Used Venture Distributor for sale (406)

Condition: new, Blade Block / Distributor Block for Siemens SWT-3.6-107 Onshore For sale are four new, unused Siemens Blade Blocks / Distributor Blocks, type ZCH 565227, suitable for Siemens onshore wind turbines in the 2–4 MW power class, including the SWT-3.6-107. The Siemens ZCH 565227 is a central hydraulic module of the pitch system and is responsible for the precise, rapid adjustment of the rotor blade pitch angle. This assembly is a critical safety- and performance-relevant key component, which plays a significant role in yield optimization, load regulation, and operational safety of the wind turbine. Dodpox Tftiefx Apmocp As a hydraulic distributor block, the component is fully integrated into the plant’s control architecture and communicates directly with the main control system. Due to the high mechanical and hydraulic loads, only OEM components of the highest manufacturing and engineering quality are used here. The ZCH 565227 type is used in several current Siemens wind turbine models and is considered a critical component for avoiding unplanned downtime. Technical Data: • Manufacturer: Siemens • Type / Part Number: ZCH 565227 • Designation: Blade Block / Distributor Block • Application: Pitch System • Compatible Models: incl. Siemens SWT-3.6-107 Onshore • Power Range: approx. 2–4 MW Condition & Scope of Delivery: • Condition: New, unused, in original packaging • Availability: 4 units immediately available • Delivery: Europe-wide shipping possible These blade blocks are ideal as strategic spare parts to ensure plant availability or for planned maintenance activities. For technical inquiries, serial number verification, or a prompt transaction, we are at your disposal.

Condition: used, Hydraulic distribution block, hydraulic fitting, hydraulic T-distributor, hydraulic distributo -Hydraulic fitting: T-distributor 2 1/2" -Type: 3000-2 1/2-76.1 A3L -Number: 6x distributor block available -Price per piece -Total dimensions: 235/120/H160 mm -Weight: 17 kg/pc. Dcsdpeirf Eyjfx Apmep

Condition: excellent (used), Index MS42C Dsdpfx Ajfdr R Uspmscp HBF rod guide Oil distributor Flaps with tensioning screws

Condition: good (used), Fan model: HPB-F-040-300T Motor model: SKh90-2S2 Dcodpfjyz Tc Isx Apmop Latest use: Air cushion table External dimensions: Width: 700 mm. Depth: 450 mm. Height: 450 mm. Weight: approx. 20 kg. Condition: good, second-hand

Condition: used, Year of construction: 2023, operating hours: 1,621 h, machine/vehicle number: 6000030, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 575 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D SL, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,800 mm, workpiece height (max.): 875 mm, total height: 6,600 mm, total length: 8,200 mm, total width: 4,800 mm, overall weight: 32,000 kg, spindle speed (min.): 17,500 rpm, spindle speed (max.): 1 rpm, distance table to spindle center: 1,300 mm, distance table center to spindle nose: 425 mm, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, Technical Data Operating time: 1,621 hours Technical Data Supply voltage: 3 × 400 V / 50 Hz (earthed) Supply system: TN-S or TN-C system Total connected load: 105 kVA Nominal load factor RDF: 0.6 Circuit breaker: 160 A gG (5 s) Dimensions Footprint including coolant cleaning system (W × H × D): 8.20 × 4.80 × 6.60 m Weight Operating weight of the machine: 32,000 kg Transport weight: 27,000 kg Control System CNC control: SIEMENS SINUMERIK 840D SL Main Spindle Spindle arrangement: horizontal Design: liquid-cooled motor spindle, AC synchronous technology Spindle lubrication: oil lubrication with minimum quantity lubrication Tool holder: HSK-A63 Tool Clamping System Mechanical clamping force: > 18 kN Setting dimension: 10.5 ± 0.1 mm Performance Data Speed range: 1–17,500 min⁻¹ Acceleration time: 0.7 s Power: 35 kW Nominal power: 26 kW Torque: 80 Nm (40% duty cycle) Nominal torque: 60 Nm Tool Magazine Tool change system: pick-up Tool management: permanently coded Capacity: 40 (1 × 40) tools Maximum total tool load: 200 kg Working Area X-axis: 3000 mm Y-axis: 1800 mm Z-axis: 875 mm Distance between spindle and center of swivel table: 425–1300 mm Tool change position X/Y/Z: 0/0/-310 mm Drive System Dcods Aax U Iopfx Apmop General Design: Three-phase linear motors Position measuring system X-/Y-/Z-axis: direct, absolute X-axis Rapid traverse speed: 120 m/min Maximum acceleration: 10 m/s² Relative acceleration increase (G0): 200 m/s³ Relative acceleration increase (G1): 50 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Y-axis Rapid traverse speed: 120 m/min Maximum acceleration: 16 m/s² Relative acceleration increase (G0): 600 m/s³ Relative acceleration increase (G1): 300 m/s³ Peak force: 10,000 N Nominal force: 5,000 N Z-axis Rapid traverse speed: 120 m/min Maximum acceleration: 20 m/s² Relative acceleration increase (G0): 1000 m/s³ Relative acceleration increase (G1): 500 m/s³ Peak force: 7,000 N Nominal force: 3,500 N Accuracy Positioning accuracy A: ≤ 0.010 mm Repeat accuracy R: ≤ 0.006 mm Tool Change Average chip-to-chip time at n < 17,500 min⁻¹: 4.00 s Workpiece Handling Design: Swivel table driven by an AC servomotor with two opposing clamping surfaces Swivel table: bilateral locking via gear coupling, hydraulically actuated Swivel time 0/180 degrees: 4.0 s Maximum asymmetrical load: 3000 Nm Repeat accuracy at a diameter of 1200 mm: ≤ 0.010 mm Maximum dimensions of clamping device and workpiece: Ø 2200 mm × 3480 mm Maximum weight of clamping device and workpiece per side: 1000 kg Swivel range: 358° Swivel range with parallel loading: -16°–0° and 164°–180° Worm gear division: 2° Maximum speed: 16 min⁻¹ Interface for Control Programs Rotary Distributor Rotary distributor pair for NC rotary table (A/U-axis): unregulated, leak-proof sealed Distribution channels: 16 Maximum hydraulic operating pressure: 250 bar Maximum operating pressure: 8 bar Nominal diameter: 6 Maximum permissible speed at p = 200 bar: 20 min⁻¹ Hydraulic System Operating pressure: 250 bar Flow rate: 9 dm³/min Capacity of the hydraulic tank: 120 dm³ Hysteresis when charging the accumulator: 230–260 bar

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Working area X: 3050 mm Working area Y: 1300 mm 11 kW electro-spindle with vibration sensor, HSK-F63 tool holder C-axis with interface for machining units/modules Interface pre-configured for FLEX-5 unit 13 vertical drilling bits 4 horizontal drilling bits Adjustable saw blade at 0°/90° 12-position disc tool changer EASY-EDGE gluing unit Sawing and cutting unit Combined edge profiling and finishing unit Work table with 6 rows of supports Control system: Power Control with PC85 Dsdjz Du T Uepfx Apmjcp Software package for AV-PC Remote control Chip conveyor belt Vacuum pump Safety mats Protective nets Includes 2 units (edge trimming blade, combined edge trimming and scraping unit), Easy-Edge, and approx. 10-12 suction cups.

