on the volume 750 -900 l/h Bag dimensions Width: 80 - 180mm Height: 100 - 300mm Filling temperature: 71 - 85 °C Siemens PLC Line consists of  1,000 l buffer tank agitator Flow meter Level detection Cleaning spray ball Integrated into pasteurizer control system Flash pasteurizer Kreuzmayr PAS-900 Capacity: 750 - 1,000 l/h Heated with steam Fully automatic Automatic cleaning with Hot water steam acid caustic With tubular heat exchanger Automatic filler Linapack LFS-1000 Duplex with Siemens PLC Seven Station system motorized magazine with pick and place system to supply pouches Opening of the pouches with vacuum gripper Filling unit with flow meter and temperature sensor, automated rejection, if temperature is too low Sealing of pouches Sealing of pouches Cooling of the seal Pouch discharge Check weigher Cooler and dryer for pouches Cooling in water bath With UV lamps for desinfication Drying by blower, five nozzles Conveyors and collection table Njdpevptt Rjfx Ahzjkt

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 mobile CIP units Tank capacity: 100 L (alkaline + acid) Canning Line (Wild Goose GOSLING, 2021) Semi-automatic Formats: 0.33 L / 0.44 L / 0.50 L Cooling (Quantor Chilly MAX 50L) Glycol chiller for CCTs General Key Information Power supply (various units): 230–400V, 50 Hz Applications: Brewing, fermentation, can filling Scope of Delivery  Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) Water tank | ROTH | — | — | 2× 750 L Malt mill | Sommer | Maltman 220 | — | Precision mill Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis Nodpfx Ahoyb R Iaszokt

Condition: used, Year of construction: 2021, Overview This automatic self-adhesive labelling monoblock was manufactured in 2021 by the Italian company ENOS. The ENOS S5000 is designed for high-precision labelling of bottles and cans using pressure-sensitive (self-adhesive) labels and is suitable for producers requiring up to 5,000 bph. The machine is stored in good condition and immediately available. Technical data  Capacity: Up to 5,000 bph (single label) Formats: Glass bottles & cans; various diameters adjustable with included accessories Dimensions: 2,850 × 1,500 × 2,000 mm Weight: 450 kg Labelling type: Self-adhesive (pressure-sensitive) Label positions: Front, back, neck (up to 3 stations) Power supply: 2 kW Transport: Motorized infeed & outfeed tables Controls: Standard electronic speed variator; optional touchscreen Scope of Delivery Automatic self-adhesive labelling monoblock Up to 3 labelling stations (front/back/neck) Motorized infeed and outfeed tables Two transparent-label adapters Nkjdpeyb S Twefx Ahzot

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Nsdsl Hx Rpspfx Ahzokt

Condition: used, Year of construction: 2008, Overview  The filler and capper block was manufactured in 2008 by the Italian company CFT. This machine can be used to fill edible oil into various containers (PET bottles or aluminum canisters).  Techn. details  Filler | CFT | RVAR 6/10 | 2008  Filling temperature: 10-30°C  Number of filling stations: 6  Processable formats:  Tinplate canisters: 1l, 3l, 5l PET bottles: 1l, 2l, 3l, 5l, 10l  Output:  3,500 bph - 1L PET Filling opening. 20 mm 3.000 bph - 2L PET with filling opening 28 mm 2,500 bph - 3L PET with filling opening 32 mm 2.500 bph - 5 L PET filling opening 40 mm 2,200 bph - 5 L perforation 32 mm 1,100 revolutions per hour - 10 L PET hole 40 mm Filling accuracy 1 σ = 0.6 g Machine pitch diameter 720 mm Machine pitch 377 mm Max. diagonal treatable container 220 mm Max. height of treatable container 460 mm Capper | CFT | TA / 3 | 2008  Application of plastic caps  Machine pitch 377 mm Diameter 360 mm Number of capping heads 3 Including feeder for the capping heads Nkodpfomrpv Djx Ahzot

