Used Whole Log Chipper for sale (2,385)

Condition: used, 619569.0, 35-40 ADVANCED, MS Ultrasonic, ultrasonic generator Godpfst Txbdsx Akhjkd Model: 619569.0 Type: 35-40 ADVANCED Condition: Used

Condition: good (used), Year of construction: 2021, functionality: fully functional, 21x Logopak 410 VM90 industrial label applicators (print & apply) – manufactured in 2021 A total of 21 identical Logopak 410 VM90 print & apply labeling systems are for sale. The units were manufactured in 2021 and put into operation in a modern logistics center starting in 2023. The labeling systems are being sold due to a process change and/or facility modernization. The systems are in working and well-maintained condition and can be inspected by appointment. Technical data: Manufacturer: Logopak Model: 410 VM90 – T01P06 Year of manufacture: 2021 Voltage: 100–240 V AC, 50–60 Hz Current consumption: 8 A Condition: Used Functional CE marking present Scope of supply: Logopak 410 VM90 label applicator Control cabinet with operating panel Machine frame Signal lamp as shown in the pictures Notes: A total of 21 identical units are available. Sale individually or as a complete package is possible. Godpfx Aszltq Rokhokd Inspection possible by arrangement. We will gladly send further photos and technical information upon request.

Year of construction: 2025, operating hours: 40 h, condition: ready for operation (used), functionality: fully functional, Commercial LST 60L Chocolate Melanger – 2026 – Light Commercial Use We are selling our LST 60L commercial chocolate melanger following the closure of our recently launched premium protein bar production facility in London. The machine was purchased new in 2026 specifically for our own food production and has had relatively light commercial use. It is in good working condition and is ready for production. The machine has a custom-made spiral stone grinding system, designed to provide a finer and more consistent grind and improved refining of chocolate and cocoa products. It is suitable for a range of applications, including: Chocolate production Cocoa nib grinding and refining Nut butters Praline Nut-based fillings Chocolate and nut spreads Other confectionery and food applications Videos of the machine in operation are available and can be provided to serious buyers. We are closing the complete production facility, so other food-production machinery is also available, including: Protein bar extruder Automatic flow-wrapping machines Planetary mixers Blixers Chocolate processing equipment Other production and packaging equipment Gedjz Dw Aropfx Akhjkd The equipment was purchased for our own production and is being sold due to the closure of the facility, rather than because of any issue with the machinery.

Year of construction: 2024, condition: used, functionality: fully functional, machine/vehicle number: 0011000019, We are offering this used Hunan Xing Yuan Technology Android touchscreen vending machine, manufactured in 2024, for sale. Manufacturer: Hunan Xing Yuan Technology Gkjdpfx Ajz Dxkqokhod Model: Android Touch Screen Vending Machine Year of manufacture: 2024 Condition: used Machine type: Vending machine If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2007, condition: used, Optical sorter for vegetables, fruit and potato products The Key Technology Optyx Raptor sorts with cameras: product drops past the cameras and pieces that do not meet the settings are blown out with compressed air. That takes discoloured pieces, foreign material and off-spec product out of the stream without people standing at the belt. The rating plate shows it was built in November 2007 in Walla Walla (USA), serial number 07-183087. Supply 400 V, 50 Hz, 40 A. Located in Emmeloord, the Netherlands. Immediately available, price on request. Gedjz Nddyopfx Akhskd More photos and full specifications: / Type: Optical sorter (camera, air ejection) Model code: 6795-604013.1 Power supply: 400 V, 50 Hz, 40 A Construction: Stainless steel

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, input voltage: 240 V, type of input current: AC, Rudolph Technologies / Onto Innovation AXi 940 b Automatic Inline Wafer Inspection Tool Gedpowgm Eajfx Akhskd Model: AXi940b Lamp Operating Hours:

Condition: as good as new (ex-display), Year of construction: 2025, Ultrasonic Cleaning System ULTRA200 Platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. load weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Made entirely of stainless steel Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control system: Fatek, HMI: Weintek Electrical power: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface washing/oil separator for bath maintenance - Ultrasonic immersion transducer with 2-way sound - Power: 2,000 watts eff. / 4,000 watts peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Gkjdpfxsv U A Ize Akhod Demonstration system from the Glogar Technology Center, available immediately

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Godpfx Aendcbyjkhjkd

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type L102 Automatic hot water parts washing machine with basket drive via geared motor, 2 stainless steel washing pumps (manufacturer: Lowara), 2 rotating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - Usable height: 520 mm - Max. load weight: 200 kg - Spray pressure: 2 x 3 bar - Tank volume: 175 liters - Heating: electrically adjustable (ambient temperature - 90°C) System dimensions (L x W x H): 1,300 x 1,250 x 1,990 mm Empty weight: approx. 300 kg Wash cycle timer, freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) 2 suction filters as pump protection Operating hour counter Steam extraction with condensate return Oil skimmer for bath maintenance Gedpfxsc S Tlas Akhokd Insulation of the complete system Parts washing machine is in new condition (test system / pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: as good as new (ex-display), Year of construction: 2026, Parts cleaning machine - spray cleaning system, type L90 Automatically operated hot water parts washing machine with basket drive via geared motor, stainless steel washing pump (manufacturer: Lowara), circulating 3-sided spray system with stainless steel nozzles - Basket diameter: 780 mm - Usable height: 500 mm - Max. load weight: 150 kg Gsdpfx Akod H Slcehskd - Spray pressure: 3 bar (stainless steel pump) - Tank volume: 105 liters - Heating: electrically adjustable (room temperature - 90°C) System dimensions (L x W x H): 1,150 x 1,250 x 1,900 mm Empty weight: approx. 220 kg Wash time timer freely adjustable (minutes and hours) Complete cleaning machine (internal components and external housing) made of stainless steel 1.4301 (AISI 304) Water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabinet) made of stainless steel 1.4301 Mechanical lid locking Bath cover with fine filter (2,000 microns) Suction filter as pump protection Operating hour counter Steam extraction including condensate return Oil skimmer for bath maintenance Parts washing machine is in new condition (test system/pilot plant) OTHER BASKET DIMENSIONS AVAILABLE UPON REQUEST!!!

Condition: new, Year of construction: 2026, Ultrasonic washing machine- ultrasonic cleaning device Gedpfxodz T Nys Akhokd with attached oil separator and insulated hinged cover Floor ultrasound, frequency: 25 kHz Power (eff./peak): 750 / 1,500 watts Heating adjustable up to 80 ° C; Power: 4,000 watts Basket dimensions: LxWxH 570x320x250h mm Pool dimensions: LxWxH 650x400x350h mm Dimensions of the device: approx. 1200x550x750h mm max.loading weight of the basket: 30 kg 1 piece of stainless steel shopping cart is included Device is on rollers

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, input voltage: 230 V, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Multi-sensor coordinate measuring center in top condition with warranty and guarantee extensive services Hexagon Optiv 442 multisensor meter equipped with camera, laser and Renishaw probe system. · Measuring range single sensor: 410x410x200mm · Dimensions: 1232x910x1663mm · Weight: about 940kg · Max. Load weight: glass plate 30kg · Accuracies: U1 = 1.9 + L / 200; U2 = 2.4 + L / 150; U3 = 2.9 + L / 100 (L = measuring length in mm) · Max. Traversing speed per axis: 200mm / s Gkedpfxedyc Uas Akhjd · Incl. Camera with 2-step zoom · Incl. Laser · Incl. LED ring light · Incl. Renishaw 6-fold button changer · Incl. Renishaw TP200 touch probe · Incl. New frame grabber (Eagle) · Incl. 2-monitor operation · Incl. Windows 7 Ultimate evaluation station · On request including transport, commissioning and calibration

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. Gedpfx Akoud N Hdjhjkd We look forward to your inquiry.

