Used Wire Bird for sale (3,465)

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Classic 2S Year of construction 2006 Travels: X= 350 mm, Y= 250 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Gsdpfx Asuzvkgobdjil Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in bath) / 450 (without bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Available wire diameters: 0.20 - 0.33 mm Water bath machine with automatic wire threading and rethreading after wire breakage With manual front door (accessible from 1 side) Incl. AGIEJOGGER handbox for convenient set-up AGIE IPG generator AGIEVISION control unit Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and overhauled after receipt of order. A test cut with the best surface finish is then carried out for acceptance. You receive a 6-month warranty on the machine. We are happy to offer you commissioning and training on site.

Condition: ready for operation (used), functionality: fully functional, Technical Data – SENY D75B: Gsdpexm Stgofx Abdsil Rolling Pressure: 220 kN Workpiece Diameter: min. 3 mm – max. 70 mm Maximum Pitch: 6 mm Maximum Groove Pitch: 2.25 mm Maximum Roll Width: 160 mm Roll Diameter: min. 133 mm – max. 170 mm Roller Shaft Rotational Speeds: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Roll Holder Shaft Diameter: 54 mm standard – 69.85 mm special Distance Between Shafts: min. 135 mm – max. 230 mm Working Stroke: max. 15 min Feed Rate: 0.5 mm/s – 6 mm/s Rolling Time: 0.1 s – 100 s Pause Time: 0.1 s – 100 s Main Motor Power: 5.5 kW Electrical Consumption: 8.6 kW Reservoir Capacity: 130 liters Weight: approx. 2,100 kg. Additional rolls available: M4.5 x 0.75 ISO. M6 ISO. M10 ISO.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Gisdpfx Absxnkbledel Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min Godpfxewrt T Us Abdjil power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg

Condition: used, Year of construction: 2023, Wire erosion / EDM Travel distance X: 400 mm Gedpexdnkiefx Abdoil Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 850 mm max. workpiece size Y: 610 mm max. workpiece size Z: 250 mm max. workpiece weight: 500 kg table size X: 630 mm table size Y: 493 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150x150mm generator: 40 Ampere

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, wire diameter (max.): 10 mm, input frequency: 50 Hz, workpiece weight (max.): 70 kg, type of input current: three-phase, Equipment: cooling unit, OMEGA CM43 Submerged EDM wire The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse Giodewr Utiopfx Abdel If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 -Travel speed: 5/20 m/min -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm Gjdpfx Astlzdqsbdsil -Weight: 462 kg/piece

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3 Gijdpfx Abow Spa Nodol

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Gisdsxni T Hopfx Abdel Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Condition: used, Year of construction: 1976, number of stapling heads 1 Gjdpfxov Ach Rs Abdoil

Condition: used, Year of construction: 2020, Wire erosion / EDM Gedpfxew H Aw Es Abdsil Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 270 mm max. workpiece size X: 920 mm max. workpiece size Y: 700 mm max. workpiece size Z: 215 mm max. workpiece weight: 5000 kg submerged cooling unit

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: D12L/8393, Offer Number: D12L/8393 Machinetype: wire nail press Make: WAFIOS Type: N41 Constr. year: 1987 diameter range: 1,8-3,4 mm nail length: 13-80 mm output - pieces/min: 550 Location: In our warehouse Gsdpfoxnykpjx Abdoil

Condition: good (used), Indoor crane, crane, electric wire rope hoist, hoist, motorized winch, motor winch, tackle, pulling winch, pulley block -Nominal load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Lifting height: about 30 m -without service -Dimensions: 1600/330/H470 mm Gijdod Dzlmjpfx Abdol -Weight: 356 kg

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm Giedpfxjw Spbto Abdjl travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 9710C365, workpiece weight (max.): 250 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, controller model: FANUC SERIES 16-W, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is November 20, 2025! Placing a bid obligates you to collect the machine on time between December 1, 2025 and December 5, 2025! TECHNICAL DETAILS Travel distances Travel X-axis: 320 mm Travel Y-axis: 220 mm Travel U-axis: 120 mm Travel V-axis: 120 mm Travel Z-axis: 180 mm Max. workpiece weight: 250 kg Feed rate in X and Y axes: 900 mm/min In U, V and Z axes: 450 mm/min Table dimensions: 530 x 330 mm MACHINE DETAILS Control: FANUC SERIES 16-W Giodpfx Abexnl Umodel Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,400 mm Weight: 3,000 kg EQUIPMENT Coolant tank

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBMA-GI, 1x ABUS wire rope hoist Crane hoist 6300KG 6.3to GM2063H6-201.41.063 E160 4 pieces available Gsdpfxovbck Ae Abdoil Payload 6300KG / 6.3t payload / lifting load - 4 strands with 2 lifting speeds, lifting height approx. 6m, track width of the lifting gear approx. 30cm (+- a few cm adjustable) with control bottle and connection plug for the power supply Weight complete approx. 400 kg, connection to 400V 50Hz Very good condition, see pictures Item location is 75053 Gondelsheim See pictures

Condition: used, Year of construction: 2014, Wire erosion / EDM Travel distance X: 400 mm Gsdpfxow H Awxs Abdjil Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 600 mm max. workpiece size Y: 470 mm max. workpiece size Z: 240 mm max. workpiece weight: 500 kg table size X: 860 mm table size Y: 690 mm with AWF ( Automatic Wire Feeding ) U / V axis: 150 x 150 submerged cooling unit

Condition: excellent (used), Stroke X-Y-Z 500 x 350 x 300 mm Gedpoxl A Aisfx Abdeil Workpiece dimensions 1050 x 800 x 295 mm Workpiece weight 1500 kg U+V-Axis +/- 21 mm Misc. accessories MARCELS MASCHINEN AG

Condition: good (used), Glass silk nickel stranded wire, cable stranded wire Godpfx Ajb A Svmobdoil -Type: 1.5 mm² -Wire: 1 -Length: 100 m -Weight: 2 kg

Condition: used, Year of construction: 2002, Wire erosion / EDM Travel distance X: 750 mm Travel distance Y :500 mm Travel distance Z: 400 mm max. workpiece size X: 1050 mm max. workpiece size Y: 750 mm max. workpiece size Z: 400 mm max. workpiece weight: 1500 kg U / V axis: 770 x 520 mm generator: 60 Ampere Linear drives Gjdpfx Absw Ei Stodeil

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available -Price: per piece -Weight: 6.6 kg/piece Godpfx Abjpy Ryqsdoil

Condition: used, Year of construction: 2003, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Travel distance Z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 450 kg Gijdpfx Absw Ekr Iodel with AWF ( Automatic Wire Feeding )

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :250 mm Giodswf I Imjpfx Abdsl Travel distance Z: 256 mm max. workpiece size X: 750 mm max. workpiece size Y: 550 mm max. workpiece size Z: 250 mm max. workpiece weight: 200 kg submerged cooling unit The machine has been serviced annually by the manufacturer.

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :220 mm Travel distance Z: 220 mm max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350mm / 220mm Gisdpfx Aovyzgajbdjl submerged

Condition: used, Year of construction: 2018, Wire erosion / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Gijdpfx Absvtftksdjl Coater: Rotation led precision coater Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm