Used Wire Draw for sale (7,572)

Condition: used, Year of construction: 2004, Wire erosion / EDM Travel distance X: 350 mm Travel distance Y :220 mm Travel distance Z: 220 mm Gedpfjvyzgaex Ag Nekc max. workpiece size X: 1000 mm max. workpiece size Y: 550 mm max. workpiece size Z: 220 mm max. workpiece weight: 750 kg table size X: 680 mm table size Y: 450 mm with AWF ( Automatic Wire Feeding ) U / V axis: 350mm / 220mm submerged

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2009 Travel paths: X= 500 mm, Y= 350 mm, Z= 426 mm U/V axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 420 mm Maximum workpiece weight: 400 kg (submerged) / 800 kg (out of tank) Achievable surface quality: Ra: 0.20 µm Gjdpfsxggdmsx Ag Nokc Maximum cutting speed: 500 mm²/min Available wire diameters: 0.15 – 0.33 mm Submerged wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Including AGIEJOGGER handbox for convenient setup AGIE IPG-V generator AGIEVISION 5 control unit Dimensions (L x W x H): 1940 x 2300 x 2600 mm Net weight: 3460 kg The machine is cleaned and fully overhauled after receipt of order. You will receive a 6-month warranty on all machine parts. We are also happy to offer commissioning and training services.

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Gkodpfxotylpcs Ag Nec

Condition: good (used), Year of construction: 2008, operating hours: 16,000 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Work tank dimensions W x D: 1,264 x 973 mm Max. workpiece weight: 1,500 kg Distance floor to table surface: 1,000 mm Machine dimensions W x D x H: 2,100 x 2,800 x 2,350 mm Machine weight: 5,300 kg Gkodpfx Agjxg Il So Nec Travel of U and V axes: 770 x 520 mm

Condition: good (used), functionality: fully functional, This hammering machine is a model for processing wires. The wire was sharpened on this machine. The machine has been partially overhauled. The mechanical hammer drive was completely dismantled, reworked, greased and reinstalled. The outer parts of the machine were partially refurbished. However, the electrics are old but fully functional. The motor has also been refurbished and is 1.5 KW. The machine has a hammering tool for wire sharpening included, wire diameter up to 1.5 mm. The name of the machine is unknown, but we assume it is an HMP or Felss. Godpfx Aerqfxwsg Nokc

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID:23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Gksdpfxou Edaws Ag Noc Hours: 1629 hours Battery capacity: 48 v / 620 ah – NEW – YOM 2025 Options: - Triplex mast – FFL - PSA (Sick) - Induction / wire guidance complete LIKE NEW!!

Condition: used, Year of construction: 2010, Wire erosion / EDM Travel distance X: 500 mm Travel distance Y :350 mm Travel distance Z: 250 mm max. workpiece size X: 960 mm max. workpiece size Y: 670 mm max. workpiece size Z: 245 mm max. workpiece weight: 850 kg Gkedpfxewpgc Ro Ag Noc with AWF ( Automatic Wire Feeding ) submerged

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, High-Precision Wire EDM Machine AGIE Vertex 1 Year of manufacture: 2008 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): +/- 40 mm Taper cutting: Up to 3° at 80 mm height Available wire diameters: 0.05 mm to 0.2 mm Best achievable surface finish: Ra = 0.05 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg Including AGIEJOGGER handbox for convenient machine setup 15" LCD color display with lift-up keyboard and mouse Godpfx Agjxf Dwns Nskc AGIEVISION control Including AGIESETUP 3D Including AGIEDUO dual-wire system for automatic switching between two wire diameters The machine is cleaned, overhauled, and thoroughly tested by our specialists. We are happy to commission the machine at your site and provide training in control and machine operation.

Condition: used, Year of construction: 1995, functionality: unexamined, machine/vehicle number: XXX, We are going to sell 3 wire edm machines and 1starthole edm machine Gkodpfx Agstylpio Nsc

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: approx1970 diameter range: 2,8-4,2 mm nail length: 15-110 mm Godpfxewi Ubnj Ag Nekc output - pieces/min: 350 Location: In our warehouse

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope Gkedpfjghnanex Ag Nsc -Wire rope: Ø 8 mm -PVC coated -Length: approx. 50 m -Also other crane ropes available -Weight: 6 kg

Condition: good (used), functionality: fully functional, Due to discontinuation of operations, for sale from the Norderstedt location, unloaded. Gkedporn R Rfofx Ag Nec Kugler Paternoster punching machine, suitable for Wire-O and index/tab punching Format 50 x 50 cm Incl. 2 punching tools

Condition: used, Year of construction: 2018, Wire erosion / EDM 3D metal printer Laser Type / Power: Yb Fibre Laser / 250 W Wavelength: 1070 nm Lens: Precision F-Theta Lens Building Volume: Ø 100 mm x 100 mm Reservoir Volume: Ø 110 mm x 200 mm Coater: Rotation led precision coater Godpfjvtftksx Ag Njkc Gas Connection: Argon/Nitrogen Layer Thickness: 20 – 100 μm Scan Speed: Jog 20 m/s, Operation 6 m/s Spot Size: min. 40 μm Machine Opening: 450 x 180 mm

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, High-precision wire EDM machine GF CUT 1000 Year of manufacture: 2015 Travel paths (X/Y/Z): 220 x 160 x 100 mm Travel paths (U/V): ±40 mm Max. taper: 3° at 80 mm height Gedpexfvfwjfx Ag Nskc Includes F-Module, suitable for wire diameters from 0.02 mm to 0.2 mm Best achievable surface finish: Ra=0.08 µm Max. workpiece dimensions: 300 x 200 x 80 mm Max. workpiece weight: 35 kg Includes AGIEJOGGER hand box for convenient machine setup 15” LCD color display with lifting keyboard and mouse AGIEVISION control system Includes AGIESETUP 3D Includes AGIEDUO dual-wire system for automatic switching between two wire diameters Machine dimensions: 1400 mm x 1900 mm x 1970 mm Machine weight: 2,700 kg The machine will be cleaned, completely overhauled, and thoroughly tested by our specialist technicians. We are happy to install the machine at your site and provide training for both control system operation and machine handling.

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06F2S765, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, The machine is currently serviced and in good condition. The wear parts have been extensively replaced. The EDM machine has barely been used in the last four years. Transport, installation and operator training can be organized at an additional cost. Gkjdpfx Agswtd Eds Noc

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: D12L/8271, Offer Number: D12L/8271 Gkedpfx Aswi Tgijg Noc Machinetype: wire nail press Make: WAFIOS Type: N51 Constr. year: 1984 diameter range: 2,2-4,2 mm nail length: 13-105 mm output - pieces/min: 430 Location: In our warehouse

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories Gkodpfx Agjwt N Uqo Nec More pictures and data will follow shortly.

Condition: used, Year of construction: 2004, Travel path: Gedpfx Asw Emfdjg Njkc X 500 mm Y 350 mm Z 300 mm incl. cooler incl. large wire spools

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox Versant 3100 Press’ Object of sale: 1 x Xerox Versant 3100 with the following equipment: incl. Fiery Server EX3100 incl. Paperdeck A-CF03 incl. Booklet Finisher A-GW04 incl. GBC Advanced Punch Pro incl. GBC e-Wire Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Meter readings: Total: Approx. 1,682,602 pages Colour: Approx. 1,190,093 pages Black: Approx. 492,509 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Godpfx Agovf Hhye Nokc The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: Gjdpfxjuuz Iie Ag Nekc - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, FANUC alpha - O I B machine travels: X 320, Y 220, U 120, V 120, Z 180 automatic wire threading Gkjdoxf I D Ejpfx Ag Nec can be seen in good working condition year 2002

Condition: used, Year of construction: 2015, x-axis 550 mm y-axis 350 mm z-axis 400 mm U-axis 550 mm V-axis 350 mm volume 1200 L Gkjdpsxddtmofx Ag Noc inclination +/-30°/400 mm dimensions 1200x700x400 mm weight 1500 kg wire dia. 0,10-0,33 mm Bobbin Weight max. 25 kg

Condition: good (used), Wire feed case for inert gas welding machine, inert gas device, wire feed case, wire feed device -Manufacturer: CLOOS wire feeder, water-cooled -Type: lCK98A -Dimensions: 660/390/H350 mm -Weight: 23 kg Gedpfx Aowrrp Ueg Nekc

Year of construction: 2020, operating hours: 4,200 h, condition: ready for operation (used), General Data Measurements width 2680 mm Measurements depth 2790 mm Machine weight 3000 kg Control Unit Brand FANUC Model 31i-WB Main Drive Number of axis 5 Movement X-Axis Movement 600 mm Godpfxexbihwo Ag Nskc Y-Axis Movement 400 mm Z-Axis Movement 400 mm V-Axis Movement 200 mm U-Axis Movement 200 mm Workpiece Workpiece weight 1000 kg Media Power consumption 13 kVA Air pressure 0.5 – 0.7 MPa Additional Equipment Automatic Front Door Option 45° Die Guide: Max Taper Angle ±45° / 70 mm 30 kg Wire Feed Unit: Max Wire Weight 30 kg This 5-axis FANUC Robocut alpha iB600 wire EDM machine was manufactured in 2020. It features a maximum workpiece size of 1050 × 820 × 300 mm and can handle weights up to 1000 kg. The machine includes UV axis travel of 200 × 200 mm and a maximum taper angle of ±30°. Equipped with a FANUC 31i-WB controller, it offers precise control and efficient operation. If you are looking to get high-quality EDM capabilities, consider the FANUC Robocut alpha iB600 machine we have for sale. Contact us for more information. Application Types EDM

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Gkedpfx Aogiplvsg Nec Length: 5100 mm Width: 1700 mm Height:3100 mm