Used Xas 87 for sale (4,884)

Condition: used, axle configuration: 3 axles, first registration: 02/2021, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,675 mm, loading space volume: 87 m³, Chassis Manufactured in a self-supporting aluminum construction with corresponding reinforcements in the lower chord for particularly high stability and strength, unit chassis made of aluminum, 140 mm frame height! (max. 39 tons) Giedpfxsxuy I Ie Abdol Axles and suspension: 22.5-ton disc brakes Jost axle assemblies, 3 x 9-ton with DC air suspension, ken, Wabco Smartboard, electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment), 1st and 3rd axles separately liftable with traction control (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires size 385/65 R 22.5, manufacturer's choice on Alcoa aluminum rims, satin, 11.75x22.5 ET120 Seatposts Aluminum drop-lift supports, Alu Leg, with 2x10-ton drawbar load; we use swivel feet for the air suspension Braking system according to E.G. Standard, dual-line braking system, Wabco EBS system with RSS (Roll Stability Support) system, spring-loaded braking system acting on two axles with rear controls, aluminum air chamber system, premium modulator Electrical system Compliant with the German Road Traffic Licensing Regulations (STVZO) guidelines with two Aspöck Europoint III LED five-chamber lights integrated into the aluminum rear end, 24-volt system with one 15-pin and two 7-pin sockets, with LED side marker lights, two separate LED work lights at the rear, and two LED work lights on the sides. At the height of the seat posts, 1 LED work light inside, front left, can be operated from the outside. Body/Trough "Fully welded body" Front wall load 17,250 kgf/cm², rear and side walls 10,250/13,400 kgf/cm², aluminum body, side walls made of 30 mm thick aluminum plank profiles (2-3 mm), 600 mm wide, fully welded with lower and upper chords, plank profiles fully welded inside, floor as a moving floor system on 140 mm aluminum cross members, cross members mounted closely together (approx. 350 mm), aluminum front wall with 600 mm plank profiles, 2-3 mm thick, straight design, special aluminum corner profiles, smooth rear wall, straight design, with two aluminum wing doors, 50/30 mm thick, with 4 espagnolette locks in the welded-in design. Aluminum rear frame mounted on Teflon bearings and stainless steel bearings, a sliding aluminum wall suspended from the reinforced aluminum top chord with a Kevlar tarpaulin for complete emptying, side brush seals and an additional Kevlar tarpaulin, an integrated grain hopper with a cover plate, operable from the outside with a viewing window at the rear left, and two test slides in the rear doors. "Cargo Floor" 24-Board Hydraulic System Moving floor system in the floor with hydraulically operated aluminum profiles mounted on square aluminum profiles with approximately 880 PE-HD sliders, approximately 6 mm smooth floor, hydraulics with approximately 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves of a size and design to be specified, operating pressure 190 - max. 240 bar, aluminum End pieces welded into the floor, rear left control with remote control in a lockable, waterproof box, without hydraulic hoses. Accessories PVC fenders with rubber mud flaps, aluminum spare tire holder, folding aluminum side bumpers, 1 plastic toolbox approx. 800x460x430 mm, approx. 3.7 m aluminum ladder, 680 g/m² roll-up tarpaulin with a roll-up tarpaulin system including a

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 065014, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, Measuring range X/Y/Z: 800 / 1000 / 700 mm Max. length measurement deviation: MPEe = 2.7 + L/300 µm Gisdpfxox Au Hnj Abdel Probe head: PH10M, Renishaw TP200 Accessories: HT400 control unit, reference sphere, 18-piece set of styli/extensions, rack for stylus change Software: Quartis R2025-2, including additional modules Quartis Surf and Curve for measuring surfaces and curves, without PC Last maintenance: 12/2021, acceptance report available in documents Very good condition, fully functional, documentation available Inspection at the facility is possible Sale without warranty, including transport packaging and loading, available from March 2026

Condition: good (used), functionality: fully functional, power: 32.5 kW (44.19 HP), fuel type: diesel, color: yellow, fuel: diesel, final compaction pressure: 7 bar, Year of construction: 2006, operating hours: 1,814 h, MACHINE: Compressor BRAND: Atlas Copco TYPE: XAS67DD PE ENGINE: Diesel, Deutz F 3M 2011 MAX. PRESSURE: 7 bar OPERATING HOURS: 1814 ID108898 Gisdpfx Ajxn Nuqjbdsl

Condition: good (used), functionality: fully functional, power: 26.5 kW (36.03 HP), fuel type: diesel, Year of construction: 2015, operating hours: 1,375 h, Atlas Copco XAS 67 kd year: 2015 Gjdpfxew S Ia Uo Abdoil running hours: 1375 3.6 m³/min max pressure: 7 bar weight: 740 kg Great running compressor ready for use.

