Used Worm Hackers for sale (302)

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE Nlodpetxitvsfx Ah Usk U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm Nsdpscht Nyefx Ah Ujlk over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 spare parts dimter in stock equipment in stock accessories in stock

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 10930 Table diameter: 315 mm Table height: 135 mm Transmission ratio: 90 : 1 - Hand crank with index plate and lever - Scale ring for reading at the hand crank - Readable degree scale on the rotary table - Swivelling worm for direct indexing - Clamping via clamping lever Nljdsxf Uytjpfx Ah Uok - 14 mm T-slots in the table plate - Built-in index plate 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Year of construction: 1997, sheet width 3020 mm plate thickness 4.0 mm Opening width / upper beam 350 mm Adjustment folding beam 100 mm adjustment of lower beam 80.0 mm bending angle max. 130 ° work height max. 900 mm Control SIEMENS OP 7 voltage 400 V total power requirement 9.5 kW weight 5400 kg range L-W-H 4300 x 2400 x 1780 mm Furnishing: Nledpfoxacgksx Ah Ujk - SIEMENS - PLC control model OP 7 * Bending process as a controlled, fully automatic, or semi-automatic workflow can be selected * Bending angle adjustment electronically preselectable 0-135 ° - electr. / controlled backgauge X = 1000 mm * with large sheet metal support surface - heavy welded construction - all drives both. via worm gear - Motorized adjustment of the bending beam - large adjustment range of the cheeks - hydraulic upper tool clamping - Insert / bending tools - Operation manual * Special accessories included: - separate split goat foot splint H 170 mm * Machine video: - ?v=C3rwhUDtOKw

Condition: excellent (used), Geared motor, electric motor, electric geared motor, worm geared motor, bevel geared motor, bevel geared motor -Condition: unused -Manufacturer: SEW-Eurodrive, bevel gearmotor with brake -Type: K77 DRE132MC4BE11/TF -Translation: i= 7.24 -Speed: 203 rpm -Power: 7.5 kW -Protection class: IP55 -Shaft: Ø 50 x 100 mm on both sides -Brake: 55 Nm Nsdpfxjt Ult Aj Ah Uslk -Number: 1x motor available -Price: per piece -Dimensions: 860/410/H290 mm -Weight: 132 kg/piece

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Nsdpfeudb I Tox Ah Uslk

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 Nodpfjudi Unox Ah Ujlk 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: like new (used), Year of construction: 1989, machine/vehicle number: 13.152, 3 axis CNC heavy duty roll/turbine lathe WALDRICH SIEGEN, model DH 1600 x 12000, max. work piece dia. 1.600 mm, max. turn lengths 12.000 mm, max. work piece weight 40 t, hydrostatic guide ways in Z and X, C axis in the face plate, hydrostatic worm drive, 2 chip conveyor, machine in as good as new condition Option: new CNC Control SINUMERIK 840 DsL, new Electric, new axis motors, Njdpfx Ahed Thn He Uolk new wiring and installation and commissioning in customers plant

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical data: - Capacity: 32,000 bph on 1.5L - Formats: 1500 ml - Filling product: Water and Non-carbonated drinks - Blowing/Filling/Capping: COMBI - Closure system: 26.7 mm plastic screw caps Equipment includes: Preform hopper – M. Tanner AG / Prologic Cap hopper – Gassner Nsdpexxbl Nofx Ah Uslk Preform orientator – M. Tanner AG Blow moulder – Krones Contiform S20 Filler – Krones Volumetric Nitrogen doser – Cryotech International Capper – Krones Bottle inspector – Krones Checkmat Bottle conveyors – Krones SynCo Labeller – Krones Etima Coder – Markem SmartLase C350 Shrink-wrapper – Ocme Vega N70/2 Handle applicator – Comag/Decimo HM 100/2 Pack conveyors – Europool Palletiser – Ocme Pegasus M400 Pallet wrapper – Bema Silkworm Turbo Pallet label printer/applicator – Bancale Eidos 7P6ERL

