Used Wig Welder for sale (367)

Condition: not inspected (used), functionality: unexamined, total height: 1,100 mm, total width: 400 mm, total length: 500 mm, overall weight: 30 kg, No minimum price – guaranteed sale to the highest bidder! Podoyn A U Sepfx Aaasgi Placing a bid obligates timely collection, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 500 x 400 x 1,100 mm Weight: 30 kg EQUIPMENT Matching hose package External reference: CES - Lot 157

Year of construction: 2018, condition: good (used), Fully automatic angle sealer / Fully automatic side sealing machine Manufacturer: Diez Model: AWS-C 9070 CS Year of manufacture: 2018 Pjdetzcd Sopfx Aaajgi Shrink tunnel Manufacturer: Diez Model: HTC 122-40D Year of manufacture: 2018 Operator side: Left in running direction Passage width: approx. 600 mm Passage height: approx. 190 mm Sealing length: approx. 900 mm Working height / conveyor height in-feed/out-feed: approx. 860 mm +100 Performance: Up to 30 cycles/min (depending on package size and feed speed) Connection voltage: 230V AC, 50Hz, 1Ph + N + PE Power consumption: 3.5 kW Rated current: 10 A With cable and 16A Schuko plug Compressed air connection: 6 bar External dimensions: Length: 2600 mm Width: 2000 mm Height: 1500 mm 18326ä

Condition: new, Year of construction: 2018, Automatic angle welder Manufacturer: Diez Model: AWS4535 Podpfewriuuex Aaajgi Year of manufacture: 2018 No operating hours! Welding frame: 500 x 350 mm Belt width: 32 mm External dimensions: 170 x 130 x 135 cm 18326ä

Condition: new, Year of construction: 2026, Equipment: documentation/manual, Laser welding machine with 3 kW laser power, laser components from Siemens - welding machine with genuine CE and therefore also German manual, risk analysis and everything that is required to be able to operate a laser welding system in Germany. Wire feed case, also with genuine CE, is also included in the delivery. An introduction can take place here in the company. Pgsdpfxsn Sl D Ro Aaaei

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, hose package length: 4,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. Pedpfx Ajyk Tnzoaaogi We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: GA0500VBG1780, working width: 1,600 mm, wire diameter (max.): 8 mm, type of input current: three-phase, nominal power at 50% duty cycle: 100 kVA, input voltage: 400 V, air pressure: 6 bar, electrical fuse: 800 A, We are offering this used Ideal GAE 516/07-07-20 mesh welding machine, year of manufacture 2017. Manufacturer: Ideal Model: GAE 516/07-07-20 Year: 2017 Condition: used Machine type: mesh welding machine Designed for resistance welding using single-phase DC technology of shopfitting and industrial grids, wire shelves, reinforcements, and other wire products. Features: - Extension for automatic feeding of lower cross wires (4 - 8 mm) for the production of double rod mesh panels - Loading magazine for flat bars (max. 2,000 mm) - 2 notching units for trimming cross wire projections from the welded product The machine is fully operational and can be inspected under power. A total of approx. 80,000 grids have been produced with the machine. Mesh width: 250 - 1,600 mm Mesh length: 450 - 2,200 mm Welding width: 1,600 mm Longitudinal wire diameter: 2.5 - 8 mm Cross wire diameter: 2.5 - 8 mm Minimum longitudinal wire spacing: 25 mm Minimum clear cross wire spacing: 10 mm Pneumatic welding cylinders: 7 units Three-phase current: 400V / 50 Hz Fusing: 800 A / phase Air pressure: 6 bar Air consumption: 20.0 Nl/cycle Cooling water consumption: 4 bar, 21-25°C, approx. 80 l/min Pjdpfxsym Aqds Aaaegi If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Band saw welder IDEAL model BSO Podpfexw H Srex Aaajgi

Condition: excellent (used), Year of construction: 2013, PRATTO equipment for zinc coated welded meshes Technical data for the machine : STARWELD PE is a high-performance mesh welding line for the production of fine & light mesh in rolls or rolls & sheets • 2 pay-off for feeding the cross wire • 36 pay-off for feeding the line wire • Fence dimensions between 1 and 3 m (2 types can be made simultaneous, example 1 m with 2 m, 1.5 m with 1.5 m, 1.2 m with 1.8 m) Pgodpsyxn Rnefx Aaaei • Range of wire diameter 1.2 – 3 mm • Working speed (strokes/min) Up to 130 • Automatic stacking of rolls • ⁠PLC management