Condition: excellent (used), Equipped with charger Brand: Swisslog Model: LTC2 Length: 167 cm Width: 60 cm Godpfjwk Eywex Akhskd Height: 35 cm

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Gedpfx Aeu U Hgiekhskd Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9 Gksdpfxsuggb Dj Akhod  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: new, Year of construction: 2026, total width: 1,250 mm, total length: 1,000 mm, total height: 650 mm, overall weight: 375 kg, input voltage: 220 V, power of feed motor: 1,100 W, secondary voltage: 380 V, number of rollers: 7, Equipment: CE marking, documentation/manual, emergency stop, Ready to Run with "R-Pro RUN"? We have taken the standing seam machine to a whole new level. While being a fully automatic machine equipped with all features, it also stands out for its compact size and light weight. In this way, it does not take up unnecessary space in the workshop and there is no need for large vehicles to transport it to the job sites. Thanks to its light weight, it can be eaasily carried anywhere. Faster, more precise and easier to use... It produces 25 mm seam high standing seam metal from coils or sheets in a single pass. Eave and fascia claddings are also produced quite easily and quickly. Both Modes are on the same machine! Gjdpfx As Abbmijkhjkd Automatic Mode: The lenght of the panel to be produced and quantity are entered into the digital screen. Once the desired dimension is reached, the machine automatically performs the cut using a guillotine shear and continues production. There is no need to wait by the machine. It is sufficient to simply collect 25 mm seam-height metal panels as they emerge from the machine. The machine will stop operating once the specified quantity has been reached. Semi-Automatic Mode: The material inside the machine reaches the desired lenght and stops. Cutting is performed using a motorized guillotine shear by pressing a button. Afterward, the machine continues the production process with the press of a single button. Once the specified quantity is reached, the machine stops operating. It features roll-forming rollers made of high-quality steel with corrosion protection. It is a cost-effective, long-lasting and trouble-free machine that offers a sustainable solution and maintains its quality for many years without requiring additional expenses. A brand that stands ready to provide support at any moment - with an extensive and robust inventiory of spare parts and a team of expert sevice employee - guaranteeing that your operations never come to a halt: Wide spare parts inventiory, rapid service. MAXIMUM MOBILITY AT LOW COST There is no need for large, difficult to carry and costly standing seam roll forming machines, when there is a "R-PRO RUN" standing seam machine. With our portable standing seam machine, high precision standing seam panel production is possible without any length limit. QUALITY and TRUST – REIS STANDING SEAM TECHNOLIGIES Every manufactured “R-PRO RUN” standing seam machine goes through delicate tests Easy maintenance CE Certificate EU Attestation of Compliance Certificate ISO 9001 DIN EN 349 DIN EN 1037 DIN EN ISO 12100-1/2 DIN EN 13849-1 DIN EN ISO 13850 DIN EN ISO 13857 DIN EN 14121-1 DIN EN 60204-1 2 years of warranty "R-PRO RUN" Standart Features - Fully Automatic Guillotine Shear - Dijital Encoder for length and quantity - Ribbing Attachments - Cabled remote controller - Emergency stop button - Forward and backward button - Material width adjusment (250 mm – 700 mm) - Wheels (Locking feature) - Standard standing seam height 25 mm - Weight: 375 kg - You can transport with small cars - You can lift it to the roof easily

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037303, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,564 bar, injection weight: 432 g, mold height (min.): 500 mm, ejector force: 3,300 N, ejector stroke: 175 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 6,100 mm, total width: 1,710 mm, total height: 1,950 mm, overall weight: 8,400 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 520 mm, tool weight: 14,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile machines in stock: The fully electric PX series is the answer to your demands for greater flexibility combined with increasing productivity. Robust mechanics, highly precise and dynamic drive technologies, and intelligent energy management make the PX a reliable, productive, and efficient workhorse in any injection molding operation. An ergonomically optimized working height, maximum clearance under the mold, and excellent accessibility ensure maximum operator convenience. The PX series stands out due to its flexibility throughout its entire service life. TECHNICAL DATA: KM 160 / 750 PX G02 (Order 38621981) CONTROL  MC6 with 21.5" TFT color touchscreen and multi-touch function CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 240  Mold opening (h x v) mm 520 x 470  Platen size (h x v) mm 710 x 660  Mold height min. - max. mm 200 – 500  Opening stroke mm 850  Max. mold opening stroke mm 450  Ejector drive Hydraulic  Ejector stroke mm 175  Ejector force forward/backward kN 33 / 16  Ejector speed forward/backward mm/s 350 / 350  Max. mold weight kg 1400 INJECTION UNIT  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.3  Injection pressure bar 1564  Injection volume cm³ 475  Shot weight at max. stroke for PS g 432  Injection speed mm/s 125  Injection flow rate cm³/s 297  Screw drive / speed 1/min 267  Plasticizing rate (standard screw)4) g/s 75.8  Nozzle clamping force kN 42 ELECTRICAL PARAMETERS  Connected load kW 42  Installed heating power kW 18  Power supply V / Hz 415 / 50 Godpfx Ae Afdatjkhokd WEIGHT AND DIMENSIONS  Net weight with control cabinet t 8.4  Length x width x height m 6.1 x 1.71 x 1.95 ADDITIONAL EQUIPMENT  Increased mold opening  Hydraulic core pull 1+1 - way  Pneumatic core pull 1+1 - way  Air valves 1+1 - way  Pneumatic cascade 4 - way  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available for immediate delivery. Additional options can be offered upon request. We look forward to your inquiry.