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling Nledoxabzyopfx Ah Usk lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 15 - 70 U/min total power requirement 1,8/2,2 kW weight of the machine ca. 0,71 t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m ACTION PRICE!!! High-performance vertical circular saw hydropneumatic fully automatic.(20192) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system Nedpfxjd Iin Hj Ah Uelk · Large chip drawer · Chip removal brush in the saw blade protective hood MPS control: · Save cut start/end · Display of current consumption, number of pieces, cutting time... · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

Condition: good (used), Year of construction: 1987, Gearbox, spur gear, angle gear, worm gear, adjustable gear motor Nlodpfot Iyuzex Ah Uek -Manufacturer: VEB, type 10 UO-50x30 oLTGL 258/4 -Translation: i = 30 -Shafts: Ø 25 x 60 mm / Ø 14 x 30 mm -Number: 1x gearbox available -Price per piece -Dimensions: 200/180/H170mm -Weight: 9 kg/piece

Condition: new, Year of construction: 2025, A strong, big band saw for metals with a swivel arm, enabling cutting in the plane perpendicular to the axis of the cut material and at any angle from -45° (left) to + 60° (right). Band saws are perfect for cutting tubes, profiles and other materials. Product features Nedpfx Ahei D Ddis Uelk Material cut can be fed manually or by any feeding device, with automatic tool feed. Appropriate cutting speed (band speed) is obtained through a change on a control panel. Rigid construction arm is made of profiled cast iron. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear carbide guides. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a -45° to + 60° swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band size - 2720×27×0.9 mm Band tension - mechanical (manual) Band speed - 36, 72 m/min Arm lowering control - stepless – hydraulic cylinder Vice base height - 765 mm Minimum material length in vice - 100 mm Power supply - 3-phase, 400 V Total power - S1 100%: 1.5; S6 40%: 2.1 Cooling pump motor power - 0.025 kW Weight - 370 kg Warranty - 12 months User manual - yes CE declaration - yes Angle 0° --- ø250 310×210 240×240 45° R ø200 200×140 180×180 45° L ø165 185×145 160×160 60° R ø120 120×95 100×100 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2025, Compact, fully automatic band saw (also miter cuts up to 45°) Torsion-resistant, robust cast iron saw frame Driven chip removal brush Powerful industrial worm gear motor Nsdpfotpg Sajx Ah Uolk Automatic shut-off after cutting and subsequent raising of the saw frame to the continuously adjustable, preset starting position Mechanical saw blade tensioning with electrical blade breakage monitoring Minimum remaining piece length 180 mm, smallest possible diameter 5 mm Feed accuracy of 0.2 mm Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Including saw blade with combi-toothing 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 12-month warranty for single-shift operation Motor: Three-phase, 400 V, pole-changing (kW) 1.1/1.5 Saw blade dimensions (mm) 2720 x 27 x 0.9 Flywheel diameter (mm) 300 Cutting speed (m/min) 40 – 80 Clamping width (mm) 275 Working height (mm) 768 2220 x 1650 x 1730 mm Weight (kg) 495 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Rotary Table WMW Type D 315 k Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Hand crank with indexing plate and scissors - Scale ring for reading at the crank - Readable degree scale on the rotary table - Swing-out worm for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table plate - Universal joint drive - Built-in indexing plate: 17-25-30-39-47-57 - Rotary table drive suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E - Dividing head (indexing plate = 20) suitable for WMW HECKERT console milling machine Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Nlsdpexcbpisfx Ah Uok Good condition

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device Nledpfx Ajxaaxdoh Ujk - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: new, cutting diameter 170 mm dimensions of saw-band 2080 x 20 x 0,9 mm table height 880 mm cutting speed 40 + 80 m/min 170 mm 125 mm 150 x 190 mm 95 x 120 mm total power requirement 1,1 kW weight of the machine ca. 0,24 t Dimensions (LxWxH) 870 x 1.550 x 1.740 mm mm Nlsdpog Trvrefx Ah Usk This metal band saw comes with a closed worm gear. It also has hydraulic pressure control and a base frame that can be rotated through 45 degrees. Other features include emergency stop, the complete cooling system, the factory base frame, automatic switch-off and the quick-release device.

