Used Vbmt Turning Plate for sale (19,915)

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, Fanuc 18ITB parts diameter 130 mm, length 110 mm spindle speed 7500 rpm 12-station turret max tool speed 6000 rpm Lasdpfx Aox Irzvob Noh power 24 kW, chip conveyor

Condition: used, Year of construction: 2015, turning diameter max. 240 mm turning length 470 mm control 840 D sl Operate 4.8 Celos greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 780 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 13 / 14 kW max. Torque 171,5 / 192 Nm inner draw tube diameter 52 mm C-Axis 0,001 ° spindle diameter in front bearing 100 mm spindle nose FL 140H5 Spindle speed range subspindle max. 6.000 min/-1 Lsdpfxsz S Nyae Ab Nsah power capacity - Sub spindle 12,6 / 16,2 kW max. Torque 48 / 62 Nm inner draw tube diameter 37 mm C-Axis 0,001 ° spindle diameter in front bearing 90 mm spindle nose FL 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. tool taper VDI 30 Spindle speed - driven tool stations max. 5.000 min -1 power capacity - driven tool-stations 4,18 kW max. Torque 16 / 20 Nm y-axis 80 (+/- 40) mm x-axis 145 mm y-axis 80 (+/- 40) mm z-axis 520 mm z2-Axis 550 mm rapid traverse ( X / Y / Z ) 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ) 4,5 / 4,5 / 7,5 kN total power requirement 30 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 7,0 x 3,0 x 2,2 m CNC - Turning- and MillingCenter DMG GILDEMEISTER - CTX alpha 500 V6 - Only approx. 11,139 spindle hours - External chuck flushing system for the main spindle - External chuck flushing system for the counter-spindle Coolant supply through the counter-spindle - Coolant spray gun - Bar machining package Workpiece unloading device with conveyor belt (left-hand side) for parts up to 51 mm in diameter and 185 mm in length, max. 3 kg Hydraulic hollow clamping system Draw tube inner diameter: max. 52 mm 4-color signal light Connection for bar feeder or bar loading magazine - Preparation for external handling Electrical robot interface (Profibus) Automatic work area door Chuck flushing system with coolant (main spindle)

Condition: used, Year of construction: 2015, turning diameter max. 500 mm turning length 800 mm control sl Operate 3G ShopTurn Siemens swing diameter 500 mm distance between spindles 1.020 mm turning speed range - main spindle max. 5.000 min/-1 power capacity - main spindel 25 / 34 kW max. Torque 280 / 380 Nm spindle head 170h5 spindle diameter in front bearing 130 mm spindle bore 87 mm C-Axis 0,001 ° tool taper HSK 63 A number of toolpositions 80 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 120 mm max. tool weight 12 kg max. tool length 300 mm Lasdpsz S Nygsfx Ab Njh Speed Milling Spindle max. 12.000 min/-1 power capacity - milling spindle 19 / 22 kW Torque 85 / 100 Nm tool taper HSK 63 A B-Axis +/- 110 ° x-axis -10 ... +490 mm y-axis +/- 100 mm z-axis 1: 845 mm z-axis 2: 600 mm z-axis 3: 800 mm Spindle speed range subspindle max. 6.000 min/-1 power capacity - Sub spindle 20 / 27 kW bar material dia. 51 mm spindle bore diameter 73 mm spindle diameter in front bearing 100 mm C-Axis 0,001 ° total power requirement 85 kVA weight of the machine ca. 10,0 t dimensions of the machine ca. 7,0 x 2,9 x 2,6 m CNC - Turning- and Millingcenter DMG MORI - CTX beta 800 TC V6 - 5-axis simultaneous machining - Main and counter-spindle - Swivel-type milling spindle - ShopTurn - Off-center turning and milling - Multi-thread cycle - Program state control - Tool sorting cycle - Easy Tool Monitor for Siemens control system - Chuck flushing system for main spindle - Chuck flushing system for counter-spindle - Differential pressure clamping - Coolant supply through the counter-spindle - Bar machining package for CTX beta (77 mm capacity) Workpiece the-take-off device (left side) Hydraulic hollow clamping system 4-color signal tower Interface for bar feeder or bar magazine - In-process workpiece measuring system (Renishaw) - Safety window cleaning system - Coolant spray gun