Condition: new, Year of construction: 2024, functionality: fully functional, Baty Venture FV - Flexible and precise vision measurement system in three variants The Baty Venture FV is a state-of-the-art vision measuring system developed for the fast and precise inspection of complex workpieces. It provides optical measurements that enable comprehensive detection of the workpiece geometry. This system is particularly suitable for the manufacturing industry, which demands both speed and precision in quality control. The Venture FV is available in three different versions to cover different measurement requirements: Available models: Baty Venture FV1080 With a measuring range of 100 mm x 80 mm, this compact version is ideal for smaller workpieces. It offers fast and precise inspection and is perfect for applications where both optical and tactile measurements are required. Dcjdpfx Ajuyig Sspmep Baty Venture FV2020 This variant has a measuring range of 200 mm x 200 mm and is suitable for medium-sized workpieces. The CNC control in combination with the Fusion 3D software enables fully automatic measurements, which increases efficiency and precision during inspection. Baty Venture FV3020 With a larger measuring range of 300 mm x 200 mm, the FV3020 is the largest variant available. It is particularly suitable for the inspection of complex workpieces where high precision and detailed measurements are required. Common functions: CNC control: all models are CNC controlled, enabling fully automated, repeatable measurement processes that increase throughput on the shop floor. Software: This powerful software supports CAD import/export, DXF overlays and reports that include statistical process control (SPC). Programmable LED lighting: LED lighting provides optimal illumination of the workpiece to enable accurate edge detection and measurement. Advantages: Versatility: with three different variants, the Baty Venture FV offers the perfect solution for workpieces of different sizes and complexity. High measuring speed: Thanks to the CNC control and user-friendly software, measuring times are reduced and efficiency is increased. Precision: The measuring device ensures that both simple and complex workpieces are measured with maximum accuracy. The Baty Venture FV offers the ideal combination of speed, precision and flexibility for companies that need a reliable inspection solution in their production

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Dodpfx Apey Edqqsmjcp Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: reconditioned (used), Year of construction: 2004, Gietz FSA 870 S high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Dodpfsz Hxakox Apmecp Max format 870 x 560 mm : max speed 6,000 sheets / hr Low hours run High speed MABEG suction feeder : 6 heating zones : 2 x electronic servo longitudinal foil feeds : standard delivery

Condition: used, Year of construction: 1995, total length: 22,000 mm, total width: 7,300 mm, total height: 6,700 mm, cutting range round steel at 90°: 120 mm, type of input current: three-phase, overall weight: 30,000 kg, input voltage: 380 V, cutting range square steel at 90°: 120 mm, input current: 63 A, cutting range flat at 90° (X-axis): 120 mm, space requirement height: 7,000 mm, space requirement length: 25,000 mm, space requirement width: 13,000 mm, Price reduced for a quick sale – valid until 8 November 2026 due to the upcoming relocation of the storage system. Complete KASTO automated long-material storage, handling and sawing system for steel bars, tubes, pipes and profiles. The system consists of a KASTO SSZ Vario 140 Duo automatic storage installation with material handling equipment and a KASTO PKS 140 PL circular saw. The installation is designed for efficient storage and automatic supply of long steel materials directly to the cutting process. A key advantage of the system is the very high storage density. The storage system itself, without the saw, measures approximately: 22.0 m × 7.3 m × 6.7 m Floor space required: approx. 160.6 m² At the same time, the system offers a total of: 526 storage locations consisting of: 489 storage shelves with 275 mm depth 37 storage shelves with 565 mm depth Each storage location can accommodate material up to: 6,500 mm length The calculated total horizontal shelf area is approximately: 1,010 m² This means that more than 1,000 m² of usable long-material storage surface is concentrated within only approximately 160 m² of factory floor space. The storage structure consists of 9 double-sided material storage columns. Technical data Manufacturer: KASTO Maschinenbau GmbH & Co. KG Model: SSZ Vario 140 Duo Documentation designation: SSL Vario 140 K-Duo Year of manufacture: 1995 Storage locations: 526 Maximum material length: 6,500 mm Maximum material dimensions: Ø 140 mm or 260 × 120 mm Handling device capacity: 10 kN / approx. 1,000 kg Storage location load ratings: 5 / 10 / 15 / 25 kN Storage dimensions without saw: approx. 22.0 × 7.3 × 6.7 m Storage footprint: approx. 160.6 m² Calculated total shelf area: approx. 1,010 m² Storage configuration: 9 double-sided storage columns Electrical supply: 380 V / 50 Hz / 3-phase Power: 20.0 kW Current: 63 A Weight of bridge handling unit according to nameplate: approx. 4,700 kg Integrated / associated sawing machine: KASTO PKS 140 PL circular saw The system is particularly suitable for steel service centres, steel distributors, metalworking companies, machine builders and manufacturers processing large quantities of bars, tubes and profiles. Automatic material storage and handling can significantly reduce internal transport, forklift and crane movements, material searching and preparation time before cutting. Technical documentation and installation drawings are available. Dodpfx Asz I Tm Ispmocp Location: Poznań, Poland Inspection possible by prior arrangement. Exact technical condition and final scope of supply can be confirmed during inspection.