Condition: used, Miter left 60° + right 45° Hydropneumatic control of the saw unit Electropneumatic material feed unit Smooth-running, high-performance worm drive with a large gear ratio, integrated into a robust cast housing for optimal cutting results Clamping fixture with double clamping arm for burr-minimized cuts, additionally featuring a lateral quick-shift for miter changes Precision prism guide for the gearbox head, laterally adjustable Especially stable base frame with integrated automatic cooling and large chip drawer Nedexfr Nlspfx Ah Uslk CNC control: By entering various parameters such as quantity and material length, the CNC version is the ideal solution to optimize workflows.

Condition: new, Year of construction: 2025, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Nsdpfx Ahjw U Skvj Uelk Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min turning speeds 1,2 - 12,0 U/min bore 20,0 mm weight of the machine ca. 50 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. Nsdexaatnepfx Ah Uslk - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Nedpfx Aefmck Hsh Ujlk Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts Optional base frame 361 euros

Condition: new, Year of construction: 2025, Powerful Band Saw equipped with a movable arm that can rotate from -45° to +60°, a portable vice with quick-locking mechanism, a strain gauge for band tension, and a hydraulically adjustable arm with smooth regulation. Additionally, it features an ergonomically designed control panel, ensuring safety and comfort during operation. The maximum cutting width is 490 mm. Key Features of the Band Saw: The band tensioning wheel is equipped with a dial strain gauge that indicates the proper band tension, ensuring optimal results and blade durability. The saw frame is rigid, made of cast iron, and resistant to twisting. High-quality drive wheels are mounted inside, on which the cutting band is mounted. The control panel is ergonomic, with clearly placed buttons such as the main switch, start, stop, cooling, and band speed control buttons (slow/fast). Additionally, the panel features an emergency stop button that complies with the latest EU safety standards. The panel column contains hydraulic actuator controls, enabling precise regulation of the arm's descent speed and turning it on/off. The drive is stable, thanks to high-quality hardened and ground gears. The powerful motor is appropriately matched to the sizes of the materials being cut. The band’s guidance is reliable due to bearings in the guides that can be adjusted according to the width of the material being cut. The saw is equipped with a mechanism for automatic shut-off when the arm is lowered. The vice is solid and securely holds workpieces. A limiter for cutting workpieces is included in the set. The hydraulic actuator is reinforced, allowing precise adjustment of the arm's lowering speed using a potentiometer. The saw arm can rotate from -45° to +60°, with the lifting force adjusted using a spring. An efficient cooling system is built into the base of the saw. Workpieces can be quickly clamped in the vice. The vice can be adjusted on both sides, enabling cutting at different angles. The set includes a coolant tank with a pump. The saw’s solid body is made of cast iron, ensuring stability during cutting. The band saw's arm can be locked. The base is rigid, allowing operation at a height of approximately 95 cm, which is standard with the saw. Additional Advantages of the Band Saw: Nlsdpfx Asv R Tgtsh Uek Other features include band speed regulation (35/70 m/min), quick-lock vice, movable saw arm from -45° to +60° with a scale reading, a fully functional device with an excellent price-to-quality ratio, a solid construction ensuring precise, quiet, and vibration-free operation, infinitely adjustable hydraulic arm lowering, durable carbide roller guides, reinforced worm gear with bronze components, automatic end switch, and a liquid cooling system as standard equipment. Technical Specifications: Working height: 870 mm Cutting speed: 35/70 m/min Band saw dimensions: 3770 x 34 x 1.1 mm Band saw width: 34 mm Cooling system pump power: 0.1 kW Total power: 2.8 kW Voltage: 400V Dimensions (width x depth x height): 2200 x 1400 x 1500 mm Weight: 630 kg

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode Nlsdpoxaa Uljfx Ah Uek - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW weight of the machine ca. t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204) Nlodpfsd Iin Ejx Ah Ujk

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 Nlsdpfx Aovuf S Neh Ujk 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.