Condition: used, Year of construction: 2012, Overview The Heuft InLine IXs reflexx is an empty bottle inspector for quality control in filling lines. The machine was commissioned in May 2012, is in very good condition and is ready for use at short notice. Technical details  Output: Up to 46,000 bottles/hour Control system: Heuft Synchron TX Network: Heuft Hlan, incl. gateway Licensing: 5 type licenses Equipment: Software wizard for troubleshooting and container changeover Availability: Ready for use at short notice Missing components Thread blow-off (must be added if required) Controls  Monitoring of the incoming bottle flow (optional) Output of a stop signal in the event of incorrect bottle dimensions Inspection of the bottle base, mouth sealing surface and thread Inspection of the inner and outer side wall Detection of conductive liquids (e.g. lye) and residual liquids (oils, paints) using IR technology Rejection of faulty containers or output of a rejection signal Scope of delivery  Spectrum TX conveyor control unit Measuring bridges for inlet control and rejection with height adjustment 2 x Delta K rejection units Air conditioning unit Various spare parts (pulleys, belts) Documentation and training documents (German) Transponder for test bottles Nodpfx Aju Scr Sehzokt

Condition: used, Year of construction: 1998, Overview This carton packing line was manufactured in 1999 by the French company SAVOYE. The line has been professionally dismantled and is currently stored in a closed warehouse. It is designed for the packing of beer and carbonated beverages into various carton configurations and includes all necessary conveyors and technical documentation. Technical data Manufacturer: SAVOYE Models: SAVOYE 15 35, SAVOYE 07 10, SAVOYE 27 15 3B Year: 1999 Capacity: Up to 6,000 bottles/hour Product types: Carton Bottle diameters supported: 70mm, 80mm, 90mm Carton formats: 75cl – 2x(3x2) 75cl – 4x3 Documentation: Available Machine status: Dismantled and stored indoors Nkedpfowb D D Aex Ahzet

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  Brewhouse capacity: 250 liters per batch Production cycle: approx. 2 weeks per batch Bottling cycle: 1 day per batch Production months/year: 10 months Shelf life of beer: 18 months Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) Fermentation tank capacity: 500 liters each (3 tanks) Brewing system power: 15 kW Cooling system power: 2.3 kW Labeling power: 2 kW Scope of Delivery  1 x Brewing Unit | SlowBeer | MB 250 E | 2013 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 1 x Labelling Machine | CDA | R1000 | — 1 x Filling Machine | Toscana | — | — 1 x Manual Capping Machine | — | P0085 | — 1 x Coder | — | MC150V | 2013 1 x Electric Mill | SOMMER | 11717 | — 1 x Compressor | FINI | — | — 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) 1 x Steel Water Heating Tank | — | — | — (900 L) 2 x Water Softeners | — | — | — 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.   Nksdpfowcyc Djx Ahzst

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  Electrical panels for tanks and pumps Stainless steel tank | model DFF99 | 2000 | 25,000 liters Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters 4x Fermentation tank | 3,000 liters 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters Open tank Low tank | model STORK TGSW Filter | model PSF JB 014 350143 | 2017 Grinder | model OOEHLER OL 6000 | 2016 Silo and feeder Resistance tank | model PROMINOX | 2016 | 3,000 liters 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters Filter tank | model PROMINOX | 2016 | 4,500 liters 2x Pump | model MIM GRUP FL31Cl Pump | model CALPEDA MXH 204/A Industrial scale | model GRAM MISSIL F2-60 Pump | model LOWARA HTB 32-125/30 Pump | model ABB INOX MIM GRUO FLUID-102 Industrial sink Refrigeration chamber Pump | model PYD SH2-40 Osmosis system | model HIDROTEC Water treatment system Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 Compressor | model INGERSOLL-RAND 11BAR | 2001 Boiler | model ATTSU RL-400/12 Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999 Nkjdpfetzg H Djx Ahzot

Condition: used, Year of construction: 2020, Overview This case packer was manufactured in 2020 by German company Mühlbauer. The machine is in excellent condition, has been well maintained, and is immediately available for sale due to discontinuation of use. It is ready for immediate operation and suited for various bottle and crate formats. Technical data  Capacity: 8,000 bottles/hour Formats: 0.50 l Euro bottle / 20-bottle Euro crate 0.50 l Euro bottle / 20-bottle module crate 0.33 l Gourmet bottle / 20-bottle Euro crate 0.33 l Longneck bottle / 24-bottle module crate 0.33 l Vichy bottle / 24-bottle module crate Machine condition: Very well maintained, ready to use Scope of Delivery  Bottle packer Mühlbauer Satelite EP-0400-T Nedswmmnhspfx Ahzokt

