CNC machining center

WEMAS VZG 72

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning- and Milling Center (Multi-functional-Machine) | Brand: MAZAK Type: INTEGREX e-650H II | Year of construction: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / operational. Operating hours (as at 10 March 2026): - Total: 91.430 h - Automatic operation: 52.054 hours - Automatic machining: 38.974 hours - Pure machining: 31.316 hours TECHNICAL SPECIFICATIONS: Workspace: - Max. Swing diameter: 920 mm - Max. Swing diameter over tool slide: 920 mm - Max. Turning diameter: 1.100 mm Main spindle: - Max. speed: 1.600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1.000 rpm) - Spindle nose: A2-11" - Spindle bearing inner diameter: 220 mm Blodsyuq Dzspfx Al Isg - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4.500 Nm Tailstock (programmable): - Chuck: MK 6 Milling spindle: - Turret type: Single-spindle with ATC - Tool shank: Steep cone 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0,0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10.000 rpm - Milling spindle motor, AC: 37 kW Travel ranges: - X-axis: 1.025 mm - Y-axis: 650 mm - Z-axis: 6.423 mm - B-axis swivel range: 240° Dimensions: - Spindle centre height: 1.350 mm - Length: 13.267 mm - Width: 3.938 mm - Height: 3.920 mm - Weight: 41 tons Additional information: - Rated power (100% continuous operation): 99,5 kVA Automatic tool changer: - Number of tools: 120-position, SK50 DIN 69871 SPECIFICATIONS / SPECIAL ACCESSORIES: - Numerical control: MAZATROL MATRIX - Documentation - CE marking - Further excellent optional extras ... Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Bodpfxew Hg Nlo Al Islg Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping Bledpfx Aeuhbv Sel Iog - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP60

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, The machine can be used as a fully-fledged universal machining centre! We offer you: Manufacturer: DMG MORI Type: Lasertec 125 3D Hybrid Year of manufacture: 2019 Control: Celos with Siemens 840D sl Operate Technical specifications: Travels: X-axis: 1,335 mm Y-axis: 1,250 mm Z-axis: 900 mm Rotary range: 360° Swivel range: +/- 120° Main spindle: Max. speed - main spindle: 20,000 rpm Drive power - main spindle (100/40%): 35 / 25 kW Max. torque: 130 / 86 Nm Rotary table: Table diameter: C-axis 1,250 x 1,000 mm, integrated in fixed table 1,400 x 1,000 mm Max. table load: 2,000 kg Tool changer: Tool holder: HSK-63A Number of tool stations: 60 positions Max. tool diameter: 80 / 160 mm Max. tool length: 500 mm Tool change time (chip-to-chip): 6.5 sec Feed rates: Bsdpfx Aeyz Si Tol Ielg Rapid traverse: 40 m/min Laser specification: Laser type: Fibre-guided diode laser Power: 2,500 W Fibre diameter: 600 μm, NA 0.22 Wavelength: 1,030 +/- 10 nm Focal length: 200 mm Beam quality: 66 mm mrad Power stability: max +/- 2% (2h) Incl. pilot laser: 600 – 700 nm Operating hours: approx. 4,500 h Spindle hours: approx. 1,910 h Technical features & accessories: - Automated changing of the laser processing head for laser deposition or milling operations - Production package, consisting of: - Scraper-belt chip conveyor - Coolant system, 600 l tank - Paper band filter - High-pressure coolant (IKZ) 40 bar - Chip rinsing in the work area door - Rinse gun, 3 bar - Oil and emulsion mist extraction system - Blown air cooling device through spindle centre - Infrared probe, make Renishaw PP60 optical (OMP60) - Tool measurement in the work area, make Blum Laser - Preparation for 3D quickSET - MPC – Machine Protection Control - 4-color signal lamp - Optical powder feed rate sensor - Automatic work area door - Grating footboard - Laser, consisting of: - Processing optics with focusing lens - Focal length 200 mm - Processing nozzle for 3 mm spot diameter - Water-air chiller for laser and processing head - Second collimation optic for 1.6 mm laser spot diameter - Alignment camera for laser/nozzle adjustment - incl. adaptive process control - incl. extraction system with post-filter stage - Active laser safety window - Extended powder feeder, consisting of: - Twin system (dual-channel material feed) - Material capacity (2x): 5 l, feed rate: 0.5 – 15 g/min - 2x mass flow controllers for consistent material build-up - Automatic switching or mixing via simultaneous operation of both powder containers by NC commands - Powder monitoring and laser camera - Electronic handwheel - DECKEL MAHO MDynamics package - ATC (Application Tuning Cycle) - Safety package for power failure Accessories, depicted tools and clamping devices are included in delivery only if specified in the additional information. Modifications and errors in technical data and details, as well as prior sale, are subject to change!

Condition: excellent (used), Year of construction: 2017, operating hours: 6,473 h, functionality: fully functional, machine/vehicle number: 12780000173, DMG MORI NHX 5000 About the Machine: High-precision and reliable machine. Available immediately. Technical Data: - Control: Siemens 840D - Travel X-, Y-, Z-Axis: 730/730/880 mm - C-Axis Travel: 360° - Rotary Table Clamping Surface: 500x500 mm - Spindle Speed: 20-15,000 rpm - Tool Interface: SK40 - Tool Magazine with 60 positions - Pallet changer with 2 stations - Automation-ready Equipment: - Internal cooling, 70 bar with belt filter system - Work area rinsing - BLUM measuring probe - Rinse gun - Chip conveyor - Signal light - Handheld control device Inspection / test under power on site can be arranged by appointment. We are happy to offer you transport, installation, and commissioning at your location. Everything from a single source: We at Baumgärtner CNC GmbH specialize in: Bedpfxeyhwpwe Al Ielg - Service - Maintenance - Overhauling - Automation for DMG machines and other renowned manufacturers. We accompany you—from the machine purchase, through transport and installation, all the way to commissioning and ongoing maintenance or repair work. You can rely on us.

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Bodpsuyk N Iefx Al Iolg

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Bodpforpn Dvjx Al Ijlg Technical details shown on picture.

Condition: good (used), Year of construction: 2015, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, type: HEC 400D, year 2015, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z = 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 80-fold tool changer, HSK 63 tool holder, spindle speed 15,000 rpm, IKZ 50 Bledpfsuav H Njx Al Iog bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, sound and control cabinets, operating hours 43,698, spindle hours 5,401

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Blsdpfjyrirrex Al Ijg Tool magazine for 30 tools, SK 40

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Bljdjylw Stopfx Al Ijg Technical Specification Taper Size SK 40