Veneer press

OMC

Condition: good (used), Code: 0381 Brand: OMC - ITALY Model: PL/160 - CE Standard Hydraulic hot press with solid platens, heated by an electric oil boiler, for panels, veneer, woodworking, furniture, custom-made furnishings, wooden doors, composite materials, and various - CE Standard Platens dimensions 3500 x 1300 mm Solid steel perforated platens N°1 intermediate platen Max temperature 250°C Opening 400 mm N° 8 pistons - diameter 85 mm Specific working pressure 30/40 kg/cm² Total thrust 160 tons Heating by 3 diathermic oil boilers Laedpfx Aijy Nkuwjwjb Safety devices: perimeter safety cable, emergency stop button, two-hand control Automatic opening with timer Control panel Motor 3 Hp Power supply: 400 V / 50 Hz Overall dimensions mm 4200 x 1600 x 2250 h Weight kg 5500

Condition: used, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm Control ja weight 3300 kg Dimensions (L/W/H) 2600x920x1890 mm Dust suction hood 2x180, 2x120 mm Löwer DSM 2004 Double-Sided Sanding Machine ----- 4-Belt Sander + Disc Unit (Top/Bottom) Manufacturer's Description: ----- Double-sided, four-belt, single-wood sander for sanding solid wood such as window frames, etc. Highly stable, top-quality design with innovative details. Suitable for high continuous loads, even with high material removal rates. - Sequentially arranged grinding units for roughing, fine grinding, and finishing, each from above and below 1. Belt grinding unit with heavy steel roller 2. Belt grinding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see optional equipment below) - Direct-drive grinding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated grinding shoes with very good thermal conductivity and absolute dimensional accuracy Lodpfx Aovu Hgbjiwsab - External cooling of the grinding zones for cooler grinding and longer belt life - Forced pneumatically controlled grinding belt oscillation - Effective grinding dust extraction directly at the grinding rollers - Airborne dust extraction at the tension rollers - Integrated brushing and finishing unit with large grinding dust extraction - Motorized grinding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts with dust and Dirt protection - Chip removal adjustment at the bottom via precision threaded spindle with dimension display via scale ring (0.1 mm resolution) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release in seconds - Sanding belt tracking adjustment during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, non-slip and adhesive conveyor belts over heavy-duty cast iron tables with a finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent workpiece transport - Geared feed motor with infinitely variable speed 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: ----- - Sanding belt speed 22 m/s - Sanding belt length 1800 mm - Sanding belt width 200 mm - Working width 190 mm - Sanding thickness 2-180 mm - Four brake motors for drive 5.5 kW - Feed motor 1.5 kW - Feed speed 4-20 m/min - Automatic height adjustment 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports 2 x 180 mm, 2 x 120 mm - Extraction air velocity 20 m/s - Pneumatic connection 6 bar - Working height 870 mm - Length (with soft disc 2740 mm) 2600 mm - Length with control unit (with soft disc 3035 mm) 2985 mm - Width 880 mm - Height 1910 mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE compliant Equipped with the following special options: -----...

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, Single-head cutting machine OMC GIOBI 600 with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m and inlet conveyor PORTER 4,2m Year 2021 Condition: ex-demo, like new - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps Laodpjy Erwfsfx Aiweb - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Year of construction: 2021, condition: new, Single-head cutting machine OMC RONDA 700, new Machine in stock - saw blade D 700 mm Laodpfxohrukie Aiweb - hydro-pneumatic feed - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: used, machine/vehicle number: 008127, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON 1440 A Ledpfxsw Tq Iwo Aiwjab Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON 1440 A

Year of construction: 2021, condition: new, Single-head cutting machine OMC GIOBI 600, new Machine in stock - saw blade D 600 mm - hydro-pneumatic feed Lsdehrumaopfx Aiwoab - inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - spray mist blade lubrication system - integral pneumatic protection

