Used Vdi 50 for sale (35,072)

Year of construction: 2018, condition: used, functionality: unexamined, Sasso K500 CNC bridge saw (2018) Fgjdpszc Rgrsfx Aggeg 3 axis Also available from the same location - Bellani Modulo edge polisher (2010)

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. Fedsxrf Stopfx Aggjgg This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Max. panel length: 3200 mm Fodpjzvwqcofx Aggsgg Main saw blade projection: 150 mm No of Grippers: 9

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox Fedpfx Aozc Ni Sjggogg • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: like new (used), Year of construction: 1999, functionality: fully functional, power: 4 kW (5.44 HP), tool diameter: 50 mm, spindle mount: MK 5, height adjustment type: electric, rotational speed (max.): 2,500 rpm, rotational speed (min.): 28 rpm, total width: 1,120 mm, total length: 3,100 mm, total height: 3,396 mm, table width: 396 mm, table length: 1,820 mm, overall weight: 4,300 kg, year of last overhaul: 2026, Equipment: CE marking, cooling unit, documentation/manual, “CE” version, after undergoing a comprehensive overhaul including a new paint job in 2026, with functioning cooling system, complete with all documentation, fully operational. Option for testing available in the town of Dobříš, Czech Republic. Fgodpfx Aozy Samsggog

Condition: used, functionality: limited functionality, Year of construction: 2013, operating hours: 5,400 h, Stratasys Objet Connex 500 industrial multi-material PolyJet 3D printer available for sale in the UK. The machine has approximately 5,400 operating hours and powers up successfully. When inspected, the machine was not displaying print-head errors. The printer has not recently completed a test print because the printing materials/resins currently installed have expired. We are therefore selling the machine transparently as requiring recommissioning and fresh materials before full production operation can be confirmed. The Connex 500 is an industrial PolyJet additive manufacturing system designed for professional prototyping and multi-material applications. Its large build platform and ability to work with different material characteristics made the Connex range particularly suited to engineering, product development and prototype production. The machine was removed from a commercial environment and is now surplus to requirements. Known condition: Powers up successfully Approximately 5,400 operating hours No print-head errors observed during inspection Existing resin/material is expired Full print cycle has not been tested with fresh material Offered in its present condition Inspection welcomed prior to purchase This could represent a good opportunity for an existing Stratasys/Objet user, specialist reseller or refurbishment company familiar with the Connex platform. Fjdpezy Rwqefx Aggogg The machine is located in the United Kingdom. Further photographs and a video showing the machine powered on can be supplied on request.

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, clamping force: 500 kN, clearance between the columns: 305 mm, mold height (min.): 250 mm, plate length: 500 mm, plate height: 500 mm, total length: 3,450 mm, total width: 1,050 mm, total height: 2,000 mm, overall weight: 2,050 kg, Equipment: documentation/manual, Clamping force: 500 kN (50 tons) Column spacing (H x V): 305 x 305 mm Fodpszx Agnofx Aggegg Dimensions of the mounting plates: 500 x 500 mm Maximum mold opening stroke: 350 mm Minimum mold height: 250 mm Maximum distance between the plates: 600 mm Maximum screw stroke: 120 mm Injection pressure: up to approx. 1900 bar (depending on the screw diameter) Stroke of the hydraulic ejector: 80 mm Machine weight: approx. 2050 kg Overall dimensions: approx. 3450 x 1050 x 2000 mm Defective control system!!!

Condition: used, empty load weight: 6,170 kg, maximum load weight: 32,830 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 12/2019, next inspection (TÜV): 11/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: black, Year of construction: 2019, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 41483 Koegel, Tautliner * Year of manufacture: 2019 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Alloy wheels * Air suspension * Edscha / Sliding roof tarpaulin * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Pallet stop bar * DCE 9.5 Daimler Chrysler certificate * Portal door * Air coupling head (red + yellow) * 2x7-pin connector plug * 15-pin connector plug * Lifting and lowering mechanism * Storage box / toolbox * Document box * Inspections: MOT / emissions test valid until 11/2026 * Suspension: Air * Gross vehicle weight: 39,000 kg * Tare weight: 6,170 kg * Payload: 32,830 kg * Permissible gross vehicle weight: 39,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% - 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L=13,620 mm, W=2,480 mm, H=2,700 mm * Internal volume: 91 m³ * Pallet spaces: 34 Fedpfxozw Txrj Aggegg Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust cutting mill Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 4 rows of stator knives Cast iron rotor, inlet 340x150 mm, Sieves with 3-2.5-1 mm 4 rows of hammers with 5 hammers each The delivery scope also includes: Alpine Classifier MZM 160x500, fan 7.5 kW, rotary valve, some piping Fjdszl E Stspfx Aggogg A control cabinet is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in the Netherlands. The details for optimal transport need to be clarified. The machine price is quoted excluding packaging on a pallet.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 394F00438, Year of construction: 2015, operating hours: 9,935 h, load capacity: 5,000 kg, lifting height: 4,354 mm, fuel type: diesel, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,354 mm Mast height: 3,050 mm Fork length: 1,200 mm Fork width, maximum: 1,260 mm Fork width, minimum: 330 mm MACHINE DETAILS Fgedpfxszxci As Aggjg Mast type: Duplex Number of wheels: 4 Fuel type: Diesel Engine manufacturer: Linde Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,190 x 3,050 mm Unladen weight: 6,655 kg Operating hours: 9,935 h EQUIPMENT Side shifter Joystick Work light Documentation CE marking

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 20,000 W, total height: 1,900 mm, total width: 2,100 mm, overall weight: 3,500 kg, controller manufacturer: HEIDENHAIN, controller model: MANUAL plus 620, product length (max.): 3,300 mm, number of axes: 3, Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine. Fedpozvx Agefx Aggsgg - Spindle Speed: 1 - 3,000 RPM (Stage 1: 1 - 750 RPM, Stage 2: 1 - 3,000 RPM)- Spindle Power (100/60% ED): 20 / 25 kW- Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)- Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3- Through-Spindle Coolant: No- Counter Spindle: No- Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)- Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)- Max. Tool Weight: No info- Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)- Positioning Accuracy: According to DIN 8605- X-axis Travel: 260 mm- Z-axis Travel: 1500 mm (center distance)- C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)- Bed Width: 350 mm- Turning Tool Cross Section (H x W): 25 x 25 mm- Spindle Diameter in Front Bearing: 130 mm- Inner Taper of Main Spindle: Metric 100- Maximum Spindle Torque: approx. 1400 Nm- Feed Force Z-axis: 10,000 N- Feed Force X-axis: 7,000 N- Feed Range (Longitudinal/Planar): mm/rev- Rapid Traverse Speed X/Z: 10 / 7 m/min- Tailstock Quill Diameter: 90 mm- Tailstock Quill Stroke: 180 mm- Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)- Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 41 KVA- Current Rating: 60 A- Main Fuse: 63 A - Additional Equipment: - Chip protection wall, 2 movable sliding safety doors with windows, machine light, Quick-change tool holder size C, coolant device, live center MT 5, operator tool set, linear scale in X-axis, safety clutch in X and Z axes- Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min- Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor- Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system- Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center- Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center- Zero-Point Clamping System: base part mounted on cross slide- Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage- Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5.

Condition: refurbished (used), Year of construction: 2006, machine/vehicle number: R-00683, load capacity: 50 kg, arm reach: 2,050 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C302#EGN, Refurbished FANUC M-710iC/50 manufactured in 2006.06. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/50 Model Number: A05B-1125-B201 Year of Manufacture Robot: 2006.06 Warranty term (months): 12   Payload (kg): 50 Reach (mm): 2050 Repeatability (mm): ± 0.03 Controlled Axes: 6-axis Fedpfjzz Rxdex Aggogg Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 560   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2006.06 RCC Length (m): 7   Teach Pendant: A05B-2518-C302#EGN Teach Pendant Cable Length (m): 12

Condition: used, empty load weight: 6,800 kg, maximum load weight: 32,200 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 06/2020, next inspection (TÜV): 09/2026, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 93 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: white, Year of construction: 2020, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Reference no. for inquiries: 41566 Krone, SD * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Tail lift * Air suspension * Used tarpaulin * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Air connection, coupling head (red + yellow) * Air connection, Duomatik * Connector plug 2x7-pin * Connector plug 15-pin * Lifting and lowering mechanism * Storage box / Tool box * Inspections: MOT / Emissions test valid until 09.2026 * Suspension: Air * Total weight: 39,000 kg * Unladen weight: 6,800 kg * Payload: 32,200 kg * Permissible total weight: 39,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 70% - 70% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 80% - 70% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 50% - 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 13620 mm, W = 2480 mm, H = 2780 mm * Internal volume*: 94 m² * Pallet spaces: 34 * Tail lift: BÄR Cargolift 2500 kg * On request, we will send you a video and further pictures. Disclaimer: Subject to changes, prior sale, and errors. You can find further pictures and videos on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Fgodpeztu Erofx Aggog Please ask our trained staff, we will be happy to advise you.

Condition: excellent (used), Year of construction: 2010, operating hours: 70,257 h, functionality: fully functional, overall weight: 645 kg, input voltage: 415 V, We have for sale a 2010 FANUC M-710 iC 50s robot with a 30iA controller in very good condition. please see the photos for run times. just been greased and tested Fsdjzxrqcspfx Aggegg

Condition: used, Year of construction: 1998, Used 2500 mm bending machine by Safan Type: SMK 50 2550 TS1 Capacity: 2550 x 50 tons Fodpezvyg Hefx Aggegg TS1 CNC control Y1, Y2, X, R, Z1 and Z2 Year of manufacture: 1998

Condition: used, Euromac PB 350S Horizontal bending machines Euromac horizontal bending machine. with related equipment. serial number 90/52901/12, Oct 1990. With large amount of tooling as shown in images below. Fgodpfxszh Rf De Aggog

Condition: used, Homogenizator tłokowy produkcji GEA Niro Soavi model NS3006H. Maksymalny przepływ do 50 l/godz. Maksymalne ciśnienie pracy do 1500 bar. Urządzenie jest wyposażone w pompę i lokalne sterowanie. Całość zamontowana na przejezdnej ramie ze stali kwasoodpornej. Fjdpfxozinb So Aggsgg

Condition: used, empty load weight: 6,800 kg, maximum load weight: 32,500 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 05/2020, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, total length: 13,620 mm, suspension: air, tire size: 385/65 22,5, tire condition: 70 %, color: white, Year of construction: 2020, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, tail-lift, truck registration, Reference no. for inquiries: 41480 Krone, SD * Year of manufacture: 2020 * ABS, Anti-lock Braking System * EBS, electronic braking system * Tail lift * Alloy wheels * Air suspension * Used tarpaulin * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Lashing eyelets in the outer frame (Multilock outer frame) * Portal door * Air connection, coupling head (red + yellow) * Air connection, Duomatic * Connection plug, 2x7-pin * Connection plug, 15-pin * Lifting and lowering device * Storage box / Tool box * Suspension: Air * Total weight: 39,000 kg * Tare weight: 6,800 kg * Payload: 32,500 kg * Permissible total weight: 39,300 kg * Axle manufacturer: Krone * Tire condition 1st axle: 50% – 50%, Tire size: 385/65 R22.5 * Tire condition 2nd axle: 90% – 90%, Tire size: 385/65 R22.5 * Tire condition 3rd axle: 80% – 30%, Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 13620 mm, W = 2480 mm, H = 2680 mm * Internal volume: 91 m³ * Pallet spaces: 34 * 5 stanchions per side * Tail lift: BÄR Cargolift 2500kg * Upon request, we will send you a video and further images. Disclaimer: Subject to changes, prior sale, and errors. Further images and videos can be found on our website. Our extensive service includes, for example: * Purchase / Sale / Rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service Fgsdpfx Agoyicciegeg * Transport of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 7687, Year of construction: 2010, operating hours: 23,542 h, load capacity: 6,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,490 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 6,000 kg Lifting height: 5,000 mm Overall height: 3,490 mm Fgodpszy U Tpjfx Aggeg MACHINE DETAILS Mast type: Simplex Fuel type: Diesel Operating hours: 23,542 h EQUIPMENT Pantograph External reference: SLO187