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: A32404019520, type of input current: three-phase, input voltage: 230 V, overall weight: 53 kg, type of cooling: air, laser power: 1,500 W, shaft length: 1,080 mm, continuous power: 1,500 kW (2,039.43 HP), Equipment: documentation/manual, head guard, type plate available, Operation - Simplest operation via synergy characteristic curves - Achieve finished welding results in just three steps. Automatic adjustment of power, wire feed, oscillation width, oscillation frequency, laser frequency, PWM, hot start, etc. - High-resolution display ensures optimal readability of all necessary parameters. An integrated help function provides a better understanding of the adjustment options - Fully integrated operation in the wire feed cabinet – optional operation via machine or wire feed system Technical Features - High-performance laser cells paired with gas-cooled torches ensure maximum power and focus stability - 2-in-1 machine: Welding and cleaning. Laser cleaning is ideal for paint removal, rust removal, and scale removal - Optional: Dual wire feed Safety - Two-channel emergency stop system - Two-channel safety interface for access control (door contact switch) - Key switch to prevent unauthorized use - Two-channel fiber break detection as well as monitored QBH connection - Safety notices and manual activation of laser release at every start - Dual-action button prevents unintentional activation of the laser - Suitable for heavy-duty applications Advantages of Laser Welding Compared to Conventional Welding Methods - Minimal distortion, extremely fast, outstanding quality (even with very thin materials < 1 mm) - Consumes approximately 70% less energy - Quick and easy to learn - High process reliability - Extreme time savings with significantly reduced rework - One of the lightest torches on the market, weighing approx. 680 g - Two-channel safety circuit for maximum safety Advantages of Craft-Laser - Laser cleaning with up to 100 mm scanning width and autofocus Pgjdsyuvktepfx Aaaoi - 2-in-1 machine: welding and cleaning - Full synergy – no more parameter lists - Service-friendly – no more inconvenient shipping required

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: water, welding current (min.): 60 A, welding current (max.): 450 A, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled 3-month warranty Suitable for: Heavy steel and stainless steel construction, 3-shift operation, workshop. Not suitable for: Hobby use, thin sheet metal. Specifications: 60-450 AMP 380 Volt Water-cooled Pgjdeyhd A Rspfx Aaasi 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), I sell Dalex- Werke PMS11-3 spot welding machine, 172KVA, in bdb condition. Pgjdpfx Aeu Sb Dtjaasi

Condition: excellent (used), Angle welding machine Make: Meurer Model: CM/W3 Year of manufacture: 2002 Welding frame: 460 x 700 mm 220 volts Length: 1950 mm Pgedpfxox Tpf Ns Aaaei Depth: 770 mm Packing table height: 870 mm

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Jäckle, water-cooled TIG welding machine -Type: TIG 301i DC -Welding power: max. 300 A, see nameplate -Cooling device: KG 2 Pgedpfx Asqwprneaaji -Accessories: including ground cable, hose package -Dimension: 730/620/H1180 mm -Weight: 73kg

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Pgsdpfx Aaexddameaoi

Year of construction: 1999, condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: N SERIE: 99 1220, Hot air Polypropylene box seam welder. Manually fed polypropylene welding machine. Pgedpfx Aaow Elrpeaji

Year of construction: 2007, condition: used, THERMATOOL High Frequency Welding CFI 350 kW VF Fully revised in 2025 by Thermatool specialists Technical specifications Output power: 350 kW Pgedpfxjymadbo Aaaoi Welding frequency: 180 - 300 KHz Input voltage: 380 VAC / 50 Hz Total installed power 525 kVA Output power: 350 kW Welding-frequency: 180 - 300 KHz Input Voltage : 380 VAC / 50 Hz Total installed power: 525 kVA

Year of construction: 2021, condition: used, GH INDUCTION | EMMEDI HF welder 100kW In excellent working conditions. Year 2021. Solid-state high-frequency induction heating generator 100Kw for tube welding applications · Welding frequency: 400 KHz Podoyl U R Hjpfx Aaasgi · Power: 120 KVA · Modules: SiC SiliconCarbide IGBT Scope of supply · Power cabinet with digital control (MPC-3 HMI touchscreen interface) · Oscillator module · XYZ motorized inductor positioning system · Operator control desk with diagnostic display, manual/automatic modes · Cooling system with air–water heat exchanger Welding frequency: 400 KHz Power: 120 KVA Modules: SiC SiliconCarbide IGBT

Year of construction: 2008, condition: ready for operation (used), Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used. Pgjdpfelp N Eyex Aaaoi

Year of construction: 1996, condition: good (used), PTW 150 Complete orbital tube welding machine with two complete and fully overhauled welding heads, (and 2 extra fully operational welding heads, respectively for up to 2" and 4") (see pictures) for sale. It includes "collets" (clamping sleeves) for most pipe dimensions from ½" to 4". This equipment is one of 5 orbital welding machines I have had, and it has mainly been used on 54x2mm, in addition to building 5-6 central gas systems with tubes of 12-18 and 28mm, and some 88.9mm. The equipment is complete, ready to weld with cables, gas hoses, red. valve etc. The equipment is delivered in original transport boxes, has complete set of manuals/part lists. Buyers can have the equipment delivered to their door, and up to 1 week of free training (including with many years of experience!) anywhere in Europe! New orbital equipment with the same spec, would cost typical some €40k + with just ONE weldhead. (One enclosed weldhead is typical €12-13000 without collets, typical €300 /dimension you will weld) At the two plants in Norway that operated with nuclear power (Kjeller and Halden), the same type of welding machine was the only one that was able to weld according to the requirements they set! (like 100% Helium, - 200 bar, - vaccum etc) The user interface is simpler on newer machines, but if you can calculate the circumference of a tube, you are well off. If you are wondering if orbital welding is something for you, it involves very little risk when you can get complete equipment, delivered on your door step, welding program for all pipe dimensions from ½" to 4" and one week of training for €10k, (and in addition 3 decades of experience) Pgodpfxeycwk Ro Aaaji

Year of construction: 2000, condition: used, TIG welder direct current 380 Volt for stainless steel Arkoquad 220 40 % ED at 220 AH 10 % ED at 140 AH with torch Ground cable Pressure reducer Water cooling Pgsdpfxegt Auue Aaasi

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 690 mm, total width: 325 mm, total length: 890 mm, input voltage: 400 V, ground cable length: 3,000 mm, overall weight: 42 kg, warranty duration: 24 months, welding current at 60% duty cycle: 250 A, hello , we are the belgian importer of the Stayer range , we have a large stock of this item possible quantity price per 1 pc - 1800 € htva/pc per 3 pcs - 1440 € vat/pc per 10 pcs - 1080 € vat/pc Synergic MIG-MAG welding equipment, coated electrode and Spot. - Easy polarity reversal for hollow wire (flux core). - Two high-brightness displays for simultaneous monitoring of current and voltage with true real-time values. - Manufactured to strict European specifications 2014/35/EU, 2014/30/EU and 2011/65/EU and IEC 60974. - Suitable for 3x400 generators. Capable of handling ±17% voltage variations. - Professional wire feeder, with 60W motor, safe and stable transmission, suitable for large spools up to 15 Kg. Includes thread rollers grooves for 0.6 mm, 0.8 mm and 1 mm. Power rating 250 A Voltage 230 / 400 V Pgjdpfx Ajuh A U Ajaaoi Duty cycle 60 Coated electrodes 1.6 - 6.0 mm Wire thickness 0.6 - 0.8 - 1.0 mm Coil weight 5 - 15 kg For use with 12 KVA / 230V ±17% generator Dimensions 89 x 69 x 32.5 cm Weight 42 kg DINSE terminal 1/2" (35 - 50) ø 2m x 2.5 mm² power cable Cable + earth clamp 3m - 25 mm² Cable + electrode clamp 3m - 25 mm² MIG torch 25 AK Gas hose 3 m x2 (0.8 - 1.0) mm

Condition: used, THERMATOOL HF welder CFI 200KW In excellent working conditions. Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz Scope of supply - DC Power cabinet - HF cabinet with auto-match system and output busbar to coil holder - Single axis adjustment table - Operator HMI diagnostic system/controls - Closed loop Water cooling pump/heat exchanger - Spare electrical cards x 12 - Spare thyristors/power supplies(4) / spare auto-match drive belts - Approximately 40-45 induction coils in various sizes to suit tube range 19-89mm Solid State HF welder: CFI200 Output power: 200 kW Welding frequency: 400 KHz Pgodpoymad Iefx Aaaji

Condition: used, SOLID STATE HF WELDER EFD INDUCTION WELDAC 250 kW SCOPE OF SUPPLY 1. Complete welding unit EFD Weldac 250Kw 2. Input Autotransformer 3. Complete cooling unit and water circuit 4. Control desk with PC Pgjdpjymak Uofx Aaaei 5. Existing documentation 6. Output busbar TECHNICAL DATA Manufacturer EFD Induction Model WELDAC 250 Nominal power (output power): 250kW Welding-Frequency (nominal): 250 -310Khz Total installed power: 346KVA Nominal power: 250 kW Welding frequency range: 250 -310 kHz Total installed power: 346 kVA

Condition: used, TIG + Shielded Metal Arc Welding Machine MESSER GRIESHEIM Type Uniwig GW 280 AC/DC Serial No. 4930185 Year of manufacture: 1985 Performance for TIG welding: 280 amps at 80% duty cycle (AC) 250 amps at 100% duty cycle (AC) 230 amps at 100% duty cycle (DC) Performance for stick electrode welding: 250 amps at 100% duty cycle (AC) Pgsdpfoxf Uw Sox Aaaoi 200 amps at 80% duty cycle (DC) Adjustment range: 3 coarse steps and infinitely variable Power supply: 400 volts, 50 Hz - 4-meter hose package with TIG torch - 2-stroke and 4-stroke welding function - Weld time setting for spot welding - Water-cooled - Gas pressure regulator Required space (L x W x H): 1050 x 590 x 1000 mm Weight approx. 300 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 24 months, type of cooling: water, welding current at 60% duty cycle: 350 A, welding current at 100% duty cycle: 300 A, welding current (min.): 20 A, welding current (max.): 350 A, For sale: Kolarc XM350 20-350A 400 Volt +- 10% Water-cooled Pulse Double Pulse XRoot XDeep Position XStabil XCold 406 Fixed programs Program memory 4 Roller drive New Pedpfx Aajxyh Akeaogi Including 4 Meter PRO5000 MIG/MAG Welding torch, 5 Meter 50mm² earth work lead, gas cable, and interconnection package. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.