Used Veneer Guillotine for sale (1,415)

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with a jointing unit (planing unit) and a veneer support table. Robust machine construction by Langzauner. Fodpfx Aae Afznujnjpp A video of the machine in operation can be sent upon request. For tear-free and gap-free cutting of veneer, including thick veneer. Cutting length max. 3500mm. Cutting and jointing height max. 40mm. Easily guided unit, runs on two hardened, ground linear guide shafts. Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display. The support table is very robustly constructed and runs on parallel round guides; it is slightly offset to the right so that cross-cuts can be made on the left side of the veneer packs. Angle stop on the support table and on the front support for end cuts of the veneer packs. Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from warping. Pneumatic workpiece clamping, also holds in the center position. Drive motor saw 2.2kW, milling unit 1.1kW. The motors can be conveniently switched on at the handle and only run when needed. When switched on, the saw and milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions via a turret stop. Carbide-tipped precision cutting blade, sharpened. Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included. Practical front veneer support, which is automatically extended pneumatically when using the planing unit. Extraction connection 150mm with extraction duct. V-belt renewed. CE marking. Emergency stop cord. Operating manual. Onboard tools. Original paint, only a few spots have been touched up. The machine is in excellent condition and has clearly been used only rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on-site by appointment. We only offer machines that are in our warehouse and ready for demonstration, see "other offers from this provider".

Condition: ready for operation (used), Year of construction: 2002, Available immediately ex-yard: Hydraulic plate shear Baykal Type HGL 3100 x 6 Year of manufacture 2002 Cutting length 3060 mm Steel 6 mm Stainless steel 4 mm Distance between uprights 3100 mm Hydraulic hold-down clamps 16 pieces Strokes/min 15 Fodpfxo Afcmle Aanepp Controlled back gauge 6 - 1000 mm Cutting angle 1.6 degrees Drive power 19.5 kW Weight 6300 kg Price: EUR 8,500.00 plus VAT, ex-yard.

Condition: used, Year of construction: 2011, Manufacturer: Magurit Model: FROMAT 053 Year: 2011 Condition: Used Serial Number: 6159 Stock Number: 3390 Capacity max: 4000 kg/h Block size: block length x 450 x 250 mm Temperature: max - 25 °C Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 5.5kW Fpodps Aigb Dofx Aanjp Dimensions: 2100 x 900 x 1900 mm Weight: 660 kg

Condition: good (used), functionality: fully functional, Year of construction: 2002, Used plate shear from Safan Type HT 430 16 Capacity 4300 x 16 mm Adjustable back gauge, cutting angle, and cutting clearance Pneumatic hold-down table at the rear for thin materials Includes square guide and support arms at the front Fpsdps Ahwt Isfx Aansp

Condition: good (used), functionality: fully functional, Year of construction: 1993, Used Hartman plate shear Fsdps Ai E Iqjfx Aanepp Type: HERA 3080 6 Capacity: 3080 x 6 mm Electrically adjustable back gauge

Condition: good (used), Adast Maxima MS 58S Guillotine The machine is fully operational, in excellent technical and visual condition. It has just been serviced. The set includes a spare knife, cutting stick, paper stacker, and tools. Technical specifications: Working width: 580mm Stack height: 85mm Power supply: 380V Weight: 450kg All key components are made of cast iron, including a flywheel and adjustable pressure force – this is a professional production guillotine in a compact design. Fpodpfjz Rk Naex Aanep Electronic approach controller, cutting line, and safety guards.

Condition: good (used), Ideal 4705 Paper Cutting Guillotine This is a currently manufactured guillotine model from the renowned German manufacturer Ideal. Very good condition, ready for production. Description: – Cutting length: 475 mm, – Cutting thickness: 70 mm, – Minimum scrap: 30 mm, – Maximum distance from the knife to the saddle: 455 mm. Safety Cutting System includes: a lifting, transparent safety cover (blocks cutting when the knife cover is open); a safety lock (blocks the knife lever in the upper position); safe cutting depth adjustment (from the outside of the machine); cutting blades can be easily and safely rotated and replaced; a knife made of high-quality „Solingen” steel; a sturdy steel knife carrier; a sturdy pressure plate lowered by a wheel (full control of the pressure force adjustment depending on the type of paper being cut); a rear stop adjusted by a crank; a measuring tape in millimeters and inches; Solid metal construction; Fodpfx Aasz Rk Ngenjpp The set includes a table for the machine, a spare cutting stick, an instruction manual, and a spare knife.

