Used Venture Distributor for sale (409)

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Dsdpfxezzrute Apmokw Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tool In top condition Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-System milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec Dedpfx Apszu A D Eomokw 1 carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25 mm, HSK and milling cutter set easiest operation with the highest level of comfort thanks to the roller clamping system, no clamping or securing required, mounted on a stable base or on a workbench, 1 hook wrench for HSK63F collet 462E, 1 extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 counter pressure device from above 1 tool for vertical Lamello P-System milling Machine in very good condition including many drills and tools Machine can be inspected and demonstrated at our showroom. Location: in stock, 54634 Bitburg - immediately available -

Condition: used, operating hours: 2,454 h, power: 210 kW (285.52 HP), color: other, total width: 6,600 mm, working width: 66,000 mm, Year of construction: 2017 Number of cylinders: 6 Serial number: 1ZOT560AH-HR110363 Engine hours: 2454H Threshing hours: 1280H Front tire size: 800/70R32, Michelin Rear tire size: 530/80R26, Michelin Transmission: Pro Drive Dedpfxo Adz R He Apmskw Straw chopper Cone distributor 4-wheel drive Engine: John Deere Engine power: 285 kW Number of cylinders: 6 Documents: available First put into service: Number of tedders: 5 Equipped with: - Corn harvesting equipment: 8-row corn header Type: 608C Year of manufacture: 2011 Corn upper and lower screens - Grain equipment Cutting bar Type 622R Year of manufacture: 2009 Working width: 6600 mm Transport trailer for cutting unit Grain sieve Camera system Overall dimensions of combine harvester without attachments: approximately 9000 x 3650 x 4000 mm Remarks: signs of wear Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 6, number of print heads: 6, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning Dkodpfxsyi Ak Aj Apmjw We have an AEOON COMPACT SERIES DTG printer for sale. The machine was purchased and installed in June 2022 and operated until mid-2025. During this period, it was regularly serviced by the distributor. The unit features two independent print stations, significantly facilitating and speeding up operation. A head replacement is required for the AEOON. We are including a PRETREAT priming device with the Aeoon printer FREE of charge! We will assist with packaging and transport.

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. Dkodpfx Apjzvn Thjmew The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve, hydraulic distributor block, hydraulic distributor, block distributor -Hydraulic distributors: Hydraulic distributor block from CNC machining center Santenberg GTC S 2 -Individual components: see photos -Submission/Price: complete -Dimensions: 300/210/H190 mm Total weight: 8.4 kg Dkjdpfjktm D Ajx Apmjw

Condition: used, machine/vehicle number: 008166, X axis working area: 4250 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Dkjdjyy U S Iepfx Apmjw Total number of drilling spindles: 25 Total number of tool changer positions: 14

Condition: used, mileage: 65,000 km, power: 180 kW (244.73 HP), first registration: 12/1993, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro2, total length: 7,900 mm, total width: 2,500 mm, total height: 3,460 mm, loading space width: 2,500 mm, Year of construction: 1993, Equipment: ABS, crane, * Mercedes Benz 1824 flatbed truck with HIAB 125 crane with remote control - Original 65,000 km - * Diesel - Engine displacement: 9,572 cc - 180 kW / 240 hp - Euro 2 - Red emissions sticker - NO ALL-WHEEL DRIVE - * German vehicle - German vehicle registration document - immediately available - from first owner - * Unladen weight: 9,720 kg - Permissible total weight: 18,000 kg - * Sunroof - Rockinger trailer hitch with 40 mm pin - 3 seats - * Includes Langendorf long material trailer from 1988 * Please arrange an appointment for viewing - * Contact person: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors and prior sale. Special equipment: Exhaust emission standard EURO 5 EEV, storage compartment on engine tunnel, front axle load 8.0 t, trailer brake 2-line, audio system: CD radio (Bluetooth), battery 220 Ah, air horn, cab: cab - reinforced shock absorber, cab: movable cab entry, generator 100 A, fuel tank: 300 L aluminum, enhanced cooling, parameterizable special module, Voith retarder, rotating beacon left/right, reversing warning sound (external warning signal), rear window, protective plate under radiator / engine, seats in cab: driver's seat comfort suspension seat incl. horizontal suspension, sun visor, steel rims 9.00x22.5, 12 Volt socket, front bumper in steel design, crossbeam for trailer coupling, front axle angled, additional step for construction vehicles, twin-disc clutch, oil cooler transmission Additional equipment: Exhaust emission standard EURO 5, axle configuration: 4x2, trailer coupling: towing hitch, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior mirror wide-angle and heated, left, outside temperature display, cockpit distributor, sunroof (steel), differential lock rear axle, cab: mounting for rough terrain (6.0 Hz), cab: S (short), suspension: leaf spring / leaf spring, electric window lifts, rear axle H 7, 13 t, bevel gear 300, hydraulic pump (Meiller pump - 6 pistons), body / structure: chassis for tipper (additional AV), body / structure: tipper, air filter: filter for construction site vehicles, heated air dryer, model update from 06/2008, engine 12.0 L - 320 kW V6 diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, disc brake front axle, voltage converter 24V / 12V 8 A, Telligent - gear shifting, drum brake rear axle, underrun protection rear foldable, preparation for CB radio, preparation for telephone / fax, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 18.00 t Dedj Ah Am Sjpfx Apmjkw

Condition: used, functionality: fully functional, Year of construction: 2004, machine/vehicle number: 4roll, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Davi, controller model: digital position readout, number of rollers: 4, roller (bottom) diameter: 155 mm, roller (top) diameter: 165 mm, side roll diameter: 120 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, overall weight: 2,200 kg, total length: 3,400 mm, total width: 1,150 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4roll 2000x6 mm plate bending machine Davi year 2004 used plate roll in working condition, Planetary hydraulic dual pre-pinch Capacity: Plate width 2000 mm plate thickness 6 mm pre-bend 5 mm minimum rolling ID 220 mm rollers length 2050 mm Upper roll D 165 mm Pinch roll D 155 mm Side rolls D 120 mm Power electric motor 3 kw on hydraulic unit Voltage 3ph 400/50 mm Installed configuration Rollers surface hardened high strength Conical plate rolling, cone bending Hydraulic control manual leverage distributors Variable working speed Digital position readout --- Hydraulic driven motorized central rolls Pre-pinch pressure adjustable pre-bend Dkodpfx Aps Ahg Ayomjw Drop-end open unloading fully round shells Calibration system for welded seam re-rolling Safety and emergency stop machine dimension 3400x1150xH 1100 mm -weight 2200kg

Condition: excellent (used), functionality: fully functional, mileage: 131,500 km, first registration: 01/2012, overall weight: 11,990 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, empty load weight: 7,445 kg, tire size: 285/70R19.5, fuel: diesel, wheelbase: 3,800 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, suspension: steel-air, Year of construction: 2012, operating hours: 6,500 h, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, fog lights, hydraulics, low noise, soot filter, In addition, we offer insurance – we will calculate the cheapest premium for any vehicle – CHECK US OUT! We also deliver paid-for cars and trucks to the specified address throughout Europe. More information about our services is available from our sales representatives. Weights and dimensions: GVW: 11990kg Dkedpfj Abvb Iex Apmjw Unladen weight: 7445kg Payload: 4545kg GVW TRAIN: 26990kg On drawbar coupling no. 1: 15000kg Wheelbase: 3800mm External dimensions: Length: 770cm Width: 240cm Height: 310cm Emission standard: EURO 5 Volvo equipment: Cruise control On-board computer Automatic transmission (Allison) Factory VOLVO radio Rear axle lock Engine brake Electric windows Electrically adjustable mirrors Heated side mirrors Heated driver and passenger seats Manual air conditioning Breathalyzer Tachograph Electric sunroof Fabric upholstery Two seats Large cab with the possibility of installing a bunk Engine speed regulator Reversing camera ABS Immobilizer Air suspension REAR Inspection report: The Volvo has been inspected technically and mechanically; the vehicle arrived from Sweden on its wheels without any problems. The truck was purchased from a municipal company that used the vehicle and serviced it internally. The mileage has been verified in the documentation and invoices that are in the vehicle, and additionally verified with the Swedish vehicle registration authority. The entire vehicle is accident-free. It is currently fitted with winter tires of size: 285/70R19.5, with approximately 70% tread remaining. Type of body: WUKO / mobile container washer Washing system: high-pressure Type of vehicle: specialized truck PROFESSIONAL WUKO ELEIKO SYSTEM The vehicle is equipped with an extensive WUKO high-pressure system, integrated with a specialized body for cleaning waste containers. Equipment of the system: High-pressure pump. Water system with a filtration system. System of high-pressure pipes and connections. Hand-held high-pressure washing gun. Extended control panel. Electrical and pneumatic control system. Hydraulic system with distributors. Rear working chamber for container handling. Container lifting mechanism. Built-in technical space with service access. APPLICATION - WUKO / CONTAINER WASHING The vehicle is primarily intended for: Professional washing of bins and waste containers. Cleaning containers in residential buildings. Service for housing cooperatives and associations. Washing containers used by municipal companies. Cleaning containers in industrial plants. Performing mobile high-pressure services within the capabilities of the installed system. KEY ADVANTAGES SWEDISH ELEIKO BODY - a specialized installation designed for municipal applications. WUKO SYSTEM - an extensive high-pressure system with a pump, pipes, and a hand-held washing gun. MOBILE CONTAINER WASHER - the ability to perform services directly at the location of the containers. WIDE MUNICIPAL APPLICATION - a solution for companies involved in waste management and cleanliness maintenance. The stated price is net and applies to exports and businesses. A significant discount is available for individual customers. Please contact us directly by phone to get your best price!

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, power: 19 kW (25.83 HP), travel distance X-axis: 4,175 mm, travel distance Y-axis: 1,730 mm, number of spindles: 20, number of tool stations in tool turret 1: 18, TECHNICAL DETAILS Working area X-axis: 4,175 mm Working area Y-axis: 1,730 mm Number of suction traverses: 8 Tool magazine positions: 18 Spindles Number of spindles for vertical drilling: 17 Number of spindles for horizontal drilling (X-direction): 2 Number of spindles for horizontal drilling (Y-direction): 1 Total number of spindles: 20 Milling unit Number of controlled axes: 4 Djdpeyttf Sofx Apmekw Motor power: 18.5 kW Automatic tool changer Liquid-cooled MACHINE DETAILS Total installed power: 19 kW Control model: PC85 EQUIPMENT CE marking Front safety cover Note: Cones, milling cutters, and aggregates are not included in the scope of delivery. Safety fences are supplied based on availability (left side only). The machine is sold and delivered in its actual and legal condition (‘as seen and approved’), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer is entitled to inspect the goods prior to collection, and assumes responsibility for installation, safety, and use of the machine at the destination. External reference: 6906

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Dksdpfszzz N Hsx Apmew Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO Dodpfx Apjzvcknsmskw • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: like new (used), Year of construction: 2023, GENERAL DESCRIPTION: Advanced tooling with a dense and symmetrical structure of the clamping elements. Designed for precise positioning and rigid clamping of geometrically complex components (e.g., car body panels) during automated welding or spot welding processes. The design features a high degree of repeatability of the base points and is fully adaptable for mounting on a welding rotator. COMPONENTS: 1. DESTACO brand pneumatic (knee-type) clamps – 30 pieces. Heavy-duty clamping elements responsible for the mechanical locking of the part. 2. FESTO brand compact pneumatic cylinders – 14 pieces. Used for extending the positioning pins or auxiliary locks. 3. Clamp position sensors (inductive/magnetic) – approx. 30 pieces. Monitor the open and closed states of the clamping elements. 4. Pneumatic installation in thermal shields (Pyrojacket type) – a complete system of manifolds with flexible hoses in thick, red, fire-resistant braids, protecting against welding spatter. Dkedpfoz Ng Nyex Apmsw 5. Valve manifolds / pneumatic distributor blocks – 2 pieces. Control the operating sequences of the individual clamps. 6. Positioning blocks, reference bases (NC blocks) and pins. Precisely milled support points with engraved technological coordinates. 7. Main structural frame – 1 piece. Rigid, stress-relieved welded structure made of closed profiles, equipped with transport lugs and mounting plates for the rotator disc.

Condition: used, functionality: limited functionality, machine/vehicle number: NM0KKXTP6KNA91285, mileage: 69,672 km, power: 243 kW (330.39 HP), fuel type: diesel, overall weight: 18,000 kg, tire size: 315/80 R22.5, axle configuration: 4x2, wheelbase: 4,750 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, emission class: euro6, suspension: steel-air, number of seats: 3, permissible axle load (axle 1): 8,000 kg, Year of construction: 2023, operating hours: 2,081 h, Equipment: ABS, EBS, cruise control, electronic stability program (ESP), power assisted steering, tail-lift, truck registration, FORD TRUCKS 1833 DC 4x2 – BOX TRUCK WITH TAIL LIFT – EXPORT PRICE – SOLD AS IS Ford Trucks 1833 (Road Series) 4x2, manufactured in 2023, with only 69,672 km and 2,081 operating hours. Sold as new and maintained by Herman Noyens Trucks, the official Ford Trucks distributor for Belgium. ENGINE / DRIVE TRAIN - Ford Ecotorq 9.0 l, 6-cylinder, 330 hp (243 kW), Euro 6 - Engine brake, PTO (power take-off) - Front axle 8.0 t, air suspension rear, tires 315/80 R22.5 - Wheelbase 4,750 mm, GVWR 18,000 kg Dkedpfx Aez Ebnhjpmsw CABIN - Day cab (DC), electrically tiltable - Double passenger seat (3 seats), driver's seat with armrest - Manual sunroof, light and rain sensor - Cruise control, ABS/EBS/ESP BODY - Enclosed box body (van) Arslan with side door on the right - Dhollandia tail lift - Side underrun protection - Preparation for trailer (full trailer application) CONDITION OF THE VEHICLE – READ CAREFULLY - Engine and gearbox are in good order. - The vehicle DOES NOT START at the moment: presumably a fuse / electrical problem. Not further investigated. - Damage to the box body: rear and top of the van damaged (see photos), frame of the tail lift damaged, lower side profile and reflective strip damaged. - Vehicle is sold AS IS, without warranty, to be collected in Geel (Belgium). - Price is an export price: EUR 25,000 excl. VAT (EXW Geel). Belgian registration 2-ELZ-411. Chassis number NM0KKXTP6KNA91285. All documents available.

Condition: used, Year of construction: 2008, Control SINUMERIK 840 D Dkodpfx Aoztfwlepmsw rolling power 800 kn diameter max. Werkstück: 250 mm work piece width 80 mm spindle diameter 110 mm 100-700 1/min power capacity 110 kW length 2600 mm width 2600 mm height 2600 mm weight 12,5 t Mandrel diameter: 45–100 mmScope of deliveryCentral lubrication, stepless speed control, proportional measuring system, linear mandrel guide, process monitoring for the mandrel, process data management, rolling equipment, distributor 130–190 mm

Condition: used, Year of construction: 2002, fuel type: diesel, gearing type: other, color: grey-black, TITLE: LINDE H30D duplex REF: 26M01 YEAR: 2002 SERIAL NUMBER: H2X351N00134 HOURS: 8,400 ENGINE: diesel ORIGIN: Italian MINIMUM OVERALL HEIGHT: 2.65 m MAXIMUM LIFT HEIGHT: 4.10 m MAST: duplex CAPACITY: 3,000 kg EQUIPMENT: with forks SIDESHIFTER: yes WHEELS FRONT: 2 REAR: 2 ACCESSORIES: - 4th valve hydraulic distributor REFURBISHED: yes SERVICED: yes TYRES: 80% PRICE: €11,500 + VAT Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for updated prices and conditions. Dsdpfx Aoy H S Iyspmskw For more information: Loris: +39 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sale and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialists in trucks, trailers, and hooklift equipment. Over 50 trucks and 150 hooklift bodies, containers with and without cranes available for immediate delivery. E.&O.E Given the number of listings and the level of detail provided, Aurora recommends verifying the correctness of the listed information with the sales team.

Condition: used, Marine engines, drives and spare parts are offered for sale: Volvo Penta AQ151 engine. AQ151 engine block with crankshaft, pistons, camshaft, carburetor and distributor. Volvo Penta AQ130C engine. Volvo Penta DP-C1 sterndrive. Volvo Penta SX-S sterndrive. Volvo Penta SX-C2 sterndrive. 3 × Volvo Penta 270 sterndrive. 2 × Volvo Penta SX-M sterndrive. OMC Cobra lower unit, alternatively complete sterndrive. MerCruiser sterndrive. Castoldi waterjet drive. Volvo Penta DP-H upper gear unit. Hydraulic power steering pump with cooler and hoses for MerCruiser 3.0/Alpha One Gen. I. Lifting device for Volvo Penta 200-280. Bell housing for Volvo Penta B20/AQ130 with damper and mounting accessories. Upper gear unit for Volvo Penta 80 or 100 series drive. Upper gear unit for Volvo Penta AQ80. Volvo Penta SX-M lower unit. Volvo Penta AQ130 cylinder head with valves. Volvo Penta Engine Control. Flywheel cover for Volvo Penta AQ271. 2 × Volvo Penta trim pump. 2 × universal joint for Volvo Penta SX. Universal joint for Volvo Penta DPH. 3 × Volvo Penta power steering cylinder. Engine bed for Volvo Penta Saildrive. Volvo Penta sliding sleeve. Gasket set for Volvo Penta MD32. Volvo Penta seawater filter. Volvo Penta charge air cooler housing. 2 × installation kit for Volvo Penta D-series engines. Volvo Penta clamp flange. Three-blade bronze folding propeller for Volvo Penta Saildrive SD120. Volvo Penta V-belts and filter material. Various shift cables and shift controls. Boat lights. Various propellers. Instruments and boat fittings. 2 × MerCruiser trim cylinder. Exhaust Y-pipe for MerCruiser 5.7l. Two large boxes of MerCruiser and Volvo Penta V6 4.3l spare parts: cylinder heads, thermostat housings, valve covers, water pump, V-belt pulley, camshafts and wheels, oil pumps, oil coolers, starter motors, gears, manifolds, carburetors, flywheels and trim pump. Inspection possible by arrangement. Dkedpfe Aih Dyox Apmow

Condition: used, functionality: fully functional, mileage: 250,300 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2019, Equipment: air conditioning, crane, NISSAN CABSTAR 35.15 - NT 400 - DRIVING LICENSE B REQUIRED 4x2 - Year 2019 Dksdpfx Aps Ahy Elsmew DIESEL / Euro 6B Mileage: 250,300 km Manual transmission / Engine displacement: 2953 / Power: 96 kW GVW: 35 quintals / DRIVING LICENSE B REQUIRED Payload: 660 kg / Wheelbase: 3,400 mm Accessories: - Air conditioning Equipment: - Fixed cargo box: 4300 x 2100 mm - Wooden floor - BONFIGLIOLI P3500/L 3SI crane * Proportional distributor * Radio

Condition: used, Year of construction: 2023, machine/vehicle number: CA73, Used capsuling machine Robino & Galandrino Minibloc year 2023 – 3000 bphThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph offers a compact and versatile solution for automatically applying capsules to bottles of still and sparkling wine. As a result, this machine suits diverse production environments. Robino & Galandrino designed this monoblock machine to meet different production needs while ensuring high operational efficiency and consistent product quality.Structure and mechanical configurationRobino & Galandrino configured this machine as a Minibloc automatic capsuling monoblock. Specifically, the design includes two operational heads, each performing specific stages of the capsuling process. The infeed screw aligns and guides the bottles precisely into the processing area. In this way, the machine ensures accurate bottle positioning throughout the cycle.Performance based on capsule typeThe used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph delivers specific output levels based on the capsule type. Dsdpfe Ady Evsx Apmokw For instance, it distributes and spins polylaminate capsules on still wine bottles at speeds of up to 1200 bottles per hour. It heat-shrinks PVC capsules onto still wine bottles at up to 3000 bottles per hour. It forms four folds and smooths sparkling wine caps (capsuloni) at speeds of up to 2000 bottles per hour. Moreover, each process maintains excellent consistency and minimal deviation. Therefore, it can satisfy various technical bottling standards across the wine sector.Capsule feeding systemThe machine uses a horizontal capsule magazine with a motorized belt that feeds capsules into the distributor. Notably, it holds around 1200 capsuloni or 1800 standard wine capsules, allowing operators to run longer production cycles without frequent reloads. Consequently, this reduces machine downtime and improves overall line efficiency. Additionally, the feeding system ensures steady capsule flow under different operating speeds. Thus, it contributes to the machine’s stability and reliability.Distributor and synchronization mechanismsThe single-bell distributor performs a 90-degree angular movement to release the capsules. At the same time, a mechanical needle system separates the capsules before distribution to prevent jams and ensure a continuous process. Furthermore, the encoder actively manages the synchronization of all functions and adjusts them in real time. Thanks to this, the system can react dynamically to changes in bottle flow and capsule format. In contrast to older systems, this configuration minimizes manual calibration.Format compatibility and flexibilityThe machine processes bottles in three formats: 0.375 liters, 0.75 liters, and 1.5 liters. Accordingly, operators can use it across different bottling lines and product ranges. In fact, the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph adapts well to the needs of small and medium-sized wineries that require flexible equipment.Operational conclusionsTechnicians appreciate the used capsuling machine Robino & Galandrino Minibloc year 2003 – 3000 bph for its solid mechanics and well-optimized capsuling system. In particular, the dual-head structure and encoder-based adjustments enable precise operation and quick format changes. Moreover, i...

Condition: used, functionality: fully functional, mileage: 240,000 km, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, number of seats: 3, Year of construction: 2019, Equipment: air conditioning, crane, NISSAN CABSTAR 35.15 - NT 400 - DRIVING LICENSE B REQUIRED 4x2 - Year 2019 DIESEL/ Euro 6 Mileage: 240,000 km Djdpfx As Ahy Eaopmskw Manual Transmission/ Engine Displacement: 2953 cc/ Power: 96 kW GVW 35 quintals/ DRIVING LICENSE B REQUIRED Payload: 660 kg/ Wheelbase: 3,400 mm Accessories: - Air conditioning Equipment: - Fixed cargo bed: 4300 x 2100 mm - Floor made of corrugated sheet metal - BONFIGLIOLI P3500/L 3SI Crane * Proportional distributor * Radio

Condition: new, mileage: 500 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, soot filter, MAN 8x4 Hydrodrive with F1150 Fassi Loader Crane Vehicle Description for: TGS 35.520 8x2H-6 BL CH Removable flatbed, Jost fifth wheel coupling, fully clad V2A Trade tonnage: 35 t 2,980 mm main wheelbase 1,795 mm wheelbase between front axles 1,350 mm wheelbase between rear axle and trailing axle Side-mounted exhaust silencer, right side Ground outlet exhaust 2 batteries, 12V, 210 Ah, Super Longlife (AGM), maintenance-free, for increased electrical requirements 390 l fuel tank capacity, left side 35 l AdBlue tank capacity, right side Air compressor, 1 cylinder, 360 cc, with economy system Pneumatically controlled air supply system Air tanks, steel Electronic Braking System (EBS) Anti-lock Braking System (ABS) Full emergency braking assistant Disc brakes on front axle Disc brakes on second front axle Disc brakes on rear axle Disc brakes on trailing axle Emergency brake signal, hazard warning activation LED side marker lights MAN D2676 LFAX diesel engine, 382 kW (520 hp) power, 2,650 Nm torque, Euro 6e Heated fuel filter, suitable for fuels up to cleanliness class 25 Pre-fuel filter with oil/water separator, with water sensor, heated (mixing valve) F1150RA.2.28 L616 Winch + 2-man basket (available on request at extra cost) Endless slewing range All hydraulic cylinders are double-acting Piston rods hard-chromed Double knuckle joint system with PROLINK (over-stretchable knuckle boom up to 12°) Electronic overload shutdown with FX900 FASSI stability control FSC incl. LMB II Emergency stop and visual alarm (90% and 100%) Djdpezmkxhjfx Apmokw Pressure-limiting and load-holding valves XF system (Extra Fast) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS FASSI radio remote control with linear levers and display of pressure values (in bar and %) and 90% + 100% warning on display Danfoss D900 valve block with 4 control valves mounted on the crane column Emergency operation for crane control High-pressure filter supplied plumbed Separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base Hydraulic outriggers, extendable both sides hydraulically, support width 8.84m Outrigger control via radio with proportional valve block IMC system (Integral Machine Control) and ADC (Automatic Dynamic Control) = load-dependent speed control Standard color RAL 3020 traffic red – all cylinders painted black Load hook and mounting brackets (short/500mm) Transport position: folded crosswise to direction of travel Note: Observe board voltage / 12V or 24V, standard 24V FASSI Stability Control FSC-S/II 1 IE742 terminal box Low-profile subframe 180° hydraulically tiltable outrigger legs, both sides Control system for additional function (winch/xhe-dynamic) Control system for 2 additional functions with 2 hose guidance systems / xhe-dynamic Preparation for variable displacement pump (LS) Work light operable via display (1 b/w function) 1 LED work light mounted on knuckle boom LED for 2 outrigger legs, not mounted (crane) LED for 2 outrigger legs, not mounted (additional outrigger supports) GR.15 electrical rotary distributor with 15 slip rings FUNK-V7-RCS V7 RCS radio remote control Fassi radio remote control V7S: Available with 6 or 8 functions with linear levers or joysticks. V7S with 4.3" color display / 24bit - 480 x 272 px, with 8 push buttons Engine start/stop, RPM +/-, 6 x ON/OFF functions, 10m cable and various operating speed controls, incl. second battery, charger, neck and waist belt

Condition: used, This listing is for a SAS Super80 Air Sampler The unit is in full working condition and is ready for immediate release. The SAS Super series (by SAS / Bioscience International, also referenced under other distributors) are impaction‑type microbial air samplers. They draw a known volume of air through a sampling head so that airborne microorganisms are impacted onto an agar contact plate (or Petri dish) for subsequent incubation and colony counting. These instruments are commonly used in cleanrooms, pharmaceutical manufacturing, hospitals, and other controlled environments to assess airborne microbial contamination. Good combination of high airflow + relatively compact unit; allows efficient sampling of large volumes in minimal time. Dksdpfjxv Abajx Apmow Wide usage and long track record (models from this family have been used since the late 1970s/80s) which implies reliability and a mature support ecosystem. Flexible head options (aluminium, stainless steel, resin), choice of plate types (contact plates or standard Petri dishes) in some variants. Strong traceability / data capture features, which are important for regulated environment

Condition: good (used), functionality: fully functional, Year of construction: 2005, operating hours: 18,000 h, SAMPO-ROSENLEW 1066 — forest harvester Year 2005 · 18,000 hours · 4-wheel drive Dkjdpfx Apjpugxnsmew EQUIPMENT • KETO 150 SUPREME harvester head • AGCO Sisu 6-cylinder engine • EPEC 4W30 control system, IQAN display • Measuring equipment • Air conditioning • Vacuum pump • Feed rollers • Wheel chains included • Built in Finland RECENT MAINTENANCE • New injection pump • Reconditioned distributors • Reconditioned working pump (100 h) Machine in good working order, ready to work. Available for inspection and testing on site in Teiu, Hunedoara county, Romania. Price EUR 19,000 ex works Teiu, excluding VAT. Intra-EU supply at 0 % with reverse charge for VAT-registered buyers in the EU.

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture Plus XT - High-precision multi-sensor measuring system for very large workpieces The Baty Venture Plus XT is a sophisticated multi-sensor measuring system specially developed for the inspection of very large and complex workpieces. It offers outstanding precision and flexibility for companies that need to perform demanding quality checks. The robust design, combined with state-of-the-art CNC control and Fusion 3D software, enables automated and repeatable measurements on a large scale. Available models: VP-80100-CNC-XT With a measuring range of 800 mm x 1000 mm x 460 mm, this model offers the perfect solution for large workpieces. The combination of optical and tactile measurements enables precise data acquisition. The model is ideal for applications where medium to large components need to be measured efficiently and accurately. VP-80160-CNC-XT This variant has an extended measuring range of 800 mm x 1600 mm x 460 mm, making it ideal for longer and more complex workpieces. With the integrated 6.5:1 zoom optics and programmable LED lighting, this model offers high flexibility for the precise inspection of workpieces of different sizes. VP-100120-CNC-XT Dkedpfx Apouyh Tkjmjw This model has a measuring range of 1000 mm x 1200 mm x 750 mm and is perfect for very large workpieces. The sturdy aluminum construction and the air bearing axes ensure maximum accuracy, even with heavier workpieces. The fully automatic CNC control and the user-friendly Fusion 3D software make it quick and easy to create inspection programs. VP-100200-CNC-XT With an impressive measuring range of 1000 mm x 2000 mm x 750 mm, this is the largest variant of the Venture Plus XT available. This model is designed for the inspection of extremely large components and offers maximum precision and flexibility. Thanks to the Fusion 3D software, CAD import/export and DXF overlays can also be used with this variant to perform complex measurements. Common functions: Multi-sensor technology: Combination of non-contact optical measurements and tactile measurements for comprehensive data acquisition and maximum precision. CNC control: Enables the creation of fully automated programs for repeatable and time-saving inspections. Fusion 3D software: Supports CAD import/export, DXF overlays and the creation of detailed reports with statistical process control (SPC). Programmable LED illumination: Provides optimal illumination of the workpiece to improve edge detection and measurement accuracy. Zoom optics: 6.5:1 zoom optics, optionally expandable to 12:1, offers maximum flexibility for different measuring requirements. The Baty Venture Plus XT is the ideal solution for companies that require a flexible and precise inspection solution for large to very large workpieces. It offers the necessary precision and efficiency to meet even the most demanding production requirements