Condition: good (used), Year of construction: 2011, functionality: fully functional, turning length: 1,011 mm, turning diameter: 658 mm, spindle bore: 102 mm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,077 mm, rotational speed (max.): 3,300 rpm, rotational speed (min.): 50 rpm, bar passage: 102 mm, total height: 2,720 mm, total length: 6,585 mm, total width: 2,800 mm, overall weight: 13,400 kg, We are pleased to offer this Mazak Integrex i-400 x 1000 multitasking CNC machine, manufactured in 2011 and equipped with Mazatrol Matrix control. A versatile machine combining turning and milling operations in a single setup, ideal for precision machining and complex (bigger) components. Technical specifications: Turning diameter: 658 mm Max. turning length: 1011 mm Bar capacity: 102 mm Travel on X-axis: 615 mm Lsdpfxsz Rt Dts Ab Noah Travel on Y-axis: 250 mm Travel on Z-axis: 1.077 mm B-axis travel: -120/+120° Main and spindle: 50 - 3300 1/min. B-axis index increments: 0,0001° C-axis indexing of spindle: 0.0001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 36 tool positions NC Tailstock: MK5 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Ledpfoz Dgw Sox Ab Nsah

Condition: used, Year of construction: 1992, Technical details: sheet width: 4050 mm Lsdpfxju Icpcs Ab Njah plate thickness: 16 mm distance between columns: 4900 mm control for program: Robosoft SC5 Controller back gauge: 1000 motorisch cutting angle: 0,5° - 3° ° cutting gap adjustment: ja / jes mm down holder: 23 Stück height over floor: 1030 mm Table dimensions: L x B 4000 x 520 mm weight of the machine ca.: 19,2 t dimensions of machine: 5,2 x 2,2 x 2,78 m characteristics: - knife length 4100mm, 4 turns possible - Number of strokes: 5 - 11 strokes/min. - Table: side stop with linear scale, with stop bar 1000mm removable, feed aid via / with ball bearings - front support: LxWxH: 1600 x 1100 x 1000 mm; movable over roller rail, easy handling - backgauge adjustable, motor driven and foldable Operation via control panel with jib lenmgth arm and foot control Equipment: - light grid at backgauge - cut line ilumination Accessories: - 1 set (2 pieces) shearing blades *

Condition: used, functionality: fully functional, machine/vehicle number: 2550X10.14MM, control type: manual, degree of automation: manual, actuation type: mechanical, number of rollers: 3, roller (top) diameter: 300 mm, side roll diameter: 280 mm, roller diameter: 400 mm, roller length: 2,550 mm, working width: 2,500 mm, working height: 800 mm, sheet thickness (max.): 14 mm, sheet thickness stainless steel (max.): 10 mm, input voltage: 380 V, input frequency: 50 Hz, Equipment: centralized greasing system, cone bending device, emergency stop, swiveling upper roller, 3 roll 2500x14 mm Plate bending machine Model OMCCA ITALY CAPACITY plate width 2500 mm plate thickness 14 mm pre-bending 10 mm --- Useful rollers width 2550 mm Top roll d 300 mm Side rollers D 280 mm hard surface of the 3 rolls centralized gear unit side rolls driven Opening front hydraulic drop-end to unload the closed shell. Ljdpsy Aubusfx Ab Nsah Extended shafts to take installation of add-on molds for section bending Variable speed rolling up to 5 mtr/min power electric motor 20Hp on hydraulic unit console with electric push buttons commands. Dial gauge position rollers readout safety installations with emergency stop

Condition: used, This listing is for a Microm EC 350-2 Cryoconsole. The unit is in full working condition and is ready for immediate release. The Microm EC 350-2 cryoconsole is an essential tool for laboratories focused on histology and sample preparation, particularly when working with paraffin-embedded samples. Its advanced design and functionality ensure reliable performance for optimal results. Key Features: Large Cooling Plate: The EC 350-2 is equipped with a spacious cooling plate specifically designed for the solidification and maintenance of samples in paraffin. This feature ensures that samples are uniformly cooled, which is critical for preserving sample integrity. Adjustable Temperature Range: Users can easily set the temperature between 0 and -15ºC, allowing for precise control based on specific sample requirements. This flexibility is crucial for various protocols that may necessitate different cooling conditions. Microprocessor Control: The operations of the cryoconsole are managed through a microprocessor integrated into the paraffin dispenser, ensuring accurate temperature management. This technology helps maintain consistent conditions, minimizing the risk of temperature fluctuations that could affect sample quality. Independent Operation: The EC 350-2 can operate efficiently at its maximum performance of -15ºC without requiring any adjustments. This feature makes it a dependable choice for laboratories that demand stability and reliability in their sample processing. Applications: Lsdpfxexxyf Uj Ab Neah The Microm EC 350-2 is ideal for: Histology Laboratories: Perfect for preparing tissue samples for sectioning, ensuring that paraffin solidifies correctly for optimal slicing. Research Settings: Supports various experimental protocols requiring precise temperature control during sample preparation.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Maximum turning diameter: 465 mm Maximum swing diameter: 680 mm Control system: Siemens Travel range X-axis: 300 mm Travel range Z-axis: 1,050 mm Turning length: 1,050 mm Maximum spindle speed: 3,250 rpm Spindle bore: 76 mm Includes driven tools Number of positions in the tool turret: 12 stations Chuck diameter: 250 mm Maximum workpiece weight between centers: approx. 350 kg Ledoz Ri U Iopfx Ab Nsah

