Used Wire Straightening for sale (3,562)

Condition: as good as new (ex-display), Year of construction: 2021, pressing force: 400 t, Gantry straightening press with 400 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 60 mm/sec c) table size 6000x3000mm d) open height 1500 mm e) total size approx. LBH 6000 x 5000 x 4500 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table in grid construction, i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 60 T to 400 T via MONITOR k) Bridge moves by two gear motors, via toothed racks l) Cylinder moves to the left and right via toothed racks m) Machine body powder coated, or double painted n) T-slots according to customer requirements o) cylinder induction hardened PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 4000 kN Free ripping force max. 600 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 1500 mm Stroke and min. opening 1500 mm/ 0 mm Table height above floor approx. 900 mm Height above floor (headroom) approx. 4500 mm Hall height min. 5500 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 52 T Speeds Fast closing with 17 mm sec. Sound pressure Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pc. Iedpfx Aehyc Nwsg Ueau Operating pressure max. 280 bar Pressing pressure build-up time 2-3 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 150 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24V DC Frequency 50 Hz Connection hydraulics Main motor IE3 30 kW Total connection Approx. 35 kW

Condition: new, Year of construction: 2018, pressing force: 200 t, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Iasdpfx Agsfxykle Uou Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

Condition: new, Year of construction: 2019, pressing force: 400 t, pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Isdpfx Agjd Ttydo Ujau Return Speed:19 mm/sec :67 Lt./min. Total weight, approx.:26 t

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Iajdsfxygwepfx Ag Ueu Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, pressing force: 300 t, 300 T Portal Straightening Press – Portal Press – 3,500 × 2,000 mm Table, 1,000 mm Open Height The machine shown here has already been built and delivered to a customer as a custom order. We can manufacture this machine for you again on short notice – and are happy to accommodate individual options. This is a hydraulic portal press with 300 t pressing force, designed for straightening, assembly, and machining processes on large-format components. Base price: €142,000 net Options (on request): The listed options are based on completed customer projects and enable targeted adaptation of the machine to the specific application. The base machine is a functional standard version – in practice, it is usually expanded with additional features and configured to project requirements. - Table plate with T-slots according to DIN 650 - 75 mm table plate - Servo-hydraulics (energy-efficient operation) - SIEMENS S7-1200 control with 7" touch panel - Wireless remote control (with or without display) - Air/oil heat exchanger - Ejector system in the table (various configurations possible) ===== Technical Data & Information: ==== General Information Design: Portal press Pressing force: 300 t (adjustable) Total weight: approx. 10,500 kg Overall dimensions (W × D × H): 3,285 × 3,520 × 3,500 mm ==== Working Area Table size: 3,500 × 2,000 mm Open height: 1,000 mm Frame clearance: 2,100 mm ==== Table & Ram Table height: 750 mm (without table plate) Ram stroke: 0–400 mm (adjustable) Extensions: 200 / 400 / 600 mm Cylinder diameter: Ø 310 mm Piston rod: Ø 220 mm Transverse cylinder travel: ±900 mm Longitudinal portal travel: 3,000 mm ==== Speeds Idle speed: 10 mm/s Return speed: 50 mm/s Portal travel speed: max. 33 mm/s ==== Hydraulics & Drive Ijdpfsyxnzyjx Ag Ujau Pump capacity: 70 l/min Main motor: 7.5 kW Hydraulic tank: 200 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Standard operation: pendant control Optional: SIEMENS S7-1200 control Connection: 400 V / 50 Hz Total connected load: approx. 15 kW ==== Equipment - CE certification - Safety limit switches - Overload protection (electrical & hydraulic) - Cable drag chain system - Two-coat paint finish (RAL colors selectable) ===== Straightening of large steel structures, vehicle manufacturing, maintenance, assembly work, special constructions. Portal press, straightening press, hydraulic press, 300 ton press, large table press, metalworking Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured according to German Machinery Directives, European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with the Brazilian national safety standard NR 12, which builds on these standards. Our key strength is special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. For the hydraulics, we primarily use components from leading European manufacturers.

Condition: new, pressing force: 400 t, pressure:400 t distance between columns:3400 mm stroke:500 mm Iajdpfx Agjfhcc Re Usu total power requirement:55 kW weight of the machine ca.:49 t draw back pressure:26 t pump capacity:131 Lt./min dimensions:7.900 x 5.500 x 4.300 mm :5000 mm :2800 mm table height over floor:700 mm distance between table / ram:1000 mm :700 l traversing speed:0-33 mm/sec. down speed:0-10 mm/sec :0-25 mm/sec.

Condition: used, Year of construction: 2007, Travel distance: Isdpfxouu Dl Ro Ag Ueau X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Condition: excellent (used), Year of construction: 2014, functionality: limited functionality, X-axis: 400 mm Ijdpeyvtbyofx Ag Ueau Y-axis: 300 mm Z-axis: 220 mm The machine was in daily use until mid-April; however, the "automatic threading" function is not working.

