Used Wilhelm for sale (149)

Condition: reconditioned (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 270018, Connected load 380V 6,6A 3kW Hfodoh Uxq Topfx Ag Nen band saw length 5110 mm fence suction 100 mm machine table tiltable with hand wheel Foot brake

Condition: like new (used), Year of construction: 2022, OEM – laser marker / engraving laser (diode pumped YAG-laser) The laser beam source was used for some time to generate plasma as part of a scientific project. Overall, however, it only has few operation time. Due to the short pulse length, this laser is also very suitable as an engraving laser Laser source of the complete system is a 10 Watt diode-pumped YAG-laser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). Hjdpfxepyg N As Ag Njfn The laser is prepared for an integration into a ‘higher level system’, but can also be used as a 'stand alone' system. In this case interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Extraction unit with rotary valve rarely used. The unit was installed incorrectly – the rotary valve was never properly connected to a transport line or container and was therefore rarely used due to the inconvenience. However, if a rotary valve is needed, this unit is a very good solution. We are happy to assist with questions, planning, implementation, installation, and service. The unit will be fully tested and delivered to you in perfect condition. Hedpfx Agjwhpcqe Njfn The integrated pre-separator protects the filter bags from direct impact and achieves a high pre-separation efficiency by expanding the airflow of the intake air. The resulting significantly reduced filter load significantly increases the service life and lifespan of the filter bags. The fan, located on the clean air side, is housed in a flow-optimized housing. The sophisticated design of the steel impeller with backward-curved blades achieves maximum efficiency. The motor is located in the return airflow and is covered with a sound-insulated hood. The PLC control system built into the unit's housing offers both manual start and automatic ON/OFF switching via a potential-free contact on a machine. The filter is automatically cleaned after each suction cycle. Technical specifications POWER UNIT 300 P-ZRS: - Intake nozzle 300 mm - Motor rating 7.5 kW; 3-phase; 400 V/50 Hz; IE 3 - Maximum flow rate 6000 m³/h - Nominal flow rate at the nozzle at 20/22 m/s: 5089 / 5595 m³/h - Negative pressure at the nozzle at 20/22 m/s: 2587 / 2212 Pa - Filter area 30 m² (90 x Ø 95 mm, 1150 mm long) - Filter cleaning: Compressed air cleaning - Filter material Cat. M, el, white, washable - Filter load 170 m³/m²/h - Maximum sound pressure level 71 dB(A) (free-field measurement according to DIN EN ISO 11201) - Residual dust content H3 /

Condition: good (used), functionality: fully functional, machine/vehicle number: EF17DL 50980, Year of construction: 2005, operating hours: 9,910 h, load capacity: 2,500 kg, Mitsubishi Gas-Powered Forklift with Swing Arm Hfjdpfjv Sqd Ejx Ag Njn Model FG25N Year of Manufacture 2007 Rated Power 42 kW Load Capacity with Attachment: 1000 kg Load Capacity without Attachment: 2500 kg 9,910 Operating Hours Available immediately! Further information upon request!

Condition: good (used), Year of construction: 1994, functionality: fully functional, Format circular saw Altendorf F 45 Year of manufacture: 1994 S/N 94.09-172 Manufacturer: Wilhelm Altendorf GmbH & Co. KG General Information Machine type: Format circular saw Version: Without scorer Technical Data Aluminum sliding table 3000 mm Main saw blade diameter: max. 450 mm (recommended: 300–350 mm for standard work) Cutting height at 90°: up to approx. 150 mm (dependent on saw blade diameter) Cutting length (sliding table): depending on version, typically 3000 mm Cutting width at rip fence: approx. 1000 mm Main saw speed: Multi-stage – approx. 3000 / 4000 / 5000 rpm Main saw motor power: approx. 4 kW (optionally up to 5.5 kW) Saw blade tilting: 0–45° (manually adjustable) Height adjustment: manual via handwheel Hfodpfxewrfmae Ag Non Equipment Massive, ball-bearing aluminum sliding carriage (precision-guided) Crosscut fence with adjustable angle stop and flip stops Robust rip fence with fine adjustment and digital display Table extension (depending on configuration) Mechanical height protection / saw blade guard Features No scorer: The machine is especially suitable for solid wood and rough cutting of panel materials. Solid industrial quality – durable solid mechanics, easy maintenance Cast iron machine table for high smoothness and precision EXTRA: Altendorf Digit X readout unit at the rip fence Weight 1,100 kg L x W x H = 3.0 m x 1.6 m x 1.5 m