Condition: used, Year of construction: 2016, Overview This packaging line for repacking glass bottles into carriers, trays, cartons and dollies was produced between 2002 and 2016 by several European manufacturers such as Yaskawa, Profipack, DokuConsult KG and Krones. The line is currently still in operation until June 2025 and was specially designed for repacking 0.33L and 0.5L glass bottles into 6-bottle carriers (open baskets), returnable trays and various pallet types (Euro dolly, Euro pallet). It enables both the unloading and loading of full and empty containers into new packaging units. The system will be available from June 2025, as soon as it is decommissioned. Technical details  Output: up to 9,000 bottles per hour Formats processed: 0.5L NRW returnable bottles (brown) 0.33L non-returnable bottles (green and brown) 6 open basket carriers (2x3) for 0.5L and 0.33L Euro dolly: 400 x 600 x 1,600 mm Euro pallet: 1,200 x 800 x 144 mm Basic crate 20x 0.33L: 300 x 400 x 290 mm Modular crate 20x 0.5L: 300 x 400 x 290 mm Logipack AllCare tray: 400 x 600 x 85 mm "Rollfix" adapter pallet: 1,200 x 800 x 126 mm Full carton with flash bottom (single or double-wall) for 4x 6-pack carriers Repacking configurations: From modular box 20x 0.5L → 6-pack carrier in tray on Euro dolly From modular crate 20x 0.5L → 6-carrier in tray on Euro pallet From basic crate 20x 0.33L → 6-carrier in carton Returnable crate 24 x 0.33 → 6-carrier in pinol crate 4 x 6-carrier Empties 0.5L in tray (Euro dolly or pallet) → Modular crate 20x 0.5L Scope of delivery  Unloading robot cell: Yaskawa / Profipack, MOTOMAN MH 180 II (2016) incl. head & crate handling Loading robot cell: Yaskawa / Profipack, MOTOMAN MH 180 II (2016) Bottle carrier erector: DokuConsult KG, FTA-6/4-Z1-G5 (2016) Double turning station: Profipack (2016) Pallet magazine: Krones, type 454 model LPMH (2002) Deck tray feeder Vertical strapping machine for dollies | Strapex Horizontal strapping machine for dollies | Strapex Pallet merging Spare parts can be purchased in addition to the purchase price Nkedewqhpbjpfx Ahzjt

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Nkedpfx Ahjwhvc Rozet

Condition: used, Year of construction: 2017, Overview The semi-automatic KEG filler was built in 2017 by the German company m+f KEG-Technik and fills 50-60 KEGs/ h into various containers. It is still in operation and can be inspected.  Technical data Capacity: 50-60 KEG/h Formats: 20l, 30l  Containers: KeyKeg, Dolium-KEG, PETainer, KEG  Filling head made of stainless steel  Pressure control by pressure switch (controls hot water and steam pressures for flushing the filling head) Sight glass for product feed line Dimensions (LxWxH): 1.150mm x 800mm x 2.150mm ±50 Control: Siemens S7  More pictures, videos and technical documentation available on request Nkodsl Hx Nrspfx Ahzot

Condition: used, Year of construction: 1997, Overview This crate washer was manufactured in 1997 by the German company Klann. The 1800 N model is a single-bath crate washing system designed for cleaning beverage crates of various sizes at a capacity of up to 2000 crates per hour. It is still installed and immediately available. Technical data  Capacity: 2000 crates/hour (for GDB crates, lengthwise) Crate formats: 12 × 0.7 L crates (lengthwise) Baths: 1 Construction: Stainless steel Length (total): 4,640 mm Width: 1,300 mm Electrical connection: 16 kW Vapor extraction Nkjdpfjxrg H Sjx Ahzet

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling unit (glycol) | 2019 2x 28kW Glycol tank Hot water tank 6x Fermentation tanks | 2760l | 2019 3 bar, insulated with jacket cooling, CIP capable 12x Storage tank | 2760l | 2019 3 bar, no cooling, were in a separate cold room Reverse osmosis Compressor | JAN | 585l/ min | 2020 KEG filling 1x drum washer with automatic caustic refill and steam-heated 1x keg filler Up to 70 barrels/ h, Fitting: Type S, basket fitting, Siemens S7 Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc. Nedpfxeyb N N As Ahzekt

Condition: used, Year of construction: 2021, Overview The packaging machine was manufactured in 2021 by the Italian manufacturer V-Shapes. This compact machine dispenses various products into single sachets between 0.5ml and 25ml. The scope of delivery also includes the printer, which allows the sachets to be produced in-house. The machine can be visited in operation at any time. Technical Data Packaging machine | V-Shapes | PRIME | 2021 Production capacity: Up to 45 units/minute Time for packet size change: 15 minutes Number of packaging lines: 1 Maximum dimensions of film reels: Width 110mm/ 4.33 ” Diameter 250 mm Weight of film reels: 20 kg / 44.09 lb Film reel consumption: Up to 2625 mm /min Standard weld dimensions: 5 mm(± 1 mm) Machine colour: Steel Electronic parts: Standard IP55, IP67 on request Standard electronics: PLC 6 brushless motors                                               *Pneumatic dosage system: volumetric to measure Dimensions of V-Shapes packets: Height from 50 to 100mm/1.969” to 3.937” Width: from 40 to 100mm/1.575” to 3.937” Air Pressure: 7 bar Electric power: 20 Kwh Weight (maximum): 1000 kg / 6612lb Machine Footprint: 1500mm x 1000mm x 1000mm (H) Printer | AstroNova | T2-C | 2022 Print quality: 1600 x 1600 dpi or Print speed: 6 ips (152mm/sec) or 12 ips (300mm/sec) 4 external ink tanks á 2l Dimensions: 606mm x 580mm x 795mm Weight: 60 kg (without material) Nkedpfx Asl Hx Rdohzjt

Condition: used, Year of construction: 2018, Overview  The machine was built in 2018 by the german manufacturer KRONES and is designed for high-speed wrap-around labeling from the reel. This machine is ideal for bottling lines requiring flexibility across various labeling technologies. The machine was taken from a production line and is fully functional. It is available for inspection and can be disassembled, packed and shipped on request. Technical data  year of manufacture: 2018 Capacity: approx. 20,000 /h Bottle Formats: 0.5 L, 1.5 L PET  Worked Labels: IN REEL Reel Change: Automated Electrical Supply: 400 V ± 5%, 50 Hz ± 1%, 3P + N + PE, auxiliary 24 V DC Protection Class: IP 54 (main panel and motors) Modular Design (Plug & Play): Features automatic docking stations allowing quick and toolless changeovers between different labeling methods (e.g., hot melt, cold glue, self-adhesive, wrap-around) Versatility: Capable of handling a wide range of container shapes and sizes (glass, PET, cans). Scope of Delivery  Krones ERGOMODUL labeling machine (2018) CE certification, operating and maintenance manuals, wiring diagrams Spare parts and format change components Drying System | KRONES-LINADRY | 2003 Labelcheck | KRONES | Checkmat Njdoyb Smdjpfx Ahzekt

Condition: used, Year of construction: 2005, Overview  This aseptic PET filling line for fruit juices, beverages containing fruit juice and spritzers was built between 2005 and 2006 by the German manufacturer KHS. It is suitable for still and carbonated products (up to 5 g/l CO₂) - also with or without fruit fibers. The line covers all process steps from blowing to filling, labeling, packaging and palletizing and is designed for bottle sizes from 0.5 l to 1.5 l with various closure types. The nominal output is approx. 27,000 bottles per hour at 1.0 l still. The line will be in operation until approx. February/March 2026 and can be inspected by appointment. Technical details  Output: up to 27,000 bph at 1.0 l still Bottle sizes: 0.5 l - 1.5 l PET Products: Still beverages, carbonated up to 5 g/l, with or without fruit fibres Caps / neck finish: 26/22, 38 mm flat cap, sports cap possible Years of manufacture of the main machines: 2005-2006, individual units more recent (e.g. servo capper 2023, labeller 2013, winder 2017) Scope of delivery  Stretch blow molder KHS Blomax 16C (2005-2006), incl. chiller from Riedel Rinser KHS Bottle rinser FR-DR (ACF) 140 28/38 Filler KHS Innofill DNVF-PET ACF 100/15 SV, 100 filling stations, 15 capping stations, servo capper (2023) Nitrogen dropper from VBS, sterile tank, filling management from Eckel & Sohn, cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap), cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap). VBS, sterile tank, filler management KHS Metec Cap feeder Eckel & Sohn, cap disinfection KHS Innoclean KR9 (Flatcap) and SC4 Twin 28 S 04 (Sportscap) Cleanroom Cleanroom incl. ventilation system Fa. M&W, Zander/Smardt OPK Transport technology Container and air transport KHS, Lanfranchi Inspection Full bottle inspection Heuft Squeezer Labeling Krones Starmodul (YOM 2013) with Contiroll + 2x AutoCol units + dryer Krones Linadry Label inspection unit Heuft FinalView Packaging Tray/Shrink packer KHS Kisters Innopack TSP 050 V TPFO Wrap Around Packer KHS Kisters Innopack 320/70 (BJ 1999) Carry handle applicator KHS Carry Strip Master CSM 050- 2 Palletizing & wrapping Palletizer KHS Innopal Markant 1BSH2-PL + Innopal Markant 1BSH2/1-PL (both year 1999) Wrapper Haloila Octopus 1845S (year 2017, currently at a different location) Nkodpewzlb Nofx Ahzst

Condition: used, Year of construction: 2002, Overview  This complete PET bottling line was manufactured between 1999 and 2007 by Krones (Germany) and other European suppliers. It is currently still in operation and used for filling carbonated water and lemonades into 1.5L PET bottles. The line has an output capacity of up to 16,000 bottles per hour. It has been regularly serviced and remains in good working order. Availability: end of August 2025. Technical data  Capacity: up to 16,000 bph (based on 1.5L PET bottles) Formats: 1.5L PET bottles (short neck and lid) Bottle material: PET Type of filler: Isobaric filler Year of manufacture: between 1999 and 2007 (various machines) Cap type: short neck Type of label: OPP (Contiroll) Scope of Delivery  1 x Blow molder CONTIFORM S16 | Krones | 2002 | incl. preform hopper & cooler Air conveyors from blowing to labeler & filler 1 x Labeler CONTIROLL | Krones | 2000 1 x Tribloc 77/88/11 MECAFILL isobaric filler | Krones | 2002 | incl. metal detector 1 x Mixer for carbonated water and drinks | ca. 2000 1 x Inkjet printer HITACHI RXS Conveyors between filler and tunnel 1 x Shrink tunnel VARIOPAC | Krones | 2007 | 45 packs/min 1 x Package holder applicator TWIN PACK MDE INOX | 2003 | single-row, 45 packs/min Transport of packages to palletizer 1 x Palletizer KETTNER KR51112 Pressant Universal | 1999 Pallet feeder with lift and transport 1 x Pallet ring wrapper ROBOPAC GENESIS | 2002 Nkjdpfxjwzvl Sj Ahzet

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Nkodjydiqfspfx Ahzst Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) Nedpfx Asu Rda Iohzskt - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: good (used), Year of construction: 1995, Machine-Details: Stock-No. 1022-2330 Type of machine Internal and Face Grinding Machine Make GLAUCHAU Type SIP 400x500 Year of manufacture 1995 retrofit Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information: Used internal cylindrical grinding machine with face grinding device Nksdpoyddabsfx Ahzot in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: excellent (used), Year of construction: 2018, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: -, turning length: 1,350 mm, turning diameter over cross slide: 715 mm, turning diameter: 550 mm, spindle motor power: 48 W, spindle speed (max.): 3,000 rpm, spindle bore: 106 mm, travel distance X-axis: 380 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,350 mm, mount diameter: 12 mm, total height: 2,346 mm, total length: 4,088 mm, total width: 2,129 mm, swing diameter over bed slide: 950 mm, overall weight: 10,400 kg, High specification machine with Fanuc 32iTB control. Many options including SMW Autoblok steady rest on programable Servo base, coolant through steady, high pressure coolant, enlarged left hand door to allow 920 mm swing workpiece (950 mm max). Various other options. New cost in 2018 over £200k. Nkedpfxovz Ab Uo Ahzst

