Used Vc 999 for sale (834)

Condition: good (used), Year of construction: 2012, functionality: fully functional, Weiler Praktikant VC precision lathe Manufacturer: Weiler Type: Weiler Praktikant VC precision lathe Year of manufacture: 2008 Condition: used, very good, serviced and inspected with inspection protocol according to factory specifications Technical details Turning diameter: 250 mm Turning length: 650 mm Center height: 160 mm Swing diameter over bed slide: 320 mm Max. swing diameter over cross slide: 190 mm Main spindle: Speed range – main spindle: 30 – 4,000 rpm Power output – main spindle: 10 / 6.0 kW Number of gear stages: 1 Spindle head: 5 / DIN 55027 Spindle diameter in front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: 40 mm Tool holder: System: MultiFix B Turning tool shank cross-section: 20 x 20 Tailstock: Quill travel: 85 mm Quill diameter: 40 mm Tailstock taper: MK 3 Feeds: Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Cross feed: 0.006 – 0.2 mm/rev Thread cutting: Metric: 0.25 – 8 mm Inches: 80-2 1/” Module: 0.25 – 4 mm Travel distances: Cross slide travel: 150 mm Top slide travel: 110 mm Swivel movement: 180 ° Rodpfsyucd Tex Al Iet Total power requirement: 15 kVA Machine weight: approx. 1.0 t Space requirements: approx. 2.5 x 2.0 x 2.0 m Scope of delivery: – Weiler Praktikant VC precision lathe – Machine lamp – Documentation – Three-jaw chuck – Tailstock – Multifix tool holder – 8x machine feet – Original tool set

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, table width: 670 mm, table length: 1,500 mm, table load: 1,300 kg, spindle speed (max.): 12,000 rpm, This 3-axis Mazak VC PRIMOS 400S was manufactured in 2016. This vertical machining center features a table size of 1500 x 670mm, a maximum load capacity of 1300kg, and a spindle speed of 20,000rpm. It includes a tool magazine with 20 places and 2 pallets. Ideal for precision machining, buy this Mazak VC PRIMOS 400S vertical machining center. Contact us for further details regarding this vertical machining center. Machine Benefits Technical Machine Benefits Rodpfx Alsyi El Ne Ijt • Rapid feed x-y-z 60 m/min • Table size 600 x 400 mm • Tool magazine 14 positions/ tool shank bt-30 accessories/chip conveyor

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: 840D sl, spindle speed (max.): 12,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3s SPINNER VC 750 vertical machining centre was manufactured in 2016. It features a Siemens 840D sl control system, a spindle speed of up to 12,000 RPM, and a high-speed double-arm tool changer with 24 tool stations. With low spindle hours and a focus on prototyping applications, consider the opportunity to buy this SPINNER VC 750 vertical machining centre. Contact us for further details. Rsdpfxeyifm Ds Al Ist • Programming: Siemens ShopMill-OPERATE (conversational) • Spindle: in-line direct drive (Combi-Drive); pull studs DIN 69872-A • Coolant: Internal coolant supply (IKZ; noted as high-pressure) • Rapid traverse: 36 m/min • Guideways: Linear guides on X/Y/Z • Tool changer: High-speed double-arm, 24 stations; spindle taper blow-out device • Enclosure: Full splash guard housing • Standard equipment: Coolant system, workspace lighting • Installation: Leveling elements included • Finish: Two-tone paint RAL 7035 (light grey) / RAL 5008 (grey-blue) • Condition: Approx. 100 spindle hours (prototype use; like-new) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 450 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: FANUC, controller model: oi-md, table width: 410 mm, table length: 770 mm, table load: 200 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis SPINNER VC 450 was manufactured in 2011. It features a Fanuc 0i-MD control unit, X/Y/Z travels of 450/400/400 mm, and a rapid traverse rate of 36 m/min. The spindle operates at up to 15,000 rpm with a power of 7.5 kW. It includes a 24-tool changer, linear guideways, and a chip conveyor. If you are looking to get high-quality milling capabilities consider the SPINNER VC 450 machine we have for sale. Contact us for more information. Additional equipment • Air-blow system for spindle taper • Included: Approx. 40 SK40 tool holders Rjdjyar Avopfx Al Ist Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, total height: 2,500 mm, total width: 1,800 mm, table load: 250 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, tool weight: 5,000 g, product length (max.): 2,400 mm, This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details. • Condition: Operational; reportedly very low usage • Control: To be confirmed • Power supply: 3 x 400 V / 50 Hz • Total power: 20 kVA • Compressed air: 6 bar • Table: 650 x 410 mm; 3 T-slots (14 mm) • Rapid traverse: 48 m/min • Tool magazine: 24 positions; max tool Ø 77 mm (125 mm with adjacent pocket free); max tool length 200 mm; tool change time 1.3 s • Coolant system: 250 L Rjdpjykt T Defx Al Ist • Spindle hours: Unknown (reported very low) Additional equipment • New 4th axis (included, never installed, unused, still in box) • Complete tooling set included (as shown in the pictures) • Tool cabinet (as shown in the pictures) Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2020, functionality: fully functional, power: 32 kW (43.51 HP), input voltage: 400 V, input frequency: 50 Hz, input current: 46 A, type of input current: three-phase, We offer this used Becker VACS 0040.0030 VC+ vacuum pump, year of manufacture 2020. Three pumps are controlled by frequency inverters, adjusting to the vacuum level at the tables (much more effective holding than with a single pump). Very good sound insulation – high working comfort. The machine undergoes annual maintenance at Becker (last serviced in 2026, new vanes installed in all pumps). Type: VACS 0040.0030 VC+ Frequency: 50 Hz Voltage: 400 V Current: 46 A Power: 32 kW Serial number: 3506329 Month/year of production: 09/20 For inquiries or further information, please send a message or contact us by phone. Rodpfx Asy Exr Nol Ijt

