Used Wheel Balancing Machine for sale (80,578)

Year of construction: 1989, condition: used, functionality: fully functional, Lot of 13 used machine tools: Lathes, milling machines, radial drill, grinding machine, grinding wheel. TRANSPORT TO BE AGREED UPON DURING PURCHASE OR QUOTATION: - MT180 TRIFASE Lathe - INGERS 175 three-phase Lathe - LEGOR 300 three-phase - ANSELMI 180 three-phase Lathe Pgedpszg E Hyofx Aaxer - Idroming 600 (DRM) - Grinding machine - BERGONZI FS 870 Radial drill - FRESA Prvomajska 1 - FRESA Prvomajska 2 - SERRMAC RAG 25/L three-phase pillar drill - ITALERI three-phase pillar drill - BIMARK MOD. 30 three-phase pillar drill - Fratelli Rosa Milano three-phase pillar drill - Salmoiraghi three-phase grinding wheel Technical details for each machine are shown in the photos. Transport costs to be determined during the quotation process. For any further information, please do not hesitate to contact us. Machines intended for countries outside the EU. ----- Price: 12,900 EUR, VAT excluded + TRANSPORT COSTS TO BE BORNE BY THE PURCHASER -----

Condition: new, Year of construction: 2026, functionality: fully functional, Our most advanced software delivers incredibly sensitive measurements. Only 1.5 seconds to measure. Validation world-wide. Balancing speed - up to 300,000 revolutions per minute. Long lasting mechanical quality. 7/24 online support. 10 pieces of nozzles (28 - 65mm). 25 pieces of flanges. Five-stage oil filtration system. A core oil leak test. Automatic air flow control valve. Prevent turbo from running dry by controlling oil pressure and temperature. Energy-saving and cost-saving adapter system. Adapter changeover time is less than 15 seconds. Pjdpfxsq Tr R Se Aaxogr Free online technical support during the warranty period and after the warranty period. Support for spare parts. Required capacity of the air tank 1/2 m³. Colour printer. (Ops) Dremel for grinding. (Ops)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, MBS BALANCE Horizontal Balancing Machine H-IRB-300 Technical Specifications Max.Rotor Weight 300 kg Min.Rotor Weight 15 kg Max.Rotor Diameter 800 mm Max.Shaft Diameter 130 mm Motor Power 4 kW Bed Length 1500 mm Psdju Eu Thjpfx Aaxsgr

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 100 kg, Vertical Balancing Machine Max.Rotor Weight Pgedpeylqg Dsfx Aaxer 100 kg Min.Rotor Weight 5 kg Min.Diameter 100 mm Max.Diameter 800 mm Engine Power 5.5 kW

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 10,000 kg, total length: 4,000 mm, H-IHB-10 Horizontal Balancing Machine Feature Specification Maximum Rotor Weight 10.000 kg (22046 lb) Minimum Rotor Weight 150 kg (331 lb) Maximum Rotor Diameter 2000 mm (78.7 in) Minimum Shaft Diameter 40 mm (1.57 in) Pgedpfx Aezfbibeaxjr Maximum Shaft Diameter 320 mm (12.6 in) Motor Power 22 kW (29.5 HP) Inverter Capacity (VFD) 22 kW (29.5 HP) Maximum Balancing Speed 0 - 1500 RPM (Adjustable via VFD; higher speeds available upon request) Drive Unit (Standard) End-Drive (Cardan Shaft) Drive Unit (Optional) Belt Drive Bed Length 4000 mm (157.5 in) Unbalance Reduction Ratio (URR) ≥ 95% Loading Per Pedestal 5000 kg (11023 lb) Machine Total Weight 1700 kg (3748 lb) Minimum Achievable Residual Unbalance 1 g.mm/kg Locating Time 30 - 60 seconds Measuring Unit MBS IBalancer v2.8 Control System Windows OS, Intel-based processor

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 3,000 kg, 3 Tone Horizontal Balancing Machine Maximum Rotor Weight ---3000 kg (6613.87 lb) Psdpfor Dd Avox Aaxjgr Minimum. Rotor Weight ---30 kg (66.14 lb) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---20 mm (0.79 in) Maximum Shaft Diameter ---300 mm (11.81 in) Motor power ---11 kW (14.75 HP) Drive Unit (Std.) ---11 kW (14.75 HP) Balancing Speed ---0-3000 Rpm (25 Hz) (up and down adjustable) Drive Unit --- Only Belt or Shaft / Belt + Shaft Bed length ---3000 mm (118.11 in)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 300 kg, total width: 5,900 mm, Cardan Shaft Balancing Machine Maximum Rotor Weight 300 kg Minimum Rotor Weight 10 kg Pgjdpfxjzfbh Ro Aaxjr Maximum Rotor Diameter 600 mm Minimum Shaft Diameter 10 mm Maximum Shaft Diameter 140 mm Motor Power 4 kW Inverter Capacity (VFD) 4 kW Maximum Balancing Speed 0 - 1500 RPM (Adjustable via VFD) Drive Unit Belt Drive Bed Length 5900 mm Unbalance Reduction Ratio 98% Machine Total Weight 1400 kg Measurement Sensitivity 1 g·mm/Kg Locating Time 30 - 60 seconds Measuring Unit MBS IBalancer v2.8 Control System Intel-based processor Windows OS

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 1,000 kg, 1 Tone Horizontal Balancing Machine Pgodpfx Aasq T Ikloxor Maximum Rotor Weight --- 1000 kg (2,204.6 lbs) Minimum Rotor Weight ---10 kg (22.05 lbs) Maximum Rotor Diameter ---1400 mm (55.12 in) Minimum Shaft Diameter ---10 mm (0.39 in) Maximum Shaft Diameter ---240 mm (9.45 in) Motor Power ---7.5 kW (10.06 HP) Drive ---7.5 kW (10.06 HP) Maximum Balancing Speed ---0-1500 RPM (25 Hz) (up and down adjustable) Drive Unit ---Belt Drive Unıt / Cardan Possible Bed Length --- 3000 mm (118.11 in)

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 6 kg, The H-IRB 6T is a high-precision, belt-driven horizontal balancing machine designed for small rotors and shafts. It combines compact efficiency with industrial-grade reliability. Psdpfxszfbh Do Aaxjgr Maximum Rotor Weight 6 kg (13.23 lb) Minimum Rotor Weight 0.1 kg (0.22 lb) Maximum Rotor Diameter 300 mm (11.81 in) Minimum Shaft Diameter 4 mm (0.16 in) Maximum Shaft Diameter 25 mm (0.98 in) Motor Power 0.4 kW (Servo System) Maximum Balancing Speed (Adjustable via potentiometer) 0 – 10,000 RPM Drive Unit Belt Bed Length 400 mm (15.75 in) Machine Weight 500 kg (1102.3 lb) Min. Achievable Residual Unbalance 0.1 g·mm/Kg Cycle Time 8-30 s Software MBS IBalancer v2.8 Language English Processor Intel-based processor OS Windows 11

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 20 kg, Maximum Rotor Weight ---20 kg (44.1 lb) Minimum Rotor Weight ---0.5 kg (1.1 lb) Maximum Rotor Diameter ---450 mm (17.72 in) Minimum Shaft Diameter ---5 mm (0.196 in) Maximum Shaft Diameter ---50 mm (1.968 in) Motor Power ---0.75 kW (1.01 HP) Maximum Balancing Speed --- 0 – 8000 RPM (Adjustable) Pedpeq T Riwefx Aaxegr Drive Unit ---Belt Bed Length ---700 mm (27.6 in)

Condition: used, functionality: fully functional, Used Schenck Balancing Machine H 50 V/B with used CAB 690 H measuring unit. (Can be upgraded to a new CAB 920 unit for an additional (18 000–20 000€) Pedpfxsx Ein Sj Aaxsgr The machine comes with original foundation drawings, documentation and manuals. The machine can be test run in Kerava. Rotor Capacity - Rotor weight range: 20 – 6 000 kg - Maximum symmetrical load on pedestal bearing: 7 500 kg - Maximum symmetrical load on stand bearing: 3 750 kg - The machine can be loaded freely with lower weights when following recommended procedures. - Maximum rotor length between pedestals:1 600 mm (belt drive) - Maximum diameter over machine base: 2 100 mm - Clamped rotor diameter ranges: 25–180 mm, 180–380 mm - Machine bed length: 3 500 mm - Balancing speed n depends on the rotor’s moment and must be selected to avoid overloading the drive. - Maximum permissible G·n² value: 1400 × 10⁶ kg/min² - Applies to a rigid symmetrical rotor mounted on pedestal bearings. - May be exceeded during dynamic tests on flexible rotors and strength tests. - End drive / FU motor: 7,5 kW - 4-speed gearbox: 120–2520 rpm - Belt drive BU 5 / FU: 7,5 kW - Unbalance Umar 0,5 gmm/kg: 0 gmm/plane

Year of construction: 2023, condition: ready for operation (used), WHEEL CUTTING MACHINE FOR PALLET BLOCKS. MACHINE WORKING ON OCCASION. MINIMUM 50X50mm Pjdok Nf S Rspfx Aaxogr MAXIMUM 150X150mm

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: Pedpeu Ngrqefx Aaxjgr -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm Pjdpowi Nh Nefx Aaxsgr grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors *

Condition: used, Year of construction: 1961, workpiece weight 300 kg workpiece length 1200 mm diameter 1300 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Pjdpfx Aaoy Swhvjxsgr We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1995, documentation vorhanden dimensions of the machine ca. 4,10 × 1,20 × 1,40 m Pgedjyhrcrspfx Aaxjr

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Pedpfx Aasx H Aa Tsxogr Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer.

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm Psdpfxjcxxlrj Aaxogr magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: used, Year of construction: 1998, workpiece weight 150 kg workpiece length 2500 mm diameter 160 - mm balancing speed variable 100 - 3000 U/min Pedpfxswcg Els Aaxjgr dia. axle journal 160 - 350 mm voltage 400 V total power requirement 1,5 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 7,50 x 1,30 x 1,60 m Control 0,60 x 0,60 x 1,85 m Software TIRA X9000 Operating System Windows XP Software update 2007 Serial No.: R 32/98 Max display sensivitiy: 0.5 gmm Balancing speed 100 - 3000 RPM

Condition: used, Year of construction: 1990, Technical details: adjustment drive of the grinding de: 0,0025 - 0,05 mm total power requirement: 100 kW adjustment of grinding head slide: 150 mm weight of the machine ca.: 17 t grinding spindle drive: 2 x 37 kW grinding width: 30-150 mm peripheral speed: 34 m/sec workpiece speeds: 60 - 300 mm/Sek. grinding height: 70 mm grinding wheel diameter: 750 mm Pgodpfjvnmnrjx Aaxjr grinding tools: 750 x 75 x 350 mm grinding wheel turning speeds: 870 U/Min. max. workpiece diameter: 250 mm

Condition: used, Year of construction: 1996, Technical details: Pedpfx Aaeizldxjxsgr weight of the machine ca.: 15 t

Condition: used, Electrodynamic balance shaft balancing machine, vertical balancing machine, balancing machine SCHENCK RoTec Type EBLY Manufacturer No. 1FLY, Year of Manufacture 2000 Workpiece/Test Specimen: Balance shafts Number of measuring planes: 2 Number of balancing planes: 2 Angle of balancing components: 145 - 215° Test specimen weight: max. 10 kg Indicated unbalance: 2 gmm/square Lowest value per scale value: 8 gmm/square Balancing spindle speed: 1200 rpm Scale disc with test specimen holder Ø 320 mm Test specimen diameter max. 400 mm Vibration sensor: P01 force sensor Angle position sensor: HBBC incremental encoder CAB 750 microprocessor measuring device RS232 serial interface Workpiece weight: 2.2 kg Podpfx Aowgnu Nsaxegr Workpiece length: 250 mm Workpiece diameter: 70 mm Power supply: 400 V, 50 Hz Rated current: 16 A - SCHENCK M341 balancing indicator Space requirement: L x W x H: 2000 x 1800 x 2000 mm Weight: 620 kg Good condition

Condition: not inspected (used), Year of construction: 1970, Offered here is a balancing machine from the company Trebel. The machine has a solid steel protective hood. For rebuilding, because the control cabinet is missing! Technical data: Manufacturer: Trebel Type: FC4c-xn Pgjdpjhikdwefx Aaxsr Year of manufacture: 1970/74 Normal weight range up to 400kg Max. permissible load per block: 200kg

Condition: good (used), functionality: fully functional, Manufacturer: HOFMANN Type: NG-1 Machine No.: 922472 Max. disc diameter: 320 mm Max. loading weight: 20 kg Pgjdpfxezada To Aaxjr

Condition: new, Year of construction: 2025, Centrifugal wheel system, suspended monorail type 1.15 2T Dimensions: D=1000mm, H=1500mm, payload: 500kg, with 2 centrifugal wheels, 7.5kW each, including filter system and dust collection filter. Pjdsdrr U Sopfx Aaxegr For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on manufacturing at the Grossenlueder location, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with its long-standing and well-known contacts.