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: M0335, Cyril Bath type 20 T Hydraulic Swing Arm Stretch Forming Machine year 1997 serial number M0335 capacity 20 t engine power 126 kW electric connection 400 V description With control Cyril Bath Monitor Type: Flexscan 685 12 CNC axes 4 auxiliary axes Stretching force 20–200 kn Bending angle 2 x 95 degrees Rotation stretching cylinder 2x –45/225 degrees Component length from 762 to max 3810 mm Njdpjqcu Acefx Ahzekt Hydraulics from Rexroth with 2 x hydraulic pumps: 45 kW each Various spares available

Condition: new, functionality: fully functional, mileage: 1 km, power: 16.5 kW (22.43 HP), fuel type: diesel, color: yellow, overall weight: 3,300 kg, empty load weight: 3,300 kg, operation weight: 3,400 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2025, operating hours: 1 h, Equipment: additional headlights, cabin, The GG3500 excavator combines high power, outstanding performance, and reliability. Equipped with the KUBOTA V1505 engine and advanced hydraulics, it is ideal for demanding construction work. Thanks to its compact size and extensive capabilities, it is versatile across various job sites. High Performance and Powerful Engine Powered by the KUBOTA V1505 engine delivering 18.5 kW, four cylinders, and liquid cooling for efficient operation. Fuel consumption ranges from 1.3 to 1.5 L/hour, with a 45 L fuel tank enabling long working periods. Premium Hydraulic System Fitted with LTM03AX and LKC swing hydraulic motors, providing an oil flow of 99 L/min and a pressure of 20 MPa, ensuring strong digging power and system reliability. The hydraulic oil tank has a 40 L capacity for continuous operation. Nkodox H Uxhspfx Ahzot Excellent Operating Parameters Maximum digging depth of 2827 mm, digging radius of 4831 mm, and digging force of 27 kN. Maximum dumping height is 3181 mm, suitable for loading at greater heights. Compact Dimensions and Stability Dimensions: length 2921 mm, width 1550 mm, height 2485 mm, with a ground clearance of 522 mm. The bucket width is 400 mm and arm length is 1620 mm, ensuring precision and a broad working range. Mobility and Comfort Two travel speeds (0–1.8 km/h and 0–2.8 km/h) provide flexibility on the job site. Ground pressure of 36 kPa allows operation on soft surfaces, with a 360° swing radius for easy maneuverability in confined areas. Machine weight: 3300 kg Engine model: KUBOTA V1505 Number of cylinders: 4 Max. power: 18.5 kW Cooling method: Liquid-cooled Engine oil capacity: 6 L Fuel consumption: 1.3–1.5 L/h Max. engine speed: 2300 rpm Fuel tank capacity: 45 L Hydraulic oil tank capacity: 40 L Hydraulic motor model: LTM03AX Travel drive motor model: LKC Swing hydraulic motor model: LKC Hydraulic oil flow: 99 L/min Nominal pressure: 18 MPa Max. rated pressure: 20 MPa Bucket capacity: 0.08 m³ Travel speed: 0–1.8/0–2.8 km/h Gradeability: 0.3% Ground pressure: 36 kPa Max. digging force: 27 kN Max. digging radius: 4831 mm Max. digging depth: 2827 mm Max. digging height: 4563 mm Max. dumping height: 3181 mm Max. swing angle: 110° Length: 2921 mm Width: 1550 mm Height: 2485 mm Ground clearance: 522 mm Bucket width: 400 mm Blade width: 1550 mm Arm length: 1620 mm Track size: 300x52.5x84