Condition: good (used), Year of construction: 2022, Brand: Dr. Boy GmbH & Co. KG Type: BOY 60E #55841 Year of manufacture: 2022 Operating hours: On request Screw diameter: 32 mm Maximum injection pressure: 2,142 bar Maximum shot volume: 100.5 cm³ Dodpfoz Tiwhex Apmscp Clamping force: 60 T Maximum distance between tie bars: 360 x 335 mm Minimum mold height: 250 mm Maximum distance between platens: 650 mm Electrical connection: 400 V / 50-60 Hz, 27.2 kVA Heating capacity: 8.4 kW Dimensions: 3,450 x 1,150 x 1,950 mm (L x W x H) Weight: 2,300 kg Options: • Procan ALPHA 4 control system, 15" full-touch display • TEC Package 1: wear-resistant screw and barrel, ceramic heaters • Interface package including OPC-UA, Euromap 77 & 82 • Cooling circuits (3x) on both platens + 8-way water distributor • Oil filling (EconFluid, ISO-32)

Condition: like new (used), Year of construction: 2020, operating hours: 574 h, functionality: fully functional, consisting of: additional vacuum tank for workpiece clamping, complete with vacuum distributor and control logic in automatic cycle 6.6 kW / 9 HP (S6) electric spindle Remote service system Dedpsw H R A Nefx Apmocp Cable remote control for easier positioning and adjustment Robot: Automatic loading and unloading system for glass panels Loading and unloading trolley with locking wheels Mechanical/electronic device on the robot head to center the workpiece on the work surface Pneumatically retractable workpiece stop various double vacuum suction cups various tool sets incl. FILTRAGLASS ECO-BOX CNC grinding coolant cleaning system incl. Stainless steel chamber tank approx. 3,000 l, 3,000 x 1,000 x 1,000 mm, 3 chambers, circulation pump, agitators, filter unit approx. 800 x 600 x 1,780 mm, electrical connection 230 V / 1.5 kW, compressed air connection to be provided on site, 7-8 bar (480 Nl/min) Dismantling/removal must be carried out by the buyer.

Condition: used, mileage: 23,300 km, power: 44 kW (59.82 HP), first registration: 07/1960, fuel type: gasoline, color: red, driver cabin: other, gearing type: mechanical, Year of construction: 1960, Vehicle location: Bovenden, Doka, work lights, rotating beacon, leaf suspension Superstructure: LF 8/TS fire-fighting vehicle incl. Bachert portable pump If you have any questions, please call ! Color: red Synthetic leather: dark red / brown 2nd hand H license plate possible Original German cardboard letter, operating instructions, service certificates, internal certificate and history folder are available. The vehicle was extensively restored for over €50,000.00! 4x4, body Carl Metz GmbH Karlsruhe according to DIN 14530, incl. various accessories such as 1 fire pump, nominal flow rate 800l/min, nominal delivery head 80m, water column speed nominal power 2,800rpm, transmission ratio 1:1, incl. various accessories on hoses, pumps, trailer coupling test mark, M787 license plate OG LC 971H, various hose distributors, jet pipes, water jet pump. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Dodpfxovhh E Se Apmscp - .