Condition: used, Year of construction: 1986, length 1000 mm width 750 mm Equipment: - Measuring plate with T-slot Gisdpjxab Dhefx Abdjl - JFA accuracy grade 1+ - Permissible deviation 0.004 / Actual deviation 0.003

Condition: new, Year of construction: 2022, Equipment: PACE control, ECO mode, HardHat hood made of PE, Xc2003 control system Minimum temperature: -10 °C Dimensions base frame: 4844 x 1807 x 1892 mm (L x W x H) Unload speed: 1500 rpm Rated speed at full load: 1960 rpm Ambient temperature: 45 °C Motor power: 104 kW Gsdpfsii U R Dox Abdeil Flow rate (FAD): 10.9-9.7 m³/min Operating pressure range: 5-14 bar Compressor control flexible pressure and flow control: PACE Engine make / model: John Deere / 4045HI551 Compressed air treatment consisting of: Compressed air aftercooler, water separator and PD filter. Emission level: Stage V Number of cylinders: 4

Condition: used, Gear motor, electric motor -Speed: 87 rpm Gijdpfjclrxhsx Abdjl -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Price: per piece -Number: 1x available -Dimensions: 475/175/H180 mm -Weight: 20 kg

Year of construction: 2004, condition: good (used), Atlas Copco XAS 67 compressor 3.7 m3/min Gedpfoiywpzox Abdsil Number of hours: 2,371 h Deutz engine Type: diesel

Condition: ready for operation (used), A diesel compressor Atlas Copco is available. Year of manufacture: approx. 2015, max. operating pressure: 7bar, volume flow: 7.6m³/min, power: approx. 55kW, fuel tank: 117l, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1500mm, weight: approx. 1500kg. An on-site inspection is possible. Giedpoxn S Uajfx Abdsl

Condition: new, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,500 mm, loading space volume: 87 m³, Chassis manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower flange for particularly high stability and strength? Aggregate chassis made of ALUMINUM, 140 mm frame height (max. 39 tons), axles and suspension "disc brake 22.5", Jost axle units 3 x 9 tons with DC air suspension, lifting and lowering? Wabco Smartboard? electronic brake wear indicator (BVA) for display in the tractor unit (without tractor unit equipment)? 1st + 3rd axle separately liftable with traction aid (without tractor unit equipment), 3rd axle additionally with Optiturn, ECAS air suspension Tires and wheels 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice on Alcoa aluminum rims satin, 11.75x22.5 ET 120 (with steel + approx. 120 kg) Gedpfxegcw Rio Abdoil Seatposts Aluminum drop supports, Made of aluminum alloy, 2 - 10 tonne support load, we use swivel feet for air suspension Brake system according to E.E.G. standard, dual-line braking system, EBS E - system Wabco with RSS system (roll stability support), spring brake system acting on two axles with operation at the rear, aluminum air tank system, premium modulator Electrical system according to the STVZO guidelines with 2 five-chamber lights type Aspöck Europoint III integrated in the aluminum rear end, 24 volt system with lx 15-pin and 2x 7-pin socket, with side contour lights in LED design, 2 work lights at the rear, 2 LED work lights on the side at the height of the seat supports, 1 LED work light inside at the front left can be operated from the outside Structure/trough "structure fully welded inside" Front wall load 17,250 dkn? Rear and side walls 10,250/13,400 dkn aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside ! ! , floor as moving floor system laid on 140 mm aluminum cross beams, floor stacker load approx. 7 ton/m2 cross beams mounted accordingly closely (approx. 350mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design smooth rear wall in straight design with 2 aluminum wing doors 50/30mm thick with 4 rotating rod locks in the welded aluminum rear frame fixed in Teflon bearing and stainless steel bearing. ,running aluminum wall suspended in the reinforced aluminum top belt with "Kevlar tarpaulin" for complete emptying, side brush seal and additional Kevlar tarpaulin on the side, integrated discharge funnel with folding cover plate in the floor closure, operable from the outside on the left at the back, viewing window on the left at the back, 1 test slider in each of the rear doors, so 2 pieces, service door on the left in the front wall Hydraulic system "Cargo Floor" 24 board system - smooth design! Push floor system in the floor with hydraulically moved aluminum profiles mounted on aluminum square profiles with approx. 880 PE-HD sliders, approx. 8mm floor thickness, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the floor, power supply at the rear left with cable operation in a lockable waterproof box, without hydraulic hoses Accessories PVC mudguard with rubber mud flaps, aluminum spare wheel holder, side