Condition: used, color: other, Year of manufacture: Apr 2016 Year of construction: 2016 Laedpfx Absy Hrhyo Neh VERY NICE GOOD WORKING MODERN TERMINAL TRACTOR.

Condition: good (used), Used horizontal boring mill/drilling machine by Cornac Type BS 65 Spindle diameter 65 mm Table dimensions approx. 600 x 1000 mm Lajdpfxoz Iarqe Ab Nsh X / Y / Z = 1000 / 800 / 650 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. Ljdsz Ndu Eopfx Ab Neah It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Offer 26327 Lajdpfx Abj Ad Hz Ro Nsh Technical specifications: - Length: approx. 2000 mm - Width: approx. 1000 mm - Plate thickness: approx. 170 mm - Table height: 840 mm - 4 height-adjustable support feet - Weight: approx. 1200 kg

Condition: ready for operation (used), Year of construction: 2021, sheet width 6020 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm back stop - adjustable max. 1000 mm work height max. 1030 mm no. of strokes 5 - 10 Hub/min cutting angle 0.5 - 3.0 ° down holder 33 Stück Control SC 100 T engine output 11.0 kW weight of the machine ca. ca. 27000 kg range L-W-H 7650 x 2400 x 2885 mm New price in 2021 ~ 160.000 Euro Special price upon request - in checked conditions - machinevideo - ?v=qH3uqGNZZp8 Equipment: - Robust electro-hydraulic guillotine shear * Design: Guide rail - HACO CNC control model SC 100 T, pivoting at the front left * Control unit with LCD display * Pre-selected positioning of the backgauge * Digital display of actual position * Electro-hydraulic cutting angle adjustment * Electro-hydraulic cutting gap adjustment * Programmable retraction from the backgauge * Programmable cutting length limitation Lajdpoz Hd R Ijfx Ab Njh * Automatic + manual programming mode * Emergency stop switch - CNC electro-motor-driven material/backgauge * On recirculating ball screws * Continuous adjustment up to max. 1,000 mm - CNC electro-hydraulic cutting gap adjustment - CNC electro-hydraulic cutting angle adjustment - Hydraulically operated Material/sheet metal clamp - Front finger guard - Front support table with recessed grips - 1x side stop with mm scale - 1x freely movable foot switch - Rear safety device (light barrier) - Operating instructions (PDF) Optional accessories included: - Sheet metal holding device for thin sheet metal blanks * Optimal positioning of thin sheet metal

Condition: excellent (used), Year of construction: 2012, Machine data Year of manufacture: 2012 Control system: Mitsubishi Spindles: Main and counter spindle Y-axis: Available Tool turret: 8 stations Bar feeder: LNS Sprint 542 Full load current: 84 A Connection, weight and dimensions Machine weight: 3,000 kg Voltage / phases / frequency: 200 V / 3~ / 50–60 Hz Connection power: 29 kVA Equipment and scope of supply Main and counter spindle Y-axis Tool turret with 8 stations LNS Sprint 542 bar feeder Basic set of tool holders; the exact scope of holders will be listed in the quotation. Further accessories belonging to the machine, as shown in the offer photos. Lsdpfxoz Tc S Eo Ab Nsah LNS Sprint 542, basic set of tool holders and further accessories belonging to the machine, as shown in the offer photos. Exact scope of holders as per quotation. Technical specifications are subject to change without notice. Errors and prior sale excepted. The properties and scope of supply agreed upon in the purchase contract shall be binding.

Condition: excellent (used), Year of construction: 2014, Takisawa NEX - 908 – 6-axis machine Year of manufacture: 2014 Control system: - Fanuc Series 32i - Model B Tool turret: - 12 stations, all stations driven (powered tools) Main spindle: - Spindle bore 52 mm. Lsdpfx Ao Adrf Usb Neah Axes: - X, - Z, - C, - Y, - A, - B Accessories: - Various driven tools, axial/radial - Various collets - 1 collet chuck - Parts collection system - Chip conveyor - Coolant system Availability: - Immediate Special features: - The machine will be sold complete with all accessories (full equipment package). - The machine can be inspected and tested under power.

Condition: used, Year of construction: 2012, functionality: fully functional, Spinner TC 600 65 SMCY with C-Y axis and sub-spindle Technical data: max. swing diameter ~600 mm max. turning diameter ~400 mm max. turning length ~650 mm travel X/Y/Z: X 275 / Z 700 max. rapid traverse X/Z 15/24 Lasdpfxez Iqf Uj Ab Nsh max. speed 4500 rpm spindle power 22 kW torque 250 Nm max. speed sub-spindle: 6000 rpm chuck 165 mm spindle power sub-spindle: 10 kW tailstock size 8 taper connection MK4 Number of tools: 16 tool holder: VDI 30 max. speed rotating tools: 5000 rpm power (60%): 6 kW torque (60%) ~30 Nm Weight: 5,000 kg Dimensions: 2.5 m × 1.6 m × 2 m Accessories: chip conveyor tool holders extraction system

Condition: used, Universal Shaker accessories / adapter plates / expander plates Universal accessory kit for electrodynamic shaker test systems Professional accessory kit with expander plate, adapter plates, and clamping accessories for vibration test benches, vibration testing, and material testing. For sale is a comprehensive used accessory kit for an electrodynamic shaker or vibration test bench. The accessory kit is ideal for setting up test specimens, special fixtures, adapter constructions, and individual test setups. The kit consists of several solid aluminum adapter plates, a reinforced expander plate, adapter elements, and other accessories. Technical data: Manufacturer: unknown Type: accessory kit for electrodynamic shakers / vibration test benches Material: predominantly aluminum, partially steel Components: 1 reinforced expander plate, approx. 770 × 770 mm – approx. 90 kg 2 adapter plates, approx. 770 × 770 mm – approx. 45 kg and approx. 40 kg 1 adapter plate, approx. 770 × 770 mm – approx. 35 kg 1 adapter plate with circular cutouts – approx. 25 kg 1 round adapter plate – approx. 20 kg 1 clamping rail / linear adapter – approx. 25 kg 1 precision adapter block – approx. 3.06 kg 1 steel adapter plate – approx. 2.18 kg Other adapter and fastening parts as shown in the pictures Features: Solid aluminum adapter plates Reinforced expander plate with central mounting Precision-engineered hole and thread patterns High stiffness for dynamic loads Adapter plates of various sizes and weights Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Application areas: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special constructions Lsdpfxezp D Tke Ab Nsah Scope of delivery: Complete accessory kit as shown in the pictures 1 expander plate Several adapter plates Round adapter plate Adapter plate with circular cutouts Clamping rail / linear adapter Precision adapter block Other adapter and fastening parts as shown in the pictures Weight: 400 kg Condition: Used Optical condition as shown in the pictures. Normal age-related signs of wear, scratches, and pressure marks are present. Some minor edge damage and signs of wear from test operation. Only the accessories shown in the pictures are for sale. The table or other items not explicitly mentioned in the pictures are not included in the sale. Shipping on a pallet or collection is possible. Due to the high total weight, shipping is only possible via freight forwarder. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Year of construction: 2006, Victor V26-II CNC lathe; with C-axis; with driven tools; FANUC 21i-TB control; chuck: 10"; turning diameter: 520 mm; turning length: 1090 mm; spindle speed: 3,500 rpm; upper turret toolholder with 12 positions, 6 of which are driven; tool presetting device; chip conveyor; oil mist extraction. Ledpfxer E Amgs Ab Njah

Condition: used, Year of construction: 2015, functionality: fully functional, NAKAMURA NTJ-100, CNC turning and milling center with FANUC 31i-B control • C-axis on the left spindle • C-axis on the right spindle • Milling drive on the upper turret • Milling drive on the lower turret • B-axis on the upper turret +/-91° • Y-axis +/- 40 mm on the upper turret • Y-axis +/- 32.5 mm on the lower turret • Bar capacity left 42mm A2-5, 6000 rpm • Bar capacity right 42 mm A2-5, 6000 rpm • 12/24 + 6 stations under 45° turret, top • 12/24 stations turret, bottom • 90° inclined bed • Interface for bar loader magazine, Hommel • Air blow-out, right spindle • Drive power left, FANUC AC11/7.5kW • Drive power right, FANUC AC 11/7.5KW • Chuck pressure monitoring, right and left • 19" touch monitor • Door lock • Clamping force control • Helical interpolation • NT-Nurse 2 • NT-Work navigator Lasdpfxoz Iy Urj Ab Noh • Feed rate and rapid traverse adjustment switch • Transformer • CE marking • Memory capacity 2560 meters • Tool offset memory 99 items • Program management 2000 programs • Extended editor function • Background editor • Macro B • Direct input of drawing dimensions • G52-G59 • Polar coordinate interpolation • Cylindrical interpolation • Current documentation • Machine color RAL 9002, light gray • Door color RAL 7011, iron gray • Chip conveyor RAL 7024, graphite gray Machine options NTJ-100 Air and coolant blow-out through the right spindle Ø 65mm NTJ-100 Chuck blow-out, left spindle NTJ-100 Intelligent handwheel NTJ-100 Polygon turning function Manual tool probe, removable for left and right Workpiece unloading NTJ-100 Unloading with gripper hand on the upper turret for parts up to Ø 65 mm x length 150 mm / 3.0 kg NTJ-100 Material collection tray type A with enclosed collection box, left, for material remnants and finished part ejection, part size up to spindle bore 65 mm NTJ-100 enlarged main spindle, left, Ø 65 mm, spindle nose A6 NTJ-100 enlarged counter spindle, right, Ø 65 mm, spindle nose A6 Chip disposal Hinged belt chip conveyor for NTJ-100, discharge right. Manufacturer: AME. Color: RAL 7024. Motor right, in the direction of travel.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Lodpfx Aoz Dgvnsb Neah Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: good (used), Year of construction: 2004, functionality: fully functional, overall weight: 13,500 kg, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, Lodjzt Ihmspfx Ab Noah HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Lodpfx Asz Dgudob Nsah Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, Universal   Shaker angle adapters / adapter devices   Universal shaker accessories Heavy-duty aluminum angle adapters, clamping devices, and adapter elements for vibration testing systems, vibration tests, and special applications   For sale is a used accessory set for an electrodynamic shaker or vibration testing system.   The set consists of various heavy-duty aluminum angle adapters, adapter plates, clamping devices, clamping blocks, and other accessories. Ideal for test specimen mounting, special designs, and vibration tests.   Technical data:   Manufacturer: unknown Type: Accessory set for electrodynamic shaker / vibration testing system Material: predominantly aluminum Design: angle adapters, adapter plates, clamping devices, and fasteners   Components: Several heavy-duty angle adapters Adapter plates of various sizes Clamping and tightening devices Clamping blocks and adapter elements Fastening materials and other accessories as shown in the pictures   Features:   Heavy-duty aluminum construction Threaded and clearance holes Universally applicable Angle adapters for test specimen mounting Adapter plates Clamping and tightening devices Accessories as shown in the pictures   Application areas:   Electrodynamic shakers Vibration testing systems Vibration testing Material testing Environmental simulation Research and development Automotive industry Test specimen mounting and special designs   Scope of supply:   Complete accessory set as shown in the pictures Lajdpfxozpx Ucs Ab Neh Angle adapters Adapter plates Clamping devices Clamping blocks Fastening materials Other accessories as shown in the pictures   Weight: 600 kg   Condition:   Used Visual condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present.   Only the accessories shown in the pictures are sold.   The table shown in the pictures or other items not explicitly mentioned are not included in the sale.   Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale.   We will be happy to answer any further questions by telephone.

Condition: good (used), Year of construction: 1990, Johnford 5 VH Milling machine by Johnford with Fagor digital readout, year of manufacture 1990, in good condition CE-compliant!! Technical data: Year of manufacture: 1990 Working area Table clamping surface: 1370 mm x 250 mm Maximum table load: 350 kg Travel distances X-axis travel: 800 mm Y-axis travel: 390 mm Z-axis travel: 380 mm Vertical milling head Spindle speed (vertical): 70 rpm - 3600 rpm Spindle taper: SK40 DIN 2080 Quill stroke: 127 mm Feed Quill feeds (3): 0.04; 0.08; 0.15 mm/rev Drive power Main drive motor output: 3.75 kW Ljdpfxeyalc Ao Ab Neah Dimensions and weights Dimensions (L x W x H): 2.54 m x 2.16 m x 2.24 m Weight: 1590 kg About the machine: This versatile universal milling machine combines all the advantages of the world’s best-selling milling machine with additional stability. Belonging to the category of conventional milling machines, it stands out as the top model of the 5 VH series with an SK 40 tool taper and a 30% higher net weight. Both the X and Y axes are equipped with infinitely variable feed units. The swiveling vertical milling head offers a wide speed range for machining steel and non-ferrous metals. Further features include a four-stage automatic quill feed, pneumatic tool clamping, and a large table for workpieces and clamping devices. Further milling machines from well-known manufacturers can be found on our website.