Used Wire Cut Edm Machine for sale (93,856)

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 4500 kg Main Drive Number of axis 3 Movement Hedpfxswgp S Ao Ag Nenu X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 256 mm Workpiece Workpiece weight 200 kg Additional Equipment Wire System: Wire diameter 0.1-0.33 mm, Wire speed 60-300 mm/s, Wire tension 0-25 N, Wire spool up to 25 kg, Threading system up to 250 mm height, nozzles 1 mm and 2 mm This 3-axis AGIE Challenge 2 eCut wire EDM machine was manufactured in 2006. It offers precision electrical discharge machining capabilities, ideal for detailed and intricate metal work. Consider the opportunity to buy this AGIE Challenge 2 eCut wire EDM machine. Contact us for more information about this machine. Application Types EDM

Condition: good (used), Year of construction: 2006, functionality: fully functional, Travel (X/Y/Z): 350 × 250 × 250 mm Max. workpiece dimensions (X/Y/Z): 750 × 550 × 250 mm Max. workpiece weight: 200 kg (450 kg) Max. taper angle +/- 30°, 100 mm (U/V) travel: +/- 70 mm Automatic wire threading Wire diameters: 0.10–0.33 mm AGIE IPG generator with power module Hnsdpfx Ajxmu R Ujg Nju Machine dimensions (mm): 1640 × 2040 × 2220 mm Machine weight: 3350 kg Cooling external cooling required Best surface finish Ra 0.2 µm Year of manufacture: 2006 Fully functional

Condition: good (used), Year of construction: 1996, Wire EDM machine MATRA ROBOCUT CX-OC X 320mm/900 mm Y220 mm/900MM U120 mm/450 mm Hnodpjucf I Usfx Ag Nsu V120mm/450mm Z180mm/450mm Fanuc control LTD Machine weight 1.5 tons

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Hnedpfx Ajw Sxx Ieg Nou

Condition: good (used), Year of construction: 1998, Controller FANUC Series 16W Max size of wpc. 800 x 730 x 300 mm Max table load 750 kg X travel 520 mm Y travel 370 mm Z travel 300 mm U travel 120 mm V travel120 mm Dia of wire Ø 0,05 – 0,33 mm No. of axes 5 (X, Y, Z, U, V) Capacity of tanks 650 Liters Accessories - Dielectric cooler Hnodpeul Uwlsfx Ag Nju - Coolant unit - Interface RS232 - MPG - Automatic wire threading - Manuals

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, AGIECUT Excellence 2F eCUT Year of manufacture: 2006 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Hnedpfx Ajwwr H Rog Nju Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface finish: 0.1 µm Ra Max. cutting rate in cylindrical cut: 300 mm²/min Available wire diameters: 0.07 – 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes console with 4x USB ports Includes AGIE-Setup 3D The machine has been cleaned, overhauled and thoroughly tested by our technicians. We are happy to offer commissioning and training as well.

Year of construction: 2020, operating hours: 4,200 h, condition: ready for operation (used), General Data Measurements width 2680 mm Measurements depth 2790 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-WB Main Drive Number of axis 5 Hedpfxoxbihwj Ag Njnu Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece weight 1000 kg Media Power consumption 13 kVA Air pressure 0.5 – 0.7 MPa Additional Equipment Automatic Front Door Option 45° Die Guide: Max Taper Angle ±45° / 70 mm 30 kg Wire Feed Unit: Max Wire Weight 30 kg This 5-axis FANUC Robocut alpha iB600 wire EDM machine was manufactured in 2020. It features a maximum workpiece size of 1050 × 820 × 300 mm and can handle weights up to 1000 kg. The machine includes UV axis travel of 200 × 200 mm and a maximum taper angle of ±30°. Equipped with a FANUC 31i-WB controller, it offers precise control and efficient operation. If you are looking to get high-quality EDM capabilities, consider the FANUC Robocut alpha iB600 machine we have for sale. Contact us for more information. Application Types EDM

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: P0050I553, workpiece weight (max.): 500 kg, travel distance X-axis: 320 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed sale at the highest bid! Submitting a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Max. workpiece weight: 500 kg Travel paths X-axis: 320 mm Y-axis: 220 mm Hedpfsv Iazljx Ag Nonu U-axis: 120 mm V-axis: 120 mm Z-axis: 180 mm Rapid traverse X-axis: 900 mm/min Y-axis: 900 mm/min U-axis: 450 mm/min V-axis: 450 mm/min Z-axis: 900 mm/min MACHINE DETAILS Machine weight: 1.2 t Connected load: 13 kVA EQUIPMENT - Water bath machine - Automatic wire feeder - Many spare parts and wear parts

Condition: good (used), Year of construction: 2003, In good technical condition and in working order. Year of construction 2003. X-axis 350 mm. Y-axis 250 mm. Z-axis 256 mm. Workpiece length: 750 mm. Workpiece width: 550 mm. Workpiece height: 250 mm. Machine dimensions: L 1670 mm x W 2040 mm, H 2305 mm. Hnjdpfou Tq Hwsx Ag Nju Machine weight approx. 2600 kg.

Condition: like new (used), Year of construction: 2017, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,250 mm, workpiece length (max.): 975 mm, empty load weight: 4,200 kg, Equipment: cooling unit, Fanuc Robocut C800iB - Model Year 2017 Fanuc's largest wire EDM machine AWF Automatic Wire Threading Turkish Control Unit - Touchscreen Fanuc Link i Remote Control Water Cooler Core Joint Part Holding Twin Servo Wire Tension Control Thermal Compensation Fanuc New Series 15" Touchscreen and Turkish Control Unit Able to make 5 cuts with the standard new power supply and achieve a surface quality of 0.30 microns. New lower head design and lower head tube protected by bellows. Twin Servo wire tension control ensures consistently stable wire tension during cutting, resulting in more precise cuts. Advanced AWF2 system allows for wire threading at the point of breakage. Program transfer and remote control via CF card, USB, RS232C, and Ethernet Standard Features Maximum throughput workpiece clamping (mm): 1250 x 975 x 500 mm Maximum workpiece weight (kg): 3000 kg X-Y axis travel (mm): 800 x 600 mm Z axis travel (mm): 510 mm U-V axis travel (mm): 200 x 200 mm Maximum cutting angle (°/mm) std. Maximum cutting angle (°/mm) opt.: ±30° / 150 mm : ±45° / 70 mm Minimum axis travel (mm): 0.0001 Wire diameter (mm): Ø 0.1 ~ Ø 0.30 Maximum wire weight (kg): 16 kg Hnsdpfx Agexfaqko Nsu Footage (mm): 2900 × 3260 mm Machine weight (KG): 4200 kg Control unit: FANUC

Year of construction: 2006, condition: refurbished (used), AGIECUT Challenge 3 eCut Year of construction 2006 Travels: X= 500 mm, Y= 350 mm, Z= 256 mm Travels U/V axis: +/- 70 mm Hsdpfogfm Rrsx Ag Nonu Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.2 µm Available wire diameters: 0.10 - 0.33 mm Water bath machine with automatic wire threading With automatically lowerable container (accessible from 2 sides) Incl. AGIEJOGGER hand box for convenient set-up Incl. AGIESETUP 3D AGIEVISION control unit AGIE generator with eCut technologies for faster and more efficient processing Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine is cleaned, overhauled and thoroughly tested by us after receipt of the order. We then put the machine into operation on your premises. You receive a 6-month warranty on the machine. We are happy to offer you the following additional services: - Control and maintenance training - Cooling unit - Programming system - Consumables - Clamping devices - Transportation

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 1200 kg Control Unit Brand FANUC Main Drive Number of axis 5 Movement X-Axis Movement 320 mm Y-Axis Movement 220 mm Z-Axis Movement 255 mm V-Axis Movement 120 mm U-Axis Movement 120 mm Hnjdexf N Rmjpfx Ag Nou This 5-axis FANUC Robocut alpha-0iC was manufactured in 2006. It features X-axis movement of 320 mm, Y-axis of 220 mm, and Z-axis of 255 mm. It can handle workpieces up to 500 kg and has a machine weight of 1200 kg. Consider the opportunity to buy this FANUC Robocut alpha-0iC wire edm machine. Contact us for more information about this machine. Application Types EDM

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, AGIECUT Challenge 2 eCut Year of construction 2005 Travel (X/Y/Z): 350 x 250 x 256 mm Travel (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without bath): 200/450 kg Best achievable surface: 0.2 µm Ra Available wire diameters 0.10 - 0.33 mm Incl. AGIE universal clamping frame Incl. AGIE JOGGER handbox Incl. console with USB connection The machine is cleaned, overhauled and tested by us after receipt of the order. Hnodpjrzt Rwofx Ag Nsu We are also happy to offer you commissioning and training.

Year of construction: 2006, condition: ready for operation (used), General Data Machine weight 3000 kg Control Unit Brand FANUC Main Drive Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 370 mm Z-Axis Movement 310 mm V-Axis Movement ±60 mm U-Axis Movement ±60 mm Workpiece Workpiece weight 1000 kg This 5-axis FANUC ROBOCUT alpha-1iC wire EDM machine was manufactured in 2006. It features X-axis movement of 550 mm, Y-axis movement of 370 mm, and Z-axis movement of 310 mm. It can handle workpieces up to 1000 kg and has a machine weight of 3000 kg. Consider the opportunity to buy this FANUC ROBOCUT alpha-1iC wire EDM machine. Contact us for more information about this machine. Application Types Hedoxf N Rtspfx Ag Nsnu EDM

Year of construction: 2018, condition: ready for operation (used), General Data Machine weight 2200 kg Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Additional Equipment Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 General Data Machine weight 2200 kg Control Unit Brand FANUC Model 31i-WB Movement Z-Axis Movement 255 mm Workpiece Workpiece weight 500 kg Additional Equipment Optional Thin wire, Wire diameter [mm]: Ø 0.05 ~ Ø 0.30 Automatic front door UV axis travel [mm]: ± 60 × ± 60 Minimum step increment of the drives [mm]: 0.0001 This FANUC Robocut alpha-C400iB was manufactured in 2018. It features a maximum workpiece size of 730 x 630 x 250 mm and can handle weights up to 500 kg. The machine includes a FANUC 31i-WB controller and supports wire diameters from 0.10 to 0.30 mm. Consider the opportunity to buy this FANUC Robocut alpha-C400iB wire edm machine. Contact us for more information. Hjdpfx Ajw E Rnvog Nonu Application Types EDM

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Hjdpfexnpmgsx Ag Njnu

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Hnsdpfxjxc Elhe Ag Nou

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Hsdexnpkxopfx Ag Njnu

Condition: excellent (used), Year of construction: 2017, Technical datas:   X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Hnedpfsxazx Sex Ag Nsu Automatic Wire Feeding: Length x width x height: Weight (kg): Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: not inspected (used), Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, table width: 515 mm, table length: 640 mm, Wire EDM machine Chmer EDM Type: CD 305G X-path: 400 mm Y-path: 300 mm X-path: 220 mm bed: 515 x 640 mm Year of construction: 2002 Hnsdpsqgcimofx Ag Nju Hours: 16333 Including documentation and parameters Dimensions: 245x200x203 cm LxWxH

Condition: excellent (used), Year of construction: 2003, Machine with water tank and automatic wire threader, cooling unit and software. XYZ axes 500 x 300 x 210 mm, taper +/- 15° at 100 mm height. Hsdju Thd Hjpfx Ag Njnu Accessories: Dongel & laptop, various spare parts (nozzles, filters etc.)

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Hnodow Swd Aepfx Ag Nju

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Hnedpfx Aswt Du Sjg Nju

Condition: ready for operation (used), Year of construction: 2001, Immediately available from a small toolmaking workshop: Mitsubishi Wire EDM Machine Type FA 20 – S Advance Year of manufacture: 2001 Hjdpfxjxn Ryns Ag Nsnu Table load / workpiece weight up to 1,500 kg Travel X/Y/Z: 500/350/300 mm Submerged (water bath) machine Automatic wire threading Complete accessories Price: EUR 4,000.— plus VAT ex location

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Hjdpfjxnkblex Ag Nenu Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg