Used Wood Turning Lathe for sale (15,573)

Condition: used, Year of construction: 1995, turning diameter over bed 50 mm Pjdpfot Hwp Tjx Am Tspw spindle passage 26 mm turning length 275 mm total power requirement 12 kW weight of the machine ca. 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock

Condition: good (used), Year of construction: 2018, functionality: fully functional, The equipment is as shown in the pictures. All tools visible in the pictures are included. Ppodpex Na Slsfx Am Tow

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, Ppedpezlc Apjfx Am Tjw max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Pedpfezlcz Eox Am Tepw Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories.

Condition: good (used), machine/vehicle number: T61599, TORNOS DECO 10, serial number T61599, 9-axis, equipped with a TORNOS ROBOBAR automatic bar feeder, additional tray, lathe cleaned and in working order. Ppodpfxezk Ug Dj Am Tsw

Condition: used, Year of construction: 2019, Technical details: bar material dia.: 38 mm turning length: 350 mm turning speeds: 7.000 / 7.000 U/min number of tools: 30 (3 x 10) driven tools: ja / yes control: FANUC 31i-B5 rapid traverse: 30 m/min total power requirement: 10,5 kVA weight of the machine ca.: 6,5 t dimensions of the machine ca.: 2,50 x 1,45 x 1,75 plus Lademagazin m work piece power: 4 kW toolpiece turning speed range: 5.700 1/min Accerories main spindle power 11 kW sub spindle power 7,5 kW CNC sliding headstock machine STAR ST 38, Psdemu Rtujpfx Am Tepw 3 turrets, 12 CNC Axis (X1/Z1/Y1/C1/X2/Z2/Y2/YA2/C2/X3/Z3/Y3, Fireextinguisher KRAFT und BAUER FB 703, partscatcher and conveyor belt (for long parts), LTA oilmist suction, chiller for oil, machining with oil as coolant, reading hours: approx. 14.500 hours "machine on", approx. 4.100 hours "machining" *

Condition: used, Year of construction: 2023, operating hours: 3,700 h, functionality: unexamined, machine/vehicle number: 22260005, travel distance X-axis: 255 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 382 mm, Equipment: documentation/manual, CNC lathe SCHUSTER VD20 with automation and peripherals Technical data Working area Maximum turning diameter: 250 mm Maximum turning length: 250 mm Number of spindles: 2 Number of tool positions: 12 Control system: SIEMENS Sinumerik 840D SL Year of manufacture: 2023 Serial number: 22260005 Recorded operating hours: 3,635 Electrical connection: 3P~ / N / PE (TN-C-S system) Frequency: 50 Hz Operating voltage: 400 V Control voltage: 24 V DC Total weight: approx. 14,000 kg Travel distances / feeds Z-axis: Travel distance 370 mm, rapid traverse 50 m/min, maximum acceleration 8 m/s², feed force 9,000 N X-axis: Travel distance 250 mm, rapid traverse 30 m/min, maximum acceleration 8 m/s², feed force 9,000 N Y-axis (optional): Travel distance ±40 mm, rapid traverse 15 m/min, maximum acceleration 5 m/s², feed force 15,000 N Podpezdtqnofx Am Tepw Turning spindles Maximum speed: up to 4,500 rpm Nominal speed: 2,500 rpm Spindle nose: DIN 55026-A6 Internal diameter of spindle bearing: Ø120 mm Spindle power (100% duty cycle, S1): 26 kW Spindle torque (100% duty cycle): 100 Nm Equipment / Features The system includes a KUKA handheld control unit, a KNOLL chip conveyor type 280 S-1/160, a DELTATHERM cooling unit type RKV 5.5, a KUKA handling robot of the Industrial Robot Cybertec-2 Series with a corresponding KUKA robot controller type KR C5 Dualcap AC, a KNOLL coolant filter unit type KF 150/950, and an air filter unit type AFS 1100.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2760174, (Please provide us with your offer price.) Several units are available and are part of a process chain. Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Ppjdoyiarujpfx Am Tjw All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Pjdpjw Dufiefx Am Topw *

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Podpfx Aezgczbsm Tspw Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: used, Make: Doosan Model: Puma V-550M CNC Vertical Lathe Year: 2012 Max. cutting diameter: 800 mm Max. cutting height: 750 mm 2,000 rpm 22/30 kW motor 12-position turret 380 mm 4-jaw manual chuck 1 angular milling holder Ppodpfxezh D Tuo Am Tsw Chip conveyor Fanuc 32iA control

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Control system: SIEMENS 840D Turning diameter: 2,800 mm Turning height: 1,000 mm Load capacity: 16,000 kg Max. swing diameter, approx.: 2,800 mm Turning diameter - external, max.: 2,800 mm Spindle speed: 63 rpm Podszfn Hyjpfx Am Topw Cross slide travel: 620 mm Ram stroke - max.: 690 mm Tool interface: CAPTO 6 Included: Chip conveyor 2 supports 4-position tool turret Hydraulic chuck

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, Control system: SIEMENS 840D Machining diameter: 4,000 mm Machining height: 1,400 mm Travel of the rotary table: 850 mm Max. swing diameter, approx.: 4,200 mm Turning diameter – external, max.: 4,000 mm Travel of the cross slide: 850 mm Ram stroke – max.: 950 mm Tool holder: CAPTO 6 Included: Chip conveyor 2 tailstocks Podpfxjzfn Evo Am Tepw 4-position tool turret Hydraulic chuck, 2,800 mm

Condition: refurbished (used), Year of construction: 2007, operating hours: 5,000 h, functionality: fully functional, Fully equipped machine IMECA BOSS 32 L edger Turning tool holder included 6 fully overhauled motorized tools New tool drive gearbox. Podpfozic Rujx Am Topw New Y-axis, motor, and ball screw. Clamping and guiding device provided with the machine New edger channel 380 V / 220 V transformer included

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system Podpfsx I Simjx Am Tepw - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Ppjdpsx Ik Tdsfx Am Tsw subject to prior sale!

Condition: excellent (used), Year of construction: 2015, workpiece weight (max.): 20,000 kg, spindle motor power: 90,000 W, spindle speed (max.): 75 rpm, turning diameter: 4,000 mm, turning height: 1,900 mm, New 2015. Purchased 2022 for a project was cancelled before commissioning was completed and the machine has not been used in any production after commissioning. Very full documentation is available upon request Main specification details. Turning diameter 3600mm. Maximum turning height 1900mm. Maximum table load 20,000kgs. Table speeds are infinitely variable between 14rpm and 75rpm. Table drive motor 90KW AC. Table torque to 61168NM. Z axis thrust 36000NM. X and Z axes traverse rates 1-5000mm/min. Ram is 320mm diameter Ppedjy Uxdkspfx Am Tew Price, ex works UK Midlands £330,000 VTT-WB can quote transport installation and commissioning

Condition: refurbished (used), Year of construction: 1998, functionality: fully functional, feed length Z-axis: 1,000 mm, workpiece weight (max.): 15,000 kg, spindle motor power: 37,500 W, spindle speed (max.): 415 rpm, turning diameter: 2,100 mm, turning height: 1,300 mm, workpiece diameter (max.): 2,100 mm, year of last overhaul: 2026, As with all Millenniums this machine has the wonderful base structure and table drive design that makes all the production wishes possible – the highest accuracy and the highest chip removal When this machine is delivered to the customer it will have been fully serviced and refurbished to ensure those qualities are ready for you to use turning, pcd drilling, rotary contour milling, angle drilling, grinding – see it all on the Millennium films on the website Ppodoy Uw Sgepfx Am Tsw Only the best machine tools are designed and built with this quality and strength

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance Z-axis: 1,500 mm, chuck outer diameter: 1,800 mm, spindle speed (max.): 315 rpm, turning diameter: 2,000 mm, turning height: 2,450 mm, rotational speed (max.): 3,000 rpm, year of last overhaul: 2026, FOR SALE – 12 MONTHS GUARANTEE – CE MARKED A DORRIES-SCHARMANN VCE2000/180MC-FC CONTUMAT Vertical Turning, Centre for high accuracy heavy cut turning, high precision heavy PCD drilling and continuous rotary milling Delivered in 2002. Condition: Excellent - see INTRO page CNC specification – high level Siemens 840D Hydrostatic crossrail and ram guideways. Cutting and positioning feed rates up to 18m/min A 9-STATION MAGAZINE is for turning toolheads & machining heads. These heads are picked up by the ram during cycle The turning and milling heads are fed by a KELCH DOUBLE GRIPPER TOOL CHANGER, as seen on most machining centres The tool changer collects the turning tools (CAPTO C8) and live spindle tools (SK50) from a WERO magazine The magazine as supplied with this machine originally has the capacity to hold 60 Capto C8 tools and 76 SK50 tools The KELCH toolchanger can change the tools in both vertical and horizontal working positions. This means, for example, that various SK50 tools can be fed into a right angle milling head while it remains on the ram MACHINE SALE POSSIBILITIES The machine specification will be finalized by the purchaser and VTT-WB New guarding will be supplied to match the final specification GUIDE PRICES A – machine without the pallet system but with the full tool changing and tool storage system. New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Tool storage capacity can be reduced within this price £525,000 B – machine without the pallet system and toolchanging and storage system replaced with 30 pocket disc type magazine New guarding. CE marking 12 months full warranty, including 96% uptime guarantee and 12 months Preventive Maintenance Pedoy Uw Emjpfx Am Tspw £540,000 C – machine to original specification including full pallet system and full tool change system New guarding. CE marking 12 months full warranty, including 96% uptime guarantee on machine but excluding pallet and toolchange system £650,000

Condition: refurbished (used), Year of construction: 1998, workpiece weight (max.): 15,000 kg, travel distance Z-axis: 1,000 mm, chuck outer diameter: 1,750 mm, spindle speed (max.): 400 rpm, turning diameter: 2,100 mm, turning height: 1,350 mm, rotational speed (max.): 3,000 rpm, feed force Z-axis: 50,000 N, year of last overhaul: 2026, The Millennium provides very high precision turning and versatile machining capability. Always precise, always powerful. Features of this machine:- – Involute chain drive for very high speeds, very low noise – a 36” diameter Timken cross roller bearing, the ultimate bearing – see last page – All steel 1750mm dia. 4 jaw chuck for high speeds. Maximum loading 15,000kgs. – A servo powered C axis control that provides backlash free C axis movement – high power and high accuracy Podpfx Amsy Uwxto Tjpw – 200mm square forged steel ram - high accuracy heavy cutting when required and incorporating a 15KW ISO 50taper live spindle providing speeds 20 to 3000rpm for rotary contour milling, pcd drilling and angle milling and grinding with attachments (new heads can be provided to order). 1350mm maximum height under ram – Automatic pick up of turning tools, live tools and attachments from the 18 pocket tool magazine – Raise and lower crossrail - high precision latching and clamping at 200mm pitches – flexibility without loss of accuracy Fanuc 18Ti. A very precise, powerful and versatile machine tool. Performs all functions shown in photo gallery 12 months guarantee

Condition: excellent (used), Year of construction: 2003, operating hours: 8,000 h, functionality: fully functional, feed length X-axis: 3,500 mm, feed length Y-axis: 2,800 mm, feed length Z-axis: 1,500 mm, workpiece weight (max.): 35,000 kg, spindle motor power: 120,000 W, spindle speed (max.): 4,000 rpm, turning diameter: 4,000 mm, total height: 3,100 mm, rotational speed (max.): 180 rpm, workpiece diameter (max.): 4,000 mm, Equipment: documentation/manual, A STARRAG DORRIES 2VC2800/280MC-FC-V CONTUMAT High-Production 4/5 AXIS Vertical Turning Centre with Siemens 840D cnc This is not a machining centre with a turning table but a real high power, heavy duty vertical turning machine with the high power turning table on a massive base with guideways to provide a Y axis This configuration enables the machine to turn a round component to its maximum diameter and machine a square component to a similar dimension – and many more possibilities in between Podjy Uwg Rjpfx Am Topw If a DS CNC swivelling head would be purchased from DS this machine is ready for huge 5 axis work. For large precise and complex components in these industries this is the perfect ‘one stop’ machine Defence, Aero Engine, Nuclear, Turbines, Rail, Oil and Gas, Pumps, Gearboxes, Rockets etc. 12 month guarantee. PAYMENT PLAN AVAILABLE

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 104440, Please provide us with your offer price. A total of 6 Emag machines are available (same type). Sales are only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Technical data can be found in the attached handout. Ppsdpfxeyh Sc Ns Am Tew All warranty rights are excluded. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations. No sales to private individuals.

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Ppjdpfozmm Dgsx Am Tow

Condition: excellent (used), functionality: fully functional, 1 x Tailstock lathe Precision engineering PM 1-FZ Equipment: - Hand lever cross slide with Tripan quick-change system - Electric tailstock for drilling and threading - Collet chuck with draw-in collets Technical data: - Spindle bore: 23 mm - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Distance between centers: 160 mm - Maximum diameter over bed: 220 mm Accessories: Pjdszl Dr Eopfx Am Topw 20 x Draw-in collets 359 E K 23 (1 - 20 mm/ 1 mm increment) 1 x Draw-in collet in tailstock 319 E K 12 1 x Tripan tool holder with 1 cassette Operating manual (copy) Additional accessories, such as collets, are available at an extra charge. The machine can be inspected while powered on.

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Ppjdpfjzibgzsx Am Tjw Technical details are shown on picture.