Used Walter Rotary Table for sale (60)

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm Cgjdewmg Sajpfx Aphew maximum diameter of the cut shaft 350mm shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 200 mm -Number of teeth: 12 -Indexable inserts: Carbide -Recording: SK50 -Dimensions: 200/200/H330 mm Cgodpfx Apob E S I Tshew -Weight: 19 kg

Condition: good (used), Cutter head, milling cutter holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Walter, face milling cutter head -Type: WA ER 06 Ø315 mm Codpfx Ajwbn Ewsphjgw -Hole: Ø 60 mm -Dimensions: Ø 335 x 110 mm -Weight: 33.7 kg

Condition: used, machine/vehicle number: 2032, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder Cgjdpfx Apec Nw Svehow -Accessories for tool grinder -Take: SK40 -Tip height: 100 mm -swiveling -Dimensions: 640/260/H290 mm -Weight: 48 kg

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: Walter, dividing head with: three-jaw chuck Codpfowwg Rwjx Aphogw -Type: UTA 160 N -Three-jaw chuck: Röhm Ø 200 mm -Spindle bore: Ø 38 mm -Dimensions total: 625/580/H285 mm -Weight: 122 kg

Condition: used, Rotary table, rotary dividing table, dividing attachment, dividing head -Manufacturer: Walter, rotary table type Rts 400 G -Clamping surface: Ø 400 mm Codelb Iwispfx Aphegw -Center bore: Ø 31 mm -Groove width: 14 mm -Dimensions: 700/510/H260 mm -Weight: 294 kg

Condition: good (used), Cutter head, milling chuck, carbide cutter, indexable insert cutter -Diameter: 160 mm -Number of teeth: 10 Csdob A Rk Ispfx Aphsgw - Carbide indexable inserts: 16 mm -Recording: SK50 -Weight: 14 kg

Condition: good (used), End mill, end mill, milling cutter, indexable inserts Cgjdpfx Aob A R E Uophew -Outer diameter: 50 mm -Teeth: 4 -Weight: 0.5 kg

Condition: like new (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool -Diameter: 63 mm -Fresh height: 49 mm Cjdpfeb A Rcfox Aphogw -Mounting hole: Ø 22 mm -Weight: 0.75 kg

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Walter & Sohn, frequency converter from the BRANDT KM 35 edge banding machine -Type: 501921522 / FU5 / 6 / 132LJD / 60 -Input: 380 V 50 Hz -Output: 220 V 200 Hz Cgedpsgy T Nusfx Aphew -Power: 5 KVA -Protection class: IP54 -Dimensions: 510/325 / H260 mm -Weight: 63 kg

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head Cgedpjhikzljfx Aphew -Manufacturer: Walter, rotary table type RT 250 TG -Clamping surface: Ø 250 mm -Bore center: Ø 48 mm -Groove width: 12 mm -Dimensions: 460/400 / H150 mm -Weight: 44 kg

Condition: used, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: tool grinding machine -Recording: MK5 -Tip height: 145 mm -Part head: swiveling -Dimensions: 250/230/H300 mm Codped Ar U Eofx Aphjgw -Weight: 23 kg

Condition: used, Tool holder, milling holder, milling tool, adapter, clamping unit -Manufacturer: Walter, 41 pieces holder/clamping units SK50 -Various types: see photos, more pictures can be sent Cjdpfx Asgkw I Iephegw -Price/sale: complete -Total dimensions: 700/600/260 mm -Weight: 129 kg

Year of construction: 1963, condition: ready for operation (used), Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible. Codpfey A Smbsx Aphogw

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Dryer, Automatic condensate drain, Tank: 500 litres, Cgodpfx Asy Nlwtephsw Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: good (used), Approx. 60 tool holders of this size. €40/each Sale only within EU member states! No private sales. Any warranty rights are excluded. Cgodpfxoyzduns Aphew We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: used, Approx. 80 tool holders of this size. €30 each Sale only within EU member states! No private sale Any warranty rights are excluded. Codpfx Apeyzdn Ushogw We do not assume any liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with any safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, WALTER TYPE: TANIH320EVO Year of manufacture: 2014 Cedpfx Apjyllx Ijhsgw Faceplate diameter: 500 mm

Year of construction: 1983, condition: excellent (used), *complete with a RÖHM 4-jaw chuck diam. 200 mm Center hight: 160 mm Cgedpfx Apjmrnkzohjw

Condition: ready for operation (used), Year of construction: 1995, A custom-built multi-stage nonwoven line for the production of two-layer or multilayer technical nonwovens made of synthetic or natural fibers with free-flowing materials such as herbs or seeds is available. Material weight range: approx. 100g/m²-1000g/m², needle machine manufacturer: Dilo, max. roll width: 2100mm, max. production speed: 200m/h, needling capacity: approx. 1200strokes/min, main motor: 45kW Siemens, total system dimensions X/Y/Z: approx. 10m/4.5m/4.5m. Process steps: nonwoven web feeding, carrier nonwoven feeding, material feeding (herbs), material dosing, material distribution, top nonwoven laydown, needle station, cutting/to length cutting, winding/rewinding, dust extraction. Documentation available. An on-site inspection is possible. The line is complete including accessories, peripheral equipment and a small sample needle machine. Cgedpfx Apoyt N Dqehjw

Condition: excellent (used), Year of construction: 2013, operating hours: 32,269 h, functionality: fully functional, machine/vehicle number: 2067-2091, WALTER Helitronic Basic 2013 For sale is Walter Helitronic Basic CNC tool and cutter grinding machine. It is in excellent working condition. Machine is under power and can be inspected by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. TECHNICAL CHARACTERISTICS WALTER Helitronic Basic 2013 No. 2067-2091 Working hours 32269 [h] CNC control FANUC 310i Software: Tool Studio Version 3.5 Number of axes 5 Travel path: X= 470mm Y=330mm Z=640mm Spindle rotation speed: 10500 rpm Traversing feeds X, Y and Z axes 15000 [mmmin] A axis 360 [°] C axis +- 200 [°] Max. workpiece lenght peripheral grinding 350 [mm] Max. workpiece lenght end face grinding 280 [mm] Max. grinding diameter 320 [mm] Max. grinding diameter with automated work table 290 [mm] Grinding spindle attachment NCT Grinding spindle diameter 70 [mm] Max. diameter grinding wheel 150 [mm] Max. part weight in part holder headstock 20 [Kg] Coolant pump pressure 7 [bars] Collant pump flow rate 80 [lmin] Lubrication tank capacity 350 [l] Supply voltage 400 [V] Grinding spindle motor power: 7 kW Tool holder: ISO 50 Weight: 4500kg EQUIPMENT INCLUDED x1 Software TOOL STUDIO 3.5 Cgedpfx Aewu Nw Usphjw x1 RENISHAW tool probe x1 DSL AIR TECHNOLOGY AES-SIGMA 20 type oil mist extractor x1 lubrication tank x1 paper band filtration unit x1 GRUNDFOS coolant pump x1 machine parameter backup x3 technical manuals (paper format) x1 technical documentation (CD-ROM format)

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC 5D Year of manufacture: 2000 Carbide saw blade sharpening machine Condition: will be fully refurbished Used 7-axis CNC for face and back grinding - Diameter: 80 to 850 mm - Cross indexing table - SIEMENS MMC103 CNC control - All tooth geometries supported - Numerous options Cgodpfsyuutyjx Aphew Pictures for reference only.

Condition: not inspected (used), Brand: Walter Model: Woodtronic CNC5 with 2-pallet loader Year of manufacture: 2000 Sold as is. Used 8-axis CNC carbide saw blade grinding machine for face and back grinding, with linear loader (2 stations). Cgodpexm T Huefx Aphew Diameter range: 80 to 850 mm - Standard measuring probe for recording and managing grinding parameters - SIEMENS MMC103 CNC control - All tooth geometries 2-pallet loader - Blade diameter up to 600 mm - Magnetic pins Options available on request Contractual photos

Condition: new, Year of construction: 2023, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Cgjdpfoy Sw T Sjx Aphow

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC6F Year of manufacture: 2000 Cgedpfx Aeytn Syephow Sold as-is, machine for production or resharpening of the sides of carbide-tipped saw blades. - Diameter range: 80 to 800 mm - SIEMENS 840DI CNC control - CNC axes Siemens Simodrive 611 - Automatic blade measurement and grinding wheel compensation - Variable spindle speed Images are for reference only.