Condition: good (used), Year of construction: 2015, operating hours: 6,600 h, 1 used machining centre Manufacturer: Spinner Model: VC 750 Year of manufacture: 2015 Control: Heidenhain iTNC 530 Rodsyngc Tepfx Al Iet Approx. 6,600 spindle hours Travel: X 760 mm Y 460 mm Z 460 mm Clamping table: 900 x 410 mm Spindle speed: 12,000 rpm Tool holder: SK 40 Tool changer: 24 positions Workpiece weight: 350 kg Equipped with: Robot automation Heidenhain iTNC 530

Condition: used, Year of construction: 2008, Weiler Primus VC Universal Lead and Feed Screw Lathe Condition: Used Year of manufacture: 2008 Technical data Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm Rjdoyuy D Repfx Al Iot Bed width: 205 mm Infinitely variable speed: 30 - 4000 rpm Motor power Main drive rated power: 4 kW Tailstock taper: Taper DIN 228, MK 3 Quill stroke: 85 mm Dimensions Weight: approx. 800 kg Dimensions (LxWxH): approx. 1600 mm x 950 mm x 1700 mm Equipment / Accessories Siemens SICOMP IMC 05 3-jaw chuck 4-jaw chuck Quick-change tool post system Multifix with 6 holders Bed stop Drill chuck with taper arbor Collet chuck Large collet set Fixed and travelling steady rest Coolant system Emergency stop switch Machine light Change gear set Operating tools

Condition: used, Year of construction: 2005, Technical details: Rjdpowftr Dofx Al Iot screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! *

Condition: good (used), Year of construction: 2011, We are pleased to present for Sale the Vent cutter VC-16 RS from Stork. Brand Rodpfx Alor Igq Ts Ijt Stork Model VC-16 RS Year 2011

Year of construction: 2016, condition: used, Manufacturer : STAES Model : VC HICA Type : Process tank Year: 2016 Circulation / mixing pump : SPX W+ 50/8 160 STD Material : stainless steel Tank / Vessel Volume: 200 L Operating pressure: Atmospheric Temperature : -10 °C to +100 °C   Jacketed Volume : 5,6 L Operating pressure : 0 / 3 bar Temperature : -10 °C to +100 °C Rsdpfx Aeykcayel Ijt jacket pressure drop : 0,2 bar

Condition: excellent (used), Vötsch Climate Test Chamber We offer a Vötsch climate test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm External dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Feed-throughs: Ø 125 mm, Ø 50 mm Specifications for temperature tests: - Temperature range: -42°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature uniformity: ±0.5 to ±1.5 K - Temperature change rates: - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation at +20°C: 4500 W Specifications for climate tests: - Temperature range: +10°C to +95°C - Dew point range: -3°C to +94°C - Humidity range: 10 to 98% r.H. - Temporal temperature deviation: ±0.1 to ±0.3 K - Spatial temperature uniformity: ±0.5 to ±1.0 K - Temporal humidity deviation: ±1 to ±3% r.H. - Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Nominal power: 11.5 kW Nominal current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 Important buyer information: The following procedures are carried out on all our chambers prior to sale: 1. Functional checks and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Rodpfx Aleyguw Ne Ist Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Internal Test Chamber Dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall Device Dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test Chamber Volume: 990 litres Temperature Testing: Minimum Temperature: -0°C Maximum Temperature: +90°C Temperature Change Rate, Cooling: 0.2 K/min Temperature Change Rate, Heating: 0.5 K/min Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Heat Compensation at +20 °C: 350 W Climatic Testing: Minimum Temperature: +10°C Maximum Temperature: +90°C Dew Point Temperature Range: +4°C to +89.5°C Humidity Range: 10 to 98% r.h. Temporal Humidity Deviation: ±1 to ±3% r.h. Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Uniformity: ±0.5 to ±1.0 K Voltage: 1/N/PE AC 230V ±10% 50Hz Rated Power: 2.3 kW Rsdpfx Aloygut Re Ijt Rated Current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for you as a buyer: The following measures are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Here we offer a Vötsch climatic test chamber. Model: VC³ 4100, air-cooled With a temperature change rate of 3 K/min Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Overall unit dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Chamber volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Temperature test specifications: Temperature range: -42°C to +180°C Rodpfxjygutws Al Iet Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4500 watts Climatic test specifications: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1% to ± 3% r.h. Max. heat compensation: 500 W Power supply: 3/N/PE AC 400V ±10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following points are checked and carried out on all our chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. If needed, fresh filling with legally compliant refrigerant 3. Leak check with certificate 4. After a successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See photo) (Subject to prior sale, changes and errors in technical data and specifications reserved!) We are happy to answer any further questions by phone.

Condition: excellent (used), functionality: fully functional, volume flow: 320 m³/h, operating pressure: 370 bar, power: 4.6 kW (6.25 HP), input voltage: 380 V, input current: 9 A, rotational speed (max.): 2,910 rpm, protection type (IP code): IP55, Vacuum pump - 2 units VACOM Rodpfeyxwp Hox Al Ist Type: VC 340-720 Power: 4.6 kW With central filter and Motan control - 2 units

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: MAJ5117A, controller model: FANUC F31i-B5, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, The machine was in use until it was decommissioned in 2024. The cab door and the 5th axis are not functioning properly. The fault has not been further diagnosed. The original purchase price of the machine was EUR 265,000! TECHNICAL DETAILS Spindle speed: 12,000 rpm Tool holder: BT40 BigPlus Tool positions: 60 MACHINE DETAILS Redpfx Aljymbz Is Ist Control: FANUC F31i-B5 Coolant pressure (IKZ): 70 bar EQUIPMENT: IKZ 5 axes with chuck

Condition: not inspected (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: MV0043-000317, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller model: Fanuc 0iM, Equipment: chip conveyor, The machine was in use until it was decommissioned in 2024. The only known limitation is that the tool changer is not functional. The original purchase price of the machine was EUR 193,000! TECHNICAL DETAILS Travel X-axis: 650 mm Rodpfx Aeyma H Njl Iet Travel Y-axis: 765 mm Travel Z-axis: 520 mm MACHINE DETAILS Control: Fanuc 0iM Rated apparent power: 53 kVA Coolant supply: 20 bar Input voltage: 380 V Type of input current: Three-phase current Mains connection: AC 380 V, 3~, PE, 50/60 Hz Rated power: 53.3 kVA Interrupting capacity: 5 kA Full load current: 84.1 A Short-circuit capacity: 10 kA Weight: 12,500 kg EQUIPMENT Documentation/manual Chip conveyor

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable, 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting capacity at 90 degrees with blade size 360 mm: Rjdsyu Hy Sjpfx Al Ist round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,150 net, loaded free of charge!

Condition: used, functionality: fully functional, Year of construction: 1995, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 14 mm, Equipment: safety light barrier, Hydraulic Shear Brand: Casanova Rjdpfx Aewy Nhqol Ist Model: VC-26 Year: 1995 Power: 30KW New WEINTEK control installed in 2020. Cutting length: 3100mm Maximum cutting thickness (steel): 20mm Maximum cutting thickness (stainless): 14mm Throat: 500mm Cuts per minute: 8-18 Backgauge: 1,000mm Manual blade gap adjustment via side levers. Front safety laser.

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm Redpfx Aeu I E Emjl Iot 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Rjdpfjx Slm Hex Al Ist Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: like new (used), Year of construction: 2007, operating hours: 33,988 h, Clamping force 50 kN Rsdjyvt Rbepfx Al Iet Screw diameter D18 mm Max. injection volume 25.4 cm³ Mounting plates 500 x 455 mm Total weight 3800 kg

Condition: excellent (used), Vötsch Type: VC 7018 Vötsch Climatic Test Chamber VC 7018 Water-Cooled Touch Panel Control Unit On the touch panel control unit, all control and operating commands can be triggered by simply touching the function symbols. Adjustable Feet To compensate for uneven floors and ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with port holes on the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Feedthrough included in standard equipment R1: NW 125 mm L1: NW 50 mm Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Characteristics for temperature tests: Temperature range: -70°C to +180°C Temperature ±0.1 to ±0.5 K Spatial ±0.5 to ±2.0 K Temperature change rate according to IEC 60068-3-5 Heating: 4 K/min Cooling: 2.3 K/min Characteristics for climatic tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.h. F. Temperature deviation over time in the center of the usable space ± 0.1 to ± 0.3 K Temperature deviation over space ± 0.5 to ± 1.0 K Temperature gradient 1 to 2 K Humidity deviation over time in the center of the usable space ± 1 to ± 3 %RH Electrical connection: Rsdpfx Aewgaykjl Iot Nominal voltage: 3/N/PE AC 400V ±10 50Hz Nominal power: 5.9 kW Nominal current: 12.0 A Connection cable: 3.5 m Fuse protection: 16 A slow-blow, provided by the customer Refrigerants: R-404A and R-23 Test chamber capacity: approx. 190 liters Weight: approx. 460 kg net For your safety, the following information is provided as a buyer! The following steps are performed on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 2013, KNUTH HFS 3063 VC - Hydraulic Surface Grinder Year: 2013 working area travel X-axis 765 mm travel Y-axis 340 mm workpiece weight (max.) 270 kg spindle axis-to-table surface distance 565 mm table dimensions 300x630 mm scale ring division Y-axis 0,02 mm scale ring division Z-axis 0,005 mm autom. transverse feed 0,1 - 8 mm autom. vertical feed 0,005 - 0,05 mm feed hydr. feed X 7 - 23 m/min rapid feed Y-axis 990 mm/min rapid feed Z-axis 460 mm/min drive capacity motor rating grinding spindle 5,5 kW Rjdpfxsyuvahj Al Ijt motor rating servo drive 0,5 kW measures and weights grinding wheels dimensions 350x40x127 mm overall dimensions 2800x2200x1890 mm weight 2700 kg Features: - automatic transverse and longitudinal feed - rapid feed for setup to desired work height - adjustable roughing, finishing and spark-out strokes - hydraulic longitudinal table movement on Y-axis - double table V-guide in transverse table, V-guide and flat guides in longitudinal table - table guideways are hardened, ground and PTFE (polytetrafuorethylene) counter-laminated - ensuring maximum wear resistance - external hydraulic unit ensures high temperature stability - automatic central lubrication system Accessories/options: 2-axis digital readout system grinding wheel halogen lights operator manual coolant tank with dust extraction system Under power in our warehouse!

Condition: excellent (used), Vötsch Type: VC³ 7018 Vötsch Air-Cooled Climatic Test Chamber Temperature Test: Temperature Range: -70°C to +180°C Temperature Rate: Heating 4 K/min Temperature Rate: Cooling 3 K/min Rsdpfx Ajx Hg Uujl Iet Climatic Test: +10°C to +95°C Humidity Range: 10% to 98% RH F. Temperature deviation over time: ± 0.1 to ± 0.3 K Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Nominal voltage: 400 V Nominal current: 14 A Nominal power: 5.5 kW Heat compensation 1500 W (at 20+) Weight: approx. 460 kg For your safety, please note the following information! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.