Condition: reconditioned (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 7867/162, Power connection 400V 4,0kW suction connection 1x Ø 100 mm, 1x rectangular 300x140 mm spindle Ø 30 mm height adjustable via handwheel Hjdpfx Ash Ux Rwsg Njfn spindle brake via line pull Spindle lock via locking pin right/left rotation 2 speeds spindle not tiltable LxDxH: 1060 x 960 x 1100 mm weight approx. 650 kg Unfortunately, we cannot answer inquiries without complete contact information.

Condition: ready for operation (used), Year of construction: 2023, OEM – laser marker (laser class 4) Laser source is a 20 Watt fiberlaser with 1064 nm wavelength. The working area is 100 x 100 mm, up to 300 x 300 mm is available as an option. No external cooling is necessary. Input-voltage: 110...240 VAC / 50 Hz. Hedpfx Aen Atmvjg Nefn Further applications are laser engraving and material ablation. The control software is installed on a PC, optionally also a Laptop can be used. The language of the software can be choosen (German, English). The laser is prepared for an integration into a ‘higher level system’. For this interfaces for Interlock, emergency stop, laser control etc. are available. We are happy to support the customer according to his requirements.

Condition: used, Technical information: - Engine power - 11 kW - Maximum engine diameter - 690 mm - Minimum engine diameter - 150 mm Hjdpjvuqn Njfx Ag Nefn -Two types of clamping jaws - Foot switch - Weight - 1250 kg - Dimensions - 2950 × 1150 × 1250 mm - Control panel with an electrical security system For further information please refer to the technical data sheet or request it.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 081263, Connecting value 380V 1,85kW 4,8A pressure beam length 3100 mm pneumatic material clamping with hand lever valve chassis stop ruler 520 mm long Hodsh U Dbrjpfx Ag Nefn 6x support brackets

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. Hfodpeph U Ansfx Ag Nen The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: new, Year of construction: 2022, functionality: fully functional, MOSA generator GE SX-18054 KDT Diesel generator KOHLER KDW1003 - three-phase synchronous generator - water cooling NOMINAL OUTPUT POWER Three-phase standby power: 17.5 kVA (14 kW) / 400V/25.2A Three-phase PRP power: 16 kVA (12.8 kW) /400V/23.1A Single-phase PRP power: 7.5 kVA/kW /230V/32.6A Frequency: 50 Hz Hfodjvunuyjpfx Ag Njn GENERAL DATA Tank capacity: 38 lt. Running time (75% of PRP): 10.3 h Measured sound level Lwa (pressure LpA): 93.6 dB(A) (68.6 dB(A) 7m) Guaranteed sound level Lwa (pressure LpA): 95 dB(A) (70 dB(A) 7m) Dry weight: 394 kg Dimensions (LxWxH): 1650x710x931 mm For further information please refer to the technical data sheet or request

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 1277/8-71, Connected load 380V 7A cutting length 4300 mm cutting height 1925 mm rack height 2210 mm machine height 2500 mm room height 2540 mm trimming height 1870 mm Hedpfx Ageh U Sqre Nsfn Passage height 1940 mm

Condition: used, Year of construction: 2022, MOSA GE 40 KR-5 generator Diesel generator KOHLER - KDI 2504TM-40 - Three-phase synchronous generator - water cooling NOMINAL OUTPUT POWER THREE-PHASE Power Three-phase stand-by: 38 kVA (30.4 kW)/ 400V / 54.8A Power Three-phase PRP: 34 kVA (27.2 kW)/ 400V / 49A Frequency: 50 Hz Hjdpfsvunr Eex Ag Nsfn GENERAL DATA Tank capacity: 150 lt. Running time (75% of PRP): 23 h Measured sound level Lwa (pressure LpA): 90.6 dB(A) (65.6 dB(A) 7m) Guaranteed sound level Lwa (pressure LpA): 91 dB(A) (66 dB(A) 7m) Dry weight: 1125 Kg Dimensions (LxWxH): 2151x950x1478 mm For further information please refer to the technical data sheet or request it.

