Used Woodworking Machinery for sale (84,461)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15151, Working width: 330 mm Min./max. veneer thickness: 0,4-0,8 mm Voltage: 400/3/50 - 480/3/60 - finger form VARIO 3 - rewinder for roll with encoder - Winder Start-Stop by fotolights - electronic controlled by EATON PLC and touch panel - encoder for tape infeed Ibjdpfx Agjxclc Ts Nsc - FESTO valve block with plc connection - automatic start with sensor - - transport speed up to 130m/min adjustable through inverter - new white/grey colour RDS 240 80 05 - Labeling, marks and panel language in English, manual in English - electric and pneumatic in english - perfect working requires flat veneers with parallel cut edges Technical Data with winder: min. veneer width: 80 mm max. veneeer width: 330 mm min. veneer length: 340 mm veneer thickness: 0,4 - 0,8 mm transport speed: 60 - 130 m/min winding core: Ø 200 mm max. winding: Ø 700 mm compressed air: 7 - 9 bar air consumption: 60 - 100 NL/min power: 480(400)V 3Ph 60/50 connected load: 4 kW

Year of construction: 2009, condition: ready for operation (used), A flexographic printing, slitting, die-cutting and gluing system with bundle ejector (Flexo Foldergluer) for corrugated board production and processing DY Machinery is available. Processes: Feeding, printing, creasing, slitting, die-cutting, folding, gluing, bundle ejection. Production speed: 220 sheets/min, max. sheet guide X/Y: 1200mm/2750mm, max. printing area X/Y: 1170mm/2700mm, min. sheet dimensions X/Y: 320mm/600mm, total system weight: approx. 42t. 1) Belt feeder with vacuum, dust separator, speed indicator and alignment device. 2) Top-side flexo printing with draw roller transfer, ink stop sensors and automatic cleaning. 3) Creasing and slitting unit with trimming and glue flap knife, slitting knife thickness: 8mm. 4) Rotary punch with polyurethane anvil and soft punching system, punching dimensions: +/-25mm. 5) Downward folding and gluing unit based on VALCO VC 350 AG system. 6) Top stacker with bundle retention system for bundle ejection. 7) Central control system ACCS-2000 with an order storage capacity of 100,000. The entire system has a remote control system for the flexo units, folding and gluing unit and bundle ejector. Documentation available. On-site inspection is possible. Expected to be available from October 2025. Ibjdpfou S I D Rex Ag Noc

Condition: new, Year of construction: 2025, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,900 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (max.): 10,000 rpm, total width: 7,170 mm, total height: 4,620 mm, total length: 4,390 mm, table length: 2,500 mm, table width: 1,600 mm, table load: 10,000 kg, tank capacity: 24 l, tool length: 200 mm, tool diameter: 300 mm, THE MACHINE IS FULLY PREPARED FOR SHIPMENT FROM THE SUPPLIER'S WAREHOUSE IN CHINA. DELIVERY TO EUROPE: 1–2 MONTHS. PRICE INCLUDES INSTALLATION AND FULL WARRANTY. The GMF 2519T gantry machining centre is ideal for heavy-duty roughing (removal of large material volumes) as well as finish machining (final, high-precision processing) of large workpieces. In addition to these operations, the machine can perform: milling, drilling, boring, countersinking, reaming, rigid tapping, and other operations. Key Advantages - High-precision and productive machining of simple and complex parts. - Stable machining process with excellent repeatability. - Remote diagnostics and data management. - Wide range of configurations and accessories. STANDARD EQUIPMENT OF HT5L MACHINE - Fanuc Oi-MF CNC control system - CNC package for high-speed mould machining - Spindle BBT50 – 10,000 rpm - Tool magazine with 24 positions - Air-conditioned electrical cabinet - Spindle oil cooling system - Standard work area guarding with open top Iodpfx Aexbd Ifeg Nsbc - Swivelling operator panel for machine and CNC system - Chip conveyor with integrated tank - Automatic lubrication system - Three-colour signal tower - Air blow gun - Coolant gun - Standard service tool set - Oil separator - Renishaw TS27R probe - Operation manual – mechanical part - Operation manual – electrical part - CNC system operation guides - BT50 taper test arbor for machine geometry check - CE-compliant design

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: KB-20211022002, 1 x Hangzhou Kuangbo Machinery Equipment Co. Ltd 2000L beer tank, previously used as a brite tank but can be used as an FV. Ijdpfx Agjwl H Nis Nsbc Technical Specification: Model - KBBFT1300A. Serial number - KB-20211022002 Date of manufacture - 2021. Capacity - 2000 litres. Notes: All 1.5inch Tri Clamp connections other than DIN PRV port on top, manway door, and larger triclamp Features: Port on top for dry hopping etc. 2x thermowells, one for a thermometer at front and one for temp sensor in back & a CIP arm on the RHS, with sprayball.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Ijdpfowg Sgcsx Ag Nobc Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 95610, Horizontal infeed drumchipper, 6 knives, el.motor 90 kW, infeed opening width 660 mm, drum diam 900 mm, weight 5 tn Iedpfxoxfr Izj Ag Nobc On delivery condition - checked and cleaned, together with chipper can be delivered infeed vibro conveyor

Year of construction: 2012, condition: good (used), functionality: fully functional, Pipe production line with accessories. Output: 350 kg/h PE. Extruder Ø90. Head Ø110–225. Calibrators. Vacuum tank L-6m, tank L-6m, 2 cooling tanks, haul-off, knife, take-off device. Ibjdpfsxdizvjx Ag Nsc

Year of construction: 2011, condition: ready for operation (used), X-axis: 300mm, y-axis: 620mm, z-axis: 400mm, positioning accuracy: ±0.005 inch, repetition accuracy: 0.005 inch, rapid traverse: 25m/min, feed rate: 10m/min, air pressure: 6kg/cm², air consumption: 400l, pump motor: 30W, delivery rate: 2.2cm³/s, pump pressure: 8kg/cm², tank capacity: 2l, pump electrics: 220V/ 3PH/ 1.2A, max. delivery rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 3000mm, width: 2050mm, height: 3020mm, weight: 3020kg. max. flow rate: 130l/min, control: Heidenhain TNC 620, connected load: 15kVA, length: 2984mm, width: 2050mm, height: 2420mm, weight: 3020kg. Operating hours control: 22,261h, machine: 22,414h, programme: 10,507h, spindle: 7695h. Fully functional, spindle was recently replaced, the built-in oil skimmer in the cooling water tank is not functional. With documentation. On-site inspection is possible. Isdpfxswc A Rks Ag Nsbc

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. The line consists of: - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: Iodpfx Asxhf R Isg Nobc This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 39035, National Machinery 750 S3 Operational - Working 5 FORGING STATION Supplied with control process and soundproof cabin Machine Size: 750 S3 Number of dies and punches: 5 Total heading load (kN): 2730 Number of strokes/min. (min/max): 90 Cutoff diameter: 22 mm. Cutoff length (min/max): 4,75/80 mm. Kickout stroke - die (min/max): 19/100 mm. Kickout stroke - punch: 52,4 mm. Ibedpfx Agetnhp Re Noc Motor size (kW): 55 Net weight (kg): 41.500

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Ijdpfsp I I U Dsx Ag Nebc Weight: 185 kg.

Condition: excellent (used), Year of construction: 2019, Wanrooe Grinding Line Year 2019 Consisting of a single shaft crusher, a conveyor elevator of approximately 4 meters with suction installation Isdpswqtuisfx Ag Njbc

Year of construction: 2015, condition: used, Plastic crusher, power 55 kW, capacity 600 kg/h Ijdjxdibvepfx Ag Nobc

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, ID BYP01 We sell a used Chinese - PP melt-blown fabric extrusion line for melt blown, make: Zhangjiagang Sevenstars Machinery Co., Ltd., MFG 2020. It was used for a short time. excellent condition. All EU import duties have been paid. Output max 400 kg per 24 hours. General description: 1. Product size: PP melt blown fabric with width at 600mm (after trimming 17m*3) Iodpjuiq Dhefx Ag Njbc 2. Main Material: PP compounding material 3. Extruder type: SJ65/33 single screw extruder 4. Output capacity: 350-400kg/24hour 5. Electric power supply: 3phase, 380V; 50Hz 6. Additional equipment: • Vacuum feeder • Raw material dryer • Mesh manual filter • T-mould for melt blown fabric • Static electrical discharge equipment • Belt type forming 850mm • Collecting device • Winder and slitting Model L/D Output Speed of Screw Rotationl Power Center Height SJ-65 10-33 80-150kg/h 20-120r/min 18.5kw 1000mm This line contains the following machines: Automacic vacuum loader ZJ-400 and hopper dryer make RHONG model RDM-25, MFG 2020; Single screw extruder, model SJ65/33, MFG 2020; Heating oven for hot air, model HJGF101-4, MFG 2020; Extrusion T-mold, model: SUS630, made in Japan, MFG 2020; Forming device, MFG 2020; Winder & slitting system, MFG 2020; Oil free air compressor, MFG 2020; The PP melt blown nonwoven production line is a polymer melt extruded from a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form very fine short fibers, which are aggregated to A web is formed on a roller or a screen curtain, and is finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used in mask filter materials, thermal insulation filling materials, medical health materials, wiping materials, etc. The finished product can pass the N95 standard as the core material of the mask. Process of melt blown nonwoven production line Polymer preparation --- Melt extrusion --- Metering pump --- Melt blown die head assembly --- Solution thin-flow drawing --- Fibber cooling --- Auxiliary network --- Electrostatic electret --- Reinforced finished product. Melt-blown cloth is produced by melt-blown process. The equipment mainly includes: screw extruder, melt pump, screen changer, melt-blown device, winding device, air system (hot air blower and heater), etc. The function of the screw extruder is to melt the slice material; the role of the melt pump is to accurately measure, control the output and the fineness of the fiber, and continuously and evenly transfer the melt to the spinneret. The function of the screen changer is to filter out impurities in the melt so as not to block the spinneret holes. The function of the winding device is to pack the melt blown cloth into rolls. The function of the air system (hot air blower and heater) is to provide the temperature and pressure of the hot air used in the drawing of the spinning air stream. Price Euro 39.200 Euro + VAT, negotiable, FCA: Oradea / Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), functionality: fully functional, conveyor belt length: 3,300 mm, conveyor belt width: 450 mm, Length: Diagonal: 130 cm Ijdpfx Agjv Rbbro Nobc Horizontal: 200 cm Width: 45 cm Height of crossbeams: 4 cm

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm Ibsdpfsprfbusx Ag Nec engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 06795, Horizontal infeed drumchipper, drum diam 700 mm, infeed opening width 570 mm, el.motor 75 kW, 4 chipping knives. Iedpfoxcphyjx Ag Nebc Chipper can be delivered together with infeed vibroconveyor with metaldetector

Condition: like new (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: YF-240, type of input current: AC, Equipment: documentation/manual, In 2022 we purchased a new line, but the business direction changed and the line was never unpacked from the containers. The line is stored in 40HQ*3pcs container and in one 20GP container. Production capacity:220-300kg/hour WPC production line is applied to produce wood plastic composite products, like WPC decking, WPC door frames, WPC skirting and so on. by changing screw barrel and molds, it can produce both PE PP type WPC products and PVC type WPC products. features of wpc production line: - adopts double step production, first compounding & granulating, then extrusion - adopts bimetallic screw barrel, high hardness, more wearable - adopts parallel twin screw extruder for compounding & pelletizing, good exhausting effect, better plasticizing effect Please view all the technical specification in attachments. Ibodoxb R Aijpfx Ag Nsc

Condition: good (used), Year of construction: 2015, functionality: fully functional, total width: 1,500 mm, total length: 4,800 mm, Separation tank, capacity 1500 kg/h Ibodpfx Aoxdhuueg Noc

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1902038, grinding length: 1,000 mm, grinding width: 500 mm, total height: 400 mm, The machine is working perfectly, currently the system is not in operation. Ibsdpfx Aovyf H Rjg Noc

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 200 mm, Working area: 3,200 x 2,100 x 200 mm Milling machine; ATC milling motor 9/12Kw Cutter name: HSK63F Drilling unit: 9 vertical and 8 horizontal grooving saw: 2 pieces ( X & Y Axis ) Ibsdpfswlqrnjx Ag Njc Vacuum pump: Becker 5.5Kw VTLF Software; PegasusWorks Milling-Nesting Lubrication: centrally automated ( Grease ) Standards: EUROPE EG2023 ( CE Declaration ) total power: 21.3 Kw other working areas: 1,300 x 2,600 | price € 36,500,- 1,600 x 3,200 1,600 x 5,200 2,100 x 5,200 if you use other dimensions in the X-axis, always negotiable contact us for, price and delivery times

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg Isdpfx Agskahu Rs Njbc - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, Regranulation line. Automatic screen changer. Ijdpexdhunjfx Ag Nsbc

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 40 h, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 130 mm, workpiece weight (max.): 1,800 kg, rotational speed (max.): 24,000 rpm, HIGHLIGHTS - Robust, fast and versatile machining center - Precision thanks to powerful CNC control and servo motors - Automatic alignment TECHNICAL DETAILS Area of application: Processing many types of materials with great precision X-axis feed length: 3,200 mm Y-axis feed length: 1,550 mm Z-axis feed length: 130 mm X-axis feed speed: 50 m/min Y-axis feed speed: 50 m/min Z-axis feed speed: 15 m/min Workpiece capacity Max. workpiece weight: 1,800 kg Max. workpiece height: 120 mm Drilling depth: 77 mm Spindle Spindle motor power: 9,000 W Speed (min.): 500 rpm Speed (max.): 24,000 rpm Dust extraction Tap nozzle diameter: 150 mm Warranty Warranty period: 12 months MACHINE DETAILS Overall length: 16,000 mm Overall width: 3,100 mm Overall height: 2,100 mm Electrical specifications Input current: three-phase Input frequency: 50 Hz Air and pressure Air pressure: 6 bar Pressure: 6 bar Vacuum pump Power: 5,500 W EQUIPMENT - Powerful CNC control - Automatic alignment Ijdsvu A Egepfx Ag Nobc

Condition: used, Year of construction: 2011, functionality: fully functional, total length: 6,000 mm, Cooling trough, length 6 m Ibedpfjxdhtkox Ag Noc