Condition: excellent (used), Year of construction: 2006, Ref:11130 . 2006 Perfecta SL-10P Pile Lift Fpedszmycpopfx Aanep Comprising; Perfecta SL-10P Mobile pile lift with steel plate. Keeps pile at a constant height, electronic eye for automatic lifting/ lowering. Casters for mobility. Swinging control panel for left or right side use Lowering safety device, 1,5 kVA - 380 V. Lifting capacity 1000 kg, maximum size 90 x 130 cm. Specification: Maximum Paper Size: 76 × 109 cm to 110 × 165 cm (depending on the exact sub-variant). Stack Height Capacity: Up to 160 mm Power requirements : 3pH, 380-415V, 1.5kW.

Condition: ready for operation (used), Year of construction: 1989, Available immediately ex works: Hydraulic plate shear Atlantik Type ATS 3012 Year of manufacture 1989 Cutting length 3050 mm Material thickness up to 12 mm Cutting angle adjustment 0.5 – 3 degrees Hydraulic hold-down clamps, 18 pieces Electric back gauge, 1000 mm Drive power 25 kW Fjdpfx Aas Aa Ipbjnspp Weight 9 tons Price: Euro 7,000.—plus VAT ex works.

Condition: ready for operation (used), Year of construction: 1980, Höfer H65S heating plate press Disassemblable design Heating power with energy-saving mode: 7.8 kW, normal: 15.6 kW Pressing area: 2500 x 1300 mm Operating pressure: max. 65 tons 4 cylinders Space requirement: 2890 x 1460 x 1650 mm Fsdpfj Ahyycex Aanopp Year of manufacture: 1980

Condition: used, Year of construction: 2019, LANGZAUNER LZT 70 – hydraulic veneer press, manufactured in November 2019. Fsdpfx Ae Ahzqweanepp - Four press cylinders - Pressing force: 70 t according to the manufacturer's brochure - Press plate size: 2,500 × 1,300 mm according to the manufacturer's brochure for LZT 70 - Electric plate heating - Connection: 3 × 400 V + N + PE, 50 Hz - Connected load: 19.3 kW according to the nameplate Collection possible from December 15, 2026, at the latest by February 28, 2027. Inspection by appointment. Disassembly, loading, and transport upon agreement. Price upon request.

Condition: used, Year of construction: 1961, Used Machine Features and Technical Specifications: Platen size: 2500 x 1300 mm Machine is designed for disassembly Fodpfezyy Apex Aanepp Total pressing force: 60 metric tons With 6 pistons, each 60 mm Specific pressing force: 1.85 kg/cm² Plate spacing: 350 mm L x W x H approx. 3230 x 1340 x 1775 mm Availability: immediately Location: Rhineland-Palatinate

Condition: used, functionality: fully functional, Year of construction: 1984, sheet thickness (max.): 6 mm, total length: 3,510 mm, total width: 1,850 mm, total height: 2,030 mm, cutting length (max.): 3,050 mm, We are offering this used Toolmaster TS 306 metal shear, manufactured in 1984, for sale. Type: TS 306 Year of manufacture: 1984 Voltage: 380 V Capacity: 6 mm x 3050 mm Serial number: 65 530 Fsdpoz Sdycsfx Aanopp If you have any questions or require further information, please do not hesitate to contact us.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1969, machine/vehicle number: HS 205-4, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 2 mm, table height: 900 mm, back gauge: 1,000 mm, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 175 bar, overall weight: 2,500 kg, total length: 2,600 mm, total width: 1,950 mm, total height: 1,400 mm, Equipment: emergency stop, foot remote control, A Wila brand plate shear in very good condition. It is comparable to the Safan brand. The machine is somewhat older. The back gauge moves very smoothly, but currently needs to be adjusted manually. It does not have a drive mechanism. Fpjdpfx Aez Dgtteanop

Condition: good (used), Stanko Import Place and cut. The machine is ready for operation and can be inspected at any time. Loading with a crane is possible. Fsdpfx Ae Ah Urteanopp Technical data Machine type: Plate shear Manufacturer: STANKO Year of construction: 1985 Control: conventional Sheet width (cutting length): 2,000 mm Max. sheet thickness: 4.0 mm (steel) Frame width: 2,280 mm Cutting angle of the upper blade: 1°30′ Back gauge: adjustable, manual 0 – 680 mm Stroke rate: 60 strokes/min Height above floor: 900 mm Operating voltage: 380 V / 50 Hz Total power consumption: 11.8 kW Machine weight: approx. 3,270 kg Space requirement (L × W × H): approx. 3.0 × 0.7 × 1.55 m Heavy-duty, torsion-resistant industrial design Blades in good condition Manually adjustable back gauge Consistent

Condition: used, Year of construction: 2020, total length: 3,000 mm, total width: 1,300 mm, total height: 1,900 mm, Veneer press Manufacturer: Stema S.r.L. Type: P – 90 C Year of manufacture: 2020 Dimensions (l/w/h): 3,000 x 1,300 x 1,900 Weight: approx. 3,800 kg Pressing force / pressure: 70 – 90 t Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please do not hesitate to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial businesses. Fodpfjz Ip H Rox Aanepp Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is the automated cutting system for professionals who demand speed, accuracy, and efficiency. Equipped with premium Morso guillotine blades, it delivers perfect 45° corners in wood, plastic, and MDF—consistently, every time. With a capacity of over 500 frames per hour, you can significantly increase your production output. At the same time, you drastically reduce material waste: just 1 mm cutting loss per cut, compared to up to 6 mm with conventional saws. Smart automation features include: Automatic loader handling up to 13 lengths Precision clamping system for maximum stability Integrated splitter to sort cut pieces and remove waste automatically Full control via a Mitsubishi touchscreen and PLC system, combined with reliable SMC pneumatics. Fpodpfxjw U D E Es Aanep The result: higher output, lower waste, and consistent premium quality—exactly what your production line needs.

Condition: used, total length: 3,400 mm, total width: 1,700 mm, total height: 1,950 mm, Year of manufacture: 2026 Colour: White Empty weight: 2.000 kg - Details: - └ Description: New - Year: 2026 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: Pro.b 301365530.166 - Operating hours: 0 - Main motor power [kW]: 1.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 3000 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 535 - Total stroke [mm]: 535 - Number of work zones [pcs]: 1 - Number of levels [pcs]: 0 - Plate material: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 60 - Total pressure [Ton]: 70 Fpsdpo Abt Swofx Aanop - Options: Mylar protection - Voltage [V]: 400 - Current consumption [A]: 5 - Fuse [A]: 16 - Power [kW]: 1.5 - Transport dimensions: 3400mm x 1700mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), OTT Model JU 2510 Hydraulic veneer press with electric heating plates Under-plunger design Central control panel with all operating elements Analog temperature display for both heating plates Press pressure can be adjusted continuously by means of a pressure switch Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Safety pull cord Rack-and-pinion compensation Pressing area 2500 x 1100 mm Number of press cylinders 4 Total pressing force 70 t Operating voltage: 3 x 400 V + N, 50 Hz. Fedpe Ahytljfx Aanjpp Total connected load approx. 20.3 kW Space requirement (L x W x H) approx.: 2960 x 1240 mm Weight: approx. 2900 kg

Condition: good (used), Year of construction: 1980, overall weight: 18,000 kg, Used plate shear from Safan Fpjdpfx Aae Ahwpgjnsp Type: VS 620 4 Capacity: 6200 x 4 mm Electric back gauge Manually adjustable cutting clearance and cutting angle Equipped with a pneumatic hold-down table at the rear Includes a square guide

Condition: used, Year of construction: 2019, machine/vehicle number: 197341119, input voltage: 400 V, input frequency: 50 Hz, pressing force: 120 t, table width: 1,400 mm, table length: 3,200 mm, ITALPRESSE XL/8-S – Thermoil-heated platen veneer press Year of manufacture: 2019 Machine number: 197341119 Press area: 3,200 x 1,400 mm Pressing force: 120 tons Heating: Thermoil with electric boiler Fpjdpfx Ae Agxfgjansp Electrical connection: 400 V / 50 Hz Hydraulic veneer press with control unit and hydraulic unit, as shown in the photos. Press area and pressing force according to the delivery note; year of manufacture and machine number according to the nameplate. Location: Basel area, Switzerland. Inspection possible until early December 2026 by appointment. Dismantling and removal between December 8th and 18th, 2026, after coordinating a schedule. Price upon request. Scope of delivery and current operating condition to be agreed upon. Subject to change and errors.

Condition: used, functionality: fully functional, Year of construction: 2007, Used 3-meter guillotine shears from HM Type: MPS 30 25 Fjdpfj Ahgtxex Aanepp Capacity: 3100 x 2.5 mm (steel) Mechanically driven (40 strokes/min) Adjustable back gauge Year of manufacture: 2007

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 4 mm, SOMO SHEARING MACHINE 4050 X 4 Fodpfx Aozz Siweanjpp MODEL: SC 40/4 MOTORIZED GAUGE GULLET: 500 HYDRAULIC PRE-CLAMPING DEVICES INSPECTED USED MACHINE, IN WORKING CONDITION INTERNAL CODE: SVR 439

Condition: ready for operation (used), Year of construction: 1990, Ott 2513, Heavy-duty Veneer Press 4 cylinders Pressing area: 2500 x 1300 mm Heating: electric Opening and closing: electric Pressing force: 90 tons Year of manufacture: 1990 Fpjde Ahx Ucspfx Aansp Price: 6,500.-

Condition: good (used), Year of construction: 1983, Sheet metal width: 6200 mm Fpedpfx As Ai Dlboansp Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Machine weight (approx.): 19 t