Year of construction: 1990, condition: used, Power supply 400 V 3 kW Glue roller Milling unit 2x flush Hodpekkfk Nefx Ag Nofn roll material up to 0,4 mm LxWxH: 3150 x 680 x 1250 mm weight approx. 400 kg Conversion to 2 mm PVC edges possible = additional price 1.000,00 €

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024009, type of input current: three-phase, input voltage: 400 V, volume flow: 4 m³/h, negative pressure: 2.75 Pa, Oil mist separator filter system HEAB OUK 8,000 and 3x HEAB EMU 10-L Year of manufacture 02/2024 Motor power: 5.5kW Voltage: 3x400V 50Hz Fan type: VE 5,500 Vacuum pressure max. 2750Pa Volume flow (AP): 4000m^3/h Filter type 1: Pre-filter PPI60 Filter type 2: F9-M100089 Filter type 3: H13-M100137 Hfodpfeultu Aex Ag Njn Machine number: 2024009 Included is a piping system, including 6 extraction hoods and 3x HEAB EMU 10-L filter systems.

Condition: not inspected (used), Milling fence with wooden stop jaws, each 760 mm long 30 milling arbor incomplete control panel on top Hfjdei Atftepfx Ag Non cable w. plug 16 A 130 mm suction diameter table 1000 mm wide, 800 mm deep motor approx. 4 kW, total power consumption 12,5 Amp. belt tension via handwheel spindle height adjustment via handwheel infeed jaws individually adjustable via handwheel

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 48,412 h, TRUMPF TruLaser 7040 Double-head machine Hfodpfovnra Hox Ag Njn Year of manufacture: 2012 Power: 2 x 3200W Operating hours: 48412 hours Machine weight: 16,000 kg Available from Q2 2025! Further information on request.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 402, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 300 mm, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Hfjdpfx Aovi H Dijg Nen Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: not inspected (used), driven conveyor belt length 5000 mm, conveyor belt width 700 mm, discharge roller front and rear incl. adjustable feet Hjdpepq Tatsfx Ag Nefn

Condition: new, Year of construction: 2024, saw band length: 4,080 mm, table width: 550 mm, table length: 860 mm, space requirement width: 930 mm, space requirement length: 1,150 mm, space requirement height: 2,000 mm, power: 3 kW (4.08 HP), empty load weight: 280 kg, Closed base with high stability Safe and smooth saw cuts in wood Heavy, tilting cast-iron work table with polished surface Powerful motor Hfodpotp Hbvofx Ag Njn Safety switch stops the machine when the door is opened and prevents unintentional restarting and starting Cast iron flywheels ensure smooth running Set cutting width can be easily read on a scale

Condition: reconditioned (used), functionality: fully functional, Drilling and pressing machine for all types of furniture fittings, rows of holes and hole group drilling machine in system 32 Hjdpfxjumw Sbj Ag Nsfn Power connection 400V 0.75kW Spindle speed 2800 rpm Stop ruler 960 mm 2x swivel stop for drills with shaft diameter 10 mm Workpiece thickness max. 40 mm 1x 7-spindle drilling head for row of holes, pitch 32 mm with integrated pins Manual feed Base at an additional cost Olive drilling head €450.00 Mepla drilling head with pressing die €550.00 Hettich drilling head with pressing die €550.00

Condition: new, Year of construction: 2023, Basic equipment Diameter planing shaft 70mm, 3 knives of 410 mm Anodized planing fence 90°- 45° Total length 1800 mm Dressing fence 1500 x 150 mm Maximum chip removal 4 mm Passage thick planer 410 mm x 230 mm Hfedpfx Asmft Nkeg Non weight: 325 kg incl. special accessories: TERSA cutter block

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Cross-section milling machine for large and complex profiles of all types for furniture, stairs, and balcony railings Tool clamping width 250 mm Maximum tool cutting diameter 250 mm Milling height 200 mm Milling depth 65 mm Spindle diameter 40 mm Hfedsv Up U Ispfx Ag Nen Motor power 11 kW Milling spindle speed 6000 rpm Table size 1000 x 410 mm 2 pneumatic clamps, two-hand operation

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: Hjdjtwz Tlopfx Ag Nefn 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand