Used Wmw Drill Machine for sale (461)

Condition: used, Single-Column - Eccentric Press AMBOLD Type PEEV 25.2 Machine No. 11734 / Year of manufacture: 20 Press force: 25 tons Throat depth: 200 mm Table size: 520 x 400 mm Ram area: 155 x 155 mm Through hole in table: 185 x 155 mm Stroke adjustment: 4–80 mm Ram adjustment distance: 40 mm Max. installation height: 270 mm (maximum stroke at BDC, table at lowest position) Clamping shank bore: Ø 32 mm Table height adjustment: approx. 150 mm Nwodotx E N Tspfx Ah Sen Ram strokes: 160 strokes/min Motor power: 2.2 kW Power supply: 400 Volt, 50 Hz - Pneumatic clutch-brake combination ORTLINGHAUS - Press safety valve HERION - Press control PILZ - Electric foot switch and two-hand control - Height-adjustable press table via 2 threaded spindles - Automatic central lubrication VOGEL - UVV according to VBG 7n 5.1 for manual loading - Free-standing control cabinet L x W x H = 600 x 310 x 1500 mm Required space L x W x H: 1450 x 1000 x 1850 mm Weight: 1.9 tons Very good condition

Condition: good (used), functionality: fully functional, total height: 2,700 mm, pressing force: 25 t, table width: 500 mm, table length: 500 mm, overall weight: 2,000 kg, distance table to ram: 800 mm, stroke length: 500 mm, Equipment: documentation/manual, Available for sale: 1 used hydraulic press Manufacturer: VEB Werkzeugfabrik Zeulenroda WMW Model: PYE25/1 Total weight: 2 t Njdpfxoxfzdle Ah Sown Nominal pressing force: 25 MP Ram stroke: 500 mm Maximum distance between table and ram: 800 mm Table: 500 x 500 mm Documentation included

Year of construction: 1989, condition: excellent (used), Type: EDU / 80 DR EK ICH FQW / FQS Q ApW/Q ApSS Number: 1824/1989 Admission: SK 50 Stop surface W x H: 480 x 460 mm Hole spacing W x H: 425 x 415 mm Gear wheel diameter inside / outside: 75 / 100 mm Speed range: 18 to 2,800 rpm Condition: very good Weight: 280 kg Dimensions: 560 x 410 x 1.000 mm Nsdjh Ar Tyopfx Ah Sjwn

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14023, travel distance X-axis: 1,140 mm, travel distance Y-axis: 910 mm, travel distance Z-axis: 875 mm, rapid traverse X-axis: 60 m/min, torque: 1,000 Nm, controller manufacturer: Siemens, controller model: 840 D, spindle speed (min.): 6,000 rpm, coolant supply: 60 bar, distance table center to spindle nose: 240 mm, Equipment: chip conveyor, documentation/manual, Siemens 840 D with network connection Renishaw measuring probe OMP60 SK50 DIN69871 – pull studs DIN69872 6000 rpm, 2 gearbox stages, max. torque 1000 Nm Nsdov Npm Hspfx Ah Sswn Tool chain magazine with 80 positions 2 pallets 800x800 mm, M16 hole grid Coolant high pressure through spindle 50 bar Knoll paper band filter and chip scraper conveyor Year of manufacture Dec. 1999 (max. single-shift operation)

Condition: used, total length: 5,400 mm, total width: 2,600 mm, total height: 2,550 mm, Empty weight: 15.000 kg Price: On request - Drive system: Conventional - Power [kW]: 55.0 - Centre height [mm]: 1000 - Swing over bed [mm]: 2000 - Distance between centres [mm]: 4000 - Spindle bore [mm]: 100 - Min. spindle speed [rpm]: 11.2 - Max. spindle speed [rpm]: 224 - Max. workpiece weight [kg]: 12500 - Options: Digital readout - Type of digital readout: Acu-Rite 3-A - Documentation available: No - Serial number: 261 511 706 - Transport dimensions: 5400mm x 2600mm x 2550mm (l x w x h) - Transport weight [kg]: 15000kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Nsdpfew Rfngsx Ah Sswn Lukas van Rossum

Year of construction: 1963, condition: ready for operation (used), An old WMW single-column eccentric press is available. Pressing force: 25Mp, torque: 25kpm, shear area: 630mm², max. sheet thickness: 3.2mm, working capacity: 50kpm, pass-through sheet thickness: 1.6mm, working capacity: 25kpm, ram stroke: 5mm-60mm, max. table-to-ram distance: 400mm, stroke rate: 112 strokes/min, machine weight: approx. 1300kg. An on-site inspection is possible. Nodpfxexghpds Ah Sswn

Condition: used, Vertical milling head, milling head, angle milling head WMW HECKERT Year of manufacture: approx. 1985 Tool holder: SK 40 Nwedpfxoxcbp Aj Ah Son Quill stroke: approx. 85 mm Centre diameter at the flange plate: 200 mm Bolt circle diameter at the flange plate: Ø 175 mm Mounting threads at the flange plate: 4x M16 - Head drive with splined shaft - SK40 adapter for head drive via splined shaft - Degree scale on the angle milling head 2x 90° - Draw bolt for tool holder with M16 - Solid intermediate flange for adapting to a WMW FW 250x1000 milling machine Dimensions L x W x H: 530 x 380 x 240 mm Total weight: 95 kg In good condition

Condition: good (used), functionality: fully functional, total height: 2,950 mm, throat depth: 360 mm, pressing force: 100 t, table width: 560 mm, table length: 750 mm, overall weight: 5,000 kg, distance table to ram: 630 mm, Equipment: documentation/manual, For sale: 1 used hydraulic press Manufacturer: VEB WEMA Zeulenroda WMW Model: PYE100SS Nwodpfx Aexfzc Ish Son Total weight: 5 t Nominal pressing force: 100 MP Ram stroke: 500 mm Maximum distance between table and ram: 630 mm Table: 750 x 560 mm Two-hand operation and closed hydraulic system

Condition: good (used), fixed center, fixed live center, fixed morse taper, fixed center, center -Manufacturer: WMW ABW, fixed center with mounting hole -Intake: Morse taper MK5 -Bore: Ø 8 mm -Number: 2x centering tips available -Price per piece -Dimensions: Ø 46/200 mm -Weight: 1.9 kg/pc. Nodpfji Hmnlox Ah Sswn

Year of construction: 1982, condition: good (used), machine/vehicle number: 82-540, Offer 18474 Technical data: - Flat steel shears cuts flat up to 100 x 18 mm - blade length approx. 250 mm - Profile steel shear cuts angles Nwjdjg Eubnspfx Ah Sen - 90° up to 100 x 10 mm - 45° up to 70 x 8 mm - Bar steel shears cut round steel 90° up to 36 mm - square steel 90° up to 30 mm - Notching device sheets up to 8 mm - Hole punching machine - pressure capacity approx. 50 t - throat 350 mm - punches in steel up to 20 mm Ø in 15 mm - drive 400 V / 3 kW - space requirement approx. W 1100 x H 1700 x D 2300 mm - weight approx. 1900 kg

Condition: used, total height: 1,800 mm, total length: 3,500 mm, total width: 2,300 mm, Empty weight: 5.800 kg Nsdjwya A Sspfx Ah Sjwn Price: On request Grinding diameter: 315mm Grinding depth: 500mm Swing: 500/600mm Stroke of table: 800mm - Documentation available: No - Serial number: 31577 - Control: Conventional - Model: inderslijper intern - Travel X: 500mm - Grinding diameter: 600mm - Transport dimensions: 3500mm x 2300mm x 1800mm (l x w x h) - Transport weight [kg]: 5800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 18049, Controller: Siemens 840 x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Table: 400 x 400 mm Spindle speed 10.000 rpm Rapid traverse 30 m/min Number of pallets 8 Change time of pallets 8 sec Power capacity 35 /24 kW Total power requirement 65 kW Tool changer SK 40 Machine weight: 13.000 kg Machine dimensions: 4730 x 3252 x 2650 mm Nwodewn Exzopfx Ah Sjn

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Hand crank with indexing plate and scissors - Scale ring for reading at the crank - Readable degree scale on the rotary table Njdpfjxcbpisx Ah Sewn - Swing-out worm for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table plate - Universal joint drive - Built-in indexing plate: 17-25-30-39-47-57 - Rotary table drive suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E - Dividing head (indexing plate = 20) suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: ready for operation (used), Year of construction: 1961, Manufacturer: WMW NILES lathe DLZ 630 Condition: used Turning diameter over bed: 630 mm Feed: quer: 0,018-1,25 mm/U Hollow: 70 mm Centre height: 290 mm Spindle speed: 22,5 – 1120 / 18 step U/min Nododwfdfopfx Ah Sown Turning length: 2000 mm Total power requirement: 15,0 kW Turning diameter over bed: 630 mm Weight of the machine ca.: 4,2 t Transport dimensions lxwxh: 4,5×1,35×1,5 m Turning diameter over slide: 340 mm If you need more information. We are here to help! Please contact us via the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 1971, turning diameter over bed 800 mm turning diameter over slide rest 480 mm turning length 3000 mm turning diameter in the slot 850 mm center height over bed 380 mm bed width 550 mm spindle head DIN 55022/8 spindle bore 73 mm speeds 18 - 900 U/min feeds 224 / 0,018-10 mm/U thread - mm pitch ca. 84: 0,2 - 224 mm total power requirement 17,5 kW weight of the machine ca. 8,6 t dimensions of the machine ca. 5,5 x 1,8 x 1,72 m Solid universal lathe with rapid longitudinal and transverse support traverse, pole-changing spindle motor (i.e., two speeds can be selected by increasing the motor speed), single-lever control for all support movements, pre-selected feed rates, hardened bed guides, double-tiebar bed for high rigidity, high- positioned front guideway and low-positioned rear guideway in the V-prism for Nwodpfx Ajwwatrjh Son high accuracy, and triple bearings for the lathe spindle, threads in mm, inches and diametrical pitch. The year of manufacture is estimated. Many accessories! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1959, machine/vehicle number: 1727, Offer 24177 Technical data: - Center height 180 mm - Center distance 1000 mm - Larger swing – Ø over bed 355 mm - Over cross slide approx. 200 mm - Spindle bore 36 mm - Taper of tailstock quill MK 5 - Travel of tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm - Feeds - Travel of cross slide approx. 200 mm - Travel of top slide approx. 115 mm Nsdpov Hckgofx Ah Sown - Drive 400 V / 5.8 kW - With: - Tailstock, 3-jaw chuck, steady rest - Steel holder, live center, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Condition: new, TyP / Model: for WMW drilling machine Total length: 1.140 mm Diameter rod area: 50 mm Length of the pick-up sleeve: 190 mm Diameter sleeve: 78 mm Mounting: MK 5 Condition: obviously unused Weight: Dimensions: 1,140 x 78 mm Nwedpfx Ajbptmdsh Sen

Year of construction: 1988, condition: used, centre height 140 mm chucking diameter 250 mm swivelling range 90 Grad weight of the machine ca. 150 kg Njdpfx Ahjipyx To Sown Dividing head swivable of a Heckert FU 400

Condition: ready for operation (used), Nominal force: 2500kN, operating pressure: 20MPa, ram speed down/up: 210/110mm/s, ram stroke: 500mm, throat depth: 360mm, max. distance between table and ram: 800mm, rated current: 41A, control voltage: 60V, rated voltage: 380V, connected load: 20.5kW, weight: 8t. An on-site inspection is possible. Nodpfexcx Aajx Ah Sswn

Condition: good (used), Year of construction: 1954, machine/vehicle number: 1749, Offer 24178 Technical data: Nodpfxetiym Ro Ah Sewn - Center height 250 mm - Center width 2000 mm - larger circulation - Ø over bed 490 mm - over cross slide approx. 300 mm - Spindle bore 72 mm - Taper of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm - Feed rates - Travel of the cross slide 200 mm - Travel of the top slide 115 mm - Drive 380 V / 5.5 kW - with: - tailstock, 3-jaw chuck, steady rest - Steel holder, rotating center point, - chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg

Condition: good (used), TGL: 28561/01 Table number: 14167 diameter: 315 mm footprint: 380 x 600 mm Height: 150 mm Nwodpfx Aemikdheh Sjn Accessories/equipment: graduation on table 360°, rotatable Condition: good weight: 75 kg dimensions: 600 x 600 x 320 mm dimensions with frame: 700 x 700 x 1.500 mm

Year of construction: 1988, condition: used, tool adaptor SK 40 weight 165 kg Type Uni. 0 Nwedpfx Aheipyx Es Ssn Universal type milling head with SK 40 spindle of a milling machine Heckert FU 315.

Year of construction: 1966, condition: good (used), Machine number: 6665/66 TyP / Model: PEDV 10/II-S Pressing force: 10 t table: 450 x 300 mm ram: 190 x 140 mm ram stroke: 6 to 50 mm ram adjustment downwards: 45 mm table adjustment upwards: 140 mm drop-through hole: 140 mm throat: 170 mm distance table ram max.: 320 mm stroke rate: 160 /min Nwodpfoh Tktijx Ah Sen sheet thickness single stroke: 2 mm sheet thickness continuous stroke: 1 mm power supply: 1,2 kW Accessories/equipment: Condition: good weight: 1,0 t dimensions: 900 x 850 x 2.200 mm

Year of construction: 1988, condition: used, table diameter 400 mm Nsdpfxeipyx Nj Ah Sswn table load 0,126 t table height 100 mm weight 126 kg Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Year of construction: 1988, condition: used, diameter different mm weight 200 kg Type different 0 Nedpfx Ajipyybjh Sswn 14 pieces arbors for milling tools and 4 steadies, 2 for FU 400 (84 mm hole dia.), 1 for FU 315 (70 mm hole dia.) and one small one (35 mm hole dia.).