Used Veneer Lathe for sale (5,889)

Condition: good (used), turning diameter over cross slide: 510 mm, turning length: 500 mm, turning diameter: 320 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-200/500 CNC Lathe Year: around 1999 Machine Type: CNC Turning Center (2-Axis) Control System: Mori Seiki SMC-500 Maximum Turning Diameter: approx. 320 mm Hedex Hpx Nepfx Ah Ueg Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 65 mm Maximum Bar Capacity: approx. 51 mm Spindle Speed: up to 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 10 Stations Tool Size: 25 mm Machine Weight: approx. 4,500 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: excellent (used), Year of construction: 2009, Josting Veneer Guillotine with Cross-Cutting Machine The machine precisely cuts veneer bundles in a straight and parallel manner. For all types of veneer, tight jointing after cutting is ensured. Hodpfx Ahjx N A D Re Ueg Technical features: ● Highest cutting quality thanks to an oscillating knife movement, pulling at an angle of approx. 20°. ● Parallel fence with motorized rapid adjustment, fine adjustment, and digital measurement display for cutting parallel widths and strips. ● The green alignment light clearly marks the cutting line. ● Alignment grooves and an angle stop on the machine table facilitate positioning of the veneers. ● The wide pressure beam presses even wavy veneers flat and level before cutting. ● The trim-cut function hydraulically adjusts the knife beam by 0.9 mm. Square cutting edges are achieved by pre- and post-cutting with pressed veneer bundles. ● Cutting veneers across the grain is possible thanks to the powerful crank drive. ● The heavy construction safely absorbs the high pressing and cutting forces. ● Precise and durable parallel guidance of machine components. ● Full utilization of the knife due to 30 mm regrinding capability. ● Low energy consumption and reduced noise levels due to intermittent drive operation. ● Safety features include light curtain interlock, two-hand operation, safety electrical control system, and rear safety guard in accordance with occupational safety regulations. ● The machine can also cut paper, foils, plastics, and other materials. Cutting length: 2800 mm Insertion height: 80 mm Parallel fence range: 20 - 570 mm Pressure beam: 2 pressure stages Knife beam: Brake motor, gearbox crank drive Parallel fence: Three-phase motor, positioning drive Electrical connection: 7.7 KW Footprint (with parallel fence): 414 x 155 cm Height: 170 cm Weight: 3500 kg Includes: KUPER QFS 850 cross-veneer guillotine for trimming veneer packs Location: ex-site customer - immediately available - System must be dismantled by the buyer

Condition: new, Year of construction: 2024, Nieuw in het programma van LTC, metaaldraaibank LTC DR 750 G. Geschikt voor werkplaats en hobby. Volledig tandwielgeschakelde aandrijving van hoofdas. Dit vergroot het over te brengen vermogen in de lage toeren t.o.v. variabel aangedreven hoofdas. Ook een voordeel is het wisselen van toerental. Dit gebeurt aan voorzijde schakelkast d.m.v. schakelhendels. Dus geen riem verleggen. Verder is de voedingskast compleet voorzien van tandwielen. Ook hiervoor geldt dat het wisselen van voedings snelheid of spoed schroefdraad gebeurt door schakelhendels aan voorzijde nortonkast. Dus geen gewissel met wisselwielen. Met inductiegehard en geslepen prismabed. CE uitgerust. Metaaldraaibank word standaard geleverd met: Drieklauw 160mm Vierklauw 160mm Spanenbak en achterscherm Onderstel Langsvoeding Dwarsvoeding 4-slag beitelhouder Vaste en meelopende bril Led verlichting Separate noodstop Toebehorenkist met wisselwielen, vaste centers, oliespuit etc. NIEUW: nu ook met koelinrichting Optioneel: Snelwisselbeitelhouder Digitale uitlezing Sino Draaibank is van prima kwaliteit. Machine is te bezichtigen op afspraak, met uitleg en demo. Met 1 jaar fabrieksgarantie. Verder verlenen wij prima service en zijn onderdelen van machine beschikbaar. Prijs is € 2550,00 ex btw Met Sino € 2850,00 ex btw Leverbaar in 230V en 400V. Motor 1,1kw Hjdpsigkv Ejfx Ah Usg Afstand tussen centers 750mm Opname losse kop MK3 Verplaatsing pinole 80mm Doorlaat hoofdas 38mm Spindelopname hoofdas MK5 Draadsnijden metrisch: 18 standen van 0,2 - 3,5mm/omw Draadsnijden inch: 39 standen van 4 1/2-48 1/n" Draadsnijden moduul: 18 standen van 0,2 - 1,5mm Draadsnijden pitch: 24 standen van 16 - 120 1/n" Draaidiameter over bed 320mm Draaidiameter support 195mm Dwarsverplaatsing support 200mm Toerental spindel 90-1800 omw/min Verplaatsing beitelsupport 120mm Voedingsbereik langs 0,05-0,35 mm/omw (12 traps) Netto gewicht 320 kg Voltage 230V en 400V Afmetingen (opgebouwd) LxBxH 1.46x0.75x1.28M (met Sino 1.52M hoog)

