Used Wood Combustion for sale (6,230)

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Crodpfx Ajyh Hn Hec Nsb Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: used, Year of construction: 1981, machine/vehicle number: 2383, table size: 630 x 500 mm saw blade diameter: max. 250 mm curring height: 77 mm Cedpfjb H Infex Ac Norb saw blade rotations: 6300 rpm electric drive: 380 V, 2,2 kW space needed: 800 x 680 x 840 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, overall weight: 1,100 kg, total length: 6,200 mm, total width: 1,000 mm, total height: 1,900 mm, loading space length: 4,500 mm, loading space width: 800 mm, loading space height: 600 mm, tank capacity: 2,100 l, KIT 250 For joiners, carpenters, musical instrument manufacturers, woodturning shops with 1.5 - 2.5 cubic meters of wood stacking space and a stack width of 0.80 m - 1.00 m. The energy-saving system works according to the principle of conventional drying with a supply air flap and an exhaust air flap. an exhaust air flap. The vacuum pump is used for rapid dehumidification. Crodpotqlp Rjfx Ac Njb

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,850 kg, total length: 6,000 mm, total width: 1,700 mm, total height: 1,900 mm, loading space length: 5,300 mm, loading space width: 900 mm, loading space height: 1,100 mm, energy consumption: 3 kWh, tank capacity: 5,200 l, Test dryer EUROVAC vacuum dryer KVT 550 For further information please contact us. Crsdotqlqaopfx Ac Neb

Condition: good (used), Year of construction: 1995, Slow-speed machine with moving floor, 60 cm rotor width, 18.5 kW motor, fitted with new rotor bearings. Crsdoy D Alkopfx Ac Nsb

Condition: good (used), Year of construction: 2013, Wood chip boiler for steam up to 150 degrees or for water only with hydraulic feed system maximum thermal output up to 850 kW Cedpfx Acsy Dfd Ne Norb suitable for dry material

Condition: good (used), Year of construction: 2006, Slow-speed machine with large rotor, 40 knives on rotor. Rotor width: 800 mm. Rotor diameter: 368 mm. Motor: 22 kW. The following parts have been renewed: rotor bearings, all bearings in the gearbox, new screen with 25 / 20 perforation, knives, V-belts. Crsdpfxjxqq A Io Ac Nob

Condition: good (used), Year of construction: 2010, functioning wood gasification plant with 40 kw electric power and 80 kw heat output Cjdpfsiggpbjx Ac Norb

Condition: good (used), Year of construction: 1994, functionality: fully functional, power: 75 kW (101.97 HP), Low-speed rotor with push floor Rotor width 2500 mm Rotor diameter approx. 400 mm Crodetgqlyjpfx Ac Nob Motor 75 kw Discharge via conveyor belt with magnetic roller

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm 22 kw motor Csdpfjt Tvk Asx Ac Nsrb with discharge auger

Condition: good (used), Year of construction: 1992, Chipper with hydraulic walking floor Rotor width 700 mm Motor 11 kW Screen with 16 mm perforation No PLC installed yet Partially overhauled New rotor bearings Credpfx Acowv Hmvs Nob

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system 60 kW heating capacity Crjdpfx Acsw Rpdrs Neb year of manufacture 2014 without discharge unit (can be provided if needed)

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Crodpfx Acsyalbls Neb

Condition: used, Year of construction: 1995, functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 5,200 kg, Large chipper, ideal for pallets or similar. Built like a tank, weighs 5 tons. Rotor width 1300 mm. Motor 37 kW. Cedou Apkiopfx Ac Nerb Travel to rotor approx. 1.3 m. With discharge screw.

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal feed Codpfx Aou Ezp Ajc Njrb max. feed width: 300 mm max. feed height: 85 mm motor: 18.5 kW new rotor bearing

Condition: excellent (used), Year of construction: 2020, Powerful hacker or shredder with 45 kW motor, also suitable for plastic. Rotor width: 1000 mm, rotor diameter: 360 mm, approximately 50–60 blades on the rotor. Inclined conveyor belt with magnetic roller available separately. Cjdpfxow Tdudo Ac Nerb

Condition: good (used), Year of construction: 1999, Chipper with inclined feed, suitable for roofers and carpenters, ideal for shredding roof battens with nails. Cjdexlm Ntepfx Ac Nsrb Max. feed opening: 400 x 80 mm Slow speed: 250 rpm Motor: 18.5 kW Large rotor diameter Large knives 40 x 40 mm, set diagonally

Condition: good (used), Year of construction: 2010, Wood gasification system for electricity generation, approx. 50 kW, installed in a 20-foot container. Storage tank approx. 3.5 m in length. Material feed via inclined chain conveyor. Gas engine not included, but can be sourced used or new. Crsdpeyxv Emefx Ac Neb

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor Crodpep H Sv Djfx Ac Nsb 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Max. feed width: 320 mm Crjdsxc H Rlspfx Ac Njb Max. feed height: 80 mm With conveyor belt

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Codpfou Rl Ruex Ac Nsrb Motor 75 kw with frequency converter for variable speed no vibrating chute included

Year of construction: 2025, condition: new, Resaw Horizontal - VIKI 750-80: Saw wheel diameter: 800mm Band saw width: 80mm Max. sawing width: 700mm Max. sawing height: 450mm Crodpfx Ajyz Srhjc Njb Min. sawing height: 0,5mm Feeding speed: 0,1 - 20 Meter/minute Motor power: 22kW Feeding Motor: 1,5kW Dimensions: 2500x2700x2200mm Machine weight: 2000kg Blade tension: Hydraulic Digital control sawing thickness setting Optional Extras: - Automatic Forward and Reverse Feed - Double Pressrolls - 22kW Frequency converter in separate stand pult

Condition: used, axle configuration: 3 axles, first registration: 11/2005, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 385/65R22,5, color: other, Year of construction: 2005, Equipment: ABS, = Additional Options and Accessories = - EBS = Remarks = Number of axles: 3, Unladen weight: 7,580 kg, Gross weight: 39,000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Full air suspension, ABS, EBS, Year of body construction: 2005, Sliding roof, Axle type: BPW = Further Information = General Information Cabin: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle configuration Tyre size: 385/65R22.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Tyre tread left: 6 mm; Tyre tread right: 9 mm Axle 2: Tyre tread left: 5 mm; Tyre tread right: 6 mm Axle 3: Tyre tread left: 7 mm; Tyre tread right: 8 mm Weights Unladen weight: 7,580 kg Payload capacity: 31,420 kg Gross vehicle weight (GVW): 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Maintenance APK (Dutch MOT-equivalent): valid until 09.2026 Condition Overall condition: average Credpfex S Uzaex Ac Nob Technical condition: average Visual condition: average Damages: none = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our inventory covers all European makes, model years, and price ranges. Why buy at Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Competitive pricing • Professional business practices • Multilingual staff • Customer-focused service • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The safety of “recognizable quality” • And much more.... Visit our website for special offers and the complete inventory: Leasing via Kleyn Trucks is possible in most European countries! Calculate your lease rate quickly and send us a request via our website. Ask directly about our European warranty package.

Condition: used, heavy-duty copy lathe, used, in good condition, with extensive accessories, including disc grinding attachment. Manufacturer MVM, model T1500. Centre distance approx. 1450 mm, centre height approx. 220 mm. Manual copying device. 8 speeds 700 – 3100 rpm, stepless. Motor 2.5 kW. Space required approx. 2700 x 800 x 1500 mm. Weight approx. 500 kg. Location: 97447 Gerolzhofen, loaded free, unpacked. Delivery in as-inspected condition, without guarantee or warranty. Crjdoy Ay A Rjpfx Ac Nob

Condition: good (used), Year of construction: 1993, Offered for sale is a used Zeno drum chipper, year of manufacture 1993. Type 1400x1600 mm. 97L-4538. Main motor: 75 kW, 1500 rpm. Hydraulic motor: 4 kW. Includes spare gearbox. Crsdoyznahopfx Ac Njb