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Photos show machine in production before reconditioning Dcjdpoxp Ntvjfx Apmjp

Condition: like new (used), functionality: fully functional, A package of spare parts from Schunk is offered. # Material description 1 CENTERING SLEEVE ZHU 6.0X5.35 [9939384] 2 CENTERING SLEEVE ZHU-10 [ZHU-10] 3 PARALLEL GRIPPER PGN-PLUS-P 80-1-AS-P [318528] 4 GRIPPER PRG 42-30-AS [303663] 5 SWIVEL MOUNT SWV M5-6 [9936171] 6 SWIVEL MOUNT SWV G1/4-6 [9937128] 7 SWIVEL MOUNT SWV G1/4-8 [9936728] 8 SWIVEL MOUNT SWV-G8-6 [9937152] 9 SWIVEL MOUNT SMV-M3-4 [9210505] 10 SENSOR DISTRIBUTOR V2-M8-4P-2XM8-3P [301380] 11 PRESSURE HOLDING VALVE SDV-P 04-E [300120] 12 PRESSURE HOLDING VALVE SDV-P04 0403130 [403130] 13 COMPENSATION UNIT AGE-S-200-XY-P [324603] 14 COMPENSATION UNIT [324604] 15 PARALLEL GRIPPER PHL-W 25-045 [308131] 16 COMPENSATION UNIT AGE-S-XY-160-P [324563] 17 SWIVEL UNIT PNEUMA SRU-PLUS 20-S-90-3 [361300] 18 SWIVEL MODULE RM 21-W [313002] 19 PARALLEL GRIPPER 2-FINGER PGN125-PLUS STROKE [371103] 20 PARALLEL GRIPPER PGN-PLUS 64-1-AS [371092] 21 PARALLEL GRIPPER PGN-PLUS-64-2 AS [371093] 22 PARALLEL GRIPPER MPG PLUS 20 [305491] 23 UNIVERSAL GRIPPER PGN-PLUS 160-2-AS [371454] 24 2-FINGER PARALLEL GRIPPER PGN + 80-1 AS [371401] 25 SENSOR OPR-221-P00, 0321521 [321521] 26 LINEAR DIRECT AXIS LDN-ES-0100-0350-0560 [1360096] 27 ROTARY UNIT ERS170-560-40-B-N-I [ERS170-560-40-B-N-I] 28 ANGLE GRIPPER SWG 50 PNEUM. [305109] 29 RADIAL GRIPPER PRG 52-90-AS [303684] 30 RADIAL GRIPPER PRG 52-30 [303654] Dcedpfxe Af Nlqe Apmop 31 SMALL PARTS GRIPPER MPG 20 AS [340039] 32 PROXIMITY SWITCH IN40-S-M8 [301474] 33 PROXIMITY SWITCH IN 80-S-M12 [301578] 34 SENSOR MMS22-PI1-S-M8-PNP [301160] 35 L. CABLE KA GLT2306-LK-00500-2 5.0M [349515] 36 L. CABLE KV GGT2306-LK-00450-2 4.5M [1308869] 37 CONN. CABLE KV WGN1208-GK-00450-K 4.5M [1308942] 38 CONN. CABLE KV WGN1208-GK-00400-K 4.0M [1308937] 39 CYLINDER SWITCH SWIVEL MODULE RMNS 12-X [313041] 40 PROXIMITY SWITCH MMSK 65-S-PNP [301423] 41 L. CABLE KV GGT2306-LK-00400-2 4.0M [1308867]

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 1100/580/H490 mm -Weight: 13 kg Dcsdpfeffphcsx Apmsp

Condition: good (used), Injector, cyclone, distributor for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings Dsdpfx Apsffphbomocp -Pipe connection: Ø 190 mm -Cone piece: Ø 465 mm -Material: Aluminum -Transport dimensions: 493/465/H495 mm -Weight: 13 kg

