Used Veneer Saw for sale (6,135)

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Gujdpfozlqbaox Ad Rji Maximum cutting length: 3050 mm. Equipped with a rear finger stop.

Condition: used, functionality: fully functional, cutting length (max.): 3,015 mm, saw blade diameter: 180 mm, USED VENEER SAW FOR SALE IN USED CONDITION! Gusdpfx Ajzlhmaed Rei

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 19020216, A circular trimming saw and a router for veneer bundles, characterized by a robust, electrically welded construction, high flexural and torsional strength, smaller overall dimensions due to the placement of the feed unit motors in the lower frame, and safety controls. An automatic version with motorized feed is available. -Circular saw, 2.2 kW (3 HP), pneumatic cut height adjustment, mechanical axis adjustment (0 – 3 mm) -Pre-cutting unit with a circular saw blade with height and axial adjustment -Routing unit, 1.1 kW, including an angled router bit (a straight router bit can be purchased separately) -Rear table with a movable stop on ball-bearing rails and pneumatic clamping -Electronic display showing the distance between the stop and the cutting line -Front table, movable for machines with a circular saw and a routing unit -TEX “Power L” touch control panel with programming capabilities -Double hardened and ground rails with linear ball bearings for precise linear movement of all carriages -Control panel with switches for main operating modes -Pressure beam with two pneumatic cylinders and a torsion bar -Cable chain with cable protection -Double-tube inlet for connecting to a dust extraction system -Filter pressure regulator with a lubricator on the compressed air supply line -Optical safety sensors (safety level 4) -CE safety standard -Year of manufacture 2018, put into operation in 2019 Technical data: Cutting length: 3100 mm Circular saw blade diameter: 180 mm Cutting height: 45 mm Feed speed: 0 - 20 m/min Saw motor power: 2.2 kW Gsdpfx Adsz Akfts Rsui Router motor power: 1.1 kW Voltage: 380 V

Condition: good (used), Year of construction: 1980, Cutting length 3100 mm Gujdpfsyku U Njx Ad Rei Cutting height 45 mm Motor output 1,8 kW machine weight ab. 500 kg

Condition: excellent (used), Working width: 300 cm Guodpezvn Dgjfx Ad Rji Cutting height: 4 cm Pneumatic clamp 1.8 kW motor

Condition: good (used), Year of construction: 1997, cutting length (max.): 3,100 mm, Veneer saw with saw blade and disc instead of a planing unit. It first saws, and then instead of planing, it mills with a disc (the milling cutters are mounted on the side of a disc). Godjzcc I Uspfx Ad Rjui Maximum cutting length: 3100 mm. Equipped with a rear support and finger stop.

Condition: used, Year of construction: 1999, Used Machine Year of Manufacture: 1999 Gedpfx Adjzlbtyj Reui Features and Technical Specifications: - For cutting all types of veneer - Seamless and tear-free - Cutting length: 3020 mm - Opening height: 60 mm - Cutting height: 45 mm - Motor: 1.8 kW - Saw blade speed: 8700 rpm - Saw blade diameter: 180 x 16 mm - Includes a planing unit that can be coupled with or decoupled from the sawing unit - Horizontally and vertically adjustable - Joining blade head 85 x 50 mm, with 4 reversible blades - Front support table is adjustable (ball bushing guide) - With front support table and dust duct - Sliding stop from the front via a position indicator - Veneer clamping via pressure beams using two external pneumatic cylinders - Rear support table with recessed measuring tapes and stop rail - Dimensions: 4780 x 1560 x 1290 mm - Weight: 520 kg

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Guedpfxoq Rb Iro Ad Rsi cutting length 3100 mm with rear fence

Condition: ready for operation (used), Year of construction: 1980, Mayer FS 3 Veneer saw Guedeyh It Repfx Ad Rsi Cutting length: 4000 mm Front and rear support tables Extraction duct

Condition: used, Year of construction: 1982, Second-hand machine Condition: good Features and technical specifications: Cutting length (mm): 3,100 Cutting height (mm): 45 Saw blade diameter (mm): 180 Godpfx Adszk Nvtj Rjui Depth to stop (mm): 500 Main motor: 1.8 kW Pneumatic clamp Rear stop Weight approx. kg: 400 Location: Flörsheim Availability: at short notice

Condition: used, Year of construction: 1985, from schoolused, great condition, little usedMake MayerType FSKYear of construction 1985Machine no. 7936GS testedEngine 1.8kWCutting length 3000 mmSaw blade diameter approx. 180 mmpneumatic tensionrear support tableWeight about 800 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Guedpfx Adsvwf Agj Rji

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, For sale is a professional, heavy-duty band resaw (slitting saw) from the renowned Italian manufacturer CENTAURO S.p.A., model SUPERCUT 80. The machine was manufactured in 2014 and comes from a line of technologically advanced saws designed for extremely precise cutting of wood into thin strips and veneers. Thanks to its robust construction and high frame rigidity, it guarantees perfect cutting geometry while maintaining high performance. Full technical specifications (from the nameplate): Manufacturer: CENTAURO S.p.A. (Italy) Model: SUPERCUT 80 Year of manufacture: 2014 Main motor power: 15 kW (approx. 20 HP) – ensures stable operation even with hard exotic wood species and oak. Wheel speed: 680 rpm Gsdpfx Adjzti T Rj Reui Diameter of cast iron wheels: 800 mm Certificate: CE (full documentation and compliance with safety standards)

Condition: used, Used machine Godpfx Ajzyyzxod Roui Equipment and technical data:

Condition: used, Year of construction: 1992, Cutting length: 3100 mm Workpiece clamping: pneumatic Guedpeyl Tiujfx Ad Rei

Condition: excellent (used), Working length 300 cm, pneumatic clamp, motor 1.65 kW Guedpfoygxgbsx Ad Rsi

Condition: excellent (used), Veneer saw with automatic feed Pendant control panel with all the operating elements and displays required for machine control Feed speed adjustable Solid and torsion-resistant machine frame Double profile linear guide system for the saw and rabbeting unit Solid pneumatic pressure beam with rack and pinion compensation Saw and rabbeting unit raises and lowers pneumatically Cutting and rabbeting height continuously adjustable Rabbeting unit with chip extraction device Front support table, pneumatically adjustable (rabbeting position) Rear support table with width stop, stop depth 15 - 600 mm Width stop with handwheel adjustment and digital dimension display on the control panel Central lubrication point with 14 lubrication points Dust extraction duct Tool holder CE incl. saw blade & router tool Gsdoz U I Rcjpfx Ad Rsui Cutting length 3700 mm Cutting width 600 mm Cutting height max. 45 mm Working height 850 mm Motor power - saw 2.2 kW Motor power - router 1.1 kW Compressed air 5 - 6 bar Extraction capacity 815 m3/h (at 20 m/s) Extraction connection 120 mm Weight approx. 1200 kg Space requirement L x W x H approx. 5200 x 1550 x 1600 mm Note on used machines: • Subject to errors in technical data and prior sale. • Indicated prices are ex works, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen without any warranty claim. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We only answer inquiries if you provide your address + telephone number!)

Condition: used, functionality: fully functional, cutting length (max.): 3,500 mm, cutting height (max.): 40 mm, type of input current: three-phase, saw blade diameter: 180 mm, – very good condition TECHNICAL SPECIFICATIONS: – cutting length: 3500 mm – cutting height: 40 mm – cutting width on the right side: 960 mm – saw motor: 3 kW – milling cutter motor: 1.5 kW – feed motor: 0.75 kW – stepless cutting speed adjustment – blade diameter: 180 mm – cutter diameter: 70 mm – extraction port diameter: 100 mm – upper pressure beam – automatic milling cutter approach – possibility of manual or automatic cutting Gusdpfx Adjw I Efgo Rji – overall dimensions (L/W/H): 530 / 205 / 130 cm – weight: ~ 800 kg

Condition: good (used), Year of construction: 1984, functionality: fully functional, Veneer saw, Scheer FM8-3100 Year of manufacture: 1984 Pneumatic clamping system Cutting length: 3100 mm Maximum cutting height: 45 mm Gujdoyvg D Uepfx Ad Roi Dimensions: 3.8 x 0.7 x 1.15 m Weight: approx. 400 kg

Condition: used, machine/vehicle number: 650597, Motor: 1.65 kW Cutting length: approx. 2450 mm Saw blade diameter: approx. 150 mm Pneumatic blade tensioning Gedpfxsimd D Aj Ad Reui Space requirement: approx. L x W x H mm 3000 x 1000 x 1600 Ex works, from Seevetal location, subject to prior sale, Sold as is, without transport.

Condition: used, Cutting length: 3000 mm Cutting height: adjustable, 0 - 45 mm Saw unit: 1.8 kW Clamping mechanism: operated via handwheel Location: Nattheim Gusdpfx Adoy Hrzaj Rsi

Condition: used, used, good conditionmanufactured by Scheertype FM 8-3100Masch.-No. 83077motor 1,85 kWcut length 3100 mmsaw blade diameter ca. 160 mmpneumatic clampingrear extented tableself-exhaustrequired space ca. l x w x h mm4000 x 1000 x 1300weight ca. 450 kglocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Guedpfx Adjvwftxe Roi

Condition: good (used), Year of construction: 1979, Veneer Saw FSK Year of manufacture: 1979 Pneumatic 1.8 kW, 380 Volt Cutting length: 3000 mm Cutting height: 40 mm Saw blade: 180 mm Depth to stop: 500 mm Required space: 4000 x 1200 x 1300 mm Weight: approx. 500 kg Due to the age of the used machine, warranty is excluded for commercial customers upon sale. Gjdpfem Dr Urex Ad Roui

Condition: used, cutting length: 3050mm workpeace clamping: Handrad Guodpfx Ajm H Uxyod Rei suction connection: yes

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Guodpfx Adsvvkblo Rei Storage location: Nattheim

Condition: used, Year of construction: 2016, IceTech SAW – Industrial Dry Ice Block Saw with Conveyor – 2016 Check out our other listings. DrDryice Two units available. Price is €6600 per unit. IceTech industrial sawing machine for cutting preformed dry ice blocks and slabs into smaller pieces. The machine features a stainless steel enclosure, an integrated conveyor, and a Beckhoff operator panel. It is equipped with an enclosed cutting section, an emergency stop button, and adjustable levelling feet. This machine is an excellent option for dry ice producers and businesses looking for equipment for a dry ice processing or packaging line. The suitability for the required block format and production layout should be verified. Technical specifications: Gujdpfxo Ahg Ebs Ad Rji • Manufacturer: IceTech, Denmark • Machine designation: SAW • Machine number: 512792 • Serial number: 2016-09-04 • Year of manufacture: 2016 • Machine weight: 330 kg • Electrical supply: 3 × 400 V AC • Frequency: 50/60 Hz • Nameplate current: 16 A • Maximum system pressure: 10 bar • Operator panel: Beckhoff • Integrated conveyor • Stainless steel enclosure ASCO dry ice saw, ASCO AAS, ASCO AAS01, ASCO Active Dry Ice Saw, ASCO Passive Saw, ASCO dry ice block cutter, ASCO dry ice cutting equipment, Tannewitz dry ice saw, Tannewitz dry ice bandsaw, Tannewitz 24 inch dry ice saw, Tannewitz 36 inch dry ice saw, Cold Jet dry ice equipment, ColdJet dry ice processing equipment, Cold Jet IceTech saw, IceTech dry ice block saw, PEHAKA dry ice saw, PEHAKA special purpose bandsaw, Dadaux ice saw, Dadaux bandsaw, Dadaux SX 350 KC, KC Tecnologia ice saw, KC Tecnologia SX 220, KC Tecnologia SX 350 KC, KC Tecnologia SX 400, KC Tecnologia C70, Big Block Cutter C70, BF TECH ice saw, BF Technology ice bandsaw, BF TECH C70, BF TECH ice block cutter, industrial dry ice block saw, dry ice slab cutting machine, dry ice slice cutter, solid CO2 cutting equipment, conveyor saw for dry ice blocks, used dry ice saw for sale, second-hand dry ice cutting machine, stainless steel ice bandsaw, industrial ice block cutting equipment. IceTech SAW, IceTech dry ice saw, IceTech 512792, dry ice block saw, dry ice cutting machine, dry ice block cutter, dry ice slab saw, dry ice slab cutter, dry ice slice cutter, dry ice portioning machine, solid CO2 saw, solid carbon dioxide cutting machine, industrial dry ice saw, conveyor dry ice saw, enclosed dry ice saw, dry ice processing equipment, dry ice production line equipment, dry ice packaging line equipment, dry ice block processing, dry ice slab processing, used dry ice equipment, second-hand dry ice saw, stainless steel dry ice saw, Beckhoff operator panel, dry ice machinery for sale.