Condition: excellent (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Z45, feed length X-axis: 1,200 mm, feed length Y-axis: 700 mm, feed length Z-axis: 500 mm, feed rate X-axis: 1 m/min, feed rate Y-axis: 1 m/min, feed rate Z-axis: 1 m/min, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 2 m/min, rapid traverse Z-axis: 1 m/min, position of the milling head: pionowa, spindle speed (max.): 2,050 rpm, spindle speed (min.): 30 rpm, total height: 2,180 mm, total length: 2,475 mm, total width: 2,260 mm, rotational speed (max.): 2,050 rpm, rotational speed (min.): 30 rpm, overall weight: 5,000 kg, table length: 1,600 mm, workpiece weight (max.): 1,800 kg, table load: 1,800 kg, table width: 500 mm, torque: 18 Nm, Equipment: rotational speed infinitely variable, Universal milling machine EUROMETAL FUS 50, year of manufacture 2021, equipped with a T-slot table 1500x500mm, servo motors on three axes X, Y, Z controlled by manual handwheels or automatic feed function, rapid traverse, digital parameter readout, ISO 50 spindle taper, mechanical spindle speed adjustment range 50-2050 rpm, swiveling vertical milling head, spindle brake for tool change, automatic central lubrication system, cooling system, work light, ER40 tool holders and holders for the head; traverse range X – 1200mm, Y – 700mm, Z – 500mm. The milling machine is in perfect condition after approx. 100 hours of operation. Fsdpfoy Nmngox Aggegg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 8696, Year of construction: 2015, operating hours: 7,673 h, load capacity: 5,000 kg, lifting height: 4,500 mm, fuel type: gas, mast type: simplex, construction height: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,500 mm Overall height: 3,100 mm MACHINE DETAILS Mast type: Simplex ISO class: 3 (2,500–4,999 kg) Drive type: Internal combustion engine Operating hours: 7,673 h Fsdezy U Sropfx Aggogg EQUIPMENT Fork positioner Heater Full cabin External reference: SL9839SP

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg Fgodsziz S Depfx Aggog • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting height (max.): 50 mm, cutting width (max.): 3,300 mm, saw blade diameter: 300 mm, Equipment: documentation/manual, type plate available, For sale: SIGMA PRIMA 50 panel saw (2016) with label printer – precision, power, and reliability in one! We offer a professional Sigma Prima 50 panel saw from 2016 – an ideal solution for carpentry workshops, furniture factories, and companies involved in the production of wood-based panel components. Fgsdpfjzqc E Ijx Aggog Why choose it? 1. Highest level of cutting precision – a stable structure and high-quality guides guarantee perfectly straight and repeatable cuts. 2. Powerful and efficient motor – easily handles MDF, particleboard, laminate, or solid wood. 3. Large panel table – comfortable processing even of large-format panels. 4. Scoring saw – perfect edge finishing without chipping. 5. Year of manufacture 2016 – modern design, proven and ready for work. 6. Connected label printer, ensuring that each component is accurately labeled, preventing errors during assembly. Ideal for: 1. Production of custom-made furniture 2. Serial processing of panels 3. Companies producing prefabricated houses 4. Precision carpentry work 5. Businesses that value quality and efficiency The machine is in good working order, robust, durable, and designed for intensive use. It is an investment that will quickly pay for itself thanks to increased efficiency and accuracy. Contact us for more information, photos, or to arrange a viewing. Don't miss this opportunity – a professional panel saw in very good condition is a guarantee of quality for years to come! We purchased a new model, so this one is being sold. Price: 96,500 PLN net Tel. 666-609-957

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, OptiCut S 50+ optimizing saw - Feeding system with transverse conveyors and automatic pusher - Outfeed conveyor belt with 2 zones, including ejectors and tables, one of which is foldable - Saw motor: 7.5 kW Fsdezkbmdopfx Aggogg - Boards/planks up to 5 meters long can be fed into the machine. - Maximum cutting cross-section: 270 x 100 mm Additional technical information and a video are available upon request.

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm Fgodpfxezyu Ume Aggsg z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table