Condition: excellent (used), functionality: fully functional, overall weight: 950 kg, color: yellow, fuel type: diesel, fuel tank capacity: 80 l, motor manufacturer: Deutz D2011L03, total length: 3,740 mm, total width: 1,410 mm, total height: 1,360 mm, power: 36 kW (48.95 HP), volume flow: 318 m³/h, operating pressure: 7 bar, pressure (min.): 4 bar, pressure (max.): 8.5 bar, noise level: 98 dB, Year of construction: 2016, operating hours: 1,190 h, next inspection (TÜV): 04/2025, machine/vehicle number: APP418299, Equipment: UVV, - Hood and body made of impact-resistant, robust polyethylene - Overrun and parking brake with automatic reverse function - Tool oiler Gisdpfjtwz Ezex Abdol - Choice of truck DIN towing eye or car ball head coupling, height-adjustable towing device Next pressure vessel test in accordance with Directive 87/404/EEC due in May 2026 If you have any questions, please contact us personally.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Measuring range: 800 x 1,000 x 700 mm Limit of length measurement uncertainty: E₀ = 2.8 + L/250 µm Condition: newly painted, desk shape with new worktop and current color design Gisdpfxjvupv Es Abdsl Control and operating elements CNC control: WPC Controller table: 1 piece Hand control panel: HT 400 Touch system: Renishaw PH10 Probe: switching probe Renishaw TP 20 Reference sphere: 1 piece Software and PC system Software: WM | QUARTIS GEO for regular geometry applications (as of 2022-1) CAD interface: WM I QUARTIS STEP import interface (as of 2022-1) Software dongle: 1 x Metrokey PC system: WIN 10 Monitor: 24 ’’ TFT

Condition: used, Gear motor, electric motor, electric gear motor -Manufacturer gearbox Pujol type: LBC-87 -Manufacturer motor VEM type: KPER80K4 Gisdpocxtbbsfx Abdel -Speed: 22 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 35 mm -Protection class: IP 54 -Number: 4x motors available -Price: per piece -Dimensions: 450/230/H290 mm -Weight: 33 kg

Condition: used, Year of construction: 1969, functionality: fully functional, Die-cutting platen, format 117 cm x 83 cm, with manual feed. The machine can be tested on site. Gjdsxn Rldspfx Abdsil

Condition: used, machine/vehicle number: 101506, Eyelett Thickness: 5,5 mm Projection 320 mm Activation via foot switch Working height 900 mm Gjdpfet Na Ecex Abdoil Cycle time/performance sec.0.50 sec Width 1,200 mm Depth 900 mm Net weight 420 kg Gross weight 480 kg very good condition short-term available

Condition: good (used), Oiling machine Hang 87 F, machine number 38960, 3 oiling heads, oiling diameter 5,5 mm, inner diameter 5 mm, waste suction device, in a good condition, immediately available Gijdpfx Ajilufqobdsl

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 971696, Technical dataManufacturer: WenzelType: LH87 / CNCYear of construction: 1997Machine no. 971696Measuring rangeX-axis: 800mmY-axis: 1000mmZ-axis: 700mmTouch probePH10MTouch probeType: TP20Control panel: HT400Control: WPC 2010 The machine can be modernized with new accessories according to customer requirements.Price: on request!assembly and commissioning possible!we will be pleased to provide you with a detailed offer!note: our offer is directed exclusively at specialist customers!(subject to changes and errors in the technical data, specifications and prices as well as prior sale!) Godpfx Absd Sv D Njdsil

Condition: ready for operation (used), Year of construction: 2005, Measuring dimensions X/Y/Z: 800mm/1000mm/700mm, max. workpiece weight: 800kg, measuring accuracy: 0.0005mm, repeatability: 0.002mm, measuring plate dimensions X/Y/Z: 1040mm/1780mm/250mm, rotary swivel head: Renishaw PH 10T Plus. The PH 10T was replaced in 2023. Documentation available. On-site inspection is possible. Godpfxju Ur Sqs Abdjil

Condition: used, Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers Gedpfx Abocmygyedoil -Transport roller width: 430 mm -Admission: 2-sided 15 mm -Number: 3 rolls available -Price: per piece -Weight: 4.7 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 12,000 h, functionality: fully functional, machine/vehicle number: 044238, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, 3D coordinate measuring machine TECHNICAL DETAILS X-axis: 800 mm Y-axis: 1000 mm Z-axis: 700 mm Accuracy: 0.8 + L /450 Control: WPC2030 Gijdpfxovmxyws Abdjl Software: WM, Quartis X3 FREEFORM Hand control: Wenzel HT400 with table and PC Probe head: PH10M Probe system type: TP20

Condition: ready for operation (used), Year of construction: 2011, operating hours: 1,264 h, Compressor Atlas Copco XAS 67 DDG, year of manufacture 2011, 1264 operating hours, volume flow 3.5 m³, emergency power 12.5 Kva, connections 1 x 230 Volt, 2 x 400 Volt, Ser.Nr.YA3062564B0166229, air filter diesel filter oil filter oil has been renewed, ABE and approval available Godpfx Aoqagx Sobdoil

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Godpfsu T Rhzox Abdjil

Condition: used, Machine vise, sturdy vise, drill vise -Jaws depending on the workpiece geometry: movable -Jaw width: 65 x 87 mm -Clamping depth: max. 15 mm -Weight: 4 kg Gsdpfsdparcsx Abdoil

Condition: ready for operation (used), Year of construction: 2012, Travel X/Y/Z: 800mm/2000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Giedpsw H Au Rsfx Abdel

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Gisdpfx Asw H Au Djbdol