Used Wire Bird for sale (2,885)

Condition: excellent (used), Year of construction: 2016, X-axis: 550 mm Y-axis: 350 mm Z-axis: 400 mm Max. workpiece dimensions: 1,200 x 700 x 400 mm Max. workpiece weight: 1,500 kg Machine weight: 2,850 kg Cutting range: 30 degrees on 400 mm Includes operating manual. Machine can be inspected while powered on. Gisdpozcpifofx Akkou

Condition: used, Year of construction: 2005, operating hours: 18,950 h, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, Wire Diameter 0,1-0,3 mm Automatik Threading Working Hours 18950 Std Verfahrwege X 350 mm Y 220 mm Godswzyvhepfx Akkjiu Z 220 mm U 350 mm V 220 mm Year 2005

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Y-axis: 300 mm Z-axis: 220 mm Giodpfeyvtbysx Akkou The machine was in daily use until mid-April; however, the "automatic threading" function is not working.

Condition: used, Year of construction: 2007, Travel distance: Godeuu Dl Rspfx Akkeiu X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm Gisdpfjw Spa Njx Akkju max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Giedjr E Ht Hopfx Akkou Weight 350 kg Good condition

Condition: used, Year of construction: 2002, Voltage: 400V / 50/60Hz / 3 phases Machining method: Immersion Maximum workpiece size: 1200x700x400 mm Maximum workpiece weight: 1500 kg Table dimensions: 900x600 mm Gjdpfxeza U Nlo Akkeiu Distance from floor to table: 900 mm Total dielectric fluid volume: 1200 L Axes X, Y, Z, U and V Travel ranges X, Y, Z: 550 x 350 x 400 mm Travel ranges U, V: 550 x 350 mm Collision protection: Axes X, Y, U, V, Z Tapered cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (Option 0.1/0.2/0.3 mm) Wire guide type: Closed diamond guide, gap-free Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 kg (P5) Dielectric fluid Paper filter: 2 cartridges Dielectric fluid temperature: +/- 1°C Total volume of ion exchange resin: 20 L Maximum injection pressure: 20 bar Generator: Dual source Isopulse Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 microns Ra Measuring system: Glass scales Measuring resolution: 0.5 microns Servo motors: AC type All technical specifications are subject to change without notice; errors and omissions excepted. The machine was fully functional until it was dismantled. Warranty is excluded.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, 14 calibres, ranging from a maximum diameter of 11 mm to a minimum diameter of 3.5 mm Weight: 260 kg Godpfey Ubthox Akksiu In very good, well-maintained condition

Condition: good (used), Year of construction: 2013, operating hours: 1,000 h, functionality: fully functional, SODICK AG 600L CNC wire EDM machine with an extensive accessory package, in excellent condition, a wonderful machine, hardly used. For sale is a high-quality SODICK AG 600L CNC wire EDM machine with SODICK LP2W control, linear drives, and extensive additional equipment. Manufacturer: SODICK Model: AG 600L Machine type: CNC wire EDM machine / wire erosion system Control: SODICK LP2W Commissioning: 07/2013 according to documentation Operating hours: approx. 1,000 hours according to documentation Power generator: 40 A Max. workpiece size: 800 x 570 x 340 mm Travel range X/Y/Z: 600 x 380 x 350 mm Wire diameter: 0.10 - 0.30 mm Machine equipment: Linear drives in X, Y, U, and V axes Glass scales in X, Y, U, and V axes Remote control LAN port Special corner control strategy Flash memory Automatic high-speed AWT 10-year warranty on positioning accuracy according to the original SODICK documentation Wire chopper complete, suitable for AG 400L and AG 600L Additionally included according to documentation: SODICK K1C CNC high-speed drilling machine / starting hole drilling machine Installation / initial training according to documentation Training course according to documentation Clamping system / accessories according to documentation: SMART GRIP adjustable pallet 3D, fixed SMART GRIP prism, clamping width 10 - 100 mm Gisdoy Tabnjpfx Akksu SMART GRIP adapter 90° indexable SMART GRIP clamping jaw, movable SMART GRIP prism jaw SMART GRIP jaw set SMART GRIP jaw set 2 SMART GRIP clamping accessories M8 SMART GRIP slide 475 mm, hardened and rust-resistant SMART GRIP VICE slide 475 mm, hardened and rust-resistant Additional BASIC SET PLUS AG600L, pitch 475 mm, consisting of: Pneumatic control unit P-clamp, pneumatic 2 x 3D adjustable pallet Vise Uni-holder / holder Clamping set Preset plate with carriage Programming system according to documentation: DCAMCUT 8.0 EXPERT / Solut Machining module DCAMCUT EXPERT EDMCAD A Material removal simulation Approximation 4-axis roughing Roughing with predefined islands Partial roughing Spatial curve machining Standard 4-axis NC processor Datakit CAD direct interface CATIA V5 / 3D to SolidWorks, import The machine is ideal for precise wire erosion work in toolmaking, mold making, fixture construction, and precision manufacturing. Note: All information has been taken from the available documentation. The year of manufacture, current operating hour counter, machine weight, and external dimensions should be checked again directly on the machine before sale or inspection.

Condition: good (used), Year of construction: 2012, functionality: fully functional, workpiece weight (max.): 4,100 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, CNC Control without coolant device Gedpfx Ajy S Tp Askksiu Technische Daten – technical details: Verfahrweg X / travel X 350 mm Verfahrweg Y / travel Y 250 mm Verfahrweg Z / travel Z 250 mm Verfahrweg U / travel U +-45 ° Verfahrweg V / travel V +-45 ° max. konischer Schnitt / max. cone cutting +-10 ° Max. Dimensionen des Werkstücks / max. dimensions of the workpiece 820x680x250 mm Tischabmessungen / table size 700x480 mm max. Werkstückgewicht / max. workpiece weight 4100 kg Gewicht ca. / weight ca. 2640 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: good (used), Year of construction: 2006, MACHINE Wire EDM Machine Manufacturer: Mitsubishi Machine Model: FA 20 Control: Year of Manufacture: 2006 TECHNICAL DATA Travel distances - X-axis: (mm) 500 - Y-axis: (mm) 350 Gedpfxoy Snbmo Akksiu - Z-axis: (mm) 300 Machine Table - Table size, fixed table L x W: (mm) 780 x 630 - Max. table load: (kg) 1,500 - Workpiece dimensions: (mm) 1,050 x 800 x 295

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Gisdpfx Akozadkxskou

Condition: good (used), Introma ZD-2D Wire Stitcher Machine in very good condition, recently serviced. Gjdszdavropfx Akksiu Technical specifications: Capacity: 180/min Maximum stitching thickness: 25mm Wire diameter: max. 1mm Power supply: 380V Weight: 230kg The machine features an adjustable table for block and booklet stitching. Front margin. Instructions included.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, lifting height: 10,000 mm, load capacity: 8,000 kg, lifting speed: 6,000 mm/s, fine lifting speed: 1,000 mm/s, input voltage: 400 V, Equipment: documentation/manual, Demag Hoist – Suitable for double-girder cranes – Capacity: 8 tons – Lifting height: 10 m – Year of manufacture: 2019 – Type: Demag F-DMR-10-8-H20/10-4/1-Z-V1/6-400/50-CC A1 – Trolley track width: 1,400 mm – FEM/ISO class: 3m / M6 – Hoist type: wire rope hoist – Rope configuration: 4/1 Gjdpoy Rhhksfx Akksiu Speeds – Hoisting: 6/1 m/min (2 speeds) – Trolley travel: 25/6.3 m/min Features – Crane manual available: yes – Condition: in good condition – Details: 2 units available Including Demag Wheel Sets – Length: 2,900 mm (excluding buffers) – Height: 300 mm – Suitable for 50×30 mm crane rail Features – Equipped with crane travel motors: ZBF 100 A8/2 B050

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8458, Offer Number: D12L/8458 Machinetype: wire nail press Make: WAFIOS Type: S75 Constr. year: wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse Gijdpfey Rz Ttox Akkeu

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: 1970 diameter range: 2,2-3,8 mm Gjdpowi Ubnjfx Akksiu nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Gisdpfx Aoyxfqrokksu Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Gsdpfxey N Df No Akksiu

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, clothesline, PVC wire rope -Wire rope: PVC-coated steel cable -Type: 6x7 FC PVC transparent -Rope nominal diameter 4.0 / 5.0 mm Gisdjpy Ryqjpfx Akkou -Length: 102 m -Quantity: 1 piece available -Price: per piece -Weight: 6.6 kg/pc.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: ±21º / 100 mm Machine weight: 3700 kg Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale Gsdpeza Eppjfx Akkeiu PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Demineralized water tank

Condition: used, TECHNICAL DETAILS TRAVELS - Travels on X/Y/Z axes : 370x270x255 [mm] - Travels on U/V axes : [mm] - Max. taper : +/-30/80 [°/mm] PART - Max. part dimensions : 700x600x250 [mm] - Max. part weight : 500 [kg] WIRE GUIDE - Wire diameter : 0.1-0.3 [mm] - Coil weight : 16 [kg] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 13 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1930x2330 [mm] Gijdpfsxqrqasx Akkeu - Machine height : 2270 [mm] - Machine weight : 2165 [kg] MACHINE HOURS - Number of working hours : 15874 [h] EQUIPMENT - CNC : Fanuc 31i-WA - Cooling unit - Filtration unit

Condition: used, Year of construction: 1963, functionality: fully functional, machine/vehicle number: D06L/7457, Offer Number: D06L/7457 Machinetype: wire and strip bending machine Make: BIHLER Type: RM25 Constr. year: 1963 dia. range: 0,5-2,5 mm width of band: 50 mm feeding length: 170 mm Godpfx Aswi S Rtskkeiu number of slides: 5 punching power: 5 to output - pieces/min: 225 Location: In our warehouse

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm Giodpjw N D Sujfx Akkou output – meter/min: 27-47 distance of barbs: 50-150mm Excellant condition

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !! Giedsuhxqmepfx Akksu

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : Giodpfx Akevfc A Tskju 1x Wafios S150 2X Wafios S120 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm