Used Wood Hog for sale (6,426)

Condition: new, Wood chipper BX 62 R Bjdpfxjx S Uh Ho Abdscw Condition: New

Condition: used, New: Yes Bcodpfxjx S I Ige Abdew Colour: Green

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 48 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Bsdpfx Abov Dvfrodecw Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Bedpfx Abev Dvhyedecw Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, power: 50 kW (67.98 HP), type of input current: AC, pressure: 3 bar, input voltage: 230 V, nominal heat output: 50 kW (67.98 HP), heating capacity: 50 kW (67.98 HP), temperature: 95 °C, tank capacity: 175 l, operating pressure: 3 bar, Equipment: type plate available, We are offering this used Guntamatic BMK 50 log wood gasification boiler, year of manufacture 2012. It is suitable for logs up to 50 cm in length. Included are 2 insulated buffer tanks from Guntamatic (1,600 liters each), pipework with mixing valve, and a Kroll heating blower. Type: BMK 50 with automatic ignition Article number: 066-100 Serial number: 315972 Bcjdpfsyf U R Hex Abdsw Year of manufacture: 2012 Rated output: 20-50 kW Boiler class: 3 Electrical connection: 230 V Electrical current: 13 A Permissible operating pressure: 3 bar Maximum operating temperature: 95 °C Chimney draught: 0.2 mbar Water volume: 175 l Fuel: log wood 1/2 m, natural The system has only been in operation for 4 weeks. Includes 2 insulated buffer storage tanks (1,600 l each) and one Kroll blower. The unit is in excellent, as-new condition and can be inspected in operation. Disassembly and transport are at the buyer's expense. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Drum chipper for production of cellulose chips or fuel chips. The chipper is feeded from a vibro conveyor and feeding bin. Bodpfxsyh Umws Abdjcw Included is also Bruks chip screen type Bruks BS3. Electrical motor 75 kW. Capacity up to 60 m3 ready made chips per hour. Infeed opening , width 540 mm, height 300 mm

Year of construction: 1992, operating hours: 47,000 h, condition: used, We offer this used Baljer & Zembrod OB/30V-R.D. machine, year of manufacture 1992. Manufacturer: Baljer & Zembrod Model: OB/30V-R.D. Bcodpfx Asynwhtebdjw Year of manufacture: 1992 Condition: used Category ID: 1382 type of crane: OB maximum reach: 13.2 m lifting capacity at maximum outreach: 1,800 kg with grapple operator cabin power cable wound on drum For any questions or to receive additional information, please send us a message or contact us by phone.

Condition: used, Stack cutting machine, guillotine cutter, guillotine SCHNEIDER Type Senator 155 Rubber, paper and veneer shear, plastic shear, fabric shear Guillotine for paper, cardboard, rubber, wood, and veneer Paper shear, rubber shear, plastic shear, paper and veneer shear Machine no. 60178 Year of manufacture: 1968 Cutting length: 1550 mm Cutting height: approx. 125 mm Working height: 140 mm Back gauge: max. 1550 mm Motor power (blade drive): 5.5 kW Power supply: 380 Volt, 50 Hz Bjdedzqnyepfx Abdecw - Two-hand operation for blade activation - Automatic pressing device holds the paper stack on the table - Manual clamp and blade activation via foot switch (operational) - Back gauge adjustment up to 1550 mm (can be adjusted manually via handwheel) - Retrofitted electric control not functional, without wiring diagrams, without user manual - Back gauge adjustment via servo motor (servo motor, controller, and control present, not functioning) Required space (L x W x H): 325 x 270 x 165 cm Space requirement for transport without disassembly: Length 330 cm x Width 270 cm x Height 175 cm Space requirement for transport with disassembly: Length 550 cm x Width 220 cm x Height 175 cm (machine + table separately) Machine dimensions: Length 270 cm x Width 190 cm x Height 175 cm Back gauge table: Length 240 cm x Width 170 cm x Height 120 cm Weight of assembled machine: approx. 5000 kg (without transport steel plate) Good condition Ideal for cutting paper, cardboard, leather, cork, rubber, or fabric-reinforced rubber Sales price does not include the 20 mm steel plate on which the machine is placed in storage. (Price for the steel plate: EUR 900 net)

Condition: used, dimensions: 9.15 m x 2 m x 2.95 m Bsdoyi Hynopfx Abdecw

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator Bcodpoyhzhzefx Abdow - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Bcodpfoyhzhusx Abdew Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, functionality: fully functional, Aluminum Z-conveyor belt with base frame, including adjustable feet and freely swiveling transport castors with parking brakes. Horizontal section: 800 mm Inclined section: 3,000 mm Second inclined section: 1,200 mm Angle of incline at each bend: 60° Total conveyor belt length measured on the floor: 3,500 mm Height of the horizontal section: 400 mm Design: - Aluminum construction with 2x reinforced profile, 90x45 mm - Full-surface discharge sheet, 2.0 mm, galvanized - Drive roller and deflection roller made from welded and machined S235 steel - Ø100x720 mm crowned turning, shaft fixed with pillow block bearings Drive: Parallel shaft geared motor 1.10 kW, belt speed: 0.53 m/sec Connection: 230/400V, 50 Hz, protection class IP54 Drive wired ready for connection up to the motor junction box (commissioning must be performed by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU, including wave edge PU, petrol matt finish, AS, especially cross-rigid with hard cover Conveyor belt width: 700 mm 2 pcs. wave edges, 50 mm high, 25 mm wide, high-frequency welded 34 pcs. T40 cleats, centered, 430 mm long, spacing approx. 299 mm Belt material: 2-ply, especially cross-stable At each bend, the belt is guided on both sides with 3 hold-down rollers each. The belt is manufactured with a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 500 mm, determined as follows: (top view) Cross-section 70+25+5+500+5+25+70 mm Belt guidance via PVC V-guide on the running surface, profile 10x6 mm - Includes cut-out in the discharge sheet - Includes slide bushings in the drive and deflection rollers Bodpfxjyhzhnj Abdecw

Condition: good (used), For sale: Wood processing line: - FOD DTRA 63 bottom-driven frame saw - 2 units - Log infeed conveyors - cross and longitudinal - Conveyors - Trolleys Bcsdoyhzhhjpfx Abdew - Rails Machines are operational and in working condition Basic technical data for the FOD sawmill: Horizontal clearance mm 650 Saw frame stroke mm 520 Clearance between rollers mm 80-570 Minimum log diameter mm 100 Maximum log diameter mm 550 Minimum log length mm 2200 Main shaft rotation speed rpm 300 Feed per main shaft revolution mm/1 rev. 4 - 30 Maximum number of saw blades pcs. 12 Main motor power kW 45 Feed motor power kW 4 Hydraulic unit motor power kW 2.2

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible Bodpfsh Eiw Iox Abdscw can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Bcodeh Hnp Dspfx Abdjw Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Bedpfepdqzxsx Abdocw Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Single-shaft shredder HOKUTech special offer model H600 Compact, robust, high throughput The H600 high-performance shredder with its flexible application options can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into chips and achieves an enormous reduction in the volume of bulky materials. The hydraulically controlled pusher feeds the wood waste to be shredded into the cutting area of the rotor and is controlled automatically and load-dependent. The high-performance solid steel electric rotor has a diameter of 252 mm and operates at a rotor speed of 85-95 rpm. The concave-ground, aggressive and 4-way rotating knives / reversible cutting crowns are located in milled knife pockets on special knife carriers. This highly efficient system guarantees high throughput, low energy consumption and optimum discharge of the shredded material by reducing the cutting gap between the counter blade and the rotor. Chip size (10 - 60 mm) Technical data: - Hopper opening - Hopper capacity Bsdjutmw Hepfx Abdjcw - Working width of the rotor - Diameter of the rotor - Drive power - Rotor speed 600 x 800 mm 0.6 m3 600 mm 252 mm 15 kW 90 rpm Location: Comes to stock 54634 Bitburg - available by arrangement -

Condition: excellent (used), Year of construction: 2003, CNC UNICA Wood production year 2003, Uniteam brand since 2016 belongs to Biesse Machine in good working condition, very fast working in x - y - z axis , ideal for milling in wood , MDF, laminated panels Max. useful working area (X-Y-Z) mm 3440 x 1300 x 200 mm Vertical electrospindle motor power 9 kW Bjdpfjwk Ekcjx Abdjcw Machine size 5000 x 2350 x 2200 mm Weight 4000 kg

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit Bcsdob D I Awjpfx Abdow -Outer diameter: 125 mm -Height: 40 mm -Hole: Ø 30 mm -Quantity: 1 milling cutter -Price: complete -Weight: 2.2 kg

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74 Bedpjya Ik Asfx Abdjcw

Condition: excellent (used), CATALOG NUMBER 7611 Technical specifications: - Inlet dimensions: 460x180mm - Outlet diameter: 300mm - Shaft width: 550mm - Shaft diameter: 350mm - Number of knives: 10 pcs - Knives arranged in 2 rows - Autoreverse function - Knife setting device - Sieve diameter: 30mm - Feeding conveyor from top and bottom - Bottom pull shaft - Feeding conveyor length: 4400mm - Main motor: 37kW - Upper feed motor: 1.5kW - Lower feed motor: 2.2kW - Dimensions (L/W/H): 6100x1150x1000mm - Weight approx: 3500kg ADVANTAGES – German-made – Autoreverse function – Feeding conveyor from top and bottom Bcedjydc Rljpfx Abdew – Knife setting device – Very good condition – Used shredder Net price: 98,900 PLN Net price: 23,550 EUR Net price calculated at 4.2 PLN/EUR (Price may change with significant currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 7032 TECHNICAL SPECIFICATIONS - loading chute inlet: 1050x610mm - shredded wood outlet: Ø160mm - rotor working width: 580mm - main motor: 18.5kW - pump motor: 0.75kW - number of knives: 14 pcs - knife dimensions: 30x30mm - screen: 15mm x 20mm - pressure drawer - electric autoreverse - dimensions (L/W/H): 2000x1130x1530mm - weight: 970kg ADVANTAGES – German-made – autoreverse Bcodpfxeydc Nhe Abdjw – pressure drawer – very good condition – used chipper Net price: PLN 47,900 Net price: EUR 11,400 Net price converted at exchange rate 4.2 PLN/EUR (in case of significant exchange rate fluctuations, the price may change)

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator Bcsdpfx Abox Up Nwjdsw -Operates on wood and gas -Sold with gas burner -With mechanical control -Voltage: 400V

Condition: good (used), Wood router bit, router head, router tool, wood router bit, profile router bit -Hole: Ø 40 mm -Outer diameter: 180/220 mm -Reversible inserts -Tool No.: Bsdpjb A Hhnjfx Abdscw -Tool No.: 121212 Y22 -Tool No.: Number: 13 milling cutters Price: complete -Weight: 150 kg

Condition: good (used), Year of construction: 2018, Slow-speed single-shaft shredder for various types of wood waste, including soft and hard dimensional wood in block or offcut form, waste from all types of wood-based panels, pallet and board waste with nails, as well as other forms of wood whose size does not exceed the dimensions of the machine's inlet. Bedpsymx Ufjfx Abdjcw Basic information: Material to shred: wet sawmill waste Additional equipment: - segmented floor and ram surface (four-sided) - "fast hydraulic" system - ram comb - K-type insulated bearings - additional row of cutting knives on the rotor - screw chip conveyor (1200EU) - logspacer - additional outputs in the control cabinet for managing discharge belt conveyors