Panel press

ORMA ORMA NPC DIGIT 3000/5

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Hedpfowrb U Tox Ah Ueg

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm 180 x 100 mm Working height 925 mm saw blade turning speeds 15 - 150 U/min total power requirement 5,5 kW weight of the machine ca. 0,615 t dimensions of the machine ca. 1,4 x 1,4 x 2,0 m Electro-pneumatic - semi-automatic vertical circular saw with micro Processor control for miter cuts from 60° left to 45° right. Basic equipment: •Saw head slides on recirculating ball linear double guides •Three-stage gearbox •continuously variable speeds 15-150 rpm Hjdofg Rldjpfx Ah Uog •Vice opening 190 mm • Stroke of the saw head can be programmed directly from the control panel for adjustment to the cutting material •Pneumatic vertical vice •Saw blade HSS DMO 5 Æ 370x32x3 for solid and profile material •Vise with counter-clamping device for double workpiece clamping •Base with removable coolant tray •Chip clearing brush •Length stop for cuts of the same length •Material support arm, at the same time connection option for roller conveyor/ loading side

Condition: ready for operation (used), Year of construction: 2010, Working height: 900mm (+/-50mm), max. roll weight: 70kg, max. roll width: 3200mm, cutting width: 3900mm/5000mm, cutting length: 5000mm, cutting speed: 1m/s, machine dimensions X/Y: approx. 7000mm/4500mm. Documentation available. On-site inspection is possible. Hsdpfx Ahsv Ifvze Uog

Condition: used, machine/vehicle number: 007346, Max working length: 3500 mm Hsdpfov Akwgex Ah Ujg Max working width: 1300 mm Heating System: electric Pressure Exerted: 2.35 Kg/cm2 No of Pressing cylinders: 8

Condition: new, Working width (finished size) 23 – 180 mm Working height (finished size) 6 -105 mm Min. length of single workpiece 300 mm Feed speed 6 – 12 m/min Motor power horizontal spindles 2 x 7.5 kW Motor power vertical spindles 1 x 7.5 kW Spindle speed 6000 rpm Spindle diameter 35 mm Clamping length vertical spindles 120 mm Clamping length horizontal spindles 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle 10 mm Los roller integrated in the outfeed table Suction DM 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick changeover Hjdpfx Ajiiv Dceh Ueg - Front vertical printing unit in front of the left vertical spindle - Feed table length 2300 mm - Tool package consisting of 4 planing heads and a joint rebate cutter

Condition: excellent (used), The CFS Krämer+Grebe 325-liter vacuum bowl cutter is a high-performance machine designed for efficient meat processing. Machine equipped with a cooking option. Hedpsu E Tlpsfx Ah Uog Main features: Bowl Capacity: 325 liters, suitable for medium to large-scale production. Motor Power: 138 kW, providing robust performance for demanding processing tasks. Cutter Blade Speed: Infinitely variable from 60 to 4,100 rpm, allowing precise control over the cutting process. Mixing Speed: Stepless, with forward and reverse options, enabling thorough and adaptable mixing for diverse products. Bowl Speed: Stepless control for optimized processing efficiency and flexibility. Cutter Bowl Design: Equipped with a raised cutter rim to enhance safety and minimize spillage during high-speed operation. Vacuum Functionality: Reduces air incorporation, improving product texture and extending shelf life. Noise Protection: Includes an electro-hydraulic V2A noise protection cover for quieter operation. Loading and Ejector: Features an electro-hydraulic loading system and an electro-hydraulic product ejector, streamlining loading and discharge. Knife System: Incorporates the GEA Top-Cut knife system with a quick-locking nut (Quick-Lock-Nut) for efficient knife head fastening. Cooking Device: Equipped with a cooking device, allowing for integrated cooking processes within the cutter. Construction: Made from durable stainless steel for longevity and hygiene. Control Panel: Equipped with an analog control panel for straightforward operation and precise control over cutting, mixing, and bowl speeds. Incl. Extra main motor (used, very good working condition), extra control panel and extra electric box with Lenze inverter (complete)

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable Hjdpfx Ahochhfus Ueg cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. Hedpfx Ahjlht Hzj Ujg F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Hsdpfx Ajiwkhksh Uog

Condition: good (used), Marble plate Length: 3500 mm Width: 1500 mm Thickness: 300 mm Height on feet: 930 mm Number of feet: 5 feet Hsdpfjig Hu Nsx Ah Ujg 1 small failure on the top (L 150 mm x W 20 mm) - see photo Weight: approx 3 T