Condition: used, operating hours: 2,454 h, power: 210 kW (285.52 HP), color: other, total width: 6,600 mm, working width: 66,000 mm, Year of construction: 2017 Number of cylinders: 6 Serial number: 1ZOT560AH-HR110363 Engine hours: 2454H Threshing hours: 1280H Front tire size: 800/70R32, Michelin Rear tire size: 530/80R26, Michelin Transmission: Pro Drive Straw chopper Cone distributor 4-wheel drive Engine: John Deere Engine power: 285 kW Number of cylinders: 6 Documents: available First put into service: Number of tedders: 5 Equipped with: - Corn harvesting equipment: 8-row corn header Type: 608C Year of manufacture: 2011 Corn upper and lower screens - Grain equipment Cutting bar Type 622R Year of manufacture: 2009 Working width: 6600 mm Transport trailer for cutting unit Grain sieve Camera system Overall dimensions of combine harvester without attachments: approximately 9000 x 3650 x 4000 mm Remarks: signs of wear Online auction of agricultural, earthmoving, and landscaping equipment, including the FENDT 720 Vario, 828 Vario and Favorit 816 Turboshift tractors, NEW HOLLAND T7.260 and T8.420 tractors, MASSEY FERGUSON 9S.425 EX/DYNA-VT tractor, JOHN DEERE 6210R and 7280R tractors, PÖTTINGER Novacat V10000 ED CL rotary mower, JOHN DEERE T560i combine harvester, CLAAS Quadrant 2200RC baler and Rollant 455 RC UNIWRAP baler-wrapper combination, HITACHI Zaxis 160 LC-3 / 180 LC / 300 LC / 350 LC excavators, HITACHI ZW180-6 wheel loader, SCHAEFF / TEREX TW95 tracked excavator, GEHL AL750 wheel loader and RT105EU skid-steer loader, FAUN AFT 50-3 mobile telescopic crane, XCMG XGA16E articulating boom lift, JLG aerial work platforms, RECORD P33T dump truck, KUHN HR6004 rotary harrow, LEMKEN Polaris fertilizer spreader, AMAZONE and KVERNELAND precision seeders, GREENTEC HS252 hedge trimmer, UNI CARRIERS reach trucks, MITSUBISHI electric pallet trucks, AGRINOVA scarifiers, FERRARI garden tractors, STIHL and AMBROGIO robotic mowers, and various other agricultural, construction, gardening, and warehouse machines, etc. The online auction opens Tuesday 20 October and closes Tuesday 17 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 24 November - Thursday 26 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Dcede Adz R Hjpfx Apmjp

Condition: repair required (used), Year of construction: 2022, functionality: limited functionality, machine/vehicle number: 20082500, number of ink cartridges: 6, number of print heads: 6, number of feeding trays: 2, counter reading (color): 85,723, year of last overhaul: 2024, Equipment: raster image processor, type plate available, Good morning We have an AEOON COMPACT SERIES DTG printer for sale. The machine was purchased and installed in June 2022 and operated until mid-2025. During this period, it was regularly serviced by the distributor. The unit features two independent print stations, significantly facilitating and speeding up operation. Dedpfeyi Ak Aex Apmjcp A head replacement is required for the AEOON. We are including a PRETREAT priming device with the Aeoon printer FREE of charge! We will assist with packaging and transport.

Condition: used, Socket distributors, site power distributors, connection cabinets, power distributors, damp room distributors, wall distributors, power distributors Dodehibmkopfx Apmscp -Power distributor: wall distributor power connection box -FI circuit breaker: 25/63 A -Sockets: 1x 63A, 3x 32A, 1x 16A, 2x 220V -Individual components: see photos -Dimensions: 1200/300 / H250 mm -Weight: 16.8 kg

Condition: excellent (used), Year of construction: 2021, GANNOMAT "PROTEC 571" (drilling, grooving, milling) with Clamex and milling tool In top condition Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Prerequisite for horizontal Lamello P-System milling - Prerequisite for milling diameters > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Machining unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X Dcsdpfx Apezu A D Esmsp - 1 grooving unit in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options 1 roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 auxiliary stop 600 mm with integrated rollers for roller tables 1 SET OF TOOLS: Drill set for ProTec 1 carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25 mm, HSK and milling cutter set easiest operation with the highest level of comfort thanks to the roller clamping system, no clamping or securing required, mounted on a stable base or on a workbench, 1 hook wrench for HSK63F collet 462E, 1 extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 counter pressure device from above 1 tool for vertical Lamello P-System milling Machine in very good condition including many drills and tools Machine can be inspected and demonstrated at our showroom. Location: in stock, 54634 Bitburg - immediately available -

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. Dedpezu Nm Hofx Apmecp * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Condition: used, mileage: 65,000 km, power: 180 kW (244.73 HP), first registration: 12/1993, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: orange, gearing type: mechanical, emission class: euro2, total length: 7,900 mm, total width: 2,500 mm, total height: 3,460 mm, loading space width: 2,500 mm, Year of construction: 1993, Equipment: ABS, crane, * Mercedes Benz 1824 flatbed truck with HIAB 125 crane with remote control - Original 65,000 km - * Diesel - Engine displacement: 9,572 cc - 180 kW / 240 hp - Euro 2 - Red emissions sticker - NO ALL-WHEEL DRIVE - * German vehicle - German vehicle registration document - immediately available - from first owner - * Unladen weight: 9,720 kg - Permissible total weight: 18,000 kg - Djdpfxo Ah Am Ss Apmocp * Sunroof - Rockinger trailer hitch with 40 mm pin - 3 seats - * Includes Langendorf long material trailer from 1988 * Please arrange an appointment for viewing - * Contact person: Mr. Andreas Vogel * The information provided on the internet is a non-binding description. * It does not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors and prior sale. Special equipment: Exhaust emission standard EURO 5 EEV, storage compartment on engine tunnel, front axle load 8.0 t, trailer brake 2-line, audio system: CD radio (Bluetooth), battery 220 Ah, air horn, cab: cab - reinforced shock absorber, cab: movable cab entry, generator 100 A, fuel tank: 300 L aluminum, enhanced cooling, parameterizable special module, Voith retarder, rotating beacon left/right, reversing warning sound (external warning signal), rear window, protective plate under radiator / engine, seats in cab: driver's seat comfort suspension seat incl. horizontal suspension, sun visor, steel rims 9.00x22.5, 12 Volt socket, front bumper in steel design, crossbeam for trailer coupling, front axle angled, additional step for construction vehicles, twin-disc clutch, oil cooler transmission Additional equipment: Exhaust emission standard EURO 5, axle configuration: 4x2, trailer coupling: towing hitch, trailer socket 24V / 15-pin, exterior mirrors electrically adjustable and heated, exterior mirror wide-angle and heated, left, outside temperature display, cockpit distributor, sunroof (steel), differential lock rear axle, cab: mounting for rough terrain (6.0 Hz), cab: S (short), suspension: leaf spring / leaf spring, electric window lifts, rear axle H 7, 13 t, bevel gear 300, hydraulic pump (Meiller pump - 6 pistons), body / structure: chassis for tipper (additional AV), body / structure: tipper, air filter: filter for construction site vehicles, heated air dryer, model update from 06/2008, engine 12.0 L - 320 kW V6 diesel (OM 501 LA), engine brake with constant throttle, auxiliary drive MB 2C, wheelbase 3900 mm, disc brake front axle, voltage converter 24V / 12V 8 A, Telligent - gear shifting, drum brake rear axle, underrun protection rear foldable, preparation for CB radio, preparation for telephone / fax, immobilizer, heat protection glazing, central locking incl. key, permissible total weight 18.00 t