Condition: ready for operation (used), Year of construction: 2025, stroke length: 400 mm, This OMC PL 90s veneer press was manufactured in 2025. It features a plate size of 3000 x 1300 mm, an upward stroke of 400 mm, and a press force of 90 tons on 80% of the surface. Equipped with Elkom electronic heating plates, it ensures a maximum temperature of 120°C. The hydraulic system includes a two-stage unit with noise reduction and a fast closing/opening pump. Safety features include a safety cable, emergency button, and two-hand operation. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Plate size: 3000 x 1300 mm • Stroke type: upward stroke (from bottom to top) • Plate type: elkom electronic plates • Press force: 90 tons on 80% of the surface • Press cylinder: 6 x Ø 70 mm • Specific pressure: 2. 05 kg/cm² on 100% of the surface, 2. 56 kg/cm² on 80% of the surface • Loading and unloading side: 3000 mm • Heating system: electronic 25. 4 kw, maximum temperature of 120°c • Automatic opening with timer Extra Information Hydraulic System Two-stage unit with submersible pump for noise reduction and lubrication of rotating parts. Fast closing/opening pump (high flow rate - low pressure 35 l/min), press pump (low flow rate - high pressure 1.6 l/min). 2 HP Electric Motor Control/Safety Valves: Maximum pressure valve, pressure retention valve (check valve), valve for low drain pressure (pre-drain valve), and oil drain magnetic valve. Control Panel and Electrical System 2 Temperature regulators for setting the plate temperature Pressure gauge for pressure regulation with automatic pressure equalization system General on/off switch Two manual safety buttons for closing the press Timer for automatic opening Switch to select manual or automatic opening of the platens after the work cycle Off/on switch for upper and lower platen resistance Safety Systems Timed bimanual control for closing the press Safety rope on all four sides of the press Lasdpfxoyalmbo Aiwjb Platen lock for maintenance Protective guards for the pinion and rack units Safety stickers and warning notices Operating and maintenance manual Complies with CE standards Press Structure Made of composite and welded steel Equipped with a rack and pinion guide system for perfect parallel movement during closing/opening of the plates. Elkom Heating Plate Electric plates with electric resistors Consist of a chipboard with an aluminum sheet mounting electric resistors Maximum Working Temperature: 120°C Maximum Thrust: 7 kg/cm²

Condition: excellent (used), Weinig Unimat 23 EL four-sided planer Working width 230mm Lasdorb An Uspfx Aiwjb Working height 160mm Head arrangement: Bottom 5.5kw Right 4kw Left 5.5kw Right 4kw Top 11kw Bottom 5.5kw Top 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Rollers driven in table Pneumatic pressure pads CE certificate Year of production 2003

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Max working width: 1300 mm Laodpfsv Akwgox Aiwjb Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8

Condition: new, Year of construction: 2023, pressing force: 120 t, total length: 3,000 mm, total width: 1,300 mm, operating temperature: 120 °C, cylinder diameter: 85 mm, opening width: 400 mm, Good morning, We offer for sale a brand new shelf press manufactured by the Italian company OMC model PL 105 Logic Control 30/13 To begin with, some useful information about the machine: * working area 3000x1300mm * opening width 400mm * 6 cylinders with a diameter of 85mm * total pressure of 105 tons Lajdpfx Aioqu U Hqjwjb * maximum heating temperature 120 degrees * logic control system * machine control from touch panel * readings of temperature, pressure force, shelf opening time, loading area calculator, programming of gluing processes - we will set it all from the panel * power 21KW * CE certificate * 2023 year of production * heating medium: oil with built-in heater. Machine brand new, available from stock.

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor Laodpfxomb U Tuj Aiwsb • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2022, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Lasdpfoimwp Ssx Aiweb Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: new, Year of construction: 2023, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Lajdpfx Aeiypzleiwob Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Ledpfxsw Tivme Aiweab Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Operating Units: 9 nr

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, We have a production line for UPVC profiles, they were purchased in 2010, they have only operated for 2 years, and now they are for sale because the company that had them has now closed. They were serviced before being stored. The machines are in Patras, Greece. Any operational check is welcome. (1) Aluminium and UPVC end milling machine OMC Maxima, (new never connect) (2) CNC automatic line UPVC CNC corner cleaning machine with 4 head horizontal welder - RISUS, RKT-8000 (3) UPVC bead saw - RISUS, RK-1080 (4) UPVC 4 Head vertical welder - HAYA, (5) UPVC 4 Head corner cleaning machine semi-automatic - WEGOMA, WPA4 (6) Single Head multiple corners welder machine -RISUS, RYL-1050 (7) UPVC profile Hot air bender /CBM, (8) 4 Machine benches, (9) ACCESSORIES SMALL TOOLS AND DIES (milling cutters for the machines, chisel etc.). There are spare parts available , as well as technical assistance, if needed. The selling price for all these machines together is at least 50,000 Euros plus VAT, if necessary. Ledpfx Aiewyvh Rewsab They do not sell independently. Collection from Patras, Greece (we have a fork lift truck to help if need)