Condition: reconditioned (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 200 mm, warranty duration: 6 months, CARETTA MODULA 4020 – 3-AXIS WATERJET – 4,000 × 2,000 MM – REFURBISHED WITH WARRANTY Available without pump or complete with a KMT Streamline SL-V 50 Classic 50 HP pump. The first year of CAD-CAM IGEMS subscription is included in both configurations. B&B Waterjet Abrasive offers a Caretta Technology Modula 4020 3-axis waterjet cutting machine, with a working area of 4,000 × 2,000 mm, self-aligning gantry, and ECS CNC 1802 numerical control. The machine is supplied with refurbished or new components, a new Dialine cutting head with integrated diamond, and a new abrasive metering unit. CONFIGURATIONS AND PRICES • €40,000 + VAT: machine without high-pressure pump, with the first year of IGEMS subscription included. • €65,000 + VAT: machine complete with a KMT Streamline SL-V 50 Classic pump, with the first year of IGEMS subscription included. From the second year onwards, the IGEMS subscription costs €1,500 + VAT per year. For both configurations, transport, installation, commissioning, training, and other ancillary services are excluded and can be quoted separately. TECHNICAL SPECIFICATIONS • Manufacturer: Caretta Technology • Model: Modula 4020 • Technology: abrasive waterjet cutting • Configuration: 3 axes with self-aligning gantry • Working area: 4,000 × 2,000 mm • Controlled Z-axis, 200 mm stroke • Numerical control: ECS CNC 1802 • Cutting head: new Dialine with integrated diamond • Abrasive metering unit: new • Abrasive tank: 200 liters • Motors and drives: Yaskawa • Guides and slides: INA • Rack: Güdel with helical teeth • CAD-CAM software: IGEMS, first year of subscription included SLUDGE SYSTEM INCLUDED IN BOTH CONFIGURATIONS Provision for a sludge disposal system, with a tank, semi-automatic electrical panel, and diaphragm pump included in the supply. PUMP FOR THE €65,000 + VAT CONFIGURATION • Brand: KMT • Model: Streamline SL-V 50 Classic • Power: 50 HP / 37 kW • Maximum pressure: 3,800 bar • Flow rate at 3,800 bar: 3.7 l/min • Topwork refurbished to new condition • Oil and filters replaced The indicated power refers to the pump, not to the total power consumption of the system. Gsde Ad I U Espfx Akhskd WARRANTY, DELIVERY, AND LOCATION Both configurations include: • 6-month / 1,000-hour warranty, according to the offer conditions. • Delivery expected within 8 weeks from receipt of order. Machine can be viewed by appointment at: Via Campolongo, 81E – 35019 Onara di Tombolo (PD), Italy. B&B WATERJET ABRASIVE – OVER 17 YEARS OF EXPERIENCE We support you from the selection of the machine to after-sales service: installation, commissioning, operator training, maintenance, spare parts, and abrasive supply. Services are quoted based on the requirements and the machine's destination. Contact us specifying the desired configuration, the materials to be processed, and the installation location: we will prepare a customized offer.

