Used Wagner Cutting Machine for sale (95)

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Blsdsxdtkujpfx Aacep Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Bjdpfxetq I Rqo Aacjlp Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: MB 116434, travel distance X-axis: 1,100 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, controller model: Siemens Sinumerik 828D, workpiece length (max.): 1,300 mm, workpiece width (max.): 650 mm, workpiece height (max.): 600 mm, Wagner WMC 1100 Year of manufacture: 2011 The machine is in good, fully functional condition. Control: SIEMENS Sinumerik 828D IKZ (Internal coolant supply) Spindle speed range: 8000 rpm Tool holder: SK 40 X-axis travel: 1100 mm Bljdpfxsxqzb Ie Aacjp X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24 The machine can be inspected under power. The machine is sold without warranty. The machine was operated in single-shift mode.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: LWAC450-STES-35025, For sale are two refrigeration dryers from L&WGmbH. Both are in good used condition. Both have been used very little. Both are fully functional. PRICE: 250 euros per unit! Blsdpfx Aajxq A Rdscsp

Condition: used, Year of construction: 2003, cutting diameter Ø 520/ 520 x 520 mm saw band length 7250 x 50 mm cutting width 1,6 mm cutting speed 16- 90 m/min power requirement 11 kW dimensions m feed in one step 520 mm multiple feeding length 2080 mm feed speeds infinitely variable 0- 400 mm/min dimensions 4,0 x 2,8 x 2,6 m weight of the machine ca. 3,5 t Double column band saw, full automatic - Sutron BT 15 user terminal Bsdpjuxz Thofx Aacolp - some blades - rest pice appr. 70 mm

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Bledpfx Aasxrwhmocjp Movement X-Axis Movement 1400 Y-Axis Movement 700 Z-Axis Movement 600 This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Various machines from a production line are available. 1) Band saw Wagner WPB 420. 2) Conventional soldering machine Dalex Technoplex. 3) Broaching press. 4) Guillotine shear Omag. 5) Jaw grinding machine Wagner. 6) Two electric induction heaters. 7) Two thread cutting machines. 8) Two crimping machines. An on-site inspection is possible. A package sale is preferred. Blodjxnbr Uepfx Aacjp

Condition: good (used), functionality: fully functional, 2x Powder supply units (Manufacturer: Wagner) 2x Powder control units & spray guns (Manufacturer: Wagner) 1x Curing oven 1x Complete overhead rail system General information about the powder coating plant: 2x Powder supply units (Manufacturer: Wagner): without powder recovery, resulting in short changeover times Curing oven: Oven dimensions (internal): Length: 6500 mm Width: 2400 mm Height: 1400 mm Bljdpfx Aasxhcx Ascsp Maximum component weight: 750 kg Retrofitted to forced-air gas burner (approx. 85kW/h) Rail system: The system was completely renewed in 2013 Load per suspension point: 200 kg Load per suspension traverse: 400 kg Corresponding technical drawing available

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar Bedpfxsw U T Atj Aacelp -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. Bodpfxoxmf Svj Aacolp + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - Dry wall with extraction system and filters - Mechanical conveyor for painted parts with hooks (modular construction, adjustable to the room) - WAGNER painting unit Bjdpfxoxmr Tyj Aacslp The paint shop was used for painting window frames.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Bledpfx Aajxqtgvocjp Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Bjdpfx Ajv Ed Ukjacslp Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Wagner WMC 1100 Year of manufacture: 2012 Bljdpfjxg Ihyox Aacjp Renishaw probe system – With probe, laser, etc. (see picture) Control: SIEMENS Sinumerik 828D ICS (internal coolant supply) Spindle speed range: 8,000 rpm Tool holder: SK 40 X-axis travel: 1,100 mm X-axis feed force: 20,000 mm/min X-axis rapid traverse: 20 m/min Y-axis travel: 650 mm Y-axis feed force: 20,000 mm/min Y-axis rapid traverse: 20 m/min Z-axis travel: 600 mm Z-axis feed force: 15,000 mm/min Z-axis rapid traverse: 24 m/min Turret Number of tool positions: 24

Condition: used, Year of construction: 2007, turning diameter 0500 mm turning length 1500 mm control 802 C turning dia. over face-slide 280 mm spindle bore 82 mm spindle turning speed range 20- 3000 U/min Bjdpfow A Spijx Aacslp feeds - longitudinal 0- 5000 mm/min feeds - cross 0- 5000 min rapid traverse longitudinal 5 m/min rapid traverse cross 5 m/min main drive 7,5 kW travel -z axis 1435 mm travel -x axis 295 mm quill stroke 150 mm bed width 350 mm weight of the machine ca. 3 t dimensions of the machine ca. 3,23 x 1,47 x 1,73 m Cycle control Siemens 802 C

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production Bedpfx Aasw S Hrvscelp X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools

Condition: like new (used), “STEINERT UME 160 180 LS” for Sale Also many other manufacturer like: Bakker Magnetics / Goudsmit / Lenoir / Woko / Eriez Find our complete stock on our website. Overband separator with transformer from 400V. AC to 300V. DC. Extra new spare conveyor belt. Bjdpoggfk Uofx Aacslp Manufacturer: Steinert Type: UME 160 180 LS Power: 56,1 KW Amperage: 173 A Voltage: 300V. DC 100% ED Magnet L X W: (1.800 + 2 x 450=) 2.700 x 1.600mm Conveyor belt: 1.600mm AA. : Ca. 4.500mm

Condition: used, Year of construction: 2024, Please find attached information about our powder coating and wet painting line, which we established last year in the Izmir Free Trade Zone. The facility is designed for bicycle painting. The dimensions are 680 × 680 × 2100 mm (L × W × H). Plant components: 1. 5-stage pretreatment washer, 2-stage plate heat exchanger, and heated stainless steel sheet 316 1.1. Water drying tunnel with reversing function, 135 m 1.2. Control panel 1.3. Medium-duty overhead conveyor 2.1. Label curing oven and conveyor belt, 75 m 2.2. Labeling area with air-conditioned roof and conveyor belt Bjdpfx Aasxa Expecjlp 3.1. Powder coating system, 135 m 3.2. Powder curing oven with 2 reversing functions 3.3. Powder spray booths not included; two Wagner powder spray booths 3.4. Medium-duty overhead conveyor 4.1. Wet painting system 4.2. Powder coating oven 4.3. Wet spray oven 4.4. Exhaust ventilation 4.5. Four wet paint spray booths 4.6. Two air-conditioned mixing rooms 4.7. 290 m conveyor belt 5.1. Label application system, 90 m 5.2. Air-conditioned area in the roof The facility cost €2,800,000.00 as new. This is a fully automatic powder and wet paint line. Individual components can also be purchased. If you are interested, please do not hesitate to contact us.

Condition: used, maximum load weight: 6,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 01/2019, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 400 mm, Year of construction: 2019, Equipment: ABS, * Overloader/Drive-over * Leaf/Leaf * Drum brakes Subject to error and prior sale Viewing by appointment only Bjdpfx Aaeuz Shuscjlp WhatsApp enquiries will not be answered

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Bsdpfov Dwi Eox Aacslp

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F00269, turning diameter over cross slide: 280 mm, spindle bore: 82 mm, turning length: 1,500 mm, turning diameter: 500 mm, spindle speed (max.): 300 rpm, TECHNICAL DETAILS Control: Siemens 802 C Turning diameter: 500 mm Turning length: 1,500 mm Turning diameter over cross slide: 280 mm Spindle bore: 82 mm Spindle speeds: 20–3,000 rpm Feeds – longitudinal: 0–5,000 mm/min Feeds – cross: 0–5,000 mm/min Rapid traverse longitudinal: 5 m/min Rapid traverse cross: 5 m/min Travel – z: 1,435 mm Travel – x: 295 mm Quill stroke: 150 mm Bed width: 350 mm MACHINE DETAILS Machine weight: approx. 3 t Required space: approx. 3.23 x 1.47 x 1.73 m Bedpfx Ajwviucoacolp Main motor: 7.5 kW

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Bledpjwn Tvuefx Aacop Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: refurbished (used), “Wagner 451-130/160-600” for Sale With new transformer from 380 V. AC to 220 V. DC. Manufacturer: Wagner Type: 451-130/160-600 Power: 10,9/7,2 KW. Amperage: 49,3/32,5 A. Voltage: 220V.DC Magnet L x W: 1.600 x 1.300 mm. Bjdpsglvwgofx Aacslp Conveyor belt: 1.400 mm. AA. : 2.530 mm.

Year of construction: 2009, condition: ready for operation (used), Verfahrweg X/Y/Z: 3200mm/1100mm/900mm, max. Werkstückgewicht: 5000kg, Tischdimensionen X/Y/Z: 3250mm/1220mm/1030mm. Spindelleistung: 45kW, Drehzahl: 6000U/min, Werkzeugaufnahme: SK50, Werkzeugdurchmesser: 125mm, Werkzeuglänge: 300mm, max. Werkzeuggewicht: 15kg, NC-Rundtischdimensionen X/Y: 800mm/800mm. Maschinendimensionen X/Y: ca. 7800mm/4700mm, Gewicht: ca. 25000kg, Steuerung: Siemens Sinumerik 810D Shopmill, Betriebsstunden: ca. 32000h, Spindelstunden: ca. 18000h. Inklusive Späneförderer und IKZ. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Blodpfxsv Hrg Dj Aacsp

Condition: ready for operation (used), Year of construction: 1988, An older Wagner bagging system for non-lumpy bulk materials including an automatic scale is available. An on-site inspection is possible. Bodpewn H Ukefx Aacelp