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic Iaodpjvgbgaefx Ag Ueu 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm Iasdpfxoyvfy Ts Ag Ueu plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: used, Technical details: plate width: 800 mm coil weight: 12 t sheet width - max.: 800 mm sheet width - min.: 300 mm thickness of strip/band: max. 5,0 mm band speed: 4,5 / 25 m/min work height max.: 1700 mm Payload: 12,0 to (Coil) Weight approx.: 7,3 + 6,62 t dimensions of coil: 3,2 x 1,9 x 2,7 m dimension machine xH: 2,5 x 2,6 x 2,45 m Iedsu Ic Avjpfx Ag Ujau Decoiler with loading device Can optionally be sold together with stock no. 0100571. straightening unit: Infeed rollers: 2 x Ø 144 x 850mm Straightening rolls: 3 x bottom rolls, rigid, Ø 100 x 850mm, 30mm adjustable 3 x top rollers, Ø 110 x 850mm; 30 mm adjustable Coil unwinding machine: Outer Ø 1.500mm Strip width max. 800mm Load capacity max. 12 to Clamping Ø 470 - 630 / 570 - 730mm Transport unit LxWxH: 1700 x 1500 x 1000mm; crosswise running, with prism support 1000 x1000mm Machine will be offered and sold with Stock no. 0100521 as a decoiling and streightening line. *

Condition: used, Technical details: sheet width: 153 mm material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Iedpfx Ageu Ic Eke Usau Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg *

Condition: used, Technical details: pressure: 200 t Iaodpfx Ageu Nfrpo Usu stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. Ijdpsu Ic E Rjfx Ag Usau *

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min Isdpfx Agew Spa Ns Ueau rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Heavy-duty straightening and welding plate, steel and grey cast iron, heavily ribbed formerly a marking and measuring plate Iodpou Inwfjfx Ag Ueau heavy straightening plate length 2000 mm width 1000 mm thickness 160 mm working height 850 mm plate thickness approx. 35 mm throughout - 3 height-adjustable feet weight with feet 680 kg good condition

Condition: used, Electric hoist, crane, electric wire rope hoist, wire rope winch DEMAG type P 10 Serial no. 941 477 Year of construction 1962 Lifting capacity 2000 kg with 4 ropes Lifting height 5 meters Lifting speed 6 m/min. Fine lifting speed 1.3 m/min. Reeving 4/1 Motor power 0.6 / 2.6 kW Mains connection 380 Volt, 50 Hz - DEMAG hoist, type 19/11 K28P - Electric trolley DEMAG, type 13 / 6 K8 - 1 Travel speed approx. 19 m/min - Trolley for double T-beams, beam width 120 to 180 mm - Load hook for 4 load lines - Operating cylinder for the hoist with approx. 2.5 meter cable length Space requirement L x W x H 1400 x 900 x 500 mm Weight 350 kg Good condition Iaedpfxer E Ht Hj Ag Uju

Condition: used, Straightening and welding plate, cast steel and gray cast iron, heavily ribbed Cast plate, heavy straightening plate Length 1500 mm Width 1000 mm Thickness 100 mm Continuous plate thickness approx. 37 mm Table height 860 mm - Table base made of steel (custom-made) Iodperl U Swefx Ag Uoau Weight 640 kg Good condition

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line Ijdexw Rcuopfx Ag Uoau REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: good (used), Year of construction: 1960, Straightening and keyway slotting machines, manufacturer CARL HURTH, type: P5V, year approx. 1960. Modernized in 2018 with two-hand control. Clamping length: 1250 mm with various support dies up to 50 mm diameter. 4 dial gauge holders. Ready for use. The machine can also be used for keyway slotting. Dimensions: width 1500 mm, depth 1300 mm, height 2400 mm, weight approx. 2000 kg. Iaedpfxsy Rgk Ro Ag Uou

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke Iedjif Sg Sopfx Ag Ueau - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: repair required (used), functionality: unexamined, conveyor belt thickness: 8 mm, number of straightening rollers: 9, conveyor belt width: 2,200 mm, roller diameter: 95 mm, The leveler has been disassembled! Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm Iedpfszcm Dgsx Ag Ueau ENGLISH: Technical specifications of the RM2300/8/9 leveler Motor power: 22 kW / Leveler throughput width: 2300 mm Max. leveling width: 2200 mm / Number of leveling rollers: 9 / Leveling roller diameter: 95 mm Number of backup rollers: 22 / Lower backup rollers: 12 / Upper backup rollers: 10 Maximum sheet thickness to be leveled: 8 mm

Condition: used, Year of construction: 1974, machine/vehicle number: 00-0438-01, sheet width:100 - 500 mm coil weight:ca, 6 t coil internal dia.:400 - 500 mm coil external diameter:1500 mm sheet thickness - max.:0,8 - 3,5 mm feed length:max. 10 m Feed speed:max. 75 m/min. diameter of the mandrel:360 - 420, 460 - 520 mm stroke height:550 mm :7500 kp weight of the machine ca.:ukb, t dimensions of the machine ca.:ca, 3,4 x 1,7 x 2,5 m HHS Automatic Decoiler, Model - BA 1.3-050/20 Decoiler for extra wide metal sheet (500 mm width, sheet thickness from 0.8 to 3.5 mm), with hydraulic loading / supporting table, Hydraulic operated expandable Coil Mandrel with pnematic cooling ventilation. Seperate Power cabinet with Electrial Wire Diagrams and Instruction manuals avilable. Ijdpfx Agjh Ra Spj Ujau

Condition: used, Year of construction: 1985, machine/vehicle number: 30522, sheet width:120 mm coil weight:75 kg dimensions of the machine ca.:2,50 x 1,25 x 1,50 m Iaedpfx Ajcxxq Sog Uou

Condition: used, Year of construction: 1974, sheet width:130 mm coil internal dia.:300 - 500 mm Iajdecxxprepfx Ag Uju coil external diameter:1200 mm