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in fully functional condition, ideal for bakeries, pizzerias, pastry shops or large gastro operations. Thanks to the design with simultaneous rotation of the bowl and spiral, the dough does not overheat and develops gluten perfectly. Technical parameters: Maximum dough capacity: 80 kg Bathroom volume (bowl): 127 liters Minimum mixing: approx. 6 kg Power supply: 3 x 400 V (three-phase current) Safety: Protective cover with safety microswitch (the machine stops immediately when lifted). Godpfozwm Dhjx Akhokd

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber Godpfx Aeua D Alokhjkd purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Year of construction: 2026, condition: new, Metal separation system – WPS-1000 + 12,000 gauss magnetic separator Metal separation system consisting of a vibrating table, a magnetic drum belt separator, and a WPS-1000 eddy current separator. Designed for the separation of ferrous and non-ferrous metals from bulk materials in recycling processes. OPERATING PRINCIPLE The vibrating table feeds and distributes the material evenly. The magnetic separator captures magnetically susceptible particles. The WPS-1000 eddy current separator then separates non-ferrous metals, such as aluminum and copper, from the remaining material stream. VIBRATING TABLE AND MAGNETIC DRUM BELT SEPARATOR Gedj Afw Ukspfx Akhskd • Vibrating table width: approx. 1,000 mm • Vibrating motor power: 2 × approx. 0.8 kW • Magnetic drum width: approx. 1,100 mm • Magnetic roller diameter: approx. 200 mm • Magnetic flux density: approx. 12,000 gauss • Conveyor belt motor power: approx. 1.1 kW • Reinforced PVC conveyor belt • Structure partially made of stainless steel WPS-1000 EDDY CURRENT SEPARATOR • Magnetic rotor with NdFeB neodymium magnets • Magnetic rotor length: 1,000 mm • Rotor motor power: 7.5 kW • Conveyor belt motor power: 1.5 kW • Variable rotor and conveyor belt speeds • PVC conveyor belt with a sealing side skirt • Enclosed separator structure • Adjustable splitter for separating material fractions • IP55-rated control cabinet with a safety system • Color: RAL 3001 Adjustable rotor speed, conveyor belt speed, and splitter position allow operating settings to be adapted to the processed material. Separation performance depends on material composition, particle size, and feeding conditions.

Condition: new, functionality: fully functional, A new log step feeder will be made to order based on your technical requirements. Gsdpjyfmn Refx Akhekd

Condition: good (used), Year of construction: 2020, Epilog Cameo Zing 24 Co2 Laser with UML 340 extraction Year of acquisition: 2020 (year of manufacture: 2019/2020) Including rotary engraving device and compressor Gjdpfxsyh Rhko Akhekd Laser power: 30 watts Max. working area: 610×305 mm Max. working height: 191 mm Laser safety class: 2 Resolution: 1,000 dpi Frequency: 10–5,000 pulses/inch Interfaces: 10 Base T-LAN, USB No additional software included. #8480

Condition: used, This listing is for the Envair Technology B102 Microbiological Safety Cabinet + Mobile Stand The unit is in full working condition and is ready for immediate use Gkodpoxhfpkofx Akhod Overview: Envair Technology Bio 2 Essential (B102 Series) Certifications & Intended Use Fully compliant with BS EN 12469:2000, ensuring reliable biosafety standards. Envair Technology Suitable for handling biological agents up to ACDP Hazard Group 3, provided proper laboratory siting. Ideal for cell culture and related work. Envair Technology Design & Construction Width: 1200 mm. External body: Constructed from white polyester-coated mild steel. Work zone: Lined in 304-grade stainless steel with side-glazed panels. Work surface: Removable and dished, crafted from 316-grade stainless steel. Envair Technology Airflow & Filtration Offers recirculating or ducted configurations. Equipped with downflow HEPA filtration (Class H-14, ≥ 99.995% efficiency) according to EN 1822‑1 standards. Lighting & Fans Illuminated using low-energy LED lighting mounted external to the work area. Ventilation is powered by independent EC-type energy-efficient fans, both above and below the working zone. Envair Technology Control Interface Features an integrated positive-touch membrane control panel positioned above the work area, with animated display feedback. Envair Technology Compliance & Standards In addition to BS EN 12469:2000 and HEPA filter standards, the Bio 2 Essential cabinets also meet: IEC 61010‑1:2010 Air quality standards: ISO Class 5 (BS EN ISO 14644‑1:2015) and EU GMP Grade A.