Condition: not inspected (used), Year of construction: 2002, turning diameter over cross slide: 340 mm, turning length: 2,000 mm, turning diameter: 570 mm, spindle speed (max.): 2,500 rpm, overall weight: 5,000 kg, Fagor 8055 Spindle bore 108 mm Capacity 2000 x 570 mm Steady rest Hsdpfx Aox E Au Ijh Uog

Condition: used, Year of construction: 2010, turning diameter 370 mm turning length 424 mm Hjdpfoxzk Rtox Ah Ueg control Fanuc

Condition: good (used), Year of construction: 2002, CNC LATHE MUPEM WIN 65 2002 Max. bar capacity: 65 mm Front spindle bearing diameter: 110/150 mm Collet clamping system up to Ø: 60 mm HAINBUCH collet system up to Ø: 65 mm Maximum spindle speed: 3000 rpm Main spindle motor power: 11/15 kW Hedowc Aruspfx Ah Ueg MAIN TURRET Number of tools: 8 VDI-30 Maximum working stroke in Z: 50 mm Rapid traverse speed: 15 m/min Feed force: 6790 N CROSS SLIDE Number of horizontal slides: 2 Maximum working stroke at X1/X2: 70 mm Feed force at X1/X2: 8000 at 50 bar Maximum working stroke at Z1: 230 mm ADDITIONAL LOWER TURRET Number of tools: 8 VDI-20 VERTICAL SLIDES Number of vertical slides: 2 Maximum working stroke in X3 / X4: 70 mm Manual length adjustment: 50 mm Rapid traverse speed: 15 m/min Feed force at X1 / X2: 8000 at 50 bar Machine height: 1700 mm Machine area: 2900 x 1700 mm Machine weight: 4100 kg

Condition: ready for operation (used), Year of construction: 1984, spindle bore: 81 mm, center height: 315 mm, center width: 2,000 mm, overall weight: 3,100 kg, Heidenhain 2-axis digital readout, external electrical cabinet, capacity 2000x725 mm, spindle bore 81 mm, multifix turret, steady rest Hjdpfox H Sdnsx Ah Ujg

Condition: used, Year of construction: 2011, turning diameter 200 mm control DMG Hedpfx Ahoxuv Scs Ueg weight of the machine ca. 5200 kg

Condition: excellent (used), Year of construction: 1995, CNC lathe AVM Angelini Type Snupy E 415 Year of manufacture 1995 CNC control Fanuc 21 i-T Swing diameter 415 mm Turning length 600 mm Speeds up to 4500 rpm Spindle power 15 kw Revolver 11-way Ejector collecting device Tools Motorized automatic tailstock Hsdovt U H Hepfx Ah Ujg Tools Weight 4 tons

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 6,000 rpm, overall weight: 6,500 kg, fanuc 18ITB Workpieces diameter 130 mm, length 110 mm Spindle speed 7,500 rpm Turret with 12 stations Hsdpex Irzvefx Ah Ujg Max. tool speed 6,000 rpm Power 24 kW

Condition: used, Year of construction: 2007, turning diameter 246 mm turning length 445 mm control Fanuc 32 Hjdsxuv R Sepfx Ah Usg weight of the machine ca. 4250 kg

Condition: excellent (used), CNC vertical lathe Gildemeister CTV 250 Working area: Chuck diameter: 250mm Hjdpfx Aovuqm Seh Usg X-axis: 800mm Z-axis: 300m Spindle head: 170 h5 Spindle diameter in the front bearing: 120mm Spindle bore: 79mm C-axis Number of work stations: 12 Videos available!!

Condition: ready for operation (used), Year of construction: 2007, turning diameter over cross slide: 300 mm, turning length: 1,100 mm, turning diameter: 590 mm, spindle bore: 82 mm, spindle speed (max.): 2,500 rpm, overall weight: 2,500 kg, Siemens control Multifix turret type C Spindle bore 82mm, max spindle speed 2500 rpm Capacity 1100 x 590mm 300mm on cross slide Hedpfx Ahex H R Tho Ueg Weight 2500kg

Condition: used, Year of construction: 2005, control Traub TX8i Hjdpfexzk Rmsx Ah Ueg weight of the machine ca. 4000 kg

Condition: excellent (used), Year of construction: 1989, Weisser Heilbronn GIGANT CNC Lathe 1989 Control: Heidenhain Turning diameter over bed: 1400 mm Turning diameter at faceplate: 1200 mm Hodpjwmnqwjfx Ah Uog Turning diameter over cross slide: 1080 mm Max. turning length: 1300 mm Spindle motor: 45 kW Accessories: Faceplate, jaws, tool holder, chip conveyor, documentation

Condition: ready for operation (used), Year of construction: 1987, turning length: 260 mm, turning diameter: 180 mm, Fanuc OT 10-position turret Hedex Ikunepfx Ah Usg maximum spindle speed 4500 rpm weight 2300 kg

Condition: ready for operation (used), Year of construction: 2008, Fanuc 21ITB 16-tool changer BT50 1600 mm table, maximum rotation speed 250 rpm, maximum admissible weight 8000 kg Hsdpjwzyndofx Ah Ueg maximum diameter 2000 mm, maximum machining height 1250 mm travel 250 x 250 mm, Z-axis travel 900 mm chip conveyor

Condition: ready for operation (used), Year of construction: 2003, turning diameter over cross slide: 200 mm, turning length: 750 mm, turning diameter: 360 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, rotational speed (max.): 3,000 rpm, overall weight: 1,600 kg, Order number Spindle bore 54 mm, maximum speed 3000 rpm Hodex H R Uljpfx Ah Uog Capacity 750x360 mm 200 mm on the carriage Multifix turret type B

Condition: ready for operation (used), Year of construction: 1984, turning diameter over cross slide: 700 mm, spindle bore: 150 mm, turning length: 3,000 mm, turning diameter: 1,000 mm, capacity 3000x1000 mm, spindle bore 150 mm, steady rests, 4-jaw chuck Hedpfxex Itpbs Ah Usg

Condition: ready for operation (used), Year of construction: 2009, turning diameter over cross slide: 925 mm, turning length: 2,800 mm, turning diameter: 1,200 mm, spindle bore: 132 mm, spindle speed (max.): 2,000 rpm, CNC Siemens 840D Hedjwzyn Rjpfx Ah Ujg 48-tool changer, Capto C8 tools chip conveyor Forkardt 400MM chuck, 2 hydraulic steady rests SMW Autoblok capacity 2800x1250MM, spindle bore 132MM weight 23,500 kg

Condition: ready for operation (used), Year of construction: 2004, spindle bore: 41 mm, turning diameter: 330 mm, center width: 750 mm, Siemens control Hedpfexu Igxjx Ah Uog capacity 750X330MM spindle bore 41MM maximum spindle speed 4000 rpm Multifix turret set of Multifix collets and jaws

Condition: ready for operation (used), Year of construction: 1990, Mazatrol T2 diameter capacity: 440 mm Hodpoxyh Erefx Ah Ueg spindle speeds: 4500 rpm spindle bore: 62 mm

Condition: ready for operation (used), Year of construction: 2001, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 80 mm, spindle speed (max.): 3,200 rpm, overall weight: 6,400 kg, Fanuc OT 12-position turret Capacity 1000 x 400 mm Hjdpfxox Hhl Uj Ah Uog Spindle bore 80 mm Chip conveyor

Condition: not inspected (used), Year of construction: 2003, turning length: 380 mm, turning diameter: 284 mm, spindle speed (max.): 5,000 rpm, overall weight: 2,300 kg, Siemens maximum spindle speed: 5,000 rpm VDI turret with 12 stations Hsdpfx Asx Rbwxjh Uog

Condition: ready for operation (used), Year of construction: 1986, CNC NUM 1050 Hedswz Rgwepfx Ah Ueg Table 1500MM Maximum diameter passage 1750MM Passage height 750MM Maximum spindle speed 250 RPM Chip conveyor