Used Welding Rotator for sale (12,015)

Condition: used, functionality: unexamined, Semi-automatic transformer core welding machine with ESS stacking units SGE 30 - 84 No. 90101565, SGI 30 ß 84, tooling on the machine EI 84. The stacked sheets are pushed into the machine using the coil, welded and inspected during transport out of the machine. ESS welding equipment with wire feed. Csdpoyqmt Defx Aa Negp

Condition: used, Year of construction: 2020, CNC gantry plasma cutting machine with Skew Rotator bevel unit Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2020 CNC control: Global Control Plus Codsx Dlwmjpfx Aa Negp Working area: 3 x 12 m Track gauge: 4,000 mm 1 oxy-fuel torch ALFA 1 plasma torch with Skew Rotator bevel unit Power source: Hypertherm XPR300 Cutting capacity: 50 mm pierce 80 mm separation cut Beuting extraction table without filter unit Software: Omniwin with Bevel module ä25226

Condition: excellent (used), Year of construction: 2011, pivoting range: 360 °, Welding manipulator SARTORE - PTA 12000 MACH-ID 9321 Make: SARTORE Type: PTA 12000 Year: 2011 Vario matic Rotation / Angle Remote control with Dro Very littles used incl. 2000 mm false chuck  CE-Marked  Table Ø: 2000mm Table load on 50 mm: 12000 Table load on 200 mm:10000 Table load on 400 mm:6600 Table load on 600 mm:4500 Table load on 1000 mm:3500 Rotation table: 360° Lifting chuck: 0 - 135° Table rotation: 0,02 - 0,4U/mm Length: 2980mm Width: 1980mm Height: 1800mm Weight: 6000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Cgsdpfsx H Rhxsx Aa Nsp

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 0704-2151-0001-1, total height: 1,000 mm, total width: 500 mm, total length: 900 mm, overall weight: 300 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 900 x 500 x 1,000 mm Weight: 300 kg External reference: CES - Lot 92 Cgjdpfx Aajym Tcke Njp

Condition: used, Year of construction: 2021, load capacity: 5,500 kg, lifting height: 31,600 mm, total length: 9,700 mm, Rotating forklift Manitou MRT 3255 Cgsdpfjym D N Ujx Aa Njp Drive Diesel Year built 2021 Lifting height (mm) 31,600 Lifting weight (kg) 5,500

Condition: used, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, - Drehbarer Teleskopstapler RTH 6.35 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 34,90 m - Drehung 360 Grad (durchgehend) - Motor: Typ Volvo TAD 583 VE, Stage V - Nennleistung 175 kW (238 PS) bei 2.300 U/min - Max. Drehmoment 975 Nm bei 1.380 U/min - Hubraum 5,13 l - Zylinderzahl 4 in Reihe Cedpfx Ajym D N Ioa Nogp - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina: Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantrieben - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 152 kN - Steigfähigkeit 65% - Wenderadius (mit Gabelzinken) 7.000 mm - Dieselkraftstoff 270 l - AdBlue 40 l - Hydrauliköl 220 l -Motoröl 16 l - Kühlflüssigkeit 40 l - Max. Betriebsdruck 350 bar -Anlagentyp Load sensing - Betriebspumpe Danfoss / Rexroth Verstellpumpe - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss Elektroproportionalventil SIL 2 - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtunf - Steuerung mit CAN-Bus-Technologie

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. Csdpfxeyk Tnzs Aa Nogp You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Welding transformer, high-current transformer, transformer Csdpfx Aajdzp Txe Negp for spot welding machines, projection welding machines, seam welding machines ELREX type 3x ET70.0.G Serial no. Year of manufacture approx. 1990 Comprising three water-cooled transformers with water-cooled rectifier block Technical data: Total rating at 50% duty cycle: 210 kVA (total output from 3 transformers) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 20.1 kA (total from 3 transformers) Primary connection: 380 volts, 50 Hz (three-phase) Details per each transformer: Rating at 50% duty cycle: 70 kVA (per transformer) Secondary voltage: 7 – 10.5 volts (adjustable in 4 steps via terminal connectors on the transformer) Secondary current at 50% duty cycle: 6.7 kA (per transformer) Primary connection: 380 volts, 50 Hz (two-phase) Cooling water requirement per transformer: 4 liters/min. Insulation class: F - Water-cooled transformer - Water-cooled rectifier block mounted on secondary side - DC power output via contact surfaces 50x50mm with M20x1.5mm threaded holes - Temperature sensor on each rectifier element and on each transformer winding - Connection cable: 7-core, cross section 50 mm², length approx. 6 m Overall dimensions (WxHxD): 700 x 710 x 440 mm Total weight: 480 kg Good condition

Condition: new, Year of construction: 2026, functionality: limited functionality, type of input current: three-phase, total height: 1,100 mm, total width: 650 mm, total length: 1,000 mm, overall weight: 230 kg, warranty duration: 24 months, type of cooling: water, product height (max.): 8 mm, Glorystar Laser ALL NEW GW-H Series Handheld Laser Welding Machine 1000-3000W GW-H series is a handheld laser welding machine that can be used for welding various metal sheets and tubes. It features fiber laser with 1000-3000W laser power options, capable of cutting stainless steel, carbon steel, aluminum, brass and other metals up to 8mm thick. The machine includes: In good condition, with all manuals and accessories. Available with single or dual wire feeder options MAXPhotonics / Raycus laser source The welding gun features 4 mode functions: welding, weld seam cleaning, cleaning, cutting Integrated cooling system Touch control panel 24-month warranty 4 working modes:Welding，Weld seam cleaning，Cutting，Cleaning Welding head weight: 1kg Cooling method: Water cooling Codpfjuc S A Eex Aa Nsgp Shielding gas: Nitrogen or Argon Applicable materials: Stainless steel, aluminum, copper, steel, brazing, etc.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Hari, We offer the following services, DIN standard EN 1090 / EX-3 Steel construction Planning and advice on construction as well as production and assembly for steel structures of all kinds in industry, trade and public institutions. A high quality standard for all our activities is our claim. Services: - All types of structural metalwork - Canopies and roofing - Stage constructions - Railings of all kinds - Window grilles, decorative grilles, grilles - Customized steel and stainless steel constructions - Staircase constructions, escape staircases - repairs Welding work Thanks to our comprehensive know-how and extensive technical equipment, we are the right partner for demanding welding work. Our range of services includes - MIG / MAG - TIG - electrode - Autogenous Interior fittings Cgedpfx Asu Szvaoa Nop From consultation, measurement and planning to turnkey handover, we support you reliably and competently. - Conversion / drywall construction - Renovation of old buildings - Free on-site inspection - Painting work - Tiling - doors - Ceiling systems / suspended ceilings - Lighting

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 10 kg, empty load weight: 1,550 kg, borehole diameter: 28 mm, table length: 2,000 mm, table width: 1,200 mm, TECHNICAL DETAILS Cgjdpoygw Nbefx Aa Njp Bore diameter: 28 mm MIG/MAG adjustment range: 20 - 500 A Wire feed speed: 0 - 22 m/min Welding table: 2000 x 1200 mm Number of controlled axes: 6 Workpiece weight: 10 kg MACHINE DETAILS Power capacity: 25 kVA Duty cycle at max. current (40°C): 50 % Current at 100% duty cycle (40°C): 410 A Machine weight: 1,550 kg EQUIPMENT Easy ARC 01.02 FD-B6 Welbee P500L welding robot station Torch RTW5000H Welding robot type FD-B6 Steplessly adjustable control switches

Condition: good (used), Year of construction: 1991, Welding fume filter, Tebaron, TE 1200 – used - : Price ex location: €650 (net) Cgjdsyhxl Rspfx Aa Njp Manufacturer: ISI Industrie-Produkte GmbH Model: TE 1200 Year of manufacture: 1991 380V, 1.1kW, 2.6A, IP54 Condition: good Availability: immediately Location: Waltrop

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,170 mm, - Max. Tragkraft 6000 kg - höhe 21.80 m - Maximale seitliche Reichweite 18.20 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V Cgsdpsymgf Ejfx Aa Njp - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: excellent (used), Year of construction: 2015, Technical specifications: Welding robot with 3 axes Number of axes: 3 Travel range: Longitudinal travel: 4,200 mm Transverse travel: 1,200 mm Vertical travel: 1,000 mm Rotary head with motorised tailstock Centre height: 980 mm Centre distance: 4,500 mm Carrying capacity of 1 rotary device: 3,000 kg Csdeymnqpepfx Aa Nogp Power source: FRONIUS Transpuls Synergic 5000 MIG/MAG Welding torch cleaning station: ABICOR BINZEL The seller assumes no liability for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any guarantee or warranty.

Year of construction: 2025, operating hours: 50 h, condition: like new (used), functionality: fully functional, Schtec WD 720 Double-Headed Corner Welding Machine for PVC Profiles For sale: Schtec WD 720, a precise and reliable double-head welding machine for welding plastic window and door profiles. This machine welds two corners simultaneously in one operation and is suitable for variable angles from 60° to 180°. Thanks to its highly accurate welding tolerance of 0.2 mm, the WD 720 delivers strong, tight, and aesthetically perfect joints – suitable for both white and colored profiles. Key Features: • Simultaneous welding of two corners • Variable welding options between 60° – 180° • Can also be used as a single-head welding machine • 0.2 mm weld seam limitation (for white and colored profiles) • Manual positioning of the movable head • Pneumatic braking system for stable fixation • Individually adjustable heating, temperature, and time parameters • Digital touchscreen control panel • Special heating plates for uniform heat distribution Cjdpfxoykkx De Aa Nsgp • Easy cleaning system for the heating plates • Durable Teflon system for extended service life • Specially designed jig system for more efficient operations Application The Schtec WD 720 is ideal for medium-sized production companies seeking a reliable and precise welding solution. The combination of double-head welding, user-friendly operation, and high weld quality makes this machine suitable for series production of window frames.

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 4 kopslasmachine Schtec, Equipment: 4 in one shovel, Schtec Four-Head Welding and CNC Corner Cleaning Line for uPVC Windows For sale: Professional four-head welding machine with CNC corner cleaning unit from the brand Schtec, suitable for the manufacturing of uPVC windows and doors. This complete line is configured for serial production and is fully adjusted for the Dutch market to work with Deceuninck profile systems. As a result, the machine can be deployed immediately in Dutch window production without any additional modification. Cgsdpfxoykkw To Aa Njp Specifications and Features: - Four-head welding machine – simultaneous welding of all four corners - CNC-controlled corner cleaning unit – clean, precise finishing - High dimensional accuracy and consistent weld quality - Suitable for various window and door sizes - Industrial design for continuous operation - User-friendly control system - Calibrated for Deceuninck profiles (Dutch market) This machine is ideal for companies looking to increase their production capacity or to upgrade and professionalize their current production line. The combination of four-head welding and automatic CNC cleaning delivers high output with minimal post-processing required.

Condition: used, functionality: unexamined, No. 453 Ess TM 30-151MS-1/2 No. 7/0501 Tool EI 84, BI210770 No. 454 Grau ASM 30-60 1990 No. 7.040.90, EI 30-60, BI210790 No. 455 Ess TM 30-122 Tool EI 66 TM 30-122 /S1/2-2/N4, No. 82/0701, Control PLS 510/MS54/82/0702 No. 456 Grau ASM 60-120, 1988, No. 8.020.88 BI210810 No. 457 ESS TMR /IA/S4/30-84 EI 84 Rotary Table No. 83/0137 Control Type PLS 511.03.MS 53, No. 83/0138 Tools EI 48,54,60,66,84,66/84 Cgedpfxeyntu Ao Aa Nep No. 478 Waasner TKSM/H No. 5709 EI 66, cooling unit and transformers missing No. 479 Waasner TKSM/H. No. 5519 EI 66, cooling unit and transformers missing No. 480 Ess TM 30-151 MT-MS-40-4 No. 9/1105 9/1106 1979 MIG / MAG Tools EI 66, EI 78

Condition: good (used), Year of construction: 1997, operating hours: 20,000 h, Kuka KR 30/2 6-Axis Industrial Robot Manufacturer: KUKA Model: KR30-2 Rated total load: 30 kg Reach: 2000 mm Repeatability: ± 0.15 mm Controller: KUKA KR C1 (01-051-810) Kuka Teach Pendant KR C1 Weight: 867 kg Year of manufacture: 1997 Operating hours: Approx. 20,000 Robot Applications Loading and unloading of parts Machining Handling of parts Polishing Arc welding Palletizing Robot movement speed: Axis 1: 140º/s Axis 2: 126º/s Axis 3: 140º/s Axis 4: 260º/s Cgsdpjxgqmlefx Aa Nop Axis 5: 245º/s Axis 6: 322º/s Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, machine/vehicle number: 5554, Year of construction: 2019, operating hours: 3,488 h, load capacity: 5,000 kg, lifting height: 21,000 mm, fuel type: diesel, mast type: telescopic, fork length: 1,200 mm, drive type: Diesel, Rotating telehandler Cgjdpfsxbi Azex Aa Nep Chassis number: 5554 Mast type: Telescopic Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Rear tyre type: Pneumatic Description: Year of manufacture: 11/2019; Model year: 2020

Condition: new, - Capacity horizontal 3000 kg - Capacity vertical 3000 kg - Table size 1400 mm - Electrically tiltable - Wired remote control - Digital display - Documentation Cgedpspa Ugaofx Aa Nop - 400V

Condition: new, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Intermercato GRX 20-5 / incl. RMR 8 Rotator / incl. MS08 Adapter Plate / 5-finger grab / new device / in stock & immediately available Cgjdpjynflmefx Aa Njp Price: €6,390.00 net / €7,604.10 gross - Weight without rotator (kg): 170 - Cross-sectional area (m²): 0.19 - Max. working pressure (bar): 250 - Oil flow (l/min): 30 - Closing force (kN): 11.3 - Excavator class: 5 – 9 t - Grab opening width (mm): 1,234 - Max. capacity (kg): 3,000 We have a very large selection of different grabs in stock, all available for immediate delivery! Simply contact us at ... On request, we will be happy to provide you with a financing offer. We are an official sales and service partner for DMS. We are an official sales and service partner for Holp. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Westtech. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Magni Telehandlers. We are an official sales and service partner for Seppi M. We are an official sales and service partner for JCB Construction Equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Intermercato range! Subject to errors and prior sale! = More information = Intended use: Construction Please contact Marius Herden for further information.

Condition: refurbished (used), functionality: fully functional, ground cable length: 4,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 8,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Parweld XTT202P ACDC – Gas-cooled TIG welding machine 3 Months Warranty Codpfoyi Ubyex Aa Njgp Refurbished, tested, and ready-for-use Suitable for: Daily ACDC welding work under 5mm, hobby, DIY, novice professionals. Not suitable for: Production welding, machine construction, construction above 5mm Specifications: • 200 AMP • 230 Volt • ACDC • Pulse • 2/4 stroke • Gas before current / Gas after current • Start current / End current • Up slope / Down slope • AC Balance / AC Frequency • Pulse Frequency / Bi level • Electrode option Includes: 8 metre PRO26 welding torch, earth cable with clamp, gas hose, and trolley. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), - Capacity 100 kVA - Pneumatic Csdeykcnqspfx Aa Nsgp - Throat depth 570 mm - 380 V

Year of construction: 2016, condition: ready for operation (used), An industrial TIG welding power source Merkle in AC/DC version is available. Insulation class: S, Cooling: AF, Voltage: 400V, Power factor: 0.95. Documentation available. An on-site inspection is possible. Codpsynatrofx Aa Njgp

Condition: excellent (used), For sale: 360° rotating column jib crane with electric trolley-mounted chain hoist. Sturdy industrial construction – ideal for workshops, production halls, warehouses, or manufacturing facilities. The crane allows for lifting and relocating heavy components within the workstation area. Technical details • Capacity: 1000 kg (1T) • Rotation: 360° • Working arm length: 412 cm • Working height: 312 cm • Electric trolley-mounted chain hoist • Power supply: 380 V • Motor power: 0.66 kW • Robust industrial-grade steel construction Codpfx Aasyrg Aus Nsgp Technical condition: used, fully operational, normal signs of use.