Condition: like new (used), Year of construction: 2019, Technical Data: Cross-cutting line with punching unit Strip running direction from the operator's side: right to left Coil changing side in strip running direction: left Operator's side, straightening machine in strip running direction: left Raw material: • cold-rolled strip: S320GD; S350GD; S380GD (strip-galvanized structural steels) • plastic-coated steel strip • aluminum • basically dry surface or commercially oiled • laminated strip • stainless steel Uncoiler: Type: Power Coil M-BS 1600 2 coil loading stations The coil storage track is designed so that a distance of 900 mm remains between 2 coils with an outer diameter of 1600 mm Loading semi-automatic Strip width 200 – 1600 mm Max. coil weight: 16 tons Coil diameter inside uncoiler: 508 - 610 mm Coil diameter outside uncoiler: 900 - 1600 mm Spreading range 470 – 625 mm Machine frame movable on linear guides Spreading hydraulically Strip withdrawal from the coil automatically Coil side guidance automatically, 4-point coil side guidance Press roller, rubberized, centrally positioned on the strip, hydraulically Electrical locking of lifting and traversing movement Control system: Control concept LBF – Control Concept LSV SCHULER Dcedpfozzrutjx Apmop Cross-cutting shear: Type: SCHULER HSU-1600 Shear gap adjustment is carried out by motor The shear is used to cut the strip end at a right angle before processing the first part of a production sequence. Bridging roller bed: Arrangement of the bridging roller bed upstream of the straightening machine Type: VOMA C1600 N Passage, max. strip width 1600 mm Length of bridging roller bed 1050 mm Material running height in the straightening machine 1600 mm Straightening machine: Type: SCHULER SVH 12-53-70-96 / 160-1600 Straightening speed max. 60 m/min. Straightening speed min. 5 m/min. Number of straightening rollers 12 pcs. Diameter of infeed rollers 160 mm Diameter of straightening rollers 3 x 53 mm, 3 x 70 mm, 6 x 96 mm Loop radius 1600 mm Material running height in the straightening machine 1600 mm Strip side guidance automatically Support rollers to prevent roller deflection All-roller drive Looping unit: Threading process in the direction of roller feed via looping bridge, remote-controlled Automatic loop control for continuous straightening process Loop depth below floor approx. 2,500 mm 4-point guidance through 2 sequentially arranged strip side guides To increase feed accuracy, the feed length is recorded by means of a measuring wheel (arranged in front of the feed rollers) Roller feed: Type: SCHULER AC-RP-160-1600 Feed rollers, diameter 160 mm Loop radius 1600 mm Material running height above floor 1200 mm Drive, upper and lower roller, servo drive via a common distributor gear Special coating of the feed rollers Max. acceleration 15 m/s² Brake rollers: Brake rollers generate the strip pull during the rewinding of the strip material from the system onto the coil, in a generator-like manner Adjustment system hydraulically Punching unit with NC tool holder: Type: SCHULER HSU-1600 Design: Double C-frame Punching unit designed as 2 C-frame units, which can be traversed transversely to the strip direction by means of 2 servomotors, for accommodating the punching tools Number of punching tools per side max. 6 pcs. Punching tool, servomotor-driven, 90° rotatable 1 punching cylinder per punching tool Punching force min. 580 kN Max. hole diameter ∅ 90 mm for material thickness 4 mm Manufacturer of punching tools: WILSON TOOL Elevating table: Type: LAWE

Condition: excellent (used), Year of construction: 2024, operating hours: 2 h, functionality: fully functional, overall weight: 3,320 kg, We offer you our 2-part line here: Pallet stack distributor EPAL 1, 800x1200 mm for stacks of pallets placed on top of or inside each other, with a conveyor belt and a machine for rotating EPAL1 pallets, EPAL1 800x1200mm, TYPE OPZL 800. They are fully functional, but we have not used this machine. For sale are the first 3/4 of the sorting line. Part 1: Destacking – the stack is loaded and tilted. The pallets individually move onto the conveyor belt. Part 2: Pallets that are rotated due to nesting are turned over by automatic detection. Dedpozvn Thsfx Apmocp Part 3: The pallets run over a rotary table, where a pallet can be inserted or removed depending on whether it needs repair or to be sorted out. Part 4: The pallets are stacked on top of each other via another conveyor belt. We would prefer to keep the stacker, but we can still come to an agreement if it is absolutely necessary. Please feel free to contact us if you have any questions. The line was ordered new and delivered and tested in July 2025, but unfortunately, it has not been used for current orders and is not planned for use in the near future. Please feel free to contact us if you